Strange Vocal Double During Recording Logic 8!

Hi everyone (My first post ,
I am getting a strange doubling effect if i record a vocal on a record enabled track in logic. This only happens during recording in playback it plays as normal although it is quite off putting. I am using a TC Electronic Konnekt 24D Interface and this only occurs when recording a vocal with a condensor mic it does not happen when i record my turntables or any other stereo source?
Any help would be much appreciated
Thanks

This is due to the fact that you're monitoring through Logic and you're hearing the direct Input as well as the track output causing the doubler effect as the Latency is delaying the track's Output. So set the track you're recording to to "No Output", enable Input monitoring and you should be fine.

Similar Messages

Display not scrolling during recording

I'm using the latest version of Audition CC2014, and have just noticed that during recording, the waveform created under the playhead (in the waveform editor) as the playhead moves left to right doesn't scroll. I have playback preferences set to auto scroll during playback and recording, with centered auto-scrolling in the waveform editor.
As the playhead reaches the right hand side of the display, the whole time line is compressed (like an auto zoom out) creating more space to the right of the playhead, which then jumps left to the beginning of that newly visible unrecorded space and starts moving right again. The waveform never scrolls off the left hand side.
Everything works fine when I'm playing an audio track back, it's only the recording that's affected. Nothing has changed on my PC apart from updating the Creative Cloud Apps I use.
Has anyone else noticed this behaviour?
Steve

Hi,
there's probably nothing wrong. During recording, Logic will give the graphics low priority, in order to "concentrate" on maximum audio performance. So, the graphics of a new audio track will be somewhat messy during recording.
Kind regards,
Jaap

Getting rid of dry vocals during recording

I just bought the Antares autotune evo and have been playing around recoding with it. The problem I'm having is that during recording I am hearing the dry vocal track along with the effect, it's very distracting not hearing just the effect on the vocals. Does anyone know how I can set the track to only hear the effect without the dry vocals?

Sorry, I should have been more specific about my gear in the post. I am using an m audio projectmix i/o for my audio interface. I didn't think of checking the settings for my interface, I will take a look at that. Are there any settings in logic that might enable input monitoring? If so I'd like to make sure I do not have that enabled.
Thanks for the quick reply, it is appreciated.

Issue with vocals during recording - only hear them on left side of headphones.

wanting to hear in stereo...

If you've recorded your vocals the way most people do, then they will be mono anyway! If you want to hear a single mono track in both channels (assuming that your headphones are working normally in the first place), then you either have to pan the mono track so that it feeds into both sides of the master channel, or you have to duplicate the vocal so that it occupies both sides of a stereo track. The former is the preferred way of doing it - have a mono vocal track in your stereo mix and pan it to where you want it in the stereo field.
As far as monitoring during recording is concerned, then there could potentially be a few other issues - it rather depends how you are feeding the channel out of your sound device. It's not quite so easy if it's a mono track to feed both sides of a pair of headphones when you haven't gone via the master mixer - IOW you are using a direct output from the track. That would only feed one channel by default. But if you are going via the mixer (which you normally would whilst laying tracks) then it should just be a matter of panning the vocal channel into the centre.

MIDI notes sent during record ready mode AND whenever I start Logic Pro and

Why is Logic Studio pro sending a MIDI note whenever I am writing a new AUDIO track? I get a steady pulse during record ready mode AND this also happens each time I open a project up. ( although it only sends ONE midi note (NOT repeating) when I open up a project)
I have eliminated it by simply turning off the midi interface but this is hardly a fix.
thanks for any help!
Bob

Is it doing this for all projects? Did you change anything in the Environment window? All MIDI gets routed through there. You could attach a monitor object to your MIDI tracks in the Environment to try to see what's going on...although first I would make sure no other programs on your computer could be interfering.

Logic freezing/unresponsive during recording?

This may sound dumb to experienced Mac usere, but sometimes we forget, and if memory is lost after a shutdown/powerup, the power & display settings return to factory defaults...
Check power & display System Preferences before recording:
Your PC or monitor may attempt to "Sleep" during recording - Set both to never sleep. Also, When the monitor goes off, then comes back on during recording, the PC will also have to redraw all the track info - While it is still recording...

It happened to me...

Very very strange backflush problem during CO11N?????

Hi Experts,
I find a strange backflush problem during production order confirmation by CO11N,described as follows:
When I create a production order for material A ,total order quantity is 2,means to produce 2 material A. For produce 2 material A, we need 10 material B.That means in the component view of this produciton order ,there is item material B, and the requirement quantity is 10.
After release the production order,when doing order confirmation by CO11N,I enter 1 for material A in the "Yield to Be Confirmed" ,that means to confirm 1 material A and having done a partial confirmation (Beacause the production order quantity for A is 2) .Because 2 material A need 10 material B,so the system will post goods movement for 5 material B.
After that ,confirm 1 material A, I change the production order,change the requirement quantity of material B from 10 to 5,and the quantity withdrawn of B is aslo 5 because backflush of confirmation 1 material A.
And after changing the production order ,when again doing order confirmation by CO11N,I aslo enter 1 for material A in the "Yield to Be Confirmed" ,that means to confirm 1(the last material A to be produced) material A.But because I have already change the BOM of produciton order,2 material A only need 5 material B now,and the quantity withdrawn of B is 5 now.So I think the system should not backflush material B      by this order confirmation.
But the system aslo backflush material B by this order confirmation,and the backflush quantity is 3 ,not 5,that means system automatic post 3 material B goods movement.
Very strange, I don't undrestand why?
I don't konw why system still automatic post goods movement backflush although I have changed the requirement quantity of one material and the Quantity withdrawn is equal to the requirement quantity?
What is the automatic goods movement logic by production order confiramtion ,especially the backflush quantity logic?
I aslo want to konw how I can set the backflush component quantity when doing order confirmation by CO11N in customzing through IMG？
Where can I customzing backflush quantity in IMG?
Edited by: Fei Liu on Apr 1, 2009 12:11 PM

duffymo's right (but a little terse in explaining).
Your "urgent problem" is that your SQL query is unorderd. However duffymo is also pointing out that a little additionaly work can make your code be more standard and work better/faster.
Instead of doing what you're doing (bouncing to the end of the result set end, getting the number of messages, then walking through the result set backwards), retrieve the data in the order you want to display, using an "ORDER BY x" or "ORDER BY x DESC" clause. Use rs.next() to walk through the records and count them as you do so.
no_of_mail = 0;
while (rs.next())
   no_of_mail = no_of_mail + 1;
    // process here.
}Many drivers and DBs are designed to be much much more efficient when ResultSets are accessed "in order"; since that's the normal case, that's what is optimized the most.

Audio drops during recording

Hi guys,
I'm working on my MacBook Pro 2.4 with Logic Pro 8.0.2 and M-Audio Ozonic FireWire interface (latest driver installed). During recording (just one voice track) over an empty session I notice random audio drops. I tryed to change latency and buffer without success. Same equipment and software on my Mac Pro 2.66 works great.
Last year I worked all the summer with the same MacBook Pro (maybe some osx and software versions earlier) without any problem.
Any good ideas ?
Thanks in advance.
Piero

Turn Airport off first and close all other applications.
Recording one track onto the system drive should not be a problem at all but nevertheless try recording all your Audio onto a fast external FW drive in the future.

Converting cassette to cd using garageband. Voice on cassette sounds like chipmunk. Is there a way to fix the speed during recording on garageband, so the voice sounds normal?

Librarian Asst. needs your help! Trying to preserve WWII veteran's interviews presently on cassette. However, on one cassette the voices sound like chipmunks (speed too fast during recording). I know how to transfer the cassette recording onto garageband. I just don't know how to transfer the recording at a slower speed, so that the voices will sound normal. Is there a way? Please help. Thanks.

You could try two things (sorry, I can only point you to the current settings in GB'11, since I no longer have GB '09) but it should be very similar.
The easiest thing would be, if the vocal transformers do work. You can change the pitch of a voice using a "Vocal Transformer" effect. Click the "Edit" tab in the "Info" panel and click an empty brick to add a filter:
If that does not work, try to change the timing of the track. Enable "Follow Tempo&Pitch". If GB '09 does not have "follow tempo & pitch", record your tape directly into a Real Instrument track in GB to record a purple region.
Use the tempo slider in the LED display to lower the tempo, till the recording does sound more natural.
Good Luck,
Léonie

Input monitoring problem during recording

Greetings,
I recently purchased Logic Pro 9, and am having a problem with input monitoring. I am not able to in any way affect control over my monitor mix during recording. I have tried every combination of options, including software monitoring, auto-input monitoring, etc...but always get the same headphone levels from my inputs (I am actually trying to mute the input signals out completely so that I can play along to only the click.
I am wondering whether this is some sort of software glitch, because I was able to control the mix perfectly before the latest software update. I wonder if that is the problem, or if I am overlooking some minor detail. Please help!!
BTW, I have checked, and this is definitely a software, not a hardware issue...
Thanks much,
Kevin

I have a similar problem, although I'm on Logic Pro 8.
I can't seem to record my guitar track (mic'd cabinet) without having the result monitor back through my studio monitors unless I turn off software monitoring in Preferences/Audio. But then if I want to record keyboards direct and listen to what I'm playing, I have to go back in and turn the option back on.
In Sonar on the PC, this was much more intuitive. You could arm a track for recording by clicking the "R" button, and separately toggle monitoring on and off by clicking the little speaker button to the right. You didn't have to constantly fiddle with the program preferences.
I have a FireWire410 interface, and the monitoring only happens when Logic is loaded. I would have thought that the little "I" icon was to turn monitoring on and off, but it's some "pre/post-tape" toggle I can't find a use for.
Kevin, how did you control your monitor mix before?

Signal Volume during Recording

When I record the volume of each input signal being recorded is fixed. Adjusting the fader has no effect. Automation is turned off. Is there a way to adjust this in the mixer? I'd like to be able to optimize the input gain on the interface (Presonus Firestation) without having to turn it down or up in order to hear it correctly in the mix.

Rob Twardock wrote:
Sorry, but no. You're suggesting turning the faders down in Logic and I'm saying that's what is not working. I move the fader down for the channel being recorded and it has no effect on the volume I hear through the 1/2 output during recording. Once its recorded, the fader works fine for playback.
Sorry, I got confused with your post.
Then maybe check the "Software monitoring" to ensure it is on.
This will force the fader moves to change the levels on your mix during recording.
It will introduce some latency, so check your settings.
Cheers

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Suggestions?

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Any Suggestions?

Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
Adjust the Settings in the Inspector to your liking…

Idvd crashed during recording dvd

I did a new project with 2 film made with imovie09 and extracted to quicktime one in full hd and one in 4:3.
Idvd goes well untill the moment of recording, when it is in the phase before burning the dvd.
He remains some minutes in analysing resource, and then crashed.
Do anyone help me why this happens, i did a lot of projet with idvd and never happened it...
thank you.

Update:
- The Application File Juicer was able to extract the movie as JPEG-pictures.
http://echoone.com/filejuicer/
- This is a site where they can help you with damaged movies. I don't know if it's better than File Juicer, they are looking at the file at this moment. They answered my inquiry very rapidly though, and seems to be very professional!
http://www.aeroquartet.com/
I hope this is worth something for someone, this was not a funny trip... :P
(how in heavens name can an iMac crash during recording??)
Fwiw,
/andreas

ERROR   OGG-01028 Incompatible record (logical EOF)

Hi experts,
i am getting below error in replicat side
2015-03-13 05:19:08 ERROR   OGG-01028 Incompatible record (logical EOF) in /opt/app/database/ggs/11.2/dirdat/pp1enb6d6/pdrmain/cs034783, rba 153386999
info replicat
REPLICAT   replicate   Last Started 2015-03-13 05:18   Status ABENDED
Checkpoint Lag       37:02:43 (updated 00:28:01 ago)
Log Read Checkpoint File /opt/app/p2enb3d6/ggs/11.2/dirdat/database/drmain/cs034767
                     2015-03-11 15:53:51.572589 RBA 179098561
current trail file is 034767 and corrupted trail file is 034783. i think the transaction is runnin from 034767 onwards.. please confirm if we can skip the transaction as oracle note suggest and move to next good record after rba of 153386999 of trail 034783

Hi,
>>current trail file is 034767 and corrupted trail file is 034783. i think the transaction is running from 034767 onwards.
Yes you can find out the end of transaction by using logdump.
>> please confirm if we can skip the transaction as oracle note suggest and move to next good record after rba of 153386999 of trail 034783
Do you know about that transaction? why do you want to skip it, do you know after skipping target table(s) will not be out of sync with primary.
I would advise reading this note and see if you can recover that.
Master Note for Oracle GoldenGate(OGG) Error OGG-01028 (Doc ID 1502276.1)
HTH,
Pradeep

How can I save the modulation I apply to an instrument during recording such that it remains during playback?

How can I save the modulation I apply to an instrument during recording such that it remains during playback? For example, I apply modulation #8 during recording, but when I play the track back the modulation is not incorporated.

Hi Vlad,
Unfortunately, I don't think there is a way to programmatically read the voltage output to the drive, as the voltage is all determined internally by the controller circuitry on the board. Depending on the controller though, you may be able to physically route the output terminal to a spare analog input channel and read in the voltage that way. This example Analog Input with 73xx Motion Card shows you how to program LabVIEW to do this.

Strange Vocal Double During Recording Logic 8!

Similar Messages

Maybe you are looking for