Stranger error:Old file not found.However,a file of the same name was found

Hi All,
I appologise if its not the right forum...
I am a bit baffeled here by the following error when I am trying to install Java SDK or just JRE.
I upgraded my windows 2000 box to win XP home edition, installed the latest updates etc and then tried to install java....
and got the following error
bin\appletviewer.exe:
Old file not found.However, a file of the same name was found.No updates done since file contents does not match.
I have removed everything from system that I could imagine might be using Java directly or indirectly. No JRE on the system, no old java folder under C: drive etc, But I still get the same error. I have never come accross a stupid error like this before. Any help will be appreciated. Thanks
Message was edited by:
Khalid.Ali

hunmm..thanks for the reply, I will try to find appletviewer.exe, however, my guess is that file should be there cus I am just trying to install it from standard java SDK installation.
Yes I did not do checkdisk and I will do that and post my findings

Similar Messages

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

Why does L8 not distinguish between sample instruments of the same name????

I just installed Logic 8. My problem is, that I have a good deal of other EXS24 instruments with generic names, such as "Mark II", or "Vibraphone". That shouldn't actually be a problem, but it is with Logic 8 because every time I open one of my existing projects, it replaces one of those sample instruments with one of its new (or even one of its Legacy) instruments if it bears the same name. That stinks. Can't it figure out which sample it originally was with? It is a real pain in the bum having to reopen the original sample, and than match every single parameter to the original setting, manually, one by one. This whole thing wouldn't be so bad if you could just copy the parameter settings WITHOUT including the actual selected sample. Than I could just paste the intended parameter settings back onto the intended sample (that just so happens to bear the same name as one of Logic's factory sample instruments). I didnt have this problem with Logic 7. What gives? Is there a way around this? It is getting old going through all my projects to fix this. Thanks!

Hello, man with the spoof hobbitname,
Try doing it the other way around: put your legacy instruments in the main folder, after you've removed the new ones with the same names - including their samples folders.
*Like so:*
+(the folders are empty - I don't actually have them)+
It should work this way...
regards, Erik.

Trying to backup one of my iPhoto libraries I keep getting a error message that basically says that the file could not be backed up because there is another file on the external drive with the same name, etc. There is no other file.

While trying to copy one of my iPhoto libraries to an external hard drive I get the following error message "You can’t copy “iPhoto Library old” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." There is no other file on the external drive with this name. I have asked this question before and was told that there are some duplicate photos (files) in my library and I needed to go to "show file contents" and look at certain files to find duplicates and delete the duplicates. I did all of this and the library will still not copy and always stops copying in the exact same place on each attempt. Any help would be greatly appreciated.

You've been deleting your actual Photos.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Best way forward now is to recover the surviving Originals from this library and start over from scratch.
Regards
TD

I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

COOKIE_DOMAIN=.hackers
I think this is the problem. .hackers is no valid cookie domain. You have to use something like:
.xy.ab
(two points)
I fear it is not possible to correct this easiely. First change the hostname to something allowed e.g. hackers.com
Then open an ldap browser and edit ou=iplanetamplatformservice,ou=services,dc=hackers
There is an entry with an xml. Copy the xml to an editor, search for .hackers, change it to a valid domainname.
Im not sure if a restart of the webserver is necessary here.
Another idea: You could also try to set the cookie domain to solnce.hackers, maybe this is accepted, even if it is not a cookie domain. But I dont know if this works...
hth
Chris

TS2529 I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

First backup the old phone to iTunes using right mouse click then backup after that restore from backup on the new device .

Creative Cloud error message :could not implemented unzip a file on temporarily directory (EX11)I tried many times but it was not working.

Creative Cloud error message :
could not implemented unzip a file on temporarily directory (EX11)
I tried many times but it was not working.

Nobody can tell you anything without proper system information. Failing extractions can have all sorts of causes. Start with a little system maintenance:
Installation Preparations | Mylenium's Error Code Database
Mylenium

Unable to connect to the analysis server the server name was not found

Hi,
One of the user is trying to run reports from PWA 2010 and gets the below error.
Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
Please advice why?

Dear Project Help,
Please help the community with more information.
Which kind of reports are you running? Excel using OLAP?
If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
Let me know if you need any help on this.
Cheers

Verifier Error: Exception handlers not sorted in ascending order by the off

Hello,
Java Card 2.2 did not convert my Applet !
Java Card 2.2.1 & 2.1.2 do not report this Error and the Applet is working !
What's wrong here ?
D:\save\smsTest>C:\Programme\Java\jdk1.5.0_06\bin\java -classpath D:\java_card_kit-2_2\lib\converter.jar;D:\java_card_kit-2_2\lib\offcardverifier.jar com.sun.javacard.converter.Converter -config SMS_JCDK_2_2.opt
Java Card 2.2 Class File Converter (version 1.3)
Copyright 2002 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
warning: You did not supply export file for the previous minor version of the package
parsing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\IExceptionConstants.class
parsing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\ITestConsts.class
parsing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\InfoData.class
parsing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\SMS.class
parsing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\StringConsts.class
converting com.gieseckedevrient.jctt.smsTest.IExceptionConstants
converting com.gieseckedevrient.jctt.smsTest.ITestConsts
converting com.gieseckedevrient.jctt.smsTest.InfoData
parsing D:\java_card_kit-2_2\api_export_files\java\lang\javacard\lang.exp
converting com.gieseckedevrient.jctt.smsTest.SMS
parsing D:\java_card_kit-2_2\api_export_files\javacard\framework\javacard\framework.exp
parsing U:\_Tools\java\43019-560\Annex_B_Export_Files\sim\toolkit\javacard\toolkit.exp
converting com.gieseckedevrient.jctt.smsTest.StringConsts
writing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\javacard\smsTest.exp
writing D:\save\smsTest\com\gieseckedevrient\jctt\smsTest\javacard\smsTest.jca
Verifier Error: Exception handlers not sorted in ascending order by the offset of the handler
Verification failed

Hello again,
it seams this error only occurs when using javac from JDK 1.5/1.6 (1.4 not tested).
When I us jdk1.3.1_11 to compile the java sources this error never occurs during conversion !

TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Dashboard Designer Error - You do not have sufficient permissions to complete the request.

Hi all
I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
You do not have sufficient permissions to complete the request.
If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
our report designer users as the site collection administrator.
Cheers
Tyson

Hi,
Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
Important To assign or change user permissions for dashboard items, you must have
Full Control permissions. Although you can create and publish dashboard items with
Design permissions, you cannot assign or change permissions for dashboard items unless you also have
Full Control (Site) or Site Collection Administrator permissions.
Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
Edit user permissions in Dashboard Designer
In the Workspace Browser, click PerformancePoint Content or
Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
In the ribbon, click the Home tab, locate the Item group, and then click
Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
Edit user permissions in a SharePoint list or document library
Locate the dashboard item that you want to modify in its SharePoint list or document library.
Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
In the SharePoint ribbon, click List Tools, and then click
Items. Locate the Manage section, and then click
Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
Please tell us if this approach shows different permissions assigned and solves your problem.
Thanks and best regards,
Martin
Martin W. Angler, MCTS
Blog angler.wordpress.com
Twitter: Follow me on twitter

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

Hi Spam_Valley,
I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
We may need to repair this. See the following resources for information:
iTunes 10 for Windows: If song titles don’t appear correctly
http://support.apple.com/kb/PH1468
Fixing Incorrect Song or Album Listings in iTunes
http://support.apple.com/kb/TA24677
Thanks,
Matt M.

I am getting EXACTLY the same "you don't have the required permissions" message that I see all over the net. 64 bit windows 7 ultimate. Many uninstalls and reinstalls. Yes, Itunes is in the program files x64 directory. Yes I get the same error there.

I'm getting the same error message as many other when I try to start Itunes. It was working correctly until I got an ipad 3 and installed some of the associated tools. Have uninstalled and reinstalled many times. Yes it's in the program files x64 directory. Yes I get the same error when I try to start direct from that folder instead of menus or desktop shortcuts. Did some registry cleaning. Nothing helps. Windows 7 ultimate, 64 bit. Please help.

The install fails with the error: "installer has insufficient privileges to access the directory >c:\ProgramData\Microsoft\Windows\StartMenu\Programs\itunes. The installation cannot continue". My user account is an admin account. I then retried the install by right-clicking and running the install with Admin Privileges. Same error results.
I don't have a Windows 7 box in front of me, so can you check something for me?
Navigate to that location on the PC look at the itunes item you see there. Is it a shortcut to your iTunes program file?
If it's just a shortcut, try dragging it out onto the desktop and doing another (64-bit) install. (With a 32-bit already in place, it may just offer to do a "repair install" instead of a full install.
Do you still get the error message or does the install go through smoothly this time?

Stranger error:Old file not found.However,a file of the same name was found

Similar Messages

Maybe you are looking for