Strange waveform update problem:Urgent!!

I got a very strange problem with my waveform chart display, it can only display 2 plots on one waveform chart. I need to display 4 plots on one waveform chart at the same time, please give me some good ideas how to do this. The waveform chart reference is used. My program has been attached, please run it to see the problem, only zeros are displayed, if you only connect two data, the display is correct (you need to change subvi). LabVIEW8.5 is required.
Attachments:
Main.vi ‏16 KB
Subvi.vi ‏17 KB

Find the VIs
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
SubviV1.vi ‏17 KB
Main.vi ‏29 KB

Similar Messages

  • A Very Strange Post Update Problem

    Hi guys, new to the forum here, wondering if I could get some help with a most disturbing problem...
    Off the bat, I use a ppc Mac G5 running 10.4.11. I use this for Music production, and general music listening in my studio. For Audio I use pro tools HD 7.3 (as well as logic 8), with a digidesign 192 IO interface, and run most ofmy audio thru that. Now that we have that out the way... I normally dont agree to updates, as I would not like to upset a balance thats been working perfectly for me for some time, but 2 days ago, one of my assistants was using the computer and agreed to the latest update for Itunes, quicktime, and logic (but not the security update). Immedietly after the update finished (during which he said the quicktime update crashed), the system started going haywire, pro tools was shutting down, itunes wouldn't open, the like... Well after uninstalling and reinstalling itunes and quicktime, all order was restored, except for one AWFUL problem.. the sound coming out of any program BESIDES pro tools (itunes, logic, toast) is very strange, as if its coming thru very cheap speakers. I've run itunes through both the digi interface and the standard sound card (it has the same problem), and checked the EQ settings (flat), my sample and bit rates are straight... I have no idea! if anyone could offer some insight, It would be much appreciated! Thanks!!

    HI and Welcome to Apple Discussions...
    It's possible there's an underlying problem with your hard drive.
    Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    Also, make sure you have sufficient drive space. Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
    If the drive appears to be ok and you have enough available disk space, you could try the 10.4.11 combo update available here. http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    Make sure and run Disk Utility and repair disk permissions BEFORE and AFTER the installation.
    Quit any open applications/programs. Launch Disk Utility. Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
    Carolyn

  • Strange JTable update problems

    I am having some strange issues with a JTable.
    I have a custom AbstractTableModel that displays various properties of a list of Objects. I am using a java.util.Vector to store this list.
    The user is given several JComboBox objects which contain filters for my table, when any of these filters are changed, a class that manages my Database is asked to return a Vector full of objects that match these filters.
    I then set my table data Vector equal to this returned list and invoke fireTableStructureChanged() from my table model. This part works fine, the strange thing is, if the user has a table element selected and then they change the filters, the table will not update, it actually goes blank, but oddly enough the scroll bar on the scroll pane stays the same length as the old table.
    When I invoke the exact same update method again (which just sets the Vector containing my data to a new value, and fires the event) the table will update this time.
    I have tried calling MyJTable.getSelectionModel().clearSelection() in the hope that it will fix my problem, but it does not seem to do anything.
    So is my problem some strange event or threading glitch, or an issue with JScrollPane mabye?
    Thanks in advance for any help

    Try using the DefaultTableModel to see if you have the same problem. If not then you know the problem is with your custom TableModel.
    If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
    see http://homepage1.nifty.com/algafield/sscce.html,
    that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
    Don't forget to use the "Code Formatting Tags",
    see http://forum.java.sun.com/help.jspa?sec=formatting,
    so the posted code retains its original formatting.

  • J2EE StartUp Problem, URGENT.

    Hi all!
    I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
    [Thr 2968] Tue Aug 09 13:59:50 2005
    [Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
    JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
    -> arg[02] = -DSAPINFO=J2E_00_sdm
    -> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
    -> arg[04] = -nodeName=sdm
    -> arg[05] = -nodeId=2
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
    -> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
    -> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
    -> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
    -> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    [Thr 2968] Tue Aug 09 13:59:51 2005
    [Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
    [Thr 1188] Tue Aug 09 14:01:01 2005
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] Tue Aug 09 14:01:58 2005
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 1188] Tue Aug 09 14:10:25 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:15:45 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:20:46 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:26:06 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:31:07 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:36:27 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:41:28 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
    Thr 1188] Tue Aug 09 14:42:25 2005
    [Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
    [Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
    [Thr 1188] Tue Aug 09 14:42:27 2005
    [Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
    [Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 1188] Tue Aug 09 14:42:32 2005
    [Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 1188] Tue Aug 09 14:42:38 2005
    [Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 1188] Tue Aug 09 14:42:44 2005
    [Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 1188] Tue Aug 09 14:42:49 2005
    [Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
    [Thr 1188] Tue Aug 09 14:48:11 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:53:12 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 1188] Tue Aug 09 14:58:32 2005
    [Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
    Looking the log and trace files i see the following errors:
    - SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
    - java.net.SocketException: socket closed
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
         at java.net.ServerSocket.implAccept(ServerSocket.java:448)
         at java.net.ServerSocket.accept(ServerSocket.java:419)
         at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
    - erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
    I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
    Thx and Rgds.
    Gregory

    Hi, thx a lot both.
    Respect the link
    http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
    In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
    - available.txt that contains the following data:
        Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
        Available   08.08.2005 10:59:54 - 08.08.2005 13:52:54
        Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
        Available   08.08.2005 13:54:54 - 08.08.2005 14:03:54
        Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
        Available   08.08.2005 14:05:54 - 08.08.2005 14:34:54
        Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
        Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
        Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
        Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
        Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
        Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
        Available   09.08.2005 12:47:25 - 09.08.2005 13:26:25
        Available   09.08.2005 13:43:56 - 09.08.2005 13:55:56
        Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
        Available   09.08.2005 14:05:57 - 09.08.2005 16:16:57
        Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
        Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
        Available   10.08.2005 08:36:39 - 10.08.2005 09:16:39
        Available   10.08.2005 12:33:51 - 10.08.2005 14:01:51
    - dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
    - dev_dispatcher that contains the following info:
        [Thr 2664] Wed Aug 10 08:33:04 2005
        [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
        [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
        [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
        [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
        [Thr 3320] Wed Aug 10 08:33:21 2005
        [Thr 3320] JLaunchISetP4Port: set p4 port 50004
        [Thr 3528] Wed Aug 10 08:33:26 2005
        [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
        [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
        [Thr 3584] Wed Aug 10 08:33:55 2005
        [Thr 3584] JLaunchISetHttpPort: set http port 50000
        [Thr 2664] Wed Aug 10 08:34:02 2005
        [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
        [Thr 2568] Wed Aug 10 08:34:08 2005
        [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
        [Thr 3660] Wed Aug 10 08:35:07 2005
        [Thr 3660] JLaunchISetP4Port: set p4 port 50004
        [Thr 3600] Wed Aug 10 08:36:34 2005
        [Thr 3600] JLaunchISetHttpPort: set http port 50000
        [Thr 3612] Wed Aug 10 12:43:40 2005
        [Thr 3612] JLaunchISetHttpPort: set http port 50000
        [Thr 3612] JLaunchISetP4Port: set p4 port 50004
        [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
    - dev_server0 that contains:
        [Thr 2676] Wed Aug 10 08:33:06 2005
        [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
        [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
        [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
        [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
        [Thr 4296] Wed Aug 10 08:34:58 2005
        [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
        [Thr 4296] Wed Aug 10 08:35:00 2005
        [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
        [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
        [Thr 4296] Wed Aug 10 08:35:01 2005
        [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
        [Thr 2676] Wed Aug 10 08:35:07 2005
        [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
        [Thr 208] Wed Aug 10 08:36:34 2005
        [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
    Thx and Rgds.
    Gregory.

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • 10.5.7 update problems

    After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

    jjtopspin wrote:
    Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
    I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
    I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
    I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

  • Cache update problem in Integration Directory

    Hi all,
    We have a cache update problem in our PI development server.
    If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
    We have tried:
    1. Clearing the SLD Data Cache.
    2. Did SXI_CACHE complete refresh.
    3. Did CPA cache refresh.
    4. Did a complete cache refresh of the server.
    5. Restarted the server.
    But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
    Thank you very much.
    regards,
    Jack Nuson

    HI Jack ,
    first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
    Perform a full cache refresh using the URL
    http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
    Regards,
    Saurabh

  • Twitter Update Problem

    Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous.  The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

    my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
    I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

  • HT4623 Update problem

    Hello
    How do i solve problem when i'am doing my update from 5.1 to 6.1.2 the massage (3194) occured. Please help me to solve this update problem.
    I'am using iphone 4

    See this support document http://support.apple.com/kb/ts4451

  • DATE FIELD PROBLEMS - URGENT

    I´m having trouble with FormsCentral.
    My form is running about 8 months with no problems.
    Yesterday people started to complain that the system doesn´t accept any date.
    That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
    I need Help Urgent!!!
    I depend on these forms to finish the payrol service from here.
    Thanks
    I´ll be waiting.
    Maurício Galletti
    Message was edited by: SNOWMAUSS
    It look like the system accepts just dates starting from the date of today.
    I´m testing.
    Please help.
    Thanks
    Message was edited by: SNOWMAUSS
    It looks like the system have some problem just with the date 20/10/2013?!
    I´ve fixed the problem change the interval from 20/10/2013 to another date  and used  21/10/2013 to another date and it works!
    But I think something is wrong with the 20/10/2013 date?!
    To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
    I´ll keep waiting
    Message was edited by: SNOWMAUSS

    Hi
    I´ve concluded that the problem persist if the date interval starts at the
    specific date "20/10/2013". Don´t know why?!
    Look at the screen capture above, you aks for
    Thanks a lot
    image: Imagem inline 1
    Maurício P. Galletti
    Contador
    [email protected]
    ( 55 11 3331-5567
    www.cadt.com.br
    2013/10/29 Genevieve Laroche <[email protected]>
       Re: DATE FIELD PROBLEMS - URGENT  created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
    FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

  • TS3694 im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to r

    im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?

    Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

  • Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Jelly Bean Update Problems on Xperia S Tablet

    I think we need a new topic for Jelly Bean update problems and fixes.
    Solved!
    Go to Solution.

    small fonts and icons blurry pixelated in notification or google agenda widget
    browser crashes a lot.
    Missing jelly bean home launcher
    Wifi disconnecting for no reason.
    Animations aren't smooth tough tablet is more responsive then android 4.0.3 release6b

Maybe you are looking for

  • Windows 2007 Update error 8000FFFF

    My new Windows 2007 Dell laptop does not install any updates due to error 8000FFFF. I tried windows Fixit but that doesn't solve it. Can you help me?

  • How to export to excel and format and send email?

    Hi all, I have an sql query that i need to run daily. My question is: how can i create a procedure to export the query result to an excel file with font Arial size 9 with all columns streched for best fit and also sent-it via email with subject and e

  • How to make a pdf bookmark in Preview?

    I have merged a couple of PDF files and I want to set the bookmarks to be able to locate the begging of each one more easily. How can I do this?

  • Backspace not working correctly

    While I'm in grid view I use Backspace to remove a series of selected photos from LR. I am given the option to Delete or Remove. When I choose Delete, the image is still left behind in the folder but is removed from LR, acting essentialy the same as

  • HT201205 How can I keep my phone paired with my car after I leave car?  My 4 had no problem

    I just replaced my iPhone 4 with a 5s.  It pairs with my car and when I leave my car, it uu-pairs.  My 4 did not have this problem. I don't want to have to pair my phone everytime I get in the car.