Strategies for Changing Velocity

Greetings,
I'm about one-month new to Logic. I'm currently recording a bunch of Bach Inventions using software instruments. I could use some advice regarding the most straightforward options for:
(1) changing velocities within the piece. Let's say bar 3 is piano (p) and bar 6 then jumps to forte (f).
(2) adding crescendos and decrescendos.
Last night I experimented using velocity automation. While this worked, I'm wondering if this is the easiest way? What would experienced Logic users use to achieve the above two goals?
Thanks in advance.
-- Rob

There are many options in Logic.
Check out the transform window and the Hyper Editor. Both very cool ways to achieve what you want.
JG

Similar Messages

Purchase Order Release Strategies for Changed Amount

Hi Gurus,
We have a unique request from the business to set the release strategies for POs based on the Still to Deliver amount, not the Net Total Amount of the PO.
Example: Configuration is PO total amount <$5K requires only L1 approval. PO total amount >$5K requires L1 and L2 approval. PO was created for $8K and was release using L1 and L2 approvals. Receipts were posted to PO in the amount of $7K. Now the buyer has added an additional line item for $1K. The PO total amount now shows $9K ($8K + $1K), the Still to Deliver field shows only $2K ($1K from original remaining amount + $1K from new line item). Business wants the release strategy for this change order to go through L1 only since the Still to Deliver amount is <$5K.
Has anyone done this before? Any ideas??
Thanks,
Gabe

from http://help.sap.com/saphelp_40b/helpdata/fr/dd/2d547bb435d1118b3f0060b03ca329/content.htm
User exit M06E0004 is provided to enable you to adapt the release strategy determination process to meet your requirements.
This user exit allows you to change the communication structure for determining the release strategy for purchasing documents.
The following user fields are available:
USRC1
USRC2
USRN1
USRN2
In addition, communication structure CEKKOZZ is available, allowing you to use your own fields.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

Iphone 4s not syncing to iTunes *waiting for changes to be applied*

I have a brand new iphone 4s that wouldnt sync with my pc desktop and i recently got a new mbp and the same thing is happening an error keeps popping up in Itunes after the 2nd step of syncing and it says waiting for changes to be applied. Its really frustrating i restored my phone and it did nothing for the syncing just deleted all my apps...and ive researched these problem before and its obvioius a big occurance with other users and apple has done nothing?!?! wth !! and i have no voice memos on my phone so there is nothing to delete for those that have solved their issue that way....So if someone has a solution to help me sync my iphone 4s to my mbp i would greatly appreciate since obviously apple does not care to fix this issue!!!! terrible..

also tried to wifi sync and nothing ...

Solution: Syncing with my iTunes library an endless headache: Songs don't transfer, or songs transfer and show up as "other," or I get double copies, or "Over Capacity," or stuck on "waiting for changes to be applied."

iPod Touch 5g, 64GB, iOS 7.1. After my iPod data began showing up "Other," after an abrupt disconnection from iTunes during a sync I've spent the last week trying to fix it only to be thwarted at every attempt. I've tried resetting and restoring 6 or 7 times now, and all goes well until it gets to copying my library of music over. What I finally figured out is that 8,000+ songs is too many for iTunes to process all at once for some reason.
After several nights of leaving it connected all night I would find that the songs had physically copied and were occupying the ~45 gb of space on my iPod's storage, but were not showing up on my local library, instead listed as "Other" in iTunes and otherwise unusuable, or they would show up, but I'd have ~45 gigs of "Other," 45 gigs of "Audio," and would be "Over Capacity," by 30 gigs or so. OR it would be "Waiting for Changes to be Applied," for 12+ hours.
My work around: In iTunes, under the "Music" / "Sync Music" tab, instead of syncing "Entire Music Library," select "Selected Playlists, Artists, Albums, and Genres." You will have to indivually select the playlists, artists, albums, or genres and kept each bulk tansfer to <2000 songs at a time. The easiest way for me to do this was by selecting one genre at a time and copying it over. I had already taken the time to organize my library into 10 genres, you probably have more than 10. This is irritating and time consuming, but it's better than resetting my iPod over and over and over again to no avail.
Waiting for Changes? What iTunes is actually doing when it says it is "Waiting for Changes," or "Waiting for Items to Copy." iTunes for whatever reason does not reveal the relevent data being processed during a sync (didn't it used to?), but there are a couple ways you can decipher what it is actually up to. The first option is on the iPod; under Settings>General>iTunes Wi-Fi Sync it will tell you what it is up to during syncing. The other way on the iPod; under Music>Songs, scroll all the way to the bottom to see where it is at in the process. What iTunes, iTunes Wi-Fi Sync, and the bottom of the Songs library report are not always in agreement, but seeing all three will give you a better approximation of where you are in the syncing process and whether or not it is hanging.
This for me was successful as a workaround, but this is not a solution. Apple needs to fix this crap. Maybe they just want to make it so difficult to have a physical library of music on the local storage of the iPod that we will just give up and sign up for their Match service.

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

What is the path or TC for changing control of recon account in vendor

Hi Gurus,
Pl tell the TC or Path for changing the reconciliation account control for vendor as like in asset recon account.
Pl itsUrgens
Thanks in advance

Hi:
What i guess from your requirement that you need to control the field Reconciliation account, some users should be allowed to change the recon account and other should be restricted from doing so? If i am right then you can do that easily with the help of BASIS guy. F_LFA1_AEN Customer: Change Authorization for Certain Fields will do the needful for you.
Ask your Basis consultant to implement authorization's checks against F_LFA1_AEN for this Transaction code for the user profiles as desired by you. Before that do the necessary customization in SPRO as follows:
Define your change groups in the task level menu of Financial Accounting >A/R & A/P -> Credit management -> Define Field group-> Assign Fields -> Groups.
While assigning you can find the field LFB1-AKONT . Your issue will be resolved.
Regards

BAPI for changing delivery date and delivery time fields in LIKP table

Hi All,
Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
Please tell me experts if exists.
Thank you,
Raghu.

try these:
BAPI/FM to update LIKP and VTTK tables
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800

Stuck on "waiting for changes" to be applied during a restore from backup

I am on an iPhone 5s and before installing iOS 8, I made sure to create a backup of everything on my phone onto my laptop. The iOS 8 download completed and during the install, it would get stuck on a white screen with a black apple and a status bar 1/4 complete. I waited several hours and nothing changed, so I talked to someone at Apple and they said that I needed to restore the iPhone, get iOS 8 up and running, then restore my phone from my latest backup which was made with the most recent version of iOS 7. The restore on the phone worked fine to bring it back to factory settings, then I went to restore from my backup on my laptop and this seemed to be working fine as it had my text messages, emails, etc., but it only has 1.5 pages of app icons (half of which are blacked out) and my iTunes remains on Step 5 of 5 "Waiting for changes to be applied". After several hours, I cancelled this backup restore and attempted to do it again, but the same thing happens. Is it possible to have a corrupt Backup? and if so, what should I do?
Thanks.

Try this previous discussion:
"Waiting for changes to be applied": Apple Support Communities

When syncing after recent update, sync is stuck at "Step 4 of 4" "Waiting for changes to be applied" and will not complete, even after hours. How can this be fixed?

I completed the most recent software update for both iTunes and iPhone recently. I am now trying to sync my iPhone to add newly purchased audiobooks and the sync remains stuck at "Step 4 of 4" with the message "Waiting for changes to be applied" I have tried everything to correct this. When sync is cancelled a failure to sync message is generated. Any ideas????

Alright, so I reset my computer and suddenly it then recovered. Other times it wouldn't recover after resetting the computer, so I have no idea how it happened. I just restarted the computer lots of time and finally it worked.
Okay, back to square one. Now to transfer music, I tried my previous acknowledgable solutions but they didn't work. The iPod touch does not feature a hard-disk mode, and windows media player doesn't support iPods.
I've tried multiple programs to transfer music but none of them work properly and keep giving me error codes. So my iPod still gets stuck at Step 4: Waiting for changes to be applied or whatever it said.
Thanks in advance ._. (Please help)
p.s - Apple is useless. If I don't get steady answers tomorrow I'm going to end up calling them and get this problem fixed first hand. Second hand? I don't know, over the **** phone.
juiceb0xk signing out for the night. Bye. >:(

I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

Have you tried doing a Restore?
For some problems the solution is to download & reinstall iTunes.
 Cheers, Tom

My iphone doesn't want to finish syncing in my laptop it just says step 6 of 6 waiting for changes to be applied

My iPhone 5 doesn't want to finish syncing in itunes it just keep saying step 6 of 6 waiting for changes to be applied and I have tried like thousand times...

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

ITunes won't sync with my iPhone 4! Won't get past 'Waiting for changes to be applied'

I've recently started having a problem with syncing my iPhone 4 (running the latest version of iOS7) with the latest version of iTunes.
I start to sync my phone with iTunes but it gets to the 'Waiting for changes to be applied' phase and then doesn't finish it's sync correctly after that. It won't tell me that the sync has failed, it'll just replace the 'Waiting for changes to be applied' with the Apple logo in the top bar on iTunes.
And now, rather randomly, all songs ripped onto iTunes from discs with artists starting with the letters R-Z are dislayed in the library on my phone but the phone will fail to find them, and subsequently play them, if selected.
Does anyone have even the slightest idea what has gone wrong with iTunes or my iPhone 4?

Cancel the sync if you haven't done so already. Quit iTunes, reboot your computer, reboot the iPad and try again. This won't hurt either...close all apps on the iPad before you try syncing again.
In order to close all apps .... Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Quit iTunes and reboot the computer, now try again.

Strategies for Changing Velocity

Similar Messages

Maybe you are looking for