Strangeness with payment. two plans.

strangeness with payment. somehow create two annual plan. write programs that I have one day to the end of the subscription, even though I paid for a month yesterday. you have Russian support? where you can call?

system is the most uncomfortable I've ever seen. where the interface so that I can pay for a month at any moment? apparently on my card does not have the money when the system took off payment. but then I should be able to pay at any time until the end of my subscription. now it has created me a second plan. I need to remove the new second plan and make the payment for the month of use!

Similar Messages

Down Payments with out Billing plans is possible ?

Hi experts,
1. Is it possible Receiving down payments with out Billing plans?
Scenario is customer pays 50% payment firist and remaining amount pays before PGI. so how shall i map? Currently am receiving advance amount by using F-29 t.code.
2. If customer cancels his Sales Order how shalli pay advance amount return.
Thanks In advance
Rajendra

HI rajendra,
it is not possible to use downpayments without billing plan.either u have use milestone or periodic billing depending on business requirement.
if u r recieving advance from customer directly thru FI route ,system would generate accounting doc (parking doc ) as a reference which goes to particular G/l account.
use that doc number as reference and map it to downpayment condition record thru SD route in vk11,so that when ever u create a sales order system generates downpayment document with ref to this cond record.
if customer cancels order ,condition record for advance recived still exists which can be used to next transaction as advance.
but crucial part is once u have done PGI and billing for the advance recieved ,u will have to mark this conditionrecord as deletion or expired.sothat system will not use this or duplicate into other transactions.
this is feesible and achievable.
reward if helps !!!!!!

Credit card invoice releasing to accounting with out payment card plan

Hi
We have an issue with respect to invoice. For an order with credit card, billing document type F2 is created but it doesn't have any payment card plan at header level but does have payment card plan at item level.But the invoice is released to accounting .
We were under impression that when payment card plan is not copied in billing document the invoice get stuck in "payment card error " and not released to accounting.
So please let me know if some body has an idea about the process and what kind of checks are done before releasing to accounting.
Regards
Veerendra

Big ticket items no matter what carrier you'll have the same issues. With the out of orders happening to contact every customer is a pain staking effort for any company. If the demand wasn't so high then it would be plausible.

Getting 'Trial Expired' on Photoshop but I pay for Creative Cloud Photography Plan (all up to date with payments)

Trial expired message when loading Photoshop, yet I am paying for Creative Cloud Photography plan, with payments up to date.

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Vendor invoices are blocked automatically with payment blck A instead of R

There is an issue with a specific vendor.This vendor's invoices are blocked automatically with payment block A instead of
payment block R.
I know that invoices are blocked when posted if there is a price variance exceeding 3% and/or 100 Euro with payment block R.The invoices with payment block A are not included in the report Z1PE which is used by the Production Planning in order to monitor the blocked invoices and these invoices remain blocked for a long time until the vendor requests their payment.Could you please check why this happens?

HI,
Discuss with your MM Consultant, in MM there is a facility to block the invoice automatically in certain scenarios.
Thanks & Regards,
Shashi Kanth.

Can I install Adobe Creative Cloud in more than one computer with the individual plan?

I don´t have clear about the diference between individual plan an teams. My questions are:
Can I install Adobe Creative Cloud in more than one computer with the individual plan?
The team plan means that I have to pay for US$70 for each computer that i want to install the creative cloud even if I am the only user?

Hi heymarusia,
Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Regards,

No Planning happening with scope of Planning for total Planning

Hi SAP Gurus,
The Scenario is for Consumption based planning and MRP run.
I have created a New Entry under Scope of Planning for total Planning run and entered the required two plants under sequence of Plants.
I have also entered manually consumption values for trial materials in those two Plants. I maintained MRP and Forecast View.
I then ran MD01 using the Scope of Planning created. But when I check the MD04 results for trial materials, no Planning has happened.
I shows a message "Pl carry out Forecast for material xxx in Plant xxx "
Then using T.Code- OMDO, I created a variant for each Plant and also Scheduled. But after then also with MD01, No planning is happening.
When I check under T.Code - OMDU, the respective Plants were activated
Pl guide me the steps for Creating of Scope of Planning and then how to set up planning file and what could be the reason materials are not getting Planned.
thanks and regards,
R.Velmurugan.

Dear Mariano,
MRP type VV (forecast based Planning) is used for these materials.
I defined Scope of Planning for Total planning and included Plants in sequence.
Then I created new Variants for Planning file entries for these Plants (T.Code - OMDO).
Then I created new Variants for Planning file entry consistency for these Plants (T.Code - MDRE)
After then I executed Mass Forecast (T.Code - MP38) and then carried out total planning run using T.Code - MD01.
Now the materials are getting planned.
I missed Forecast run earlier.
I found the reason for the problem, hence closing the thread.
Thanks to Mariano and Daniele for your inputs.
Regards,
R.Velmurugan

Trying to do something very strange with layouts and painting components

I'm trying to do something very strange with changing the layout of a container, then painting it to a bufferedImage and changing it back again so nothing has changed. However, I am unable to get the image i want of this container in a new layout. Consider it a preview function of the different layouts. Anyway. I've tried everything i know about swing and have come up empty. There is probably a better way to do what i am trying to do, i just don't know how.
If someone could have a look perhaps and help me out i would be much appreciative.
Here is a self contained small demo of my conundrum.
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.border.LineBorder;
// what is should do is when you click on the button "click me" it should place a image on the panel of the buttons in a
// horizontal fashion. Instead it shows the size that the image should be, but there is no image.
public class ChangeLayoutAndPaint
     private static JPanel panel;
     private static JLabel label;
     public static void main(String[] args)
          // the panel spread out vertically
          panel = new JPanel();
          panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
          // the buttons in the panel
          JButton b1, b2, b3;
          panel.add(b1 = new JButton("One"));
          panel.add(b2 = new JButton("Two"));
          panel.add(b3 = new JButton("Three"));
          b1.setEnabled(false);
          b2.setEnabled(false);
          b3.setEnabled(false);
          // the label with a border around it to show size in a temp panel with flowlayout to not stuff around
          // with the actual size we want.
          JPanel thingy = new JPanel();
          label = new JLabel();
          label.setBorder(new LineBorder(Color.black));
          thingy.add(label);
          // the button to make things go
          JButton button = new JButton("click me");
          button.addActionListener(new ActionListener(){
               public void actionPerformed(ActionEvent e)
                    //change layout
                    panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
                    panel.doLayout();
                    //get image
                    BufferedImage image = new BufferedImage(panel.getPreferredSize().width, panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
                    Graphics2D g = image.createGraphics();
                    panel.paintComponents(g);
                    g.dispose();
                    //set icon of jlabel
                    label.setIcon(new ImageIcon(image));
                    //change back
                    panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
                    panel.doLayout();
          // the frame
          JFrame frame = new JFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setSize(400,200);
          frame.setLocation(100,100);
          frame.getContentPane().add(panel, BorderLayout.NORTH);
          frame.getContentPane().add(thingy, BorderLayout.CENTER);
          frame.getContentPane().add(button, BorderLayout.SOUTH);
          frame.setVisible(true);
}

Looks like you didn't read the API for Container#doLayout().
Causes this container to lay out its components. Most programs should not call this method directly, but should invoke the validate method instead.
There's also a concurrency issue here in that the panel's components may be painted to the image before revalidation completes. And your GUI, like any Swing GUI, should be constructed and shown on the EDT.
Try this for size -- it could be better, but I've made the minimum possible changes in your code:import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BoxLayout;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import javax.swing.border.LineBorder;
public class ChangeLayoutAndPaint {
private static JPanel panel;
private static JLabel label;
public static void main(String[] args) {
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        // the panel spread out vertically
        panel = new JPanel();
        panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
        // the buttons in the panel
        JButton b1, b2, b3;
        panel.add(b1 = new JButton("One"));
        panel.add(b2 = new JButton("Two"));
        panel.add(b3 = new JButton("Three"));
        b1.setEnabled(false);
        b2.setEnabled(false);
        b3.setEnabled(false);
        // the label with a border around it to show size in a temp panel with flowlayout to not stuff around
        // with the actual size we want.
        JPanel thingy = new JPanel();
        label = new JLabel();
        // label.setBorder(new LineBorder(Color.black));
        thingy.add(label);
        // the button to make things go
        JButton button = new JButton("click me");
        button.addActionListener(new ActionListener() {
          @Override
          public void actionPerformed(ActionEvent e) {
            //change layout
            panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
            //panel.doLayout();
            panel.revalidate();
            SwingUtilities.invokeLater(new Runnable() {
              @Override
              public void run() {
                //get image
                BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
                    panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
                Graphics2D g = image.createGraphics();
                panel.paintComponents(g);
                g.dispose();
                //set icon of jlabel
                label.setIcon(new ImageIcon(image));
                //change back
                panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
                //panel.doLayout();
                panel.revalidate();
        // the frame
        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(400, 200);
        frame.setLocation(100, 100);
        frame.getContentPane().add(panel, BorderLayout.NORTH);
        frame.getContentPane().add(thingy, BorderLayout.CENTER);
        frame.getContentPane().add(button, BorderLayout.SOUTH);
        frame.setVisible(true);
}db
edit I prefer this:import java.awt.BorderLayout;
import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.*;
public class LayoutAndPaint {
JPanel panel;
JLabel label;
public static void main(String[] args) {
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        new LayoutAndPaint().makeUI();
public void makeUI() {
    JButton one = new JButton("One");
    JButton two = new JButton("Two");
    JButton three = new JButton("Three");
    one.setEnabled(false);
    two.setEnabled(false);
    three.setEnabled(false);
    panel = new JPanel();
    panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
    panel.add(one);
    panel.add(two);
    panel.add(three);
    label = new JLabel();
    JButton button = new JButton("Click");
    button.addActionListener(new ActionListener() {
      @Override
      public void actionPerformed(ActionEvent e) {
        layoutAndPaint();
    JFrame frame = new JFrame();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.setSize(400, 400);
    frame.add(panel, BorderLayout.NORTH);
    frame.add(label, BorderLayout.CENTER);
    frame.add(button, BorderLayout.SOUTH);
    frame.setLocationRelativeTo(null);
    frame.setVisible(true);
private void layoutAndPaint() {
    panel.setLayout(new BoxLayout(panel, BoxLayout.X_AXIS));
    panel.revalidate();
    SwingUtilities.invokeLater(new Runnable() {
      @Override
      public void run() {
        BufferedImage image = new BufferedImage(panel.getPreferredSize().width,
            panel.getPreferredSize().height, BufferedImage.TYPE_INT_ARGB);
        Graphics g = image.createGraphics();
        panel.paintComponents(g);
        g.dispose();
        label.setIcon(new ImageIcon(image));
        panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
        panel.revalidate();
}db
Edited by: DarrylBurke

Same sqlID with different execution plan and Elapsed Time (s), Executions time

Hello All,
The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
17th Oct 18th Oct
221,808,602
21
2tc2d3u52rppt
213,170,100
72,495,618
9c8wqzz7kyf37
209,239,059
71,477,888
9c8wqzz7kyf37
139,331,777
1
7b0kzmf0pfpzn
144,813,295
1
0cqc3bxxd1yqy
102,045,818
1
8vp1ap3af0ma5
128,892,787
16,673,829
84cqfur5na6fg
89,485,065
1
5kk8nd3uzkw13
127,467,250
16,642,939
1uz87xssm312g
67,520,695
8,058,820
a9n705a9gfb71
104,490,582
12,443,376
a9n705a9gfb71
62,627,205
1
ctwjy8cs6vng2
101,677,382
15,147,771
3p8q3q0scmr2k
57,965,892
268,353
akp7vwtyfmuas
98,000,414
1
0ybdwg85v9v6m
57,519,802
53
1kn9bv63xvjtc
87,293,909
1
5kk8nd3uzkw13
52,690,398
0
9btkg0axsk114
77,786,274
74
1kn9bv63xvjtc
34,767,882
1,003
bdgma0tn8ajz9
Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
The other big difference is the average read time on two days
Tablespace IO Stats
17th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
947,766
59
4.24
4.86
185,084
11
2,887
6.42
UNDOTBS2
517,609
32
4.27
1.00
112,070
7
108
11.85
INDUS_MST_DATA01
288,994
18
8.63
8.38
52,541
3
23,490
7.45
INDUS_TRN_INDX01
223,581
14
11.50
2.03
59,882
4
533
4.26
TEMP
198,936
12
2.77
17.88
11,179
1
732
2.13
INDUS_LOG_DATA01
45,838
3
4.81
14.36
348
0
1
0.00
INDUS_TMP_DATA01
44,020
3
4.41
16.55
244
0
1,587
4.79
SYSAUX
19,373
1
19.81
1.05
14,489
1
0
0.00
INDUS_LOG_INDX01
17,559
1
4.75
1.96
2,837
0
2
0.00
SYSTEM
7,881
0
12.15
1.04
1,361
0
109
7.71
INDUS_TMP_INDX01
1,873
0
11.48
13.62
231
0
0
0.00
INDUS_MST_INDX01
256
0
13.09
1.04
194
0
2
10.00
UNDOTBS1
70
0
1.86
1.00
60
0
0
0.00
STG_DATA01
63
0
1.27
1.00
60
0
0
0.00
USERS
63
0
0.32
1.00
60
0
0
0.00
INDUS_LOB_DATA01
62
0
0.32
1.00
60
0
0
0.00
TS_AUDIT
62
0
0.48
1.00
60
0
0
0.00
18th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
980,283
91
1.40
4.74

The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
You wrote with different execution plan, I think, you saw plans. It is very difficult, you get old plan.
I think Execution plans is not changed in different days, if you not added index or ...
What say ADDM report about this script?
As you know, It is normally, different Elapsed Time for same statement in different day.
It is depend your database workload.
It think you must use SQL Access and SQl Tuning advisor for this script.
You can get solution for slow running problem.
Regards
Mahir M. Quluzade

I have problem with payments.

Hello. I have problem with payments.
I have choosen year CC plan, with monthly payments, and it was automated process untill this month. I cleaned up my bank account, before Adobe get charge. I have got reminder about payment, and today I have money on bank account, but its too late and I don`t know what have I do. Sorry for my bad english. Anyone can help?

contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html

How data update when there is two planning cubes in one aggregation level

If we have two planning cubes and a multi-cube includes these two planning cubes.
then we have the aggregation level defined based on this multi-cube.
if the characteristics and key figures defined in aggregation level all are included in these two planning cubes. When we plan the data with plan query based on this aggregation level, which plan cube will be updated with plan data, or both of them?

HI Wang,
yes as Bindu said you need to restrict the layout based on the infoprovider.
Lets assume that we have a multi provider M1 and it has two planning cubes cube1 and cube1.
in case u develop a layout for updating cube 1 give the restriction in the filter section as infoprovider = cube1.
or the vice versa.
Else ur layout must input values for both the cubes simultaneously, then in that case create two restricted KF with each having a restriction for cube1 and cube 2.
so wen the user enters value for the first restricted KF it will get saved in cube1 and wen he enters value for the second restricted KF it will gets saved in cube2.
This is how it works. Guess this was useful to u.
Regards.
Shafi.

Down payment - billing plan bill. value

Hello people,
I would like to ask you for help with payment in advance scenario. I have one materiál in sales order with value and item category TAN. Then I put new item with item category TAO. Billing plan is active and is possible to edit data in it. What I have:
Is there any chance that in this field will be actual value of sales order - automatically?
Thank you.
BR,
David

Dear Abul Rahim,
few years ago there was a SAP consultant in our company and together with my colleague bulit this solution. It was never used (for down payment is still used very old solution which is hard to modify so I decided to try this "new one").
How it should work. Create standard sales order with requested materiál items. Then if down payment should happen, insert new service item with item category TAO. Then for this service item create FAZ invoice. After this document is cleared by incoming payment, delivery from sales order is created. And then standard F2 invoice.
This scenario works well, the only thing I do not like is to fill "Billed value" manually to "Billing plan".
As I assume, you mentioned use TAO item category for all "materiál" items. I am not sure whether this is proper solution. If I will have dozens of items to modify in case of down payment is necessary - sales people will hate me. And I am not sure how to handle delivery from this items. For me is preferred solution to use extra service item for down payment. If it means that there is necessary to fill amount, so be it. But if there is a way how to do it automatically, I would be happy.
Thank you and best regards,
David

One BR to copy data in two plan type

Hi, I encountered this problem with the business rules.
In order to run the what-if scenario analysis, I would like to be able to copy the data from one version to another version using a business rule. However, currently I have two plan type within one planning application. And I have to use two business rules (with run-time prompt) to make the data copy. The run-time prompt for the 2 BRs are the same, for example, same entity, samel copy-from version, and same copy-to version.
I would like the users to just run one business rules (or maybe a sequence) with one set of RTPs to choose, and it allows them to copy both plan type. I have tried to use the sequence, but it seems that the sequence would require the 2 sets of RTPs to be input.
Any advice is appreciated.
THANKS

Alp,
Yes. I have tried to use the global variables, with the BR sequence. However, since the two BRs are for two different plan type (essbase cubes), when I choose the merge variable option, it did merge the global variable, and also limit the database name selection to one. (I can not choose the "hide" for the database).
Any other suggestion?
Thanks

HT1296 My i.d verified with payment method but can't use it?

My i.d verified with payment method but can't use it? saying go to i tues support why??

This just happened to me last night.
Are you in Canada?
IF so, apparently you can't buy apps with the gift cards...Bizzare I know. It'some strange Canadian Law.
I am doing my best to get apple to refund my card, since I only bought it for apps.

Hi, my current plans and products include Creative Cloud Photography plan (one-year) and Creative Cloud single-app membership for Photoshop (one-year), I only use photoshop occasionally and for very basic things, are these two plans required for basic p

Hi, my current plans and products include Creative Cloud Photography plan (one-year) and Creative Cloud single-app membership for Photoshop (one-year), I only use photoshop occasionally and for very basic things, are these two plans required for basic photoshop use or am I able to go with one or the other ?

PS is part of the photography plan, so your single app plan is redundant.
Mylenium

Strangeness with payment. two plans.

Similar Messages

Maybe you are looking for