Stream is working fine But no sound
I have a nissue of sound too
I am using TV CARD to make stream and voice is working well when I watch any channel on TV card software .
When I try to make stream using media encoder. I am getting vidoe but No voice. Flash media encoder is showing the voice lights are blinking as well.
but on stream page there is no voice
I am using, build in sound card
Any one has any suggestion how to fix this ? as vidoe is working well this confirm that I have a RAW Card
Thanks
there is no reason to use 3 i can go for latest one and try it today.
let me tell you again what I am using.
i am using a simple TV CARD in PCI Slot
it is working fine with TV card software and it did not ask for additonal cable etc and voice is working fine.
I have bulid in sound card
For FMS ETc, I also put an additioanl cable from TV CARD Audio/Vidoe to Sound card
Could you recommnd some TV Card shoudl I Use ?
Similar Messages
-
No sound over HDMI, picture works fine but in sound manager tells me HDMI not connected
Hi There
I have a tm2 1050ez and am experiencing problems with my HDMI port.
When I connect it the display automatically gets duplicated and everything works fine, but when I try to play a movie with vlc for example I do not get any sound through the TV, only on the tablet.
Of course I went into the sound manager because I suspected that you must tell the tm2 where to play the sound, but to my surpise it said that the HDMI cable was not connected?
I therefore could not make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged and unplugged it several times to no avail.
I hope someone can help me on the above, I already searched the net for several hours but havn't seen a similar problem, with the most problems it does show the cable as conneted..
Thanks in advance!
Geen
This question was solved.
View Solution.I have same issue as reported by another board member.
I've HP DV4t 1300 laptop with Vista 64bit with service pack 2. I upgraded all drivers and everything is upto date.
On awaking from sleep/hibernation AUDIO is screwed up on LCD connected via HDMI. No matter what I do if I make my computer sleep/hibernate and then connect LCD I'm unable to get audio working.
Help from technician will be appreciated. Technician can reporduce issue as I mentioned.
Thanks, -
Equium M50 series, sound devices "working fine" but no sound at all.
I've seen tons of posts on this topic, and yes, the devices are properly installed, there are no driver conflicts and I have checked the manual volume control on the front of the laptop. The sound used to work fine and suddenly, nothing's happening.
Can someone help before I break this thing please?Thanks for your help, but unfortunately it was to no avail.....
Plugging headphones in works fine, which suggests i may have damaged both speakers, but hell, I'm getting a Macbook Pro soon anyway, 'cos this laptop is pretty **bleep** useless at doing anything I need it for.
And no, I am not running Vista, and thankfully (because of the nearing purchase of a Mac) never will need to. It's Microsoft's biggest mistake.
Thanks for the help anyway! -
my iPhone 4 stopped giving out sound..
On the left side of the phone above the volume + and - buttons there should be a toggle switch (silence switch) if you see orange/red that means your iPhone is in vibrate mode and will be quiet.
Switch the toggle so it shows no orange/red and that should correct the issue.
If you still get no sound after that you may want to check your bluetooth to make sure its not connected to another device (sound is being sent there) ...
If that doesn't work, stick some headphones into the headphone jack and see if you can hear the sounds from the headphones... the device may also think there is headphones plug'd in which can also be the issue
If the issue persists past that explore the option of restoring the device from the last time it did make sound and if that doesn't work you may need to contact Apple for other options
Hope this helps!
GL! -
Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...
Videos in a shared Photo Stream can only be streamed, they cannot be downloaded.
-
Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?
Install Flip4Mac which allows you to play wmv files.
-
I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
How do I get the built-in microphone to work on my IMac? Camera works fine, but I can't record sound.
I always assummed that the mic was part of iSight (intertwined?). The mic is situated right next to iSight. It would seem to me the solutions would be the same some what.
Regarding the OP, I also suspect his/her problem is hardware. It's rather unusual for the internal mic to not work yet the iSight does. -
Hi.. HP spectre G4X24PA#ABG, bought a few days ago, links in via HDMI cable to Sony HD TV - picture fine but no sound.. tried Control Panel, Sound etc but no HDMI sound to click and make say default?? IDT High Definition Audio Codec listed but no connect to HDMI - suspect drivers not up-to-date?? But HP assistant says all is up to date?? Have looked on web - many answers for Win XP/Vista etc but I am running WIN 8.1- can always connect external speakers or use Y-connector but I think this single HDMI cable SHOULD work?? Any help much appreciated - first post so please treat me gentle (and as a new silly nerd head please... i.e simple replies please...)!!
This question was solved.
View Solution.Solved this??. does appear to be the order in which the equipment is connected... first, HDMI cable connected to TV and computer, then switch on computer, then switch on TV.. seems to work with picture and sound coming from TV each time so far... (Plus, on one occasion I had to check "mute" was off!!)
-
I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!
Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have paid for creative cloud, photoshop works fine but it will not let me register lightroom
I have paid for creative cloud, photoshop works fine but it will not let me register Lightroom
Lightroom must be installed via the Creative Cloud Application.
It sounds like you have installed a Perpetual Licensed Version or a Trial Version of Lightroom. Uninstall any versions you have installed of Version 5 and then reinstall via the Creative Cloud App. -
My imac screen works fine but it keeps flikering and freezing whats wrong with it
my imac screen works fine but it keeps flikering and freezing whats wrong with it? theres no crack or problem with it it just freeze's ande flikers
It sounds as if your graphics chip (on the logic board) is failing. The other answer could be that your screen is not well, but I lean more towards the graphics chip. If you have Apple care or are still under warranty, call Apple.
-
I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?
I think that is happening is that the microphone is on during this recording. If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality. If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
I am still looking for the solution we all want, which is to save the audio in reasonable quality.
Anyone out there with some ideas?
Cheers,
Rob -
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.
Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium
Maybe you are looking for
-
Is there a way to flip the pages in a .pdf so that all of the text is readable (in other words all documents are right side up)? I have Adobe Acrobat X and am using Windows 8.1.
-
BID Invitation after create is avaiable for all purchase groups
Hello, I need help to solve the follow problem: I created a BID using item from a SC, the data is normal, but the BID is visible by all purchase groups. I tried fill the field source_rel_ind in table bbp_pdigp with 'X', but the problem pe
-
Solaris 10 Net Install - Illegal Instruction
Hi Colleagues, I 've been wrestling with this for awhile and can't seem to correct the problem. Searching the forum and the Web has also not returned any solutions. Problem: I'm trying to install Solaris 10 10/09 on a SunFire V100 (128MB Ram, 40GB an
-
Release strategy should trigger in different systems EHP7 and ECC6
Hi All, At our client side some are using ECC 6 and few are on EHP7.We need to define the release strategy in a such a way that both the user can approve the PR in cross system.For example- user A is using ECC6 and he created PR ,now he need to tak
-
Refnum out: where to find it on the function/c​ontrol palette?
Refer pic. Refnum out looks like a dummy variable to paste to the shift register so the register would not be empty, am I right? But I searched on the function/control palette, I can't find refnum out, where is it? Solved! Go to Solution. Attachments