Streaks through pictures

My L7780 has started leaving lines through my pictures and drawings. It only does this in normal print quality. It prints fine in best setting. Anyone know why it would have just started this

Yes, I have followed all the procedures cleaned, realigned, etc

Similar Messages

  • When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour.   Can someone help?

    When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour.   Can someone help?
    This is happening even with photos that were taken on another camera, not just mine.  My daughter told me that the laptop recently fell.  The yellow streak is not anywhere else on the laptop, just on the photos in LR.

    I have had this problem on my desktop.  I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
    1. I do not import from camera or memory stick directly into LR.  I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
    2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number.  I suspect when I do less than 50 always works well every time.  However, I have also done some very large imports without issue.
    3. Error only occurs with my RAW images--for me that's NEF.  I have multiple cameras--those that only capture jpg images have never had an issue in LR.
    4. Even if the file is marked Read Only issues can still occur.  I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well.  I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
    5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
    6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
    7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
    What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs.  So, far I have not had process monitor actually running when it occurs--one of these days.

  • Scroll through pictures with 'gestures'

    Is there a hand 'gesture' that i can do to easily flip through my pictures when in an event or album?  I feel like i've tried all of the logical options, but so far, no such luck.  With all of the gestures available w/ lion, i'd be shocked if none were applicable to scrolling through pictures.
    Any ideas?

    Hi David,
    I am having the same problem. I have just installed Lion only to find out that the Std 2 finger swipe no longer worked in iphoto 7 so I upgraded to iphoto 9.5 (this is the recommended version to use with Lion) but I still have the same issues.
    If any one has any suggestions it would be appreciated.

  • In iMovie when I move my curser through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    In iMovie when I move my cursor through pictures in the project, I have an empty screen or it shows the first picture only..what might be the problem?

    Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097

  • Looking through pictures make iphoto take pauses every 3 or 4 picture,this started after update fro 4 of april.What is wrong??

    Hi..
    I have been using Iphoto and Aperture a few years.Both programs has been improoved several times during last years,but after update on 4 of april 2013 something changes in surch a negative way that fustration comes too surface too often. When I am out photographing,I will have too look through my pictures.When you have f.instance 200 pictures to view and program take pauses all the time,you get fed-up and dont get the job done.I hope Apple can improove program soon,My camera is a Nikon D800...Tom

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.
    btw A space between the full stop and the next sentence makes it easier to read.

  • How do I browse through pictures (in open state) using arrow keys

    Hi all. I know this is a lame question. But I am new to Mac. How do we navigate through photos in open mode. I mean usually in Windows, we open one picture and use arrow keys to navigate between photos.What are the keys I can use to navigate between photos. As of now, I have to close the photo and then double tap on another to view it. Thanks.

    What application are you using? In iPhoto you can just use the right and left arrow keys to browse photos...
    Clinton

  • Vertical streaks in pictures

    I bought an HP Photosmart plus B209a about a month ago and when I hooked it up (wireless) it printed a test picture and it was AMAZING. I went to print some pictures tonight and they have streaks in them. I went and bought new paper and cartridges (both HP brand) and they are still there. I dont know what to do it is soo irratating. Has anyone had this problem and what can I do to fix it? Thanks!

    The findings from your email shows that the issue is not caused by the cartridge or the printer. Since the streaks are appearing only while printing photos, I recommend that you use HP Advanced Photo paper.
    Next, under the Printer properties, ensure that the 'paper type' or 'print quality' setting is not set to 'Automatic'. Select the correct paper type and also select print quality as 'Best'.
    You can also try to print from a different application to see if there is an improvement.
    Say thanks by clicking the Thumbs up icon in the post
    Please mark reply as "Accept as Solution" if it solved the problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP

  • How can i flip through pictures using gestures in iPhone 2011

    In the previous version of iPhoto, I could flip through my pictures within Events using the same gesture I'd use in Safari to go back and forth.  Not sure if its the Mac OS Lion update or the iPhoto update to 2011, but I can't do that anymore.  Can anyone help?  Thanks
    Message was edited by: jesusfrombrooklyn

    What application are you using? In iPhoto you can just use the right and left arrow keys to browse photos...
    Clinton

  • Scrolling through pictures... or NOT

    Hi
    I have just installed my new iMac with Leopart and iLife08.
    I have restored all my pictures from a backup. When I looking at Events and dragging my mouse over an Event the pictures do not change. On my other MAC I can scroll through the pictures in a Event.
    But I can not find a option to enable or disable this feature?
    I hope someone know the answer ...
    BR Thomas

    BR Thomas
    Try trash the com.apple.iphoto.plist file from the home / library / preferences folder and restart iPhoto. Then reset your user options.
    Regards
    TD

  • HP L7780 Officejet Pro printer Column gridline through pictures.

    Have  L7780 Officejet Pro, all alignments and test pages show good as well as printheads, there are no error msgs. Yet when printing Word documents with pictures, there is a 3 inch long column with ruler grid lines through the pictures.  Using Windows Vista.  Please help

    Hello-
    I think it might be a setting in Word. Which version of Word are you using ?
    This is a photo with "artistic effects"
    Do the lines show up on print preview ??
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

  • Is anyone having issues with colored lines streaking through image of camera on ipad air?E

    Today when using the camera on ipad air the screen became filled with red green and blue streaking lines. When a photo and video was taken the lines were part of the recorded images. The problem is not evident if the cameras are switched and the camera on top is used. The ipad is only a week old having been given for Christmas. I have tried turning the device off as well as resetting it but no luck.

    Hi Eshylie,
    Thanks for visiting Apple Support Communities.
    If you see colored lines on pictures taken with the rear camera, and resetting the device didn't resolve it, I recommend backing up and restoring the iPad Air next:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Best,
    Jeremy

  • Scroll through pictures fast

    Hello - I am working on a slide show, and I would like to scroll through a set of pictures really fast! Besides cutting the pic to be as short as possible, which could take a lot of time with several pictures, isn't there a way to give a 'command' that will just scroll through them really quickly? I'm thinking it could be in the Time Remap section, but can't figure it out. It seems to be the same kind of effect that magazine shows use, like Entertainment Tonight/Access Hollywood. Ok, thanks very much!

    I'm not sure if this would apply to what you're doing, but you can set the duration of still frames in user preferences, which will affect any still frames imported afterwards; you could set this to as little as 1 frame, and then import your stills.

  • How to advance through pictures in a folder ?

    Hello,
    Don't know whether this is the right forum or not but hopefully question is
    simple enough that everyone but me knows the answer.
    I would like to able to click on a photo in a folder - and then once it
    opens ( in Preview on my computer ) be able to advance to the next picture and the next, without having to "Load them".
    Somebody once showed me how to use to the spacebar to launch into Quik-look
    or something like that, but I cannot get that to work.
    Just keeps opening in Preview with the Next / Previous arrows all grayed out.
    Can anyone tell me how to perform this ) seemingly ) simple task ?
    Thank you,
    Sterne

    Exactly what are you trying to do?
    You should be viewing your iPhoto library using iPhoto - when you do you can use the left and right arrow keys to move between photos
    And note that in iPhoto (different from the finder) folders hold albums and other folders - not photos)
    LN

  • Lines moving through picture and video

    Just bought this I Mac with built in camera. My wife bought a Macbook also with built in camera. hers works great with a good quality picture and video. Mine has lines that constantly move downward across the picture or video. Is it a bad camera or some other issue? It seems to do it in all applications when I try to use it.

    Glad to hear of your success in changing the item.
    3:47 PM Sunday; December 31, 2006
    Happy Holidays

  • Scrolling through pictures with Wacom tablet in Aperture

    HI Guys,
    Is anyone a bit of a whizz on Aperture. I'm using Aperture 3 with a Wacom tablet on a Mac Pro.
    I'm set the touch wheel to scroll as I want to use it to cycle through photos. It works in the Browser View (all pics on the screen), but does nothing when I try to scroll in Split View. I have to use 2 fingers on the Magic Trackpad to get it to scroll along.
    Has anyone had this issue, or does anyone know how to fix it?
    Thanks,
    P x

    You're welcome.  Here's some more.  Should give you some ideas .
    ... and so on.  The radial menu is fast once you get used to it.  And, imho, quite clever:  I'd _much_ rather have context-sensitive radial menus than the silly stacked text menu we have now.
    I highly recommend watching (and taking notes) from all 14 of the videos done by Rebekka Strauß.  [Edit: number of videos corrected.]

Maybe you are looking for

  • Ora-600 error and  DBIF_RSQL_SQL_ERROR

    Dear Team,   After Upgradation from Bw3.0b to NW07 everyday night our Database is shutting down. As per sap recommendation  We have set following db parameter on Development Server. BTREE_BITMAP_PLANS=FALSE BLOOMFILTER_ENABLED=FALSE FIXCONTROL='47283

  • Forte on solaris 2.5

    Hi everyone, I'm curious if anyone is running forte with Solaris 2.5. Any problems? Any performance differences? Thanks in advance, John John Jamison Engineering Manager Sage Solutions, Inc. [email protected] (415) 392-7243 x508 fax: (415) 392-4030 h

  • Internet Service Not Working, sending 404 error

    Hi, I just created an Internet Service pointing to a transaction and I published it but it is not working when I click on Start Service and the browser is opened, I know the servername and the url should be well created cause I delete the service nam

  • Call EJB from 10g

    Not familiar with EJB, hope my question makes sense. What are the avail. options of calling, from PL/SQL, Java program (EJB) that resides on NON-ORACLE app server (JBoss) ? thanks ! 10gR2

  • Unable to set JVM file encoding to UTF-8 on Windows

    Hi, I am running Tomcat on 1.5.0_05 JRE. I tried several things to set the jvm file encoding to UTF-8 instead of the default Cp1252, but no luck yet. The most intuitive approach seems to be to use a JVM option like "-Dfile.encoding=UTF-8" but this do