Strategy based inspection for bridges

Hi Guys,
I have a scenario to map for Bridges inspection on my current project
The scenario is...
We have a bridge 'A' that undergoes two levels of inspection Level 1 and Level 2. The frequency for 'L1' is Annual and for L2 every 5 years. L1 is a visual inspection and L2 is a detailed inspection. Whenever we have L2 inspections there should be no L1 inspection scheduled.
I have mapped the scenarios as follows
1) Created and equipment for the Bridge
2) Created a equipment tasklist - with two group counters - counter '1' for Level 1 counter '2' for Level 2.
However i can't understand how to avoid Level 1 inpsections when there is a  'L2' inspection. This sounds to me like a strategy based inspection but not quite sure how to map it?
Thanks,
Sravan

Greetings Sravan,
I agree with Maheswaran KD .,it looks like the use of Offsets is the best for you. As you want to schedule the plans at different dates, that are not offset by exactly 1 year from one another, you need to create 2 Plans.
A word of caution is that the Plans can't "talk" to one another (unless you created some enhancement), but you can align the maintenance date with your requirement through a resourceful use of offsets:
Create 5 Packages, each with 60 Months cycle and an Offset multiple of 12.
Assign the Packages 1,2,3,4 in your Visual Inspection plan & Package 5 in your Detailed Inspection plan.
Yoiu may specify different start dates, which should be your last inspection date for each level.
Be aware that if you should need to reschedule the Maintenance Plans, you have to do this for both of them independently.

Similar Messages

  • Release strategy based on costcentre for PR

    Hi Experts
    I want to add Cost Centre as my release criteria in the existing release strategy . Presently I have Purchase grp and amount as my release criteria . Pls advise me how to proceed on this . Kindly also let me know how the user can be mapped to cost centres for approval as the user wants to have different approvers for different cost centres. We have searched for the authorisation obj for cost centre but could not get mor information .Pls help .
    Thanks
    Edited by: Devashish  Lenka on Sep 6, 2010 2:10 PM

    Hi,
    Option-1:
    You can create release characteristics with field KOSTL and add this characteristic with release class with other release characteristics. And you can design your release strategy based on requirement & then limit the cost center via authorization object K_REPO_CCA
    Option-2:
    Create Purchasing Group (OME4) as Department & assign the department to Cost center(KS02/KS01). Now create purchasing group as release characteristics with field EKGRP add this characteristic with release class with other release characteristics. And now you can design your release strategy based on requirement.
    Regards,
    Biju K

  • My client want to create realease strategy based on plant for PO

    Hi all,
    1.My clients want to create realease strategy based on plant for PO. Kinldy let me know the the possibilites and steps.If it is not possible let me know the reason so that I can explain to the client
    2.how can I take print of credit note and MIRO kindly let me know  T,code.
    hope to hear back from you all....
    Thanks&Regards,
    chand

    Hi chandysrm ,
    You can creatye Release strategy for plant specfic.
    Create charetestic (CT04) for plant : CEKKO-WERKS.
    Assign with Class (CL02) --032
    Create Rel. Group , Rel. Code & Rel. Strategy.
    create rel. strategy for each different plant.
    In classification view give the plant code.
    [http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE]
    [PO Release Resetting after Value Reduction;
    [Separate release procedure for PO and PO under contract]
    [release procedure for contract]
    [release procedure for contract]
    Credit note print out : MR90.
    SAM
    Edited by: Saminathan Gopalan on Jun 9, 2010 10:39 AM

  • Issue of Quality Inspection for consignment return delivery

    Hello,
    I am doing a returns delivery(from a Sales Order) from a Customer Consignment.
    I am getting a error when I do a Post Goods Receipt(PGI). QM is active for that material.
    The error I am getting is
    "Change the inspection stock of material XXX in QM only"
    Procedure says
    "Check both the QM inspection setup data and the movement type for material XXX in the quality management view of the material master"
    The movement type used in the returns delivery is 655(GD returns for QI).
    What is the solution for this error. Do I need to change/add new Inspection type based on the Movement type?
    Please let me know ASAP.
    Thanks
    Regards
    SAP Fan..

    Hi,
    You can read this link for inspection for customer return [Inspection for customer return|http://help.sap.com/saphelp_47x200/helpdata/en/92/b808b1d52a11d2962200a0c930e04c/frameset.htm]
    It looks the material master is set-up inspection type with 06 - returns from customer. Also the movement type 655 moves the goods into QI stock.  In this case, the Quality personnel needs to change the inspection stock type using transaction code QA32. They will change the usage decision on the customer returns.
    Once the change the inspection type is changed, you can do the post goods receipt.
    Regards

  • Purchase order release strategy based on over delivery tolerance level

    Hi Boss,
    I like to set the Purchase order release strategy based on the over delivery tolerance. But when i checking, the over delivery tolerance filed UEBTO is not in the communication structure CEKKO. Can you please help me how should i extend the CEKKO with field UEBTO.
    I do not have the ABAP experience, please guide me with coding.
    Thank you,
    Siva

    Hi Siva:
    You should request the development key for this structure under your SAP system, then you can add the extra fields in CEKKO.
    Good luck
    Z.T

  • Payload based sync/async bridge

    This is my scenario: ABAP -> XI -> MQ -> XI -> ABAP
    I want to use the message content to be the correlation key, it means ABAP sends a message with order no.="ORDER1" to MQ and MQ will reply a message contains order no.="ORDER1". Then XI will use this message from MQ to reply to the sync ABAP program. Is it possible ?
    I read this document "How-to Correlate JMS 1.20" to build a sync/async bridge (XI is 3.0 SP17)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
    First, I followed 3.1 to build a "header based" sync/async bridge. It's ok, I can see a message id in the field "JMSCorrelationID" in MQ tool. (I didn't test reply). And then I checked 3.4 in the document and want to build a "payload based".
    There are only 2 steps in this document
    1. I modified the correlation to the order no. field of request message in the send step.
    2. I modified the correlation to the order no. field of reply message in the correlation editor.
    Is it ok ? Because when I ran the ABAP program again, I still see the same JMSCorrelationID in MQ?

    Thanks, so, the correlation id is encoded. I think I can see "ORDER1" originally. I changed it to "ORDER2" and see another correlation id and I changed it back to "ORDER1" and I see the original correlation id. I think the configuration of ABAP -> XI -> MQ should be correct now.
    Now my problem is MQ -> XI -> ABAP. I manually put a message with order no.="ORDER1" in the reply queue. XI got it, but show the error message in workbench. 
    "XI inbound processing failed for message at 2007-03-28|18:15:22.464+0800. JMS and XI identifiers for message are ID:414d51204d495453303153305420202045a35b480003f722 and 3cf8ed80-dd15-11db-a560-0017a47618a6 respectively. JMS adapter will rollback database and JMS session transactions"
    Both of the messages are not the encoded "ORDER1" and when I press refresh in workbench, the 2nd id in the error message is always changed. Is there any suggestion for it ? thanks.

  • PO release strategy based on effective price

    Hi
    We have PO release strategy based on net order value.
    If we make the release strategy based on effective price then what would be the impact? What r the risk factor involved?
    Regards
    sapmm1234

    Hi,
    Net order value is known ie we give value for the characteristicex: RS.100000 or 1 crore etc, but  effective price is unknown how can we mention that a charactristic value? I dont understand
    Regards

  • PO release strategy based on Material Group (CEKKO - MAKTL)

    Hi Experts,
    I have configure the Rel strategy based CEKKO-MATKL (material group) for purchase order, but when i raise the PO Rel strategy is not affecting, Can any body tell me why.
    Regards,
    Kumar

    You can set Release strategy based on Material group & other Line item specific fields..
    You better follow a suitable and hinder less process..
    For PR use Material group & Account Assignment based Release process..
    then for PO use a Release Process based on Header level fields like Doc type, Amount, pur Group etc..
    So that the approved PR line can be converted into PR and then the PO also subjected to Release before sending it to External Vendor..
    Even if you want you can make that the PO can not be created without referencing PR for SOme users or All users..
    based on your business requirement..

  • Strategy in task list and Strategy based Maintenance Plan

    Dear Gurus,
    I have some doubt about
    is it same if we create a single cycle plan with a task list in which maintenance strategy let say A is being used and a maintenance plan strategy based let say A and task list without any strategy
    can some one explain use of strategy in task list and maintenance plan
    Regards
    Armaan

    Hi,
         In Strategy Based Plans :- When ur entering strategy in initial screen of IP42 then inside the plan system will allow u to select tasklists created with that strategy only ...
    In Single Cycle Plans :-  Here even though if u select tasklist of a particular strategy , system copies all the operations of the tasklist to the order...
    From your above example :- Single Cycle Plan if cycle is monthly is equal to strategy based plan having only 1Month package .
    further package in strategy allows u to select which operations of tasklist u want for 1Month..
    regrds
    pushpa

  • Yearly once inspection for specific characteristic with out inspec. lot

    Hi Experts,
                        My client want some specific characteristic inspection yearly once with out inspection lot.
    help me how to map this scenario
    Regards,
    Sbabu
    Edited by: sbabu babu on Apr 22, 2010 12:27 PM

    I dont think any standard solution for this,
    few suggestions are
    Go for a manual lot, client can track manual lot generation based on a report. report can be ABAP deveoped based on the client requirements. So every day client can run report and know which all materials are to be inspected on that day. I feel this as best.
    DMR may have an issue as unnecessarily lot will get generated throughout the year in system. Its OK, we can do auto UD and all, but think do we really need these data go into system for rest 364 days for that one day inspection. If you ask me, I will say no to it.
    Calibration lots can be generated only for equipments. Its only fixed time based inspection lot. But here material need to be maintained as equipment. i dont think, this is acceptable. Try first one which worked out well for me. Jus a report for tracking.
    Thanks
    Vineeth Varghese

  • Please do you plan to produce T series of notebook with 15,6 display based on Sandy Bridge?

    Please tell me do you plan to produce T series of notebook with 15,6 inches display based on Sandy Bridge processors? Please write soon. I am looking forward to your answer. Tnank you in advance
    Solved!
    Go to Solution.

    pdzodic wrote:
    But I posted the question on this forum in order to gain official information.
    This is a peer to peer support forum for Lenovo users, not an official information channel, so your expectation was misplaced.
    Cheers,
    Bill B.
    I don't work for Lenovo

  • Batch search strategy based on goods receipt date

    Hello,
    Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
    Thanks a lot
    Thanks!
    Best Regards
    Srw

    Hi
    If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type  023
    Then assign this class in Material Master Classification view..
    Make sure in Material master, Purchasing view...you have activated Batch management active check box....
    Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
    Then Create sort sequence in  T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
    And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
    Now  you do your regular procedings.....the material Batch will be searched based on GR Date...
    Reward if useful
    Regards
    S.Baskaran

  • To build web based application for taking backup

    Actually , I have prepared menu based scripts for taking backup.
    Now what i want to make is WEB BASED APPLICAATION for taking backup. My idea is to build the Web Pages which will call the scripts which i have already buit . But I don't know how through Web Pages I am able to go in the server and call the scripts .
    If anybody having any idea regarding this . Pls guide me I am very thankful to him/her.
    Thanx
    Waiting for valuable advice

    Dear Sandeep Saini,
    You may develop the web application is used SDK DI Server.
    Please refer to SDK help and sample for more information about DI Server.
    Best Regards
    Jane Jing
    SAP Business One Forum team

  • PO Release Strategy not triggerred for particular Total Net Order Value

    Dear,
    I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
    For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
    All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
    But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
    Please suggest for solution.
    Thank you.
    Warm Regards.

    Dear All,
    While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
    But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
    May I know how the value for this field gets calculated.
    Thank you.
    Warm Regards.

  • Is there a way to create my own web gallery template for bridge?

    Is there a way to create my own web gallery template for bridge?
    I want to add custom data that is not in any of the templates.
    Pretty much, I'd like to create one from scratch...

    This was discontinuted in CS5 howerver you could migrate that plugin to CS5.  I don`t know if you can do this with CS6.
    To my knowledge they only provided a revised Contact sheet II script for CS6. In my opinion a very bad idea because they should have put all efforts and resources to enhance the Output Module PDF contact sheet that has far more options.
    Still not using web galleries but the goal for web gallery was also to use this in the Adobe Output Module, maybe that provides you the options you want?

Maybe you are looking for