STRDN1050 - how to play DSD over DLNA?

the documentation of the STR DN1050 states that DSD can be played over DLNA.I can't figure out how to make this work.The same DSD64 files play fine from a USB storage plugged to the receiver directly. What software on my computer do I need to make the DSD encoded properly so the receiver accepts to play something?I have tried Minimserver, Plex and JRiver without success.I use Mac OS X. Thanks for any insight

Hello mimizone, thank you for your message.
Supported format ( STRDN1050)
DSD: 2.8 MHz, 1 bit DSD
By setting up your computer as a Digital Living Network Alliance® (DLNA) server, you can stream media, such as music, photos or video, over your network to a DLNA-supported device. DLNA devices include certain TVs, Blu-ray Disc™ (BD) players, HiFi component systems and computers. Once the DLNA server and device are set up and connected properly, the device can access media from the iTunes® application and iPhoto® libraries, as well as other locations on the computer. Follow the procedure below to set up the Serviio software:
IMPORTANT:
The Serviio software is available on the serviio website.
The computer and the DLNA device must be connected to the same network for this procedure to work.
If you are using third-party firewall or security software, you may have to configure it to allow network access for the serviio software.
Click the System Preferences icon in the dock.
In the System Preferences window, under Other, click Serviio.
In the Devices: section, verify your DLNA device is showing, enabled and has an IP address.
NOTE: If your DLNA device is not showing or does not list an IP address, verify it is set up and connected properly per the manufacturer's instructions.
For more information about the servio software, consult the operating instructions or visit the Serviio support website.
If this post helps you to resolve your concern, please let us know by accepting this post as a solution.

Similar Messages

How to play Mozaic over car radio speaker system without static?

Playing Zen Mozaic over Car?s Radio Speaker system without static?
I just purchased a Zen Mozaic and want to use it primarily for playing books downloaded from the local library over our car?s radio speaker system without static.
I purchased a cheap audio cable to connect the zen to the AUX interface in the car but I understand that trying to play it over the car runs into the problem of bad static.
Is there some device that will allow me to play the Mozaic over the car radio system without static?
Thanks very much.
Bruce? [email protected]

D? Are you simply plugging a jack from the headphone output on the Zen into a headphone-like input on your stereo? That sould work fine, with possibly only slight "whine". If you are wiring into the back of your stereo, it should work just as well unless you have poorly shielded cables or your car has crummy sparkplugs. Do a Google search on this---what you are doing in case 2 is common on motorcycles and they will tell you how to use a resistor circuit to cut down on ignition interference.
You can also either use a cassette adapter (if your stereo has a cassette player) or an FM transmitter (many varieties of these). The FM transmitter works well, but you'll pick up static and interference if you dri've into an area where an actual FM station is using that frequency. You just have to "change channels" on your radio and transmitter in this case---simple. The sound is pretty good (not as good as direct cable or cassette adapter) and is more than adequate for books.

How to play music over bluetooth on iPhone 3G

I have an iphone 3g and i have a plantronics voyager pro bluetooth, is there any way i can listen to my music either thru itunes or pandora box via bluetooth instead of using my earphone headset?? do i need the latest software or what? thanks

If you want a single earpiece that supports hands free calling as well as A2DP music, look at Jabra. Their BT530 (current model) and BT8040 (older model, but still available someplaces online) are regular single ear earpieces that support A2DP as well as. I have both and either works very well with my iPhone 3GS, although the newer BT530 has better volume (but actually does not fit quite as nicely in my ear as the older BT8040).
http://www.jabra.com/Sites/Jabra/NA-Us/Headsets/Pages/JabraBT530.aspx?productfam ilytab=Overview

How to play YouTube videos in HD on iPhone over cellular?

Does anyone know how to play YouTube videos using the Google YouTube app in HD on the iPhone over cellular? I'm asking because I have an iPhone 5 with a large LTE data plan, which I don't mind using a bit more data for better clearity on the videos. I know in the past people have suggested to use YouTube in the Safari broswer to view videos in HD, but I find it to be non-consistant. Anyone have a better idea how to watch YouTube videos in HD on iPhone/iPad over cellular (3G/LTE)?

Did you use iAD to create the widget? If you did... then there support group should have answers.
If you used one of the widgets in iBA - as you have had no suggestion for a fix... you will need to contact iBooks support.
The More Like This column on the right shows links to similar problems.
It would seem to be related to your use of You Tube and Vimeo content or maybe its how you put the widget content together.
Have you search the iBA help files, previous posts and the iBA tips?

How to play Netflix on my Imac G5, it has Safari and Firefox 3, and over 1gb Ram and Mac OS X 10.4.11

How to play Netflix on my Imac G5, it has Safari and Firefox 3, and over 1gb Ram and Mac OS X 10.4.11

You referenced that you had a iMac G5 model?
G5's are PowerPC CPUs and not Intel CPUs.
The Microsoft Silverlight software works with Intel chip Macs only.
And, if I am not mistaken, the software requires OS X 10.5.8 Leopard or greater to install.
So, you need both an Intel Mac with, at least, OS X 10.5.8 as minimum requirements.
Netflix will still not work on your Mac.
FYI.

How to play multiple CDs from Music list

This may sound really dumb, but I can't figure out how to play multiple albums in the latest iTunes. I have to drag them over to a Playlist then check all the individual songs. Is there a way to gang up multiple albums and get them onto Up Next by just selecting from Music? Sometimes only the first song will play when I double click an album. This would be similar to playing three CDs from your home stereo, for instance. Can this simple task be performed from ITunes, please??

Basically right click the artits in that left column and select Add to Up Next.
You can also select individual albums by right clicking the album cover a little to the right and choosing the same option.

New update how to play music on apple tv

I just updated my iPhone 4 and now can't figure out how to play music or videos on my apple tv

iPhone 4 can AirPlay audio just fine, I'd forgotten that it can't do screen mirroring. It's been so long since I had my iPhone 4 but I'm certain that some apps will allow video output over AirPlay (which is not the same as screen mirroring). The stock iOS Photo and Video apps could stream pictures and video to ATV, but true mirroring of everything you see on the screen is not supported on iPhone 4. It isn't iOS 7 that took away this capability, it is a capability that has always been limited with iPhone 4 (and earlier).
If you are sure that your old 3G can output video over AirPlay, which specific apps? Those same apps should work on the iPhone 4, even with iOS 7.

How to play infinite sound

hi,
how to play an (invisble) flashmovie containing a soundloop
over several html-pages? (I use flash8 professional and I'm able to
use script )
thanks for any hints
kesel2

thanks Rafiq Elmansy,
i found a solution which works fine and wasn't such much work
to do, i thought before...
the first call goes to a frameset, where one frame is filled
with the startpage and the other frame (just 1row and color to
background #fff, so it's not visible - don't set the visibility to
hidden, then you get no sound too!).
into the second frame i put the .swf file (width and heigth
=1 px), with the looped sound, which now playes in all pages and
even in the pageloading times...
if nesseccary you could also add buttons to controll the
sound, but they are outside the main window (frame 1) of your site.
bye
rainer kesel
kesel2

Using airport disc as a music server, and playing music over airtunes

I know that I can put my itunes library on an external hard drive, and that I could access this external hard drive wirelessly if I attached it to an airport extreme. However, if i did this would I still be able to play music over airtunes. It seems that the music would have to be sent wirelessly from the drive to my macbook via the airport extreme, and then from there to the airport express and on to my amplifier. This seems convoluted. Would it work?

I think you are missing the point.
1) It is fast enough. I've never had a problem doing anything I needed to. Also, there is nothing preventing you from hooking directly to the external hard drive for extended data transfers. And unless there is a serious problem, the wireless connection is faster than any burning speed. And it isn't wireless internet. The internet has nothing to do with this. 802.11n has typical throughput speeds of 70-80Mbps. That is a song a second or better.
2) Actually, what gets kept on the shared volume is only the music. The library file, the artwork for albums and everything directly related to how iTunes understands the library remains on the internal drive under the user directory.
3) This is true, but as soon as it regains contact everything is corrected. What is really nice, almost as if Apple intended for it to be so, is that any new songs brought into the library while contact is lost to the Airdisk can be consolidated by simply using the menu item ...consolidate library.
4) Not close. If I gave up the hard drive space it takes to hold my music/video library on my internal hard drive I wouldn't have any space left. I'm thinking you interpreted the situation as referring to someone with a desktop computer. I think in that case, that unique case of a single desktop Mac household, then yes, of course, plug the external drive into the computer. In the other cases, where there are laptops involved, and more than one user, this is part of the beauty of the design of the whole system.
I suggest to you that your response is a very closed view of the possibilities that are possible. You may not see the benefits, but it is by no means pointless.

How to play .avi on Atv2

How to play media files using Atv2 without using itunes?

iTunes is required to stream local content on the network to AppleTV, unless you are using 'Airplay' to send video from an iPhone/iPad etc to AppleTV2 from a compatible app.
AppleTV2 as shipped is unable to access NAS devices or DLNA servers. There are unofficial hacks out there but they cannot be discussed here and would not lead to a stable solution as changes in AppleTv software would often render them non/poorly functional.
AppleTV2 requires h264 video files with specific encoding.
If you have .avi files, try downloading the free Handvbrake video converter to changethem to h264 using the AppleTV2 preset then add to itunes - this will be time consuming however, more for longer/higher resolution video. Try Subler for editing metadata on your movie files or change using Get Info on a file in iTunes.
Good luck.
AC

How to play Audible books in Nokia 5310 ?

I have downloaded the books from Audible.com, and transferred it to the 5310. Also, an appliaction from Audible.com is also installed in my phone, I think the application is called Audible Air.
However, when I try to run this application, the phone pop up a message:"Certificate not on phone or SIM".
Anyone know how to play the Audible books in the Nokia 5310?
Is it necessary to connecto the phone to the internet?
Thank you very much

I'd be interested to know how you get around this problem. When I go over the air to install I just get 'certificate not on device or SIM'.
Any ideas?

Can't browse internet while playing music over Airport Express

Hello,
I have a 802.11n wireless network using a D-Link DIR-615 router. I have 2 AX's, one for the printer and one recently purchased to play music on my home stereo. The AX's are set to join the existing network.
I can play music over the AX just fine, and I can browse the internet wirelessly just fine.... but...
When I am playing music AND want to browse at the same time, I can do so for about a minute, at which point the internet stops working (I get time-outs) and a couple minutes later, the music also stops. To fix it, I have to turn off AirPort on my MacBook Pro (using the icon in the upper right of the screen), and then turn it back on.
Why is this happening? How do I fix it? I've tried changing the channel on the router. I suspect it's something to do with the router... but Apple folks are so much more helpful!

Based on the information in your posts, you are likely encountering a signal strength issue, an interference issue with another wireless network or device, or a combination of the two.
iStumbler will help with identifying one or both of these potential issues.
When you open the application, check your signal strength. If you have a "good" signal, your wireless signal strength will appear in green. If it's yellow, you have a marginal signal, red, etc. If your signal is not in the green area, you need to position the router and Express closer together or try to eliminate any obstructions between devices as much as possible. A typical sheet rock and stud wall will on average, absorb about 15-20% of your signal.
Then look for other wireless networks that may be displayed in the iStumbler window. Any visible network that is using the same channel or a close adjacent channel as your wireless is a likely cause of interference. If you see this, change the channel on your router to see if you can find better airspace.
You may need to experiment with this a bit, as most modern routers allow a user to "hide" their network. So, it's quite possible that another network that you cannot see is interfering with your signal. All you can really do is keep trying different channels until you find a better setting or run out of channels.

How can play 3D movies on a screen using MacBookPro and Apple TV?

If I Have a stored 3D movies on an external hard drive, how can play it using my MacBookPro?

I haven't heard of any 3D consumer level video cameras, so the content must be produced commercially, is copyrighted and most likely has been copy protected/cracked/P2Ped and now your asking us how to play it back on your Mac/AppleTV in violation of this sites rules of conduct with easily established id's and IP addresses where the stolen content can be found.
This is a open forum, the results of these posts are almost immediately indexed by Google's spiders, making it incredibly easy for the MIAA to find your post, which they then can send a supoena to Apple for your IP address, then to your ISP for your exact name and address, compare your IP to those they record P2P-ing online.
I can't say if Apple will cooperate with the MIAA or not, they do sell movie content thus the MIAA does have some leverage, Apple could ask the MIAA not to disclose their involvement in locating you, the MIAA could lie and say they saw you P2P-ing the content.
If your scared, that's good, it's a heck of a lot less expensive than a lawsuit over some stupid free movies.

Playing audio over two sliides

I am trying to play audio over two slides. I basically want
it to loop over the two slides and then stop. It won't work for a
project because I don't want it to play the entire time. I tried
doing it for the two slides, but there is no looping option when I
am in the editing audio window.
Can someone help me out?

Hi uridiscence
In order to do this, you will need to edit the audio and
create a single clip that is timed to span the two slides. So for
starters, I'd examine the timing to determine exactly how long the
clip should be. Then edit the clip and copy/paste to create a clip
exactly that length. Then insert the clip on the first slide. You
should then see an option advising of a mismatch between audio
timing and slide timing. You will want to choose the bottom option.
Cheers... Rick

How do I start over with my mac book pro

I used disk utility and found my hard drive to be corrupt. How do I start over and clean this up?

Backup your Users data off the computer to regular storage drive (not TimeMachine), hold c boot off the 10.6 and use Disk Utility to Erase with Zero the entire drive of everything, this will map off any bad sectors and if you have enough spares, the drive shoudl work fine again.
Reinstall OS X, setup with the same user name, Software Update until clear, install your programs from fresh sources and return files from the storage drive, don't use TM to restore it's also corrupted image, just have to start all over again.
Read more, especially the section about bad sectors
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/docs/DOC-3045
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/docs/DOC-3172
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

STRDN1050 - how to play DSD over DLNA?

Similar Messages

Maybe you are looking for