Strange visual problem with Geforce4 ti4200

I have a Geforce ti4200 128 MB 4X running on a MSI KT4V-L motherboard. the processor is AMD 2600+ and i use WIN XP.
I cant manage to fix a problem which is the following: there are these faded, black, flickering, horizontal lines that run up the background of the screen.
i updated the geforce drivers and the motherboard drivers but nothing changed. i tried underclocking using RivaTuner...nothing. What could be wrong? i really need the help, thanx!

Maki,
it is one of two things. Either your Monitor died or your Vid Card overheated and damaged itself.
The only way you know is:
1)Try the monitor on another comp.
2)Try the vid card on another monitor.
Take Care,
Richard

Similar Messages

Migration Jdev 11.1.1.1 to Jdev 1.1.2, IDE visual problems with ADF design

Migration Jdev 11.1.1.1 to Jdev 1.1.2, IDE visual problems with ADF design
CONTEXT
I’ve been working my project with Jdev11.1.1.1, when I migrate to JDev 11.1.1.2. I realized that my project didn’t compile successfully as before besides I couldn’t see the design view in a WYSIWYG mode on my JSF pages.
I had installed (initially) in C:\oracle\Middleware Jdev 11.1.1.1 with WLS 10.3 (default in Installer)
A couple days ago I realized about the new Jdev release JDev 11.1.1.2 and I decided to migrate because of the IDE improvements such as Bugs Solutions, Maven support, code templates, etc).
The new version seemed to be non-compatible with WLS 10.3 because I couldn’t mount it in the same middleware so I installed the new one in C:\oracle\Middleware11g2, JDev 11.1.1.2 with WLS 10.3.1 (default in Installer).
EXAMPLE
I have created a new sample Project named JDev112App, it only has 1 java class, 1 ADF template and 1 JSPx to show the errors and differences between releases of the IDE… However, I also have added the screenshots of the Project in each IDE, also I have included a screenshot of my real project (Business App).
NOTE. Business APP project is under subversion SVN and the migration was done successfully when JDEv 11.1.1.2 opened it (it migrated automatically).
What should I do?? .. thanks
Best Regards,
Screenshot1
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15778
Screenshot2
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15779
Example APP
http://comunidadoraclehispana.ning.com/forum/attachment/download?id=2315969%3AUploadedFi38%3A15784

I think that the problem could be preferences/settings migration from Jdev 11.1.1.1.0 to JDev 11.1.1.2.0, because I migrated not only the application but also the JDev preferences ( "Documents&Settings...Jdeveloper..." ).
I have installed in a new machine without previous version of Jdev the new release JDev 11.1.1.2.0 and when I deploy my test application with errors ( showed in this post ), it works fine and also the design view is correct.
I am not SURE but I think the bug or problem could be also the preference/settings migration between JdeveloperS.
Can anybody tell me the real reason?? How can I fix it ... I don’t want to import each of my settings manually in JDev 11.1.1.2.0 ( I mean templates, javadocs settings, connections, repositories, etc).
Thanks in advance for your help,

Strange major problem with 975X PowerUp Intel MOBO

I’m suddenly having a strange major problem with a MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775 motherboard. Previously, it had given me no problems at all.
It went like this:
Powered on system in the morning, booting from a cold start.
Hit DEL key to get into the BIOS.
Missed the window and the system booted into Windows normally.
Re-started the system from within Windows.
Hit DEL key to get into the BIOS and was successful the second time.
Hit the ENTER key on the first item “Standard CMOS Features”.
The DATE, TIME and other information was displayed on the next screen, but at this point, the BIOS screen became completely unresponsive to any keyboard input.
The only thing I could do at that point was to power off.
Subsequent power on boot-ups resulted in the system always freezing at the BIOS splash screen after the video card sign-on.
I have switched power supplies, hard drives, keyboards and video cards. I have disconnected everything except the video card, keyboard and one RAM module. I have switched the four RAM modules around and then reduced the RAM to one 256MB module in the proper slot. I even changed the battery on the MOBO, in case it had shorted out and removed and re-seated the BIOS chip. It still halts at the BIOS splash screen.
The BIOS chip can’t be completely dead, because I powered off and pushed the BIOS reset button on the MOBO to reset the BIOS to the factory defaults. When I re-booted, I could tell that it had actually reset to the factory defaults because I had previously set the BIOS to reboot the system on resumption of power and the factory default was to remain off until the power button was pushed, which was now the default.
I’m stumped! All I can think of is to get a new pre-programmed BIOS chip and see if that makes any difference, but I’m not sure this system is even worth the expense with no guarantee of success. Any suggestions on how I might get past the BIOS splash screen or do I for sure have a corrupt BIOS chip?

System specs as per the posting guidelines -
Board: MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775
Bios: Version (can’t recall & can’t check since it won’t go past the BIOS splash screen)
VGA: ASUS EN7600GS nVidia GeForce 7600GS PCI-e 256MB DDR2 (also tried new XFX nVidia
Geforce 210 PCI-e 2.0 512MB DDR3)
PSU: Chiefmax 680W ATX (also tried new OCZ 700W ATX)
CPU: Intel 2.8GHz LGA-775 Core2 Duo Dual-Core Processor
MEM: 4 x Samsung 512MB 1Rx8 PC2-5300U (2GB total)
HDD: Seagate Barracuda 250GB SATA2 (also tried Seagate Barracuda 500GB SATA2)
COOLER: Intel OEM LGA 775 fan/heatsink C25897-001
OC: No
OS: Vista Home Premium 32-bit
I have been through the BIOS reset procedure several times and pretty much as outlined. As I said before, I could tell that it had taken a reset to the factory defaults, because the power on option had changed.

Strange refresh problem with two heavily used forums...

Hi,
For last two weeks, I have observed a strange problem with Database-General and SQL-PL/SQL forums, which are used heavily (comparatively more number of users than other forums).
If I navigate from Forum Home (http://forums.oracle.com/forums/index.jspa?categoryID=84) to Database-General (General Database Discussions or PL/SQL forum (PL/SQL these forum pages open within 2-3 seconds but they open.
But if I hit refresh (F5) from within these forums, 9 out of 10 times, I get a timeout or a page not found error.
I can navigate back one page, click on link to go to Forum home and from there to Database-General or PL/SQL forum and everything works fine.
I have tried clearing all caches, cookies and other settings on my Firefox (3.0.1) but it has not helped so far.
Is this a known issue?

Satish,
I have to use the back button when after writing a reply, I am welcomed by 500_internal Service error. If I would refresh there, I lose what ever I have written. So I go back and again submit.
For the refresh,at times ( and very often) , I find forums being slow like dead. Ironically with the reply button,thread(s) work but otherwise not. So I do a logout , refresh the page and if have to reply,click on reply. After that again, logout and refresh.
if things are fine than refresh works fine,sadly not quite often as it should be.
Cheers
Aman....
PS: Are you on Oraclecommunity.net?

I have a strange WPA problem with my airport card

To set the scene, I'm using a powerbook G4 with built in airport card. My home router is a Belkin Pre-N MIMO.
I have had a recurring problem with the router for a few months now, I don't quite know when it started, but it has gotten to the point where I must do something about it.
The security on the router is set to WPA PSK with a TKIP system. I understand that in order to preserve the integrity of the encryption, the WPA key is routinely changed. In normal circumstances, this transfer is instant, but for some reason on my powerbook, it results in the computer becoming disconnected from the Internet, although it thinks it is still connected. Even more strangely, only port 80 is affected by this, as ftp, POP3, online games and instant messengers work fine.
Disabling the security on the router seems to fix the issue, but leaves the network open to others. Other wireless computers, including a G4 MDD with a Belkin Wifi card, are not affected by this issue.
I thought it might be a problem with my powerbook's built in wireless card not dealing with the WPA key change process, but i'm not sure. I'd appreciate any insight.

This was solved by buying an Apple Airport Base Station.

Strange new problem with external effects and latency compensation

i'm currently facing a new , very strange problem with latency compensation for external effect devices. it alway worked fine for me but suddenly there are strange things going on. i'm suddenly running into problems when using sends which feed auxes going to external effect devices.
latency compensation is set to ALL !!!
easy setup :
- open an empty project and create 2 audioinstrument tracks. on the first one load the exs with a drumkit and record f.e. a bassdrum pattern. leave the 2. instrument empty.
- now on the first audio instrument create a send to bus 1 -> aux 1 and insert the i/o plug-in in the aux and route it to your external effect device. chose a temposynced delay.
- press play = everything is fine when audioinstrument 1 is highlighted in the arrange.
- press stop, click on the track with the 2. audioinstrument and press play = totaly weird timing problems. delay is only in sync when track 1 is highlighted.
- create a send in the 2. audioinstrument and route it to bus 1 -> aux 1 too = still the same problem
now insert ANY softwareinstrument in audioobject 2 and suddenly the timing for the delay is right.
go ahead and create a 3. audioinstrument track but leave it empty first. chose it in the arrange = again weird timing problems with the external delay.
insert any software instrument on audioinstrument 3 = still the same problem
now create the send to bus 1 -> aux 1 in audioinstrument 3 and guess what, timing is right.
*** is going on here ? can anyone reproduce that ?
it works fine when using sends which feed auxes with software effects inserted.
funny thing is, when i go to the environment and change aux object one to bus object 1 and insert the same i/o in it it works !!!
very very strange, please tell me i'm not crasy and this is a bug !!!
as said, latency compensation is set to all.
i'm using the mac pro 3.2 8-core running os 10.5.4, logic 8.0.2 and a motu pci-e audio system.
Message was edited by: Olaf Dieckmann

Welcome to the Discussions.
If you need it formatted FAT32, reformat it on your Mac. Use MS-DOS (FAT32) as the file system. If you don't need it for both PC and Mac, format it HFS+ and you'll be able to use the Retrospect Express software that came with it on your Mac.
John

Strange charging problem with ZEN Mi

I bought a 6gb Zen Micro for my girlfriend but have encountered a strange problem with charging it.
If i connect it to my computer (have tried on several) the player displays the charging icon but will not actually charge (no flashing and the battery is not filled). But if i install Windows Mediaplayer 0 it will start charging on the very same USB-port. This is verified on several computers with USB 2.0. I also have an AC-charger with USB connection and can't charge with this (same problem as on PC, displays charging but is not charged).
The player is using the latest firmware and Creative support recommended me to send it in. I have however not done this yet as this does not seem as a hardware problem to me but as a problem in the firmware. If the player was faulty, why would it charge when Windows Mediaplayer is installed?
Has anyone else encountered this problem or is the player faulty?

I can't charge mine either. I got it for Christmas and have loved it, although now it's been on charge for about 20 hours and it's only showing bar.
It flashes for a few minutes and then sto
ps.
Very very annoying.

Strange math-problem with LabVIEW 7.1

Hello!
I am using LabVIEW 7.1 and I came to this strange math-problem. Could it be that it is a problem of LabVIEW 7.1?
Ok try this with LabVIEW 7.1:
open a new VI
place a subtract-VI (pallet numerical) on the block diagram and try to subtract 0.2 from 1.6
place a less-VI (pallet compare) on the block diagram and wire a numerical constant 1.4 to input x
wire the result of the subtraction to input y of the comparison
place an LED to the output of the comparison
and start this.
What does it say?
The LED should turn on and this means here that 1.4 would be less than 1.4 .
But I would have expected that 1.4 is not less than 1.4 .
This works also if you add or subtract upto 0.2 to/from the values 1.4 and 1.6 (or equivalent with 0.2) .
If you change the inputs of the comparison then the result is as expected and 1.4 is reported not to be less than 1.4 .
If you compare two constants with the same value 1.4 you will not get the same strange result.
Does anybody have an explanation for this?
Espelkamper

Hello,
For floating point math: Rounding to multiples of 0.1 is problematic as
those numbers are infinite fractions in base2 representation...
So maybe you should change your numbers to integers using fixed point math. If all your input values are in the range of 1.4 to 1.8 you can multiply by 10000 and round to next integer. Then do your comparison on that integer (there's also an 'InRange' function in the comparison palette).
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Strange Boot problem with iMac OSX 10.7.5 (Boot loop, not working safe boot etc.)

Hey guys,
I've got a strange problem with my iMac Late 2009. This morning it didn't want to boot (grey screen with turning wheel). Yesterday when I shut it down everything was fine. Last backup was finished three minutes before. So I was a bit shirty but noch scared of any data loss.
I tried the following things:
1. boot recovery and check hdd (it's a new one, only second day back from apple store for replacing seagate hdd), everythings fine
2. try to boot in safe mode, did not work!
3. try to boot in verbose mode, did work until it stopped. Screenshot of the last lines of log is within this post
4. I used my TM backup and afterwards I could boot! Strange, because as I sad the backup finished a few minutes beforce I left my mac and shut it down
Now I'm a bit scared of shutting it down again But what would be the next step to find the error? My first thought were some third party kernel extensions, but that would not affect a safe mode boot, am I right? I have a Macbook Air here which is setup nearly identical to my mac and it's working. Could it be a hardware fault? Maybe you've got an idea.
Thanks!
Max

at the moment it seems to be a corrupted time machine backup from my old hard drive (new one has a runtime of 27 hours). So I'll will try a clean install of my system at least, when I got the time. sh%&$ !

Strange ODBC problem with 64 bit (x64) 10.2 client

Hi,
I'm encountering a strange problem with the 64 bit ODBC driver that comes with the 64 bit (x64) 10.2 client. I have installed the client and that all went fine, and I can use sqlplus to access my databases.
Now, I have setup an ODBC datasource using the Oracle ODBC driver that gets installed and if I click on the Test button and provide correct login information I get connected just fine.
So, now if I attempt to use this ODBC datasource from a 64 bit program that I am writing, I get the following error message :
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
I'm know my program is ok because I have tested it with other ODBC drivers and they work. I can't seem to determine what exactly I'm missing that is making this not work. I have set the environment variables TNS_ADMIN and ORACLE_HOME to point to the correct places - I think, but that doesn't help. Also, the Oracle \bin directory is in the path as I thnk it should be.
I'm stumped. Does anybody have any idea what could be the problem here ?
Thanks,
Nick

Hi,
I tried that and I couldn't get it to connect using the Oracle ODBC driver. It worked fine if I picked a SQL server ODBC datasource, but not an Oracle one. With the Oracle ODBC DSN, I don't even get an Oracle message, I get an ODBC configuration error.
I'm pretty sure that the Oracle ODBC driver is 64-bit since the ODBC admin program is a 64-bit program and it is able to do the test ok.
I'm think that the when using the ODBC driver, there is something in the environment or in the naming of the DSN that I am doing wrong

Wolfenstein crashes with GeForce4 ti4200

After weeks of research and testing and hours of searching forums for answers, I have come to the conclusion that this problem must be hardware orientated. I believe it is my GeForce card but am not 100% sure. The problem I am having refers strictly to Return to castle wolfenstein however after long discussions with activision support it seems evident that this is a problem with the hardware. I am posting here as a last resort, I love my card and don't want to have to turn to ATI. Plus $300 is something I do not have at the moment.
To get to the point, I have been having lockups/crashes in RTCW and only in this game and only in the multiplayer portion. I can play other games for hours on end without a single problem yet after about 30 minutes playing wolf MP my system locks up. I have tested this in both windows and linux. In windows I get an error once in a while stating Quote
Microsoft Visual C++ runtime Library
Program C:\Program Files\Return to Castle Wolfenstein\WolfMP.exe
Abnormal program termination
This seems to happen even faster when I am in a punkbuster enabled server. I have spoken to the punkbuster programmers with no conclusion to my problem. Also I have wiped my system clean an reinstalled wolf multiple times. Tried other drivers, both nvidia and MSI all sorts of versions. Nothing seems to help and I play wolf religously.
This started about a month ago and never have I had a problem before that. I still have not had this card a year yet and am quite upset. When my computer locks up the sounds freeze but the funny part is that some how the programs in the background are still running, of course I cannot see this because the screen freezes where it was, but my cpu light on the fron of the comp responds to me smashing the keyboard and I can shut down the comp sometimes.
No one I have spoken to has ever heard of a problem like this and if they have the "fix" for it never works. I figure if it were a software problem it would have been solved by my formatting the computer or switching to linux. This is why I am posting here. I will provide the software and hadware specs for anyone who wants to help me figure this one out. It is pretty complex so it will be a challenge for even the most proficient computer user.
Quote
Hardware:
Motherboard: SN-KM133a
CPU: AthlonXP 1600+
SoundCard: SoundBlaster Live!
Ram: 384mb PC133
HDD: 2 40Gb 7200 RPM WD drives
Ethernet: LinkSys 10/100 card (don't remember model number)
Software:
OS: Windows XP sp1 || Mandrake Linux 9.1
Drivers: MSI detonator 43.49 || Nvidia 1.0-4349 Linux IA32
If anyone wants to attempt to rescue me from my quickly emerging insanity please do so...If I can't figure this out soon I will be making an appointment with a good psychiatrist. LOL just kidding. I just want to thank anyone that wants to lend a hand or an extra video card (hehe) in advance.

Go back to the 41.09 Detonators and see what happens...
Heard alot of ppl are having a problem with the recent releases 43.45 and above...
Also did you download DX 9.0?
Can you list your system specs with specific manufacturer details such as what I have in my signature below...
Give PSU voltages and amps for 3 main voltages +5v, +3.3v and +12v...
Think back to the time when this all started...what programs did you install around that time...I bet it's a driver or program that is conflicting with Wolf...
Look thru Add/Remove programs and dump some of the stuff in there like Morpheus/KaZaA or anything such as that that may contain spyware or underlying programs...
Look in msconfig and see what is running in the background when you boot up...start/run/msconfig, click the startup tab and look up anything that you see listed as running using Google search...you'll get explanations of what each of the programs are that you see there...
It has to be something that you loaded or changed in the system otherwise it's a hardware problem and it doesn't sound to me that it's hardware related at all...
Then again PSU's and memory cause funny stuff to happen like this and right out of the blue...
Cheers!! 8)

Strange ide problem with 845 ultra

i have got a really strange problem with my 845 ultra board
I have a 2.0 GHz cpu in it, 2x 256MB Nanya CAS2 ddr, , gf4ti and a Realtek nic, onboard audio
ide ports:
primary master: IBM 80GB hdd
primary slave : Lite-On dvd
secundary master: Lite-On 40x cd-rw
Whenever I burn a cd, the whole system hangs while writing the lead-in and lead-out, after that is complete,everything works fine again
Also, when i add files to my Winamp playlist, I always get a general protection fault in Winamp.exe...
And, yes I did check my ram with Memtest86, it is fine
Even a fresh install of either windows 2000 sp3 or windows xp doesn't have any effect, even with all WHQL certified drivers installed
The strange thing is: If I connect all ide devices on a Promise Ultra100 TX2, all problems disappear.
So, is my onboard ide controller dying?
btw, all ide devices work fine in my brothers k7t266 pro2..
edit: fixed it
Never knew that the Intel ide drivers needed to be installed.
I have never needed any ide drivers for any board,so this surprises me.

Quote
Originally posted by wonkanoby
power supply details,make model,combined amps 3.3 and 5 v
Enermax 431W EG465PVE
combined amps
min - 185W
max - 220W

Problem with Geforce4 Ti4600 AGP4X

well I tried searching the forums but I couldn't find a thread that pertained to my problem :/, so: I have the MSI Geforce4-Ti4600 AGP4X card, but when I use it I see lines running down my monitor. The picture is still there (sometimes), but there are vivid lines of color that run vertically on the screen maybe a centimeter wide. So right now I'm using my GF2 ULTRA, but I was thinking that if I couldn't get any help on here I'd go ahead and return the card on warranty...and by the way could someone explain to me how that works? Thanks for any help.
-Josh

First, make shure you have a good and strong power supply. GeForce 4 tends to draw a lot of power. Adding two 1 GHz CPUs, although Intel P-III, doesn't make the burden easier... I wouldn't go for anything less than 300 W, and preferably 340 W or even more. Also be aware that not all so called 300 W PSU's are equally strong. Chieftec makes good PSU's, I would probably recomend their 340 W for this system, unless you have many hard disks or CD's, in which case I would choose an even more powerful PSU.
If possible, you should also test the graphics card in another computer, just make shure the PSU is strong enough for the GF4.
Best regards
Quote
Originally posted by aeigis
hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

Resolution problem with GF4 Ti4200-TD 128MB DDR

I am having problems when I switch my display resolution to 640x480x32.
It also affects any application which runs in the affected resolution.
I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
My system consists of:
AOpen AX34 Pro Motherboard
AGP 2X / 4X
Intel Pentium III 800MHz
512MB RAM
Direct X 8.1
Windows Me
Looking forward to you reply. Thank you for your help.

izel,
Get the latest Via 4in1 Drivers and try running the Card in AGP 2X. Do not expect much from the Via Apollo Pro 133 Chipset. Lots of problems with the GART.
Take Care,
Richard

Minor problem with geforce ti4200 128 mb

Ok... The problem I get with this card is that, you know when you go to
display properties > advanced > Geforce > overlay controls
you get to change the brightness and stuff, when I do, it doesnt work. Now I tried this with my TNT2 card and it works fine so I don't think its any hardware issue... Anyways, help is appreciated thanks!
BTW, I am running in windows XP and have the latest detonator drivers and graphics drivers.

Hi,
I have the same card and have used it with no problems whatsoever on an Asus A7N8X-Deluxe and an MSI K7N420, MSI K7N2G-ILSR and my current ABIT board without any problems with 3DTurDo or in any games. I have seen the "nv4disp.dll" before on other systems sporadically but it was usually cured by a proper removal of the current nVidia drivers and installation of the latest drivers, however, I have not used the latest nVidia drivers for that card. I have stuck with later versions from 41.09 - 45.XX only. It is most likely a combination of drivers, improper configuration, driver istallation and removal, or possibly the game itself could be buggy. That's a tough one to pin down.
Give my post at the top of the VGA forum a read "Alternative to MSI drivers with overclock settings too!"
Do yourself a favor and stay away from MSI's drivers, I have seen more problems with them as they make changes to install and uninstall routines that are questionable, not to mention they test them in such a way I also might find questionable as well. nVidia's site has an archive of past drivers and so does Driver Heaven.
If you decide to reformat again, I recommend installing service packs, then chipset drivers, then VGA drivers.
Good luck

Strange visual problem with Geforce4 ti4200

Similar Messages

Maybe you are looking for