Strange Yellow Boxes

Hello
I've noticed that strange yellow boxes will randomly appear on my display. This happens both on my external display and hte laptop screen. I've attached a screen shot of what it looks like. Does anyone know what could be causing it? It's not application specific.

That's very likely a problem with your GPU, especially if it occurs on both built-in and external screens. If you purchased the extended AppleCare plan, the repair should be covered. If not, it will have to be repaired at your own expense.

Similar Messages

  • Strange Dialog boxes popping up

    During the past several weeks I have been getting strange dialog boxes popping up on my desktop and all my efforts, including stripping out my hard drive and reinstalling a brand new version of Mac OS10.5.0 then upgrading to 10.5.6 via the combo download, has failed to cure the problems.
    The first one is:
    The application aosnotifyd quit unexpectedly
    2008-12-31 17:51:59 +0700
    EXCBADACCESS (SIGBUS)
    KERN PROTECTION FAILURE at
    0x00000000000000005
    Thread 0 Crashed
    0 CFRetain + 36
    1 CFDictionaryAddValue + 530
    2 CFDictionaryCreate + 132
    3 _CopyDevice Attributes + 618
    4 _initializeServiceOnce + 148
    5 main +622
    6 start + 54
    The others refer to GrowlMenu and GrowlHelper also quitting unexpectedly.
    Can you advise what might be causing these and what might be done to solve the problem?
    Many thanks
    Roger

    Hi Carolyn,
    Many thanks for the prompt response. However, it is not a kernel panic as I have had several of these in 2007 which I have satisfactorily resolved.
    No, the dialog box is not like that. I have been trying to get picture into the reply box (it's a .pdf file) but am unable to do so. The box is a white square with a yellow warning triangle sign with an exclamation mark followed underneath by the words as shown below :
    The application aosnotifyd quit unexpectedly
    2008-12-31 17:51:59 +0700
    EXCBADACCESS (SIGBUS)
    KERN PROTECTION FAILURE at
    0x00000000000000005
    Thread 0 Crashed
    0 CFRetain + 36
    1 CFDictionaryAddValue + 530
    2 CFDictionaryCreate + 132
    3 _CopyDevice Attributes + 618
    4 _initializeServiceOnce + 148
    5 main +622
    6 start + 54
    Underneath there are two buttons "Ignore" and "Report". The "Report" button reports the problem to Apple while the "Ignore" button dismisses the dialog box.
    What I have done so far is:
    1. Wiped my HDD clean and did a reinstall of OS 10.5.0 then upgraded to 10.5.6 followed by all the system ugrades from the Apple Update application.
    2. Reinstalled all my apps and settings from my Time Machine backup.
    3. From the OS10 startup disk, I repaired my permissions and the hard drive. No problems there.
    4. Booted into terminal mode and ran the /sbin/fsck -fy check and no problems there either.
    5. Checked the install disk that came with to computer but there is no extended hardware test suite on it (Go figure!) so I am unable to go that route.
    Other than this, I do not see what I can do so any help you, or anyone else can give would be most appreciated.
    Incidentally, in May 2008, I posted a question very similar to yours regarding the intermittent and unintended restart problems but, strangely, did not get one response.
    Again, my sincere thanks and i look forward to receiving some more helpful advice.
    Cheers
    Roger

  • I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

    I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

    I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

    you launch QT then go to its REGISTRATION

  • How can I turn off the annoying yellow boxes that have started appearing?

    It seems that recently I have started having annoying yellow boxes appearing when I hover over thing in the finder window. This is something that I didn't have going on in the previous 3 versions of Mac OS X.
    Here's an example...
    How can I get rid of them?

    This appears to be a third party extention of some sort with the bright yellow background?  Start there if you modified.
    Might look at the following:
    https://discussions.apple.com/message/3515011?messageID=3515011#3515011
    or
    http://www.macworld.com/article/1055202/termtooltips.html

  • Why can't yellow box appear on year beyond 2 years?

    I create many events in 2014 in iCal. When I select list, it show only up to 2 years?  Same thing with yellow box mark on each month didn't show beyond 2 years. Is there I can set up?

    Something with your installation?  I have played full lenght (90-120min) movies on my Mac, in Linux and on Windows and never encountered any problems.
    Sometimes you may run into a codec problem on an older Windows installation?  Or there are a ton of freeware and shareware players for Windows, but not all of them are equally good, so the player program may be at fault.
    Also on windows, depending on what security and/or AV software you use, it can interfer with display of large files.
    At work I have to use a quad-core Windows 7 Pro (64bit) machines, but I've streamed large video's just fine (training programs or previously recorded webinars and such).  With the right software and setup, Windows has no problems with large videos.

  • I want to print edited Pages documents with Comments written in margins, not yellow boxes

    Can anyone tell me a way to use Track Changes to edit a Pages document so my comments are printed in margins, not hidden in yellow boxes. I was able to do this on Word documents, but my students are now using Pages. Neither they nor I can see all comments unless we click to open them one at a time in Pages. We would like to see comments in the printed document as well as a line crossing out words I suggest as deletions.

    You are using the wrong application.
    Use Pages '09. Or continue using Word.
    Peter

  • Yellow Boxes around type in normal view mode but not in preview?

    There are these yellow boxes that appear around type when in normal view mode, but when in preview mode it disappears.....any idea of what I can do to alleviate this issue? Here is an image of the problem....  

    This link should explain it:
    Field Guide to Composition Highlighting | InDesignSecrets

  • Strange red boxes!

    Strange red boxes appear around my ap icons on safari and firefox when looking at iCloud and also in some aps like iPhoto. It does not appear in Chrome...
    Can anyone help?

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Is it possible to hide the yellow box that appears when you scroll over any object in the form?

    Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

    Hi,
    Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
    Try clearing that.
    Bruce

  • How do I get rid of this yellow box with my name/address that is stuck at top of my screen?

    I have this annoying yellow box at the top of my screen.  I am guessing my baby girl was typing on the computer and hit some combination because now I have this yellow box on the top of the screen with my name and address in it and I can't move it or make it disappear.  Any ideas?
    Also, how do I defragment my iMac?
    Thanks,
    Rob

    Re the yellow box, have you tried restarting?
    If you click on the box, what application name is displayed for the app menu (that's the first menu to the right of the Apple menu)?
    Re defragmenting your Mac, such is usually not needed with OS X. OS X usually takes care of that itself, on the fly. What causes you to think it may be necessary to defragment the drive?

  • How do I get rid of an annoying yellow box displaying file data?

    Within the last couple of days a yellow box displaying details of any graphic file beneath the cursor has started to appear when I switch spaces. It stays on screen for ten seconds then disappears. Clicking the mouse also removes it. It is very irritating. I recall something like this happening some time ago and was told how to remove it, but don't remember how. I would welcome suggestions.

    I'm not seeing anything like that. Did you install anything lately that might be causing that?

  • Strange Black Box around every prompt I am given...

    This is very strange. I started up iChat for the first time on MBP and am now having a very strange occurance. At every prompt there is a strange black box around it. For example, right now there is a black box around the back arrow in my safari browser. When I open the finder there is a black box around my hard drive. I just opened system preferences and there is a black box around the back arrow in system preferences box...
    Can anybody help me?
    MacBook Pro 2GHz, PowerBook G4, PowerMac G4   Mac OS X (10.4.5)  

    heheh ya it's funny when you look at the people who just hear the mac talking and they don't know wat to do.. but ya.. universal access is only for that.. for the F8 key is exposè, which is nothing related to Universal Access at all, so you can keep Universal Access options off and exposè will still running
    Anyway, you can configure both from the System Preferences.

  • Yellow box around rewind

    I have created a custom simulation with the Rewind box
    checked in Skin. When I publish the simulation and play it back,
    sometimes a yellow box briefly surrounds the rewind icon in the
    lower left corner. Sometimes it happens randomly. Other times it
    happens only when I enter text and then press the tab key on my
    keyboard. I have set up the tab key (instead of Enter) to accept
    data input.
    Any suggestions on how I can stop this?
    Thanks.

    Hi lionfriend
    I'm doubtful that you will be able to overcome it. Here's the
    deal. Normally the highlight moves from selectable item to
    selectable item on the page. Usually when one presses the tab key,
    as you have seen.
    There is no way I'm aware of to prevent it. Nor is there any
    way to change the color from yellow to a more desirable shade.
    Sorry... Rick

  • "Breaking" the yellow box in Page Thumbnails?

    I received a large, 26 page Pages document. I want to insert more pages between the current pages, but am unable to.
    In the Page Thumbnails many of the pages are "locked" together in a yellow box. Not sure how to "break" it?
    Any help greatly appreciated,
    Phil

    Question asked and responded many times !
    Insert a section break.
    Yvan KOENIG (VALLAURIS, France) mercredi 21 avril 2010 19:40:34

Maybe you are looking for

  • Export File Transformation

    Hi Experts, I have a issue with the Export package in BPC 7.5. I need to export the amount with comma, so i define in the TRANSFORMATION FILE" the option AMOUNTDECIMALPOINT= "," but BPC requires that option DELIMITER has to be different from option A

  • Generate an Attachment from an XDATA

    Hello, i have the following problem: i've written an WebDynpro where you can upload some files. Later after an approve there will be a creation of an prelimanary posted accounting doccument. in this step i want to attach data to the acc-document. The

  • Show channels with own time channel and different length in one 3D graph

    Hi, How can i show channels with own time channel and different length in one 3D graph? My consideration looks like this, but i didn't found a solution with acceptable performance. ( i have many channels to merge and many data in them) i have 4 Chann

  • Data Loads in Development System

    Hi,    I need to stop all the data loads (Master/Transaction) iin Development system.as basis team are doing some backup and patch upgrade they asked me to stop all data loads in bw development. As this is my 1 week in this projects here there are so

  • Reg : Dynamic Drown list in ALV Report

    Hi Guru's, Please help on showing Dynamic drop down list in ALV Report. My requirement is to show sales partner function in ALV report for each and every line.Every line item may have different partner function. Regards P.Senthil Kumar