Strange XMLP implementation on HRMS Compensation Workbench

We are looking to create reports off the Compensation Workbench (CWB). As it follows from the viewlet found in the Metalink Note 311702.1, XMLP is implemented for the CWB in some pretty strange fashion not described anywhere in the XMLP documentation.
User is shown to create an rtf template. The tags' names, however, are not related to any XML file, but can be picked as the user likes. Upon uploading the template, the user is presented a screen on which he has to match his tags with the available data fields. Something resembling the process with PDF templates, but it is not.
The underlying XML file is created somehow behind the screen, and only for a single employee, so we can not create any reports, say, with the list of employees. So the questions:
What is this XMLP impementation?
Where is that XML file to which the tags are referred?
How can we change the file?
If not, is there other ways to run reports from the CWB?
Thanks a lot.

In step -1 Ensure you have the following infrastructure pre-reqs installed and you are a FULL Legislative HRMS customer
·         Oracle HR (PER) product installation status: Full
·         Release 12.1.3 or later
What it is mean ?
License E-Business Suite:Add-ons page i am seeing
Self-service Human Resources
Advanced Benefits
Compensation Workbench
iRecruitment
Payroll
Performance Management
Time & Labor
HR Intelligence
Succession Planning
Already selected.  Do i need to change any thing here ?
If these modules are selected, then you are good. Nothing else needs to be done (assuming you are licensed to use all of these modules).
And i want to install legislation for Singapore. Which patch i have to apply the pre requisites before applying the hrglobal.drv.
Depends on what your current HR patch level is - run the script in MOS Doc 453632.1 to determine this. Choose the column for your patch level in the table and check the key beneath the table for any patches you may need to apply.
And also i am using external tier for (iReqruitment). So do I need to apply this HRMS Legislative Data Patch and prerequisites in both tiers ?
Asif has answered this above
HTH
Srini

Similar Messages

  • How to add more summary data in the MIP of Compensation workbench

    Hi all,
    In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
    Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
    How to implement it?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • HRMS Configuration Workbench - yes or no?

    Does anyone have knowledge of HRMS Configuration Workbench being used for an Oracle HRMS and Payroll implementation?
    If so, what are the pros and cons?
    And would you recommend it as the preferred method for implementation?
    I am about to begin an implementation in the Gulf region, but have never used Workbench before.
    Thanks in advance.

    Check the following notes, they should be helpful:
    Note: 259771.1 - Known Issues with the HRMS Configuration Workbench
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=259771.1
    Note: 368586.1 - Is There A White Paper Available Explaining Configuration Workbench?
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=368586.1
    Note: 404157.1 - How Does One Troubleshoot HRMS Configuration Workbench?
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404157.1

  • CWB Issue - Compensation Workbench

    Issue in brief:
    We are able to do the compensation allocations once in the period....But how to do MULTIPLE compensation allocations in the same period (after the 'post compenstion process is run..)
    Eg.
    Availability period- 01-OCT-2008- 30-SEP-2009
    Manager has assigned done the compensation review for 5 employees out of his 7 employees on 01-oct-2008. Now the 'Post Compensation Process' is run on 02-oct-2008. The changes are posted to the 5 employee records.
    Now in middle of the availability period, say on 01-mar-2009, manager requires to give compensation awards to the remaining 2 employees.
    Issue 1:
    After running the 'Participation Process: Compensation Workbench' as Effective date of 01-mar-2009, the manager cannot make any updates to the 2 employees who were left out on 01-oct-2008. The manager has Full Access!Still he cannot make any assignment changes or the salary increase
    Issue 2: Manager also thinks of giving compensation award to 3 employees on say on 01-JUN-2009 out of those 5 employees who were already given compensation award on 01-oct-2008. So how this functionality could be achieved.
    Here we CANNOT use the multiple availability period because the BUDGET is allocated for the entire period from 01-oct-2008 to 30-sep-2009.
    Please let me know if I need to clarify the issue.
    Appreciate your help..

    Are all these updates happening to Salary ? In a typical implementation, post process is run after all the salary updates are done and no further updates are required. Your case seems to be a little different in this aspect. Please post a little more detail on the requirement.
    Answer:
    There are two updates that the compensation manager does: 1) Assignment Changes (Usually changing the grade) 2) Salary.
    Issue is
    1) Once the compensation manager has done its changes and completed the 1st review...How can he do the review again with the remaining budget FOR THE LEFT OUT EMPLOYEES
    2) Once the compensation manager has done its changes and completed the 1st review...How can he do the review again with the remaining budget FOR THE EMPLOOYES WHO WERE GIVEN COMPENSATION IN THE FIRST CYCLE.
    Do let me know if i need to explain...

  • Need to stop Email Notification only from Compensation workbench

    Hi All,
    I Need to stop Email Notification only from Compensation workbench, if is there any possiblility kindly guide me guys as I am stuck up due to this.
    Regards,

    Hi,
    I can see two CWB workflows - bencwbfy.wft and benssenrtfyi.wft. These are available under $BEN_TOP. You can open these workflows through the Oracle Workflow Builder and note down their workflow names. Thereafter, you can download the definitions of these workflows (most current workflows from the database) from the database through the concurrent program - Workflow Definitions Loader - which should result in the wft files on the destination you've provided running the concurrent program.
    Copy those files from the server, and edit them locally using Workflow Definitions Loader to remove or redirect workflow notifications appropriately. Please be aware that this amounts to a customization so you should evaluate the impacts of doing this on your installation. Also, for CWB to support custom workflow, my understanding is that you need to be at Family Pack J or above (you may wish to validate this through Support, though).
    Regards,
    Rakesh

  • HRMS Configuration Workbench

    Sorry, but I'm new to HRMS and interested to start using Configuration Workbench.
    Can any one advice from where I can start.
    First, i don't know how to access it, which responsiblity ? or tool I should use?

    Welcome to the forums !
    Pl post details of OS, database and EBS versions. Pl see these MOS Docs
    Getting Started with HRMS Configuration Workbench          (Doc ID 281421.1)
    Oracle HRMS Configuration Workbench Release Notes, Release 12.1.3          (Doc ID 1103699.1)
    More information will be available in the Apps Documentation for your release at http://www.oracle.com/technetwork/documentation/applications-167706.html
    HTH
    Srini

  • HRMS configuration workbench - Benefits upload

    Hi All ,
    We are trying to use the HRMS Configuration workbench to load the benefits data  , the seeded Web ADI excel spreadsheet always has only 20 rows in it by default . Is there a setting that could be changed so that by default the excel spreadsheet has more number of rows , other than 20 . Please let me know .
    Any replies are greatly appreciated !!
    Thanks for your time and attention

    1. Is this still and issue for you?
    2. Did you log a service request with Oracle Support. If so, what is the SR number?
    Regards,
    Greg

  • How to run Discoverer reports from Compensation Workbench?

    Has anyone been able to successfully add a Discoverer report that can be run run from Compensation Workbench? If so can you share the steps?
    I followed the steps described in the following Oracle note, but no luck.
    Adding Discoverer Reports to the Compensation Workbench Home Page [ID 464014.1]
    Thanks
    Jaya

    Please post the details of the application release, database version and OS.
    848716 wrote:
    Has anyone been able to successfully add a Discoverer report that can be run run from Compensation Workbench? If so can you share the steps?
    I followed the steps described in the following Oracle note, but no luck.
    Adding Discoverer Reports to the Compensation Workbench Home Page [ID 464014.1]What is the error you get after following the steps in this doc?
    Thanks,
    Hussein

  • Compensation workbench

    Hi i have some questions on compensation workbench
    1.Can you load new Grades to an existing setup using Config Workbench.
    2. Can you updated existing Jobs & Positions using Config workbench
    Need to update the Jobs with the grades created in #1
    Need to update DFF for Positions & grades created in #1
    3. Can we update employee records – the new Grades, Positions created above using Config Workbench. Hope some one answers

    Hi i have some questions on compensation workbench
    1.Can you load new Grades to an existing setup using Config Workbench.- No- but you can update
    2. Can you updated existing Jobs & Positions using Config workbench: Yes
    Need to update the Jobs with the grades created in #1 No
    Need to update DFF for Positions & grades created in #1
    3. Can we update employee records – the new Grades, Positions created above using Config Workbench. Hope some one answers Yes

  • HRMS Configuration Workbench - Upload FSA Benefit Elections

    Using HRMS Configuration Workbench to upload benefit elections I receive ORA-01403 when trying to load an amount for a FSA plan. I am entering the amount in the "Benefit Val" column on the upload spreadsheet. The following error is generated:
    ORA-01403: no data found ORA-01403: no data found in Package BEN_ENROLLMENT_PROCESS Procedure CREATE_ENROLLMENT. The DataPump produces an error whenever an amount for an FSA plan is specified. If FSA plans are set to "Declined" then the Datapump elections are successfully updated.
    Our FSA plan has a Standard Rate configuration with "Calculation Method" = "Set Annual Rate Equal to Coverage" a "Coverage" calculation is specified, and the "Calculate Enrollment" box is checked. Our "Coverage Calculation" screen has a "Calculation Method" = "Flat Amount" and the "Enter Value at Enrollment box checked.
    Can someone offer some advice?

    1. Is this still and issue for you?
    2. Did you log a service request with Oracle Support. If so, what is the SR number?
    Regards,
    Greg

  • Restricted Access in Compensation Workbench based on Security Profile

    Customer does not want the HR Professional to access at other team's data even when using Switch Manager in the below scenario.
    1) 2 CWB Plans (CWB Plan for A, CWB Plan for B) are built based on Supervisor Hierarchy. Each of the CWB plan is for a set of organisations for e.g a plan for Organisation 'A' and another for Organisation 'B'.
    2) HR Professionals have a security Profile which restricts them to view employees in either 'A or 'B' organisation.
    3) Switch Manager is enabled for the 'Compensation Workbench Administrator'
    4) There exists a common manager who manages people from 'A' and from 'B'
    5) When HR Professional (who is in the A organisation) switches as the Manager in point (4), he gets to see the details of the 'CWB Plan for B' along with the 'CWB Plan for A' even though the people in the B plan are not part of the HR Professional's security Profile

    Hi,
    Thanks alot. its working fine
    Can we configure DCL Relation two times in one information filed ??? i should not create not more than fields to this requirement.
    Type -> subtype = DCL already existed
    Now, i want to Create DCL to
    Subtype ---> Security group
    As per my requirement, if i change the security group in checkin form, values should be change in the SubType drop down list.
    Created checkin profile there was DCL relation to " Type and "Sub Type" . now i want to map Relation ( DCL ) for subtype to security group.
    i was trying do for DCL for subtype and security group. but there was already existing DCL created for subtype information field (Relation configuration done for content type). even though i was trying to do for DCL in Security group information field. but, i could not find security group information field in configuration manager.
    Now what should i do ?? how to create DCL to subtype and security group ??
    Help would be appreciated.
    yt

  • How much does it cost to implement peoplesoft HRMS ?

    Hi All,
    how much does it cost to implement peoplesoft hrms (including license etc ) ?
    Thanks

    It depends.
    you may refer to the link below to get an idea of the retail price list
    http://www.oracle.com/us/corporate/pricing/peoplesoft-price-list-070612.pdf
    It would benefit if your organization is a university or an International Org.
    Discounts upto 80% can be availed.
    Bear in mind to strike a deal before May of any calendar year as that is there year end closing.

  • Discoverer 10g custom CWB report to Compensation Workbench

    Has anyone been able to successfully add a custom Discoverer CWB report that managers can run through Compensation Workbench?
    If so, do you have any instructions on how to accomplish this?
    Thanks for your help.

    You must create a function of type 'SSWA plsql function' with HTML call 'OracleOasis.RunDiscoverer' attach this function to the menu with a prompt
    hope this helps
    Regards
    Ramesh Kumar S

  • Setting Global Budget in compensation workbench

    Hi
    I have configured CWB R12. I need to know how to set a global company budget for distribution to all managers.
    I have configured and assigned a Budget Manager and a Compensation manager role.
    Eg. The company has awarded 8% of total salaries to salary increases. I need to cascade 8% default to all managers to distribute to their directs.
    regards
    Mahomed Adam

    Debojyoty:
    Are you set up, or do you have managers who are set up with direct reports who are eligible for your compensation plans? Have you run the Participation Process: Compensation Workbench? You will need to have met both of those requirements before this will work for you. (I'm assuming you set up your tasks as part of your overall setup, per this Metalink Note.)
    You will also need to go through and set the budget as the Highest-Level Manager, then you can use the Switch Manager functionality to begin allocating your budgets to your managers. After that, switch to a manager and then do your allocations.
    Let me know if any of this helps. Best of luck to you!
    Take care,
    Mark

  • Compensation Workbench Combination Plan

    Hi All,
    We are trying to setup the combination plan. And we are stuck at budgets and rates.
    We have two options Merit and Bonus. Requirement is to deduct the budget for both
    options from same single budget. So do we need to create distribution and worksheet
    budgets on plan level or option in plan level. Found something for component plan setup.
    Compensation Workbench Rate and Budget Overview [ID 369711.1].
    But could not find something similar for Combination plan.
    Any help would be really appreciated.
    Regards

    Unfortunately I can't help you on questions 1-3, but for question #4 I believe you are on the right track. See below.
    4. While setting up Plan enrollment Requirements > Timing, the dates are really confusing
    a. Availablity Period - Plan will be available during this period? - Yes this is the period of time you want the plan to be accessible (update or read only) in MSS.
    b. Assigned Life Event date - life event will evaluating the eligibilty and rates as of this date? - this is the "as of" date that the data is pulled (title, salary etc as of that date).
    c. Year Period - ? - For us this is just a display field - it will show the managers what year they are doing the evaluation for. It doesn't factor into any of the calculations.
    d. Self Service update period - Avalibility of the plan for changes through self-service? - this is the period you want the plan to be open for updates. This only controls the dates, you need to handle the individual managers access via the Employee Administration function in CWB. Managers will still be able to view the data as read only after this date, depending on what dates you used for the Availability Period.
    e. Assignment change become effective dates - Increase and bonus will be effective as of this date? - Yes, assuming you have the post process set up to pull that field for the effective date. We fill it in but it is ignored because we have another custom post process that we can fill in the effective date as a parameter when we submit the process.
    The Availability Period and Self Service Update Period dates can be altered after you run the plan.

Maybe you are looking for