Stream 14 Driver installation Issues on Windows 7
I am wierdly struggling with something I have done countless times before with other laptops - remove Windows 8 and install Windows 7 I've so far disabled Secure Boot, Enabled legacy support, removed all hard drive partitions and installed Windows 7 which has gone on without issue, the problem is the driver installation. I (as always) download the drivers from: -a) The PC manufacturer if present (not in this case)b) Direct from the hardware vendor I do not use driver download software (trust issues) The first problem driver is the AMD chipset driver, I have downloaded the Catalyst driver many times and yet each install does not actually install any usable drivers (v14.12) which lists the chipset as supported OK, I'll download the broadcom driver for the inbuilt wifi, this was confirmed by the VEN and PID numbers however despite downloading the correct broadcom driver it did not install the wifi device. I thought OK, i'll add a wifi dongle and use that to triple check I have the right chipset driver by using their auto detect feature. However the same problem has occured, I checked the VED and PID number against realteks drivers to find the right one but it will not install this either. This has, at the moment, left me with a HP Stream 14 with Windows 7 and no drivers and no internet connection to use driver dectection. Note: drivers downloaded and copied onto Stream 14 using my PC. Any Thoughts?
Hey, tsumbled upon your thread googling for the same thing. Changed OS from Windows 8.1 to 7. Managed to install USB3 driver, by installing AMD Chipsets drivers from AMD's site, the latest ones should work. Chipset driver also installs support for HDMI Audio, SM Bus, SATA, PSP. I also had problem installing graphics driver (Radeon R3), the latest Catalyst drivers (15.7) weren't working (the .inf file didn't contain needed DEV_9854). But fortunately the Latest Windows Beta driver (15.6) from AMD did work. Broadcom BCM43142 Wifi driver, I downloaded from HP - http://h20566.www2.hp.com/hpsc/swd/public/detail?idx=2&swEnvOID=&action=driverDocument&itemLocale=&swLang=&swItemId=ob_133353_1&mode=4 For the rest, Windows 8.1 drivers worked.
Similar Messages
-
ATI driver installation issue with Windows Vista on Boot Camp (new iMac)
I've just purchased a new 20" iMac with Core 2 Duo 2.4GHz.
Then I installed Windows Vista Ultimate on a Boot Camp partition.
Vista installation was eventless and worked nicely.
Now the problem has begun...
I downloaded the latest ATI graphic card driver (Catalyst 7.7 for Vista 32) from the ATI website. The Catalyst software did not recognize the graphic card and installed nothing. I still have generic Microsoft standard VGA video adapter, which keeps me from playing any recent 3D games...
Someone please help me on this so that I can start playing Oblivion...
Message was edited by: GirakuHi and welcome to Discussions,
I still have to find a verification for this, but:
Aplle has up to now always used the Mobility versions of the ATI and NVIDIA graphics chips in the iMacs and MacBooks, MacBooks Pro.
I assume that the in the new imacs, they are also using the Mobility version of the Radeon 2400/2600.
The ATI drivers you can download from the ATI/AMD website are only suitable for the Desktop Radeons, NOT for the Mobility Radeons.
ATI/AMD does not provide drivers for the Mobility Radeons, but are refering to the Manufacturer of the Computer for Drivers, which is Apple.
Sorry to say, but it seems you have to wait for a new BootCamp version which you include Driver support of the new iMacs.
Sorry
Stefan -
Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86
Hi All,
I'm hoping somebody can shed some light on this issue.
I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
RESPONSE FILE:
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=
# Inventory location.
INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en,en_GB
# Complete path of the Oracle Home
ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
# Complete path of the Oracle Base.
ORACLE_BASE=C:\Oracle
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
# The following choices are available. The value should contain
# only one of these choices.
# InstantClient : InstantClient
# Administrator : Administrator
# Runtime : Runtime
# Custom : Custom
#Example : INSTALL_TYPE = "Administrator"
oracle.install.client.installType=Custom
# Name : oracle.install.client.customComponents
# Datatype : StringList
# This property is considered only if INSTALL_TYPE is set to "Custom"
# Description: List of Client Components you would like to install
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.1.0 -- "Oracle Net"
# oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
# oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
# oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
# Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
#Name : MTS_PORT
#Datatype : int
#Description: Port number to be used for by the Oracle MTS Recovery Service to listen
# for requests. This needs to be entered in case oracle.ntoramts is
# selected in the list of custom components in custom install
#Example : MTS_PORT = 2030
oracle.install.client.oramtsPortNumber=49152
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
oracle.install.client.schedulerAgentHostName=
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
oracle.install.client.schedulerAgentPortNumber=
LOG FILE TO FOLLOWLOG FILE:
Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
The commandline for unzip:
Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Setting Response file data to the Installer
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
INFO: Translating external format into raw format
INFO: Loaded BeanStore using the flow data source
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
ient\install\../stage/products.xml
INSTALL_TYPE Custom
INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE C:\Oracle
ORACLE_HOME C:\Oracle\product\11.2.0\client_1
ORACLE_HOSTNAME GBA-P74444432
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
.0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
et_2:11.2.0.1.0"}
oracle_install_client_OraMTSPortNumber 49152
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in SILENT mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
INFO: Verifying route INVENTORY_NO_CUSTOM_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1023.5547MB (1048120.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:130MB
INFO: Actual Value:21.3053GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <checkPrereqs>
INFO: Terminating all background operations
INFO: Terminated all background operations
WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver -
HP Photosmart D7360 -- Driver/Installation issue
For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohnWelcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Forms 10g Installation issue on windows 7 Professional service pack 1
hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig... -
Satellite L500-13W - Which driver installation order on Windows 7 32bit?
hi
I have Satellite L500-13W and install Windows 7 32bit. I download all drivers.
Which installation order for my model?Installation order must be the same or similar as Vista install order.
Windows 7
Intel Chipset SW Installation Utility
Intel Matrix Storage Manager
Audio Driver
LAN Driver
Card Reader
TOSHIBA HW Setup Utility
TOSHIBA Supervisor Password Utility
TOSHIBA Flash Cards support utility
TOSHIBA HDD_SSD Alert
TOSHIBA SD Utilities
TOSHIBA Assist
Display Driver
TOSHIBA Value Added Package
TOSHIBA Software Modem
Wireless LAN Driver
Touch Pad Driver
Bluetooth Stack for Windows by Toshiba
TOSHIBA Face Recognition
TOSHIBA eco Utility
TOSHIBA Service Station
TOSHIBA PC Health Monitor
ConfigFree
TOSHIBA Web Camera Application
I hope you will be able to install all this stuff and also hope you will be happy with Windows 7.
If you have more questions you are welcome. -
SAP Netweaver Installation Issue on Windows 7
Hi,
I was trying to install Netweaver 7.3 (Java) in my windows 7 and when I was in step 30 of 33 (Java components deployment)
I got the following error
Error message is 'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.. SOLUTION: Check 'undefined' and '' for more information.).
I have successfully created loopback adapter and able to ping the IP address of the adapter . But when SAP server is trying to connect to this adapter using port 50004 and Its getting the error message . I don't know how to assign the port number to this loop back adapter.
I tried to use telnet but it failed . (telnet ram-PC 50004 )
loopback adapter IP : 10.10.0.10
Host name : ram-PC
As I am new to SAP , Please let me know is there any file where I need to define host and port ? Do I need to update service.msc file from windows\system32\drivers\etc\ ? If so, what would be the service name and port ?
Steps taken to resolve this issue :
updated windows host file with IP and host name (10.10.0.10 ram-PC)
updated windows service file with host and port (ram-PC 50004) - This step might be wrong (Do I need to use hostname or service name ?)
uninstalled Antivirus
Turned off windows firewall
Added loopback adapter IP address to Windows firewall inbound rules .
None of the above steps resolved the error . Please help me on the above issue.any help would be appreciated .
Thanks
RamHere is the detailed error message
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
at com.sap.engine.services.dc.api.session.impl.SessionImpl.handleConnectionIssue(SessionImpl.java:381)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.parseNamingException(SessionImpl.java:337)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:230)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:150)
at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:27)
at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:117)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:180)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: javax.naming.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:381)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
... 6 more
Caused by: com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004
at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:64)
at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:39)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:297)
... 11 more
[ Error ]
[ Error ] Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
ERROR[ BEGIN ]
Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
ERROR[ END ]
108
Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
[ Info ] Destroy command:[getParams]
ERROR 2012-02-29 13:27:56.797
CJSlibModule::writeError_impl()
CJS-30181 At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.
ERROR 2012-02-29 13:27:56.844 [sixxcstepexecute.cpp:937]
FCO-00011 The step deploySoftwareComponents with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|usage_enable|0|NW_DeployOptionalSoftware|ind|ind|ind|ind|deploy|0|deploySoftwareComponents was executed with status ERROR ( Last error reported by the step: At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.).
INFO 2012-02-29 13:27:57.702 [synxcpath.cpp:814]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\__instana_tmp.xml.
Edited by: ramkumarsm on Feb 29, 2012 7:37 PM -
HP LaserjetPro M277dw printer and windows vista driver installation issues
I ust got the hot off the press HP Color LaserJet Pro MFP M277 which seems to be a miraculous machine. Just one problem. When trying to download and install the printer driver it goes through the whole process and then tells you the driver will not work with this operating system.
Hmmm. It says on the HP website that this is the correct software for this machine. I have been through at least 10 HP support people up to Level 3 support and hours of online work with HP people trying to install the software. The word I get back is that it will not work with my machine. So I am wondering if I have a Windows Vista 64 bit machine, and the software says it is for that machine, but it wont load, what machine will it work with? The last person I worked with just told me I will need to get a new computer. I thought I just bought a printer that would work with my computer, and now I am told i have to buy a new one?
Any ideas on how to get the software to load? I have some functionality, such as wireless network printing that one technician was able to get to work, but no scanning. Another technician changed all the permissions for installing various programming segments to "everyone" but that didnt work either. He had it so messed up that the it would not print anymore wirelessly either. I had to restore to an earlier date after that guy got off my computer so i could at least get some functionality back.
So, without the driver, I cannot scan to this computer, and i really dont know what other good things i am missing out on because I have never experienced the correct configuration......please help if you can. I need to send the machine back within a certain time period, and I really do think it is the solution for my business, if I could get it to work......Thanks!
PS Direct connection to computer and downloading software that way does't work either.....cannot use the printer directly connected.....Hi,
Is it the following one ? If not, please download then try again:
http://ftp.hp.com/pub/softlib/software13/COL60646/kj-145845-1/HP_LaserJet_M277_PCL6_Legacy_Print_Dri...
By the way, what is the model of your Lasejet M277 printer ? Must be M277 something.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
LaserJet M1319f MFP Installation issue on Windows 7
Dear HP support team and community members,
I'm currently trying to install HP LaserJet M1319f MFP connected by USB on Lenovo Q190 machine /Intel Core i3 processor/ running freshly installed Windows 7 Enterprise 64 bit with Bulgarian language pack, all current updates, Microsoft Forefront Protection /I also tried to disable the Real-time protection/, UAC disabled, administrator account, IE 11, .NET Framework 4.5.1.
The priter was working correctly with Windows XP.
I downloaded the driver package from here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...
After the installation process reach the "Copying files to the hard drive" stage the installer return error Printer Software Installer stopped working.
I tried running with Administrator privileges and/or Windows XP SP3 compatibility mode, but the same error occurs.
I tried Microsoft Fix It software for install/uninstall drivers too,but with no luck either.
I cleaned the cashe and temporary files around 10-15 times.
Windows update is not helping with the drivers too.
I tried to extract the files from the installer and manually add the printer and got error that the installation was not successful and below it says The file was not found /if I recall it correctly/
After that I tried HP Print and Scan Doctor software, but it displays that there is no driver installed and redirecting me to the driver download page.
I tried the Driver Wizard software too, but it returns that this model is no supported.
I tried to change the windows startup to "Selective startup" with "Load startup items" unchecked and all non-microsoft services disabled, but with no success.
Under Safe mode the install won't complete because of the Print Spooler service not running, which is running normally otherwise.
The "ntprint.inf" file is present in the "Windows\inf" folder, the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x86 has only Drivers and Print Processors subkeys and the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors has only Local Port, Microsoft Shared Fax monitor, Standard TCP/IP Port, USB monitor and WSD port subkeys.
The folders Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 are empty.
I ran sfc /scannow in cmd with administrator privileges, but there was no integrity violations.
I tried to disable the IE component, but no luck either.
So now I’m out of any ideas how to connect that **bleep** thing… I hope that someone can help me with this issue.
Currently the devices without installed driver in the Device Manager are "Hewlett-PackardHP LaserJet M1319f MFP" /Hardware IDs USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and HP Scan /Hardware IDs USB\VID_03F0&PID_5817&REV_0100&MI_00 and USB\VID_03F0&PID_5817&MI_00/
I forgot to mention that I tried all kind of variations with these solutions with and without printer plugged in.
Thank you very much in advance for any kind of guidelines.
Best regards,
Ivan
P.S.: At least I think that I managed to gather all known related solutions in this topic…
This question was solved.
View Solution.Hello Gemini02,
First thank you for your assistance!
I uninstalled the IE 11 and install IE 10, but with no success related to the driver issues. I just want to mention to those who are trying to do the same that IE 11 should be removed from Add/Remove Windows components and from Installed Updates.
As for the solutions from your post:
Solution 2: The build in troubleshooting is reporting that no driver is installed (obviously...), but is not helping much with the installation. Windows updates are not much of a help too... The device manager is finding the device, but can't install the driver. More detailed information about the devices in the Device manager you can find in the end of my first post.
I'm posting some screenshots of the issue so that you can get clearer picture of the situation.
So basically I'm downloading the official drivers from the link in my first post. I'm sure that the drivers are the correct one as I downloaded them several time to clear the possibility of technical mistake.
But when I try to install them I get the following error:
The Event viewer information is as follows:
The reports are:
Critical error (red mark):
Faulting application name: ProductInst.exe, version: 1.0.5.3, time stamp: 0x50cedca3
Faulting module name: ProductInst.exe, version: 1.0.5.3, time stamp: 0x50cedca3
Exception code: 0xc000000d
Fault offset: 0x0000000000047bca
Faulting process id: 0xed8
Faulting application start time: 0x01cfb2fc6900c47e
Faulting application path: C:\Users\5BE8~1\AppData\Local\Temp\7zS7BD7\ProductInst.exe
Faulting module path: C:\Users\5BE8~1\AppData\Local\Temp\7zS7BD7\ProductInst.exe
Report Id: b73cc226-1eef-11e4-94ed-50af73237b10
The information above the critical one:
Fault bucket 3550555182, type 5
Event Name: PnPDriverImportError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: 00000002
P3: HPM1319.INF
P4: 327f449ab177b16cf6c33f4effdd0e9ea36383fd
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_f2e6b151a2c3dd88a551b5bb893b8a7e8417d4_0e78848b
Analysis symbol:
Rechecking for solution: 0
Report Id: b390829e-1eef-11e4-94ed-50af73237b10
Report Status: 0
The next in line:
Fault bucket 3550555182, type 5
Event Name: PnPDriverImportError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: 00000002
P3: HPM1319.INF
P4: 327f449ab177b16cf6c33f4effdd0e9ea36383fd
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_f2e6b151a2c3dd88a551b5bb893b8a7e8417d4_0cd08ac2
Analysis symbol:
Rechecking for solution: 0
Report Id: b390829f-1eef-11e4-94ed-50af73237b10
Report Status: 0
And the last one:
Fault bucket 3413207808, type 5
Event Name: BEX64
Response: Not available
Cab Id: 0
Problem signature:
P1: ProductInst.exe
P2: 1.0.5.3
P3: 50cedca3
P4: ProductInst.exe
P5: 1.0.5.3
P6: 50cedca3
P7: 0000000000047bca
P8: c000000d
P9: 0000000000000000
P10:
Attached files:
C:\Users\Петя Станева\AppData\Local\Temp\WER8314.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_ProductInst.exe_d56e40a56282daea123243fa1f100faa5e2bf_06a92cda
Analysis symbol:
Rechecking for solution: 0
Report Id: b73cc226-1eef-11e4-94ed-50af73237b10
Report Status: 0
Solution 3 can't be applied to the current case as I can't install the software so I don't have what to uninstall/reinstall.
I cleared the cache and disabled all optionally installed software in msconfig as suggested, but the issue with the installer is still not resolved.
Solution 4 is not relevant as the device was working fine two days ago.
Solution 5 is difficult for implementation too as the location of the device is in some kind of rural area and it is vital for the implementation of the daily duties of the employee.
So after the failure with the solutions provided in the article I tried to extract the installer to use the drivers and manually install the printer using the file HP1319fp.ini with the "... MFP" driver selected. I set it at new local port named USB. I'm posting the screenshot of the error i get in the end of installation:
After I press the OK button in gets in a loop by returning to the previous page.
I tried the same drivers with existing port USB001, but got the same result as with the new port.
Currently I will try to rename the SoftwareDistribution folder in case that this is kind of windows update cache issue, but don't think so... I begin to think that this device driver is somehow not compatible with the computer hardware...
Thank you and I apologize for taking your time with such issues!
Best regards,
Ivan -
Adobe CS4 Design Center Premium Installation issues on Windows 7 Ultimate x64 (RTM)
I am in the process of moving my systems to Windows 7; as part of that I have attempted to install the Adobe CS 4 Design Center Premium version that I purchased on August 16th. Thus far my experience with this has been disappointing.
My previous system (Windows Vista x64 Ultimate) was running Adobe CS 4 Production Premium version without problems. Upgrading this to Windows 7 worked just fine (so, Win 7 upgrade over Production Premium worked.) However, for unrelated reasons I decided to reinstall a fresh version of Windows 7. and the Adobe CS 4 Design Center Premium version in question.
What I observe is a highly repeatable failure during installation, in which as soon as I get to the phase where it displays "Currently installing LangPack(English) for Device Central" and then dies. Applications are half installed at that point (I can actually use most of the tools, which is why I keep setting this aside to look at it later.) This was a clean system and Adobe CS 4 Design Center Premium was the first thing I tried to install on the box.
Since that failure, I have tried to install it on a completely different system (my laptop) running Windows 7 Ultimate x64 and experienced the same error. The desktop system is a Dell, the laptop is an HP.
The event log indicates a generic "event ID 1000" error. The detailed information shows that something returns STATUS_INVALID_PARAMETER (0xC000000D) as an exception, which is not handled and the program then dies.
Log Name: Application
Source: Application Error
Date: 9/11/2009 6:56:19 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: wam-mps1730
Description:
Faulting application name: Setup.exe_Adobe Setup, version: 2.0.138.0, time stamp: 0x48bf0040
Faulting module name: Setup.exe, version: 2.0.138.0, time stamp: 0x48bf0040
Exception code: 0xc000000d
Fault offset: 0x000ab71f
Faulting process id: 0xb20
Faulting application start time: 0x01ca32e6eed97c22
Faulting application path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Faulting module path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Report Id: e0e73da0-9eda-11de-8e4a-001e4ce53d44
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-11T13:56:19.000000000Z" />
<EventRecordID>2221</EventRecordID>
<Channel>Application</Channel>
<Computer>wam-mps1730</Computer>
<Security />
</System>
<EventData>
<Data>Setup.exe_Adobe Setup</Data>
<Data>2.0.138.0</Data>
<Data>48bf0040</Data>
<Data>Setup.exe</Data>
<Data>2.0.138.0</Data>
<Data>48bf0040</Data>
<Data>c000000d</Data>
<Data>000ab71f</Data>
<Data>b20</Data>
<Data>01ca32e6eed97c22</Data>
<Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
<Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
<Data>e0e73da0-9eda-11de-8e4a-001e4ce53d44</Data>
</EventData>
</Event>
In attempting to find a work-around (since I would like to be able to actually use everything here) I have tried to run the installer in compatibility mode - both XPSP2 and Vista SP2 mode. Both fail in the same fashion.
At this point I've now installed a post-mortem debugger (WinDBG) and will attempt to capture more information about the specific failure. I am hoping that someone has seen this issue previously and has found a successful work-around. I see that others have installed the Master Suite version successfully and I suppose that is one potential solution to the problem that I may explore if i cannot get this package to work properly.Additional information that I have collected (the wonders of a post-mortem debugger):
0:016> kv
Child-SP RetAddr : Args to Child : Call Site
00000000`024ce7e8 00000000`74b0a2df : 00000000`0c12faec 00000000`0c12fb04 00000000`04fda3e0 00000000`74b0a74c : ntdll!NtWaitForWorkViaWorkerFactory+0xa
00000000`024ce7f0 00000000`74aecf87 : 00000000`00000000 00000000`00001000 00000000`0c12fd30 00000000`7efa7000 : wow64!whNtWaitForWorkViaWorkerFactory+0x23
00000000`024ce840 00000000`74ad276d : 00000000`755d0f09 00000000`00000023 00000000`00000001 00000000`0c12fae4 : wow64!Wow64SystemServiceEx+0xd7
00000000`024cf100 00000000`74aed07e : 00000000`00000000 00000000`74ad1920 00000000`00000000 00000000`00000000 : wow64cpu!TurboDispatchJumpAddressEnd+0x24
00000000`024cf1c0 00000000`74aec549 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
00000000`024cf210 00000000`76f4d177 : 00000000`00000000 00000000`7efdf000 00000000`7efa7000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x429
00000000`024cf760 00000000`76f0308e : 00000000`024cf820 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x2bfe4
00000000`024cf7d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
0:016> !analyze -v
Last event: 770.978: Exit process 0:770, code c000000d
debugger time: Fri Sep 11 07:33:12.750 2009 (GMT-7)
0:016> r
rax=00000000000000c0 rbx=000000000c12fedc rcx=0000000000000000
rdx=0000000000000000 rsi=000000007efa7000 rdi=000000007efa9000
rip=0000000076f217ba rsp=00000000024ce7e8 rbp=000000000c12ff88
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000074b0a2bc r13=00000000024cfd20
r14=00000000024cf170 r15=0000000074ad2450
iopl=0 nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000200
ntdll!NtWaitForWorkViaWorkerFactory+0xa:
00000000`76f217ba c3 ret
Thus, this appears to be related to WoW64 behavior in some fashion. I am unfamiliar with NtWaitForWorkViaWorkerFactory, so I'm not sure why it would be returning STATUS_INVALID_PARAMETER.
So, I've collected a mini-dump for the process, but it's 300MB. In the unlikely event someone is interested in analyzing it, let me know and I'll gladly provide it.
I'm now wondering if I should re-wipe this drive, install Vista, Adobe CS 4 Design Center Premium and then upgrade to Windows 7. But that is a lot of effort to work around an app compat issue. -
Tuxedo 10gR3 installation issue on Windows XP
Hi,
Am trying to install tuxedo 10gR3(server) on Windows XP Professional. When I try to select C:\Oracle as ORACLE_HOME, it gives an error "Path should be absolute and have write Permissions!" and wont proceed further. I had to cancel the installation. I can confirm that C:\Oracle exist and is not read only. We have oracle database installed at C:\Oracle\<sub-folders>. The installation log was not of much help. These are contents of install log: -
======================
Thu May 28 02:22:14 PDT 2009
Free Memory: 6301 kB
Total Memory: 16320 kB
java.class.path:
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData\IAClasses.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jdglue.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData\Execute.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\InstallerData\Execute.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData\Resource1.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\InstallerData\Resource1.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\InstallerData
ZGUtil.CLASS_PATH:
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData\IAClasses.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jdglue.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData\Execute.zip
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\InstallerData
sun.boot.class.path:
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\rt.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\i18n.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\sunrsasign.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\jsse.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\jce.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\charsets.jar
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\classes
java.ext.dirs:
C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre\lib\ext
java.version == 1.5.0_08 (Java 2+)
java.vm.name == Java HotSpot(TM) Client VM
java.vm.vendor == Sun Microsystems Inc.
java.vm.version == 1.5.0_08-b03
java.vm.specification.name == Java Virtual Machine Specification
java.vm.specification.vendor == Sun Microsystems Inc.
java.vm.specification.version == 1.0
java.specification.name == Java Platform API Specification
java.specification.vendor == Sun Microsystems Inc.
java.specification.version == 1.5
java.vendor == Sun Microsystems Inc.
java.vendor.url == http://java.sun.com/
java.class.version == 49.0
java.compiler == null
java.home == C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows\resource\jre
java.io.tmpdir == C:\DOCUME~1\pkarthic\LOCALS~1\Temp\
os.name == Windows XP
os.arch == x86
os.version == 5.1
path.separator == ;
file.separator == \
file.encoding == Cp1252
user.name == pkarthic
user.home == C:\Documents and Settings\pkarthic
user.dir == C:\Documents and Settings\pkarthic\Local Settings\Temp\I1243502280\Windows
user.language == en
user.region == null
Install Begin: Thu May 28 02:18:49 PDT 2009
Install End: Thu May 28 02:18:53 PDT 2009
Installed by InstallAnywhere 8.0 Enterprise Build 3063, by Macrovision
INSTALLATION WAS CANCELLED BY USER DURING PRE-INSTALLATION
User Interactions
Summary
Installation: Cancelledduring pre-install.
31 Successes
0 Warnings
0 NonFatalErrors
0 FatalErrors
Action Notes:
None
Install Log Detail:
Custom Action: com.bea.installer.InstallerInit
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Oracle
Value Name: BEAHOMELIST
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\Release 6.1
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\Release 6.2
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\6.3
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\6.4
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\6.5
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\7.1
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\8
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\8.1
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\9.0
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\TUXEDO\10.0
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\M3\2.1
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\M3\2.2
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\WebLogic Enterprise (C++)\4.2
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\WebLogic Enterprise\5.0
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\WebLogic Enterprise\5.0.1
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems\WebLogic Enterprise\5.1
Value Name: Company_Name
Status: SUCCESSFUL
Custom Action: com.bea.installer.CheckPrevVersions
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\TUXEDO\10.3.0.0_VS2005
Value Name: Company_Name
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\TUXEDO\10.3.0.0_VS2005\Environment
Value Name: TUXDIR
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Custom Action: com.bea.installer.CheckContinue
Status: SUCCESSFUL
Install Action: InstallAnywhere Variable
Status: SUCCESSFUL
Custom Action: com.bea.installer.CheckInstallMode
Status: SUCCESSFUL
INSTALLATION WAS CANCELLED BY USER DURING PRE-INSTALLATION
======================
Can you help me with debug switches(or command line options) that can be used with the installer.
Thanks,
PremPrem,
In addition to the C:\Oracle directory, the C:\Oracle\tuxedo10gR3_VS2005 directory also must either not exist or be a writable directory. If C:\Oracle\tuxedo10gR3_VS2005 previously exists as an ordinary file or as a read-only directory then you will get the "Path should be absolute and have write Permissions!" erorr.
If you type "C:\Oracle" manually into the installer you must be sure not to enter any leading spaces. (This will not be an issue if you use the "browse" functionality to select this directory.
You may also want to investigate if you get the same error if you try to install in Tuxedo in a directory that has not previously been used as an ORACLE_HOME and you should ensure that there is sufficent disk space on the C: drive. (These problems shouldn't cause the error your seeing, but it is worthwhile eliminating these as possible causes.)
If these suggestions don't resolve the problem, then you'll probably need to enter a support case to determine what is different between your environment and the environment of other customers whose intallations have been successful.
Regards,
Ed -
All-in-one driver installation fails under Windows 7
I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Wireless driver installation issues
I have Lenovo G510 laptop.
I am having issues while installing Wireless drivers. While installing wireless drivers it is going to Bluescreen and giving message "irql_not_less_or_equal" and after it recovers no wireless drivers installed.
I have tried the following troubleshooting steps:
Reinstall Windows 8.1 4 times
Installed BIOS updates
Reinstall Chipset drivers
Able to connect using wired without any issues
Removed and reinstalled WLAN drivers (wlan222w81)
Tried using comatibility mode installation
Tried installing wireless drivers from device manager
Installed WLAN Windows 7 drivers as well
Tried atheros_ar5xxx_ar9xxx_wireless_10_0_0_298_whql drivers as well
Tried to instal it in SMWN
Tried drivers win7-10.0.0.302-whql.zip as well
All these troubleshooting gives same Blue screen issue
No wireless drivers listed in Network Adapter
Also in DM it is showing yellow esclamation mark for Network Controller under Unknown devices
With laptop I got Windows 8 and I have reformated OS and lost recovery partition
Downloaded Win 8.1 from micorsoft website and installed, it took defauly key and activated automatically
Product ID: 59396455
Serial no: **********
PCI\VEN_168C&DEV_0036&SUBSYS_302617AA&REV_01
I have now installed Windows 7 and Wireless working fine. I want W8.1 but due to wireless drivers installation I am unable to continue with 8.1.
Mod comment: Serial number removed for members protection.Install this ControlVault driver which should install the driver for the Broadcom USH:
http://ftp.dell.com/FOLDER01400368M/26/CV_Drv_Setup_RDYG9_A11_64bit_ZPE.exe
Try installing this driver for the audio:
http://downloads.dell.com/FOLDER96848M/3/R273997.exe
Provide the hardware IDs of the network controller so I can check what wireless card variant you have:
http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/checking-hardware-ids-in-the-device-manager/ -
Oracle Installation Issue on windows 7 64 bit - database 11.2.0.3
Hi ,
I am trying to install 11.2.0.3 database on windows 7 prof 64 bit in lenova lap
The issue is at the last screen the installer just hangs in the prerequists check.
this is the installer log out put last portion
INFO: Verification Result for Node:Laksiri
INFO: Expected Value:50MB (51200.0KB)
INFO: Actual Value:664.5859MB (680536.0KB)
INFO:
INFO: *********************************************
INFO: Swap Size: This is a prerequisite condition to test whether sufficient total swap space is available on the system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO:
INFO: Verification Result for Node:Laksiri
INFO: Expected Value:2.7944GB (2930184.0KB)
INFO: Actual Value:3.7259GB (3906912.0KB)
INFO:
INFO: *********************************************
INFO: Free Space: Laksiri:C:\Users\IBM_AD~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO:
INFO: Verification Result for Node:Laksiri
INFO: Expected Value:500MB
INFO: Actual Value:93.9114GB
INFO:
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO:
INFO: Verification Result for Node:Laksiri
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO:
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO:
INFO: Verification Result for Node:Laksiri
INFO: Expected Value:5076
INFO: Actual Value:561
INFO:
INFO: All forked task are completed at state performChecks
INFO: Completed background operations
INFO: Moved to state <performChecks>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <performChecks>
INFO: Completed validating view at state <performChecks>
INFO: Validating state <performChecks>
INFO: Using default Validator configured in the Action class oracle.install.ivw.db.action.PrereqAction
INFO: Completed validating state <performChecks>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
and i found in the windows appliction log
Log Name: Application
Source: Application Hang
Date: 4/17/2012 12:01:24 PM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: Laksiri
Description:
The program javaw.exe version 5.0.300.3 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 6a8
Start Time: 01cd1c618e421f8e
Termination Time: 6
Application Path: C:\Users\IBM_AD~1\AppData\Local\Temp\OraInstall2012-04-17_11-45-50AM\jdk\jre\bin\javaw.exe
Report Id:
Can some one tell what is the reason?Hi,
As far as I can find on Google, I only see people solving a similar problem, by totally removing all Java installation and then install the latest Java 6 update.
Have a look e.g. here: http://www.java-forums.org/awt-swing/34794-java-application-fails-launch-without-error.html
It is not about installing oracle, but the person does have similar problems
Success!!
FJFranken
Edit: Another link: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/java-tm-platform-se-binary-is-not-responding/38ea1c33-bd72-46aa-b87c-9172be7c57cc?msgId=1b3c5027-bc10-4425-b55c-038982d24953 -
Adobe cs5 Production premium installation issues on Windows 7
Hello
New Hardisk.
New Bios,
New windows 7 Ulitimate
Up to date windows 7 updates
Installing cs5 as administrator
Installation stops on Disk 2 exactly at 76% . Tried twice and the same case.
CPU goes up to 100% Memory 29%
Tested the Hard disk fine. New 300gb 10krpm Velociraptor.
What is the issue? No errors just installation hangs and freezes the whole system. I had to do a reset the system.
Any help is appreciated.
thanks,
HariI tried installing on my laptop which had Adobe CS4 on Windows 7 64 bit.
The dvds are good. It installed without a glitch. I didn't have to disable services or cleanup anything.
Now i can scrub thru my RED footage so fat it feels like knife on a butter.
But my desktop is still having issues. I cleaned up using CS5 cleanup script. and ran as administrator.
Now i am going to cleanup again and disable all the services and try once more. If it doesn't work, i am calling the support tomorrow.
Thank you Bob and Matt for the suggestions.
Maybe you are looking for
-
Photoshop CC crashes on startup under OS X 10.8.5
After Adobe Creative Cloud installed Photoshop CC via the root account, see: http://forums.adobe.com/thread/1302496 The Adobe Photoshop CC 14.1.1 (14.1.1.415) crashes immediately on startup under OS X 10.8.5 unless I am running logged into the root a
-
Firefox asks what to do with some PNG images instead of just displaying them
Not sure what is going on here, but some PNG images seem to confuse Firefox, while others are fine. While some PNGs just display when clicked on (eg: when wanting to see a full size image from a thumbnail), others make Firefox ask what I want to do w
-
RMAed 4890 making high pitch sound in game
MSI P55-GD80 I5 750 Cosair dominator 2x2gb MSI 4890 cyclone win7 64bit ocz 700w just got RMAed 4890 back it's making high pitch sound whever I start gaming did have this before RMA, when it was working I remember this sound from back in the nvidia 7x
-
I'm experiencing what appears to be a kernel panic, that freezes my iMac Quad Core i7 w/ 8gb RAM, running 10.7.5. The freeze started after updating from 10.7.4 to 10.7.5. It appears to occur randomly, but my screen will freeze, except for mouse mov
-
Text substitution in non-native apps.
Can text substitution work in non-native apps like Chrome? I'd rather use a built-in feature than load Typinator or other apps. They sometimes get hung up, whereas when I was suing Safari it was all smooth with the OS version...