Strategy and settings to move 17 videos to Encore
Hello
I have 17 small videos ranging from 2:30 - 4:30 adding up to a total of about 60 minutes
I used the presets in the image below and the total amount of space taken on DVD was only around 2.3 GB
When i played the video the scenes looked great but the minute the camera zoomed in or moved i got lots of movement
with the pixels. I also have lots of special effects which again look great except when the camera is moving or zooming
I am wondering what adjustments i can make to slow or eliminate the jitter or pixelation look. I am willing to use the remaining space on the dvd to increase quality
but dont want to over due it as i seem to remember putting the quality too high and it not playing on some DVD players
Thanks for any input :-)
For chapter issues related to your navigation question in the Encore forum, place chapter markers at the audio begin point so you have a gop header where you want the chapter marker.
Similar Messages
-
The only icons that come up are computers and settings no movies tv etc
the only icons that come up are computers and settings, no movies tv etc. I have disconnected the device and one box nothing I have tied has corrected this problem please advise, I am so frustrated second day attempting to correct this.
The Settings > General > Software Update option only appears when you have iOS 5+ installed, as your tagline says that you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 1 will be updated to iOS 5.1.1, and iPad 2 and 3 to iOS 6.1.2. -
With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?
Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR -
How to move Documents and Settings and All Libraries To D drive to separate from the OS
I want to move my Documents and settings Folder to D drive so I can back up the OS separate from Data or at least move Libraries to D drive. I have partitioned my hard drive so that most of the space is on D drive and about 100G is on C drive. I can't understand why the old My Documents file structure was changed where now it is called Libraries and My Documents is a sub folder to that and My Music, My Picture etc are not in My Documents anymore. Let’s just randomly shuffle directories to enhance the Window 7 experience. If you have not already figured out I am an XP user. I know there is a way to do what I want to do because virtually all corporate systems are setup this way.
Oh how the heck to I get access to Documents and Settings? Well sometimes programs hide stuff there. Like why does Zune software hide your album art in documents and settings that you spent hours downloading and fixing so that when you move my music that all your album art does not go with it.
PerryHi,
In Windows Vista and Windows 7, the “My Documents and Settings“, has been replaced by "Users". The My Documents, My Music, My Pictures, and
My Videos folders in Windows XP are transferred to the following folders in Windows 7:
%systemdrive%\Users\user_name\Documents
%systemdrive%\Users\user_name\Music
%systemdrive%\Users\user_name\Pictures
%systemdrive%\Users\user_name\Videos
You can find your user files in the above folders and move them to the drive you like.
For more information, please refer to
http://support.microsoft.com/kb/930128
http://support.microsoft.com/kb/930890
It applies to Windows 7.
Hope it helps.
Vivian Xing - MSFT
When I visit the two quoted knowledge base links from Windows 7 I get -
System TipThis article applies to a different version of Windows than the one you are using. Content in this article may not be relevant to you.Visit the Windows 7 Solution
Center
In other words your reply does not apply to Windows 7.
Do you please have an answer which does apply to Windows 7?
Cheers,
Brian Towers -
How do I move my iMail accounts and settings to a new mac?
How do I move my iMail accounts and settings to a new mac when both machines are running Mountain Lion?
On the destination Mac, I have two mail accounts that I want to keep, so essentially I will be adding another 4 accounts (from source mac) to the exting 2 accounts (on destination mac). How can this be done?If the request above is too difficult (no replies??), then can someone help me with moving my mail & settings between the two Mountain Lion machines (the 3 mail accounts from the source machine to be moved to the new mac - the 2 mail accounts on the new Mac can be trashed if required - simple move from one machine to another)? Is that easier??
-
I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?
Did you download it using iTunes for Windows, or did you download it directly to an iOS device?
If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App -
Writing video to dodgy "Document and Settings" folder
Minor problem that I've come across when generating video using JMF:
On Windows, if the output location is in the users home directory, the video gets written to a copy of that directory with spaces replaced by % characters!
e.g.
C:\Documents and Settings\me\Desktop\Documents%20and%20Settings\meMy%20Documents\My%20Videos
The target URL is selected from a file chooser and looks fine before it's passed to the MediaLocator.
What's going on?StrideColossus wrote:
captfoss wrote:
URLs, by default, replace spaces with '%20'. Common knowledge, moving on.Really! Never come across that, and neither has anyone else on the team (or at least not for files anyway).Yep. [RFC 1738|http://www.ietf.org/rfc/rfc1738.txt] defines spaces as unsafe characters, and mandates that all unsafe characters be encoded using the % octet encoding scheme.
Anyway, no I'm not explicitly prefixing the protocol, instead just using file.toURI().toURL().
Dumping the URL shows that the protocol is correct, e.g. file:/C:/yadayada.avi on WindowsRather than doing that, because file.toURI().toURL() should result in replacing spaces with %20, I'd recommend trying the following...
MediaLocator ml = new MediaLocator("file:/"+file.getCanonicalPath()); -
Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?
Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD -
iMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 . I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies. How do I fix this?
Hi Michael,
I'm glad iTunes is working now! If you want to locate iTunes plug-ins on your computer, you can find them in the following locations (you may not have the iTunes Plug-ins folder if you do not have plug-ins):
Mac:
/Users/username/Library/iTunes/iTunes Plug-ins/
/Library/iTunes/iTunes Plug-ins/
One thing I also wanted to mention is that the "Users/username/Library" is hidden in Lion and Mountain Lion. You can access it using these steps:
OS X Mountain Lion: What is the Library folder?
The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
You can find the full article here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
All the best,
Sheila M. -
How do I move bookmarks, cookies, history and settings from an old Firefox version to my new one
I have the previous version of my Firefox from an old computer now located on my C drive. I would like to move the bookmarks, cookies, history and settings to my new Firefox (it is an upgraded version on my new computer). When I click on the File drop down, the import section can not be opened because it is not active. I have dozens of bookmarks that I would like to have loaded in my new Firefox application. I would also like to have my passwords moved to the new Foxfire application. How do I get that to happen?
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
-
i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.
Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore. -
I had all my old home video's and super 8 movies converted to DVD's. Since I will move back to Europe I asked the company to convert them to PAl system. I just got all the DVD's for a lot of money, but I can not play any of them on my MAC book.(I think that is because they were burned on zone 1 dvd's and my lap top works with zone 2.
I wonder how I can make them work on my macbook..? I intended to start editing those movies so I need to be able to play them on my mac. Is there a way to copy them to zone 2 DVD's and or to zone 0 dvd's and where do I get those free zone or zone 1 recordable dvd's?
ireen 1 min agoWelcome to the Apple Community.
The Apple TV 2 will play all the content in your iTunes library that your Apple TV 1 does. It can no longer sync any of it but can stream it all just as the older model did. Airplay is a different feature that lets you stream from an iPad/iPhone, the Apple TV 2 has Airplay the first didn't.
You can still sort and search content by genre, it still marks content watched and unwatched and mainly still lets you organise much as the Apple TV 1 did, with one exception. It doesn't do nested folders, so the ability to tag a movie as a show (ie James Bond) and have all the associated movies in a James bond folder has gone and it lists all these movies individually.
It has a similar situation with TV shows. It will put all TV shows in a series in a folder as the older one did, but the new one lists each series separately whereas the older model would put all the series in one folder.
Not nesting folders is a bit of a pain with large libraries and whilst I don't like it, it's more or less the only compromise I have to make and of course I get additional features too. -
I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.
The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether. -
I have just connected my new apple TV and in the main menu see only two icons: computers and settings. How do I access the rest of the icons (internet, movies etc...) We do not live in the US. The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.
Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
Reading through the threads my take is
There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
Power off, reset and factory restore doesnt seem to solve it
Occasionally its nearby antenna cables etc causing interference
One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
Plugging in ethernet works, this is purely a wifi issue
Sometimes plugging in ethernet temporararily wakes up the wifi
Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.
Maybe you are looking for
-
Issue in Quantity " Actual" Quantity of a Planned Service - In serviceentry
Dear All, I am have one issue client created the PO for service for 700 EA Qty price is 10 so Total =7000.00 Then he already made service entry for 300 qty . now in PO open Qty is 400. now he is trying to make service entry for pending Qty 400 but
-
Pleeeeeeaaaaaaseeeeeee Help! I have a flash movie which is taller than the browser window, but rather than it being scrolled by the browsers default scrollbar I want to create a scrollbar swf file which will control the scrolling of the movie within
-
DNS Packet Filtering Within BM3.9
Hi I hope you can help - now i think i know the answer to this (No!), but i really need some functionality within ZCM10 working ok for patches. See :- here But as we use BM3.9 which does not allow DNS filtering am i to understand its not possible to
-
Webblogic 10.3.3 automatically shuts down on OFM Configuration :
I am confuguring OFM 11.1.1.2.0 on Weblogic 10.3.3 on Windows Server 2003. However while Confuguring the Oracle Identity Manager Components, it fails while creating the Oracle HTTP Server. It says that it cannot connect to the Admin Server. At this p
-
Re: disabled ipad due to my own mistake on placing a second passcode on restrictions under general.this got myself locked for a near month now.i got my ipad with retina display for a present from Family just recently,january 19,2013.i then got to dow