Stream multiple bitrates but only save one to file?

I have configured FMLE to stream 2 bitrates to Ustream.
For 'Save to File' the manual says add "%i" to name which saves both bitrates to disk.
Is their a way to choose one bitrate to save to disk?
The stream is here: http://phoebeallens.com
Thanks, Joe

Hi Kosta,
I think that the counts only get updated if you automatically sync your iPod. If the iPod is on manual update the count shouldn't change.
Shouldn't be too hard to test but I'm not near my iPod at the moment.
Regards,
Colin R.

Similar Messages

  • Photos in my from my iPhone have same numbering as photos from my dig camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  Help?

    Photos in my from my iPhone have the same numbering as photos from my digital camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future?  I'm really hoping I don't have to go through and manually rename every single picture.  Thanks.

    How are you backing up the photos?  The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
    You can use a backup application that does incremental backups.  Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro.  The lower cost version, Synk, will do the same job.  Other similar apps can be found at MacUpdate.com.  
    OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name.  I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg.  File renaming apps can also be found at MacUpdate.com.  Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
    OT

  • The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

    Hello. I added custom http response headers to my SP site web config file as follows: 
    <httpProtocol>
          <customHeaders>
                 <add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
          <add name="Access-Control-Allow-Origin" value="*" />
          <add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
          </customHeaders>
        </httpProtocol>
    When I try to call any web service, i get these headers two times each: 
    HTTP/1.1 200 OK
    Cache-Control: private, max-age=0
    Transfer-Encoding: chunked
    Content-Type: application/atom+xml;type=entry;charset=utf-8
    Expires: Sat, 01 Mar 2014 19:11:37 GMT
    Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
    ETag: "3"
    X-SharePointHealthScore: 0
    SPClientServiceRequestDuration: 20
    SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
    request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
    X-FRAME-OPTIONS: SAMEORIGIN
    Persistent-Auth: true
    Access-Control-Allow-Methods: POST,GET,OPTIONS
    Access-Control-Allow-Origin: *
    Access-Control-Allow-Headers: Content-Type,Authorization
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Access-Control-Allow-Methods: POST,GET,OPTIONS
    Access-Control-Allow-Origin: *
    Access-Control-Allow-Headers: Content-Type,Authorization
    MicrosoftSharePointTeamServices: 15.0.0.4569
    Date: Sun, 16 Mar 2014 19:11:37 GMT
    and that gives me error from ajax: The 'Access-Control-Allow-Origin'
    header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
    The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
     Origin 'null' is therefore not allowed access.
    Any idea???

    Hi Ann,
    Please check whether there are duplicate custom headers in your code.
    Similar issue for your reference:
    http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment 
    Regards,
    Rebecca Tu
    TechNet Community Support

  • I have my ipod backed up on multiple computers but only one recognizes all my playlists.  How can I get all my play lists to show up on multiple computers?

    I have my ipod backed up on multiple computers but only one computershows all my playlists.  How can I get all my play lists to show up on multiple computers?

    If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
    Using iPod with Multiple computers
    Managing content manually on iPod
    If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it.

  • E-Mail Issues: Retrieved E-Mails deleting off server but only on one of two accounts

    I am the proud owner of a Z10 as of 4 days ago. So far, it's a great device, but I've got one problem. I want the e-mail messages retrieved on my phone to stay on the server, and this is working, but only for one account.
    I setup my two e-mail accounts, Comcast and GMail, both as POP accounts. I did not setup GMail as IMAP. I tested the connections to see that the messages were properly retrieved on the phone, then I logged into each account to see that the messages were staying on the server. It appeared as though they were, but apparently I didn't wait long enough on the GMail account because the messages were being deleted from the server and I didn't notice this for 3 days. Again, my phone is NOT doing this for my Comcast account and I don't know why.
    I have about 10 e-mails now on my phone in my GMail account that I can't seem to get back on the GMail server. I need to do this so I can download the messages to my home server where all my mail is stored.
    I thought maybe I could create a second IMAP GMail account in the hub and copy the messages from one account to the other, but I can't.
    If I continue to let the phone get those messages, they'll continue to be removed from the server.
    If I forward them to myself, then they just show up as having come from me and that's not what I need either.
    If I delete the account entirely, I lose my messages and that's definitely not what I want.
    I thought I could tell the phone to stop logging into the GMail account by updating the password on the device, but it has to authenticate to the server to confirm that the password is correct, and if it isn't, it won't take the password and returns an error.
    So far, the only thing I've been able to do to get the phone to stop retrieving the messages is to change my GMail password and not update it on the phone. That way, the phone can't sign in to GMail at all and get any new mail. However, I still have these 10 messages on my device that I need to export somehow.
    Is there a way to export mail on this device? Is there a way to copy messages from account to account? What directory is the mail stored in and what file format is it stored in? Can I convert the messages to .csv and do it that way? And why did this happen only for my GMail POP account and not Comcast?

    This is a wi-fi network connection problem - not a problem with an email account.
    Do you have cellular reception at home? If so, you should be able to receive email with both email accounts as long as you have an internet connection with the cellular network.
    On your iPhone go to Settings > General > Reset and select Reset Network Settings.
    This will delete all wi-fi network settings from your iPhone for every wi-fi network you have successfully connected your iPhone with.
    After doing so check if your wi-fi network is available again to re-join.

  • Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

    Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month.  How do I do this with the new operating system?

    Adding to Alan's answer:
    One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled. 
    If you weren't using either of E-series board's counters, there is a nifty solution to this!  You'll be using 1 of the counters to generate the variable-rate sampling clock.  You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter.  This gives you a hw-timed measurement of every sampling interval.  You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
    Note:  the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st.  For your app, you should ignore it.
    -Kevin P.

  • BB is not giving me option to send but only save in draft.

    I have a BB Curver 8300.  Some mails when try to reply, BB is not giving me option to send but only save in draft.
    I tried deleting Service book and resending it is not working..
    I took backup and then Wiped the Handel, restored the backup. Still no luck..
    Pl advice. Thx
    My carrier is LoopMobile

    Only some mail? Most likely that email not giving you that option was enabled by the service book(s) you deleted.
    Try sending your Service Books again.
    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why suddenly will Adobe not print a PDF file but will only save as .prn file I cannot print

    Why suddenly will Adobe not print a PDF file but will only save as .prn file that my computer will not recognize?  This is a new problem never experienced before.  I have tried updating all versions of Adobe Reader but still no results.

    Turn off the "print to file" option.

  • IPhone and MacBook Pro but only have one Apple account

    Brand new to the MacBook Pro world.  First Apple laptop (or Apple computer at all for that matter) so of course I have some questions. I think I am correct in saying that basically each Apple device has to be separate and apart from another even if they reside in the same household.  Meaning that each one has to be logged on to a separate and unique Apple account and email address for things like Facetime and iMessage to work properly. So, with that said......If I personally own the iPhone and MacBook Pro but only have one Apple account how can I make them both work separately and independent of each other??? The problem I've noticed is that Facetime and iMessage do not work and conflict with each of the two devices.

    Hi BigDisMe,
    Thanks for using Apple Support Communities.
    Congratulations, and welcome to the Mac World. Actually, you can use an Apple ID, together with iCloud to make your devices work together. Both devices can be connected to the same Apple ID, and use Facetime, Messages, and email together.
    As long as both of your devices are updated to the latest OS, OS X 10.9 Mavericks for your MacBook and iOS 7.0.4 for your iPhone, you can:
    On Mac:
         1. Open System Preferences-iCloud
         2. There should be a button somewhere that says, "Add Account".
         3. Use your Apple ID to log in.
         4. Make sure to enable your Messages, Facetime, and email accounts.
         5. There is no Step 5.
    On iPhone:
         1. Open Settings-iCloud.
         2. There should be a button somewhere that says, "Add Account".
         3. Use your Apple ID to log in.
         4. Make sure to enable your Messages, Facetime, and email accounts.
         5. There is no Step 5.
    Good Luck,
    -Marcus

  • Safari stalls, but only on one user account

    I am having a problem with web browsers, but only on one particular user account.  Safari will usually (>90% of the time) stall after the blue bar loads 1/4 to 1/3 of the way.  It will hang permanently and never complete loading the page.  This happens primarily when I click on a link in any web page.  I can sometimes (<25% of the time) go to a page by typing the URL in the address bar.  This happens with any browser (Safari, Thunderbird, Google Chrome) with this user account.  On all other user accounts, all web browsers work normally.  The user account that is giving me trouble is the one with all of our photos, documents, etc., so would prefer not to simply delete this account and create a new one. 
    I have already tried emptying the cache, disabling the cache, restarting the computer, updating to the latest version of OS X, clearing history and website data, etc. 
    I have a mid-2011 iMac 12,1 with  2.7 GHz Intel core i5 processor and 20 GB of memory.  I am running OS X Yosemite 10.10.2 and Safari 8.0.4.  I have a 1 TB hard drive with 630 GB available. 
    Any assistance would be greatly appreciated!

    Results from Administrator account (note:  Safari and other web browsers work fine on this account)
    Start time: 22:07:44 03/21/15
    Revision: 1299
    Model Identifier: iMac12,1
    System Version: OS X 10.10.2 (14C1514)
    Kernel Version: Darwin 14.1.0
    Time since boot: 4:26
    Root access: No
    UID: 504
    Memory
        BANK 0/DIMM0
          Size: 2 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x02FE
        BANK 1/DIMM0
          Size: 2 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x02FE
        BANK 0/DIMM1
          Size: 8 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x85F7
        BANK 1/DIMM1
          Size: 8 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x85F7
    SerialATA
        ST31000528AS                           
    USB
        FT232R USB UART (Future Technology Devices International Limited)
        Photosmart 5510d series (Hewlett Packard)
        My Passport 0740 (Western Digital Technologies, Inc.)
    Bluetooth
        Apple Wireless Keyboard
        Apple Wireless Trackpad
        Apple Magic Mouse
    Memory (MB)
        kernel_task (UID 0): 1232
    Firewall: On
    DNS: 209.18.47.61
    HID errors: 2
    Kernel log
        Mar 16 17:21:19 Limiting closed port RST response from 369 to 250 packets per second
        Mar 19 15:18:03 hfs: could not initialize summary table for Microsoft Error Reporting
        Mar 19 15:18:03 hfs: mounted Microsoft Error Reporting on device disk4s2
        Mar 19 15:18:04 hfs: unmount initiated on Microsoft Error Reporting on device disk4s2
        Mar 20 08:58:57 Limiting closed port RST response from 350 to 250 packets per second
        Mar 20 09:08:21 Limiting closed port RST response from 726 to 250 packets per second
        Mar 21 17:30:06 MAC Framework successfully initialized
        Mar 21 17:30:06 CoreStorageFamily::unlockVEKs(UUID) VEK unwrap failed. this is normal, except for the root volume.
        Mar 21 17:30:07 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
        Mar 21 17:30:07 **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x5b00 -- 0xa800 -- 0x7000 ****
        Mar 21 17:43:29 MAC Framework successfully initialized
        Mar 21 17:43:29 CoreStorageFamily::unlockVEKs(UUID) VEK unwrap failed. this is normal, except for the root volume.
        Mar 21 17:43:29 **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xb800 -- 0xc000 -- 0xd800 ****
        Mar 21 17:43:29 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
        Mar 21 17:43:37 IOHIDSystem: Seize of AppleMultitouchHIDEventDriver failed.
        Mar 21 17:43:37 IOHIDSystem: Seize of IOHIDPointing failed.
        Mar 21 18:12:15 ALF: ifnet_get_address_list_family error 12
        Mar 21 18:17:20 ALF: ifnet_get_address_list_family error 12
    System log
        Mar 21 21:46:21 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:46:21 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:48:22 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:48:22 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:50:22 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:50:22 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:52:23 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:52:23 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:54:24 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:54:24 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:56:24 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:56:24 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 21:58:25 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 21:58:25 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 22:00:26 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 22:00:26 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 22:02:26 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 22:02:26 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 22:03:19 cloudd: Could not create primary backing account
        Mar 21 22:04:27 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 22:04:27 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 22:06:27 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 22:06:27 com.apple.internetaccounts: This user is not allowed access to the window system right now.
        Mar 21 22:08:28 com.apple.internetaccounts: Set a breakpoint at CGSLogError to catch errors as they are logged.
        Mar 21 22:08:28 com.apple.internetaccounts: This user is not allowed access to the window system right now.
    launchd log
        Mar 21 21:46:21 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:46:21 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:48:22 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:48:22 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:50:22 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:50:22 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:52:23 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:52:23 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:54:23 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:54:24 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:56:24 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:56:24 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:58:25 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 21:58:25 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:00:25 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:00:25 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:02:26 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:02:26 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:02:51 com.apple.xpc.launchd.user.504.100037.Aqua: Could not import service from caller: caller = otherbsd.1735, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar 21 22:04:27 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:04:27 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:06:27 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:06:27 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:08:28 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.
        Mar 21 22:08:28 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.
    Loaded kernel extensions
        com.FTDI.driver.FTDIUSBSerialDriver (2.2.18)
    System services loaded
        com.adobe.fpsaud
        com.apple.watchdogd
        com.backblaze.bzserv
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
    Login services loaded
        com.adobe.AdobeCreativeCloud
        com.oracle.java.Java-Updater
        com.perceptiveautomation.IndigoServer2
    iCloud errors
        bird 984
        CallHistorySyncHelper 6
        comapple.InputMethodKit.UserDictionary 4
        Safari 1
    Restricted files: 3
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Sep 25 21:48:29 2014
        - checksum: 3284129377
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>21</integer>
        <key>Minute</key>
        <integer>48</integer>
        <key>Weekday</key>
        <integer>6</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.backblaze.bzserv.plist
        - mod date: Jan  4 09:17:45 2015
        - checksum: 509978751
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>Label</key>
        <string>com.backblaze.bzserv</string>
        <key>OnDemand</key>
        <false/>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Backblaze.bzpkg/bzserv</string>
        </array>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.perceptiveautomation.IndigoServer2.plist
        - mod date: Jun 29 09:30:23 2013
        - checksum: 2983990586
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.perceptiveautomation.IndigoServer2</string>
        <key>KeepAlive</key>
        <false/> <!-- Would like to use true, but we want to keep the IS process alive, not the /usr/bin/open command. -->
        <key>RunAtLoad</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-a</string>
        <string>/Library/Application Support/Perceptive Automation/Indigo 6/IndigoServer.app</string>
        </array>
        </dict>
        </plist>
    Installations
        Garmin Communicator Plugin: 12/25/12, 12:41 PM
        PlugIn: 12/15/12, 3:59 PM
        PlugIn: 11/3/12, 3:13 PM
        Microsoft AutoUpdate for Mac: 7/4/12, 1:19 PM
        Microsoft Office for Mac 2011: 7/4/12, 1:17 PM
    Elapsed time (sec): 495
    Results from User Account -- This is the account where web browsers don't work properly
    Start time: 22:29:12 03/21/15
    Revision: 1236
    Model Identifier: iMac12,1
    System Version: OS X 10.10.2 (14C1514)
    Kernel Version: Darwin 14.1.0
    Time since boot: 4:47
    Admin access: No
    UID: 501
    Memory
        BANK 0/DIMM0
          Size: 2 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x02FE
        BANK 1/DIMM0
          Size: 2 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x02FE
        BANK 0/DIMM1
          Size: 8 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x85F7
        BANK 1/DIMM1
          Size: 8 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x85F7
    SerialATA
       ST31000528AS                           
    USB
       FT232R USB UART (Future Technology Devices International Limited)
       Photosmart 5510d series (Hewlett Packard)
       My Passport 0740 (Western Digital Technologies, Inc.)
    Bluetooth
       Apple Wireless Keyboard
       Apple Wireless Trackpad
       Apple Magic Mouse
    Memory (MB)
       kernel_task (UID 0): 1238
    Firewall: On
    DNS: 209.18.47.61
    Diagnostic reports
       2015-02-20 cider crash x2
       2015-02-20 com.apple.WebKit.WebContent crash x2
       2015-02-23 PluginProcess crash
    Console log
       Mar 15 10:26:54 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 15 10:27:05 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 18 12:27:43 ReportCrash Invoking spindump for pid=16016 wakeups_rate=293 duration=154 because of excessive wakeups
       Mar 21 17:44:19 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
       Mar 21 17:44:19 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
       Mar 21 17:44:19 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
       Mar 21 17:44:19 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
       Mar 21 17:44:22 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
       Mar 21 17:44:32 mbloginhelper Property list invalid for format: 200 (property lists cannot contain NULL)
       Mar 21 17:45:18 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 17:45:24 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
       Mar 21 17:45:29 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 17:45:39 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:11:33 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:12:04 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:14:50 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:01 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:14 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:25 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:36 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:47 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
       Mar 21 18:15:58 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
    Daemons
       com.adobe.fpsaud
    com.apple.installer.osmessagetracing
       com.apple.watchdogd
       com.apple.webcontentfilter.dns
    com.apple.webcontentfilter.proxy
    com.backblaze.bzserv
    com.microsoft.office.licensing.helper
    com.oracle.java.Helper-Tool
    Agents
    com.adobe.AAM.Scheduler-1.0
    com.adobe.AdobeCreativeCloud
    com.apple.AirPortBaseStationAgent
    com.apple.CSConfigDotMacCert-EMAIL-SharedServices
       -        status: 78
    com.apple.MailServiceAgent
       -        status: -9
    com.apple.photostream-agent
    com.backblaze.bzbmenu
    com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
    com.google.keystone.user.agent
    com.oracle.java.Java-Updater
    com.spotify.webhelper
    User overrides
    com.spotify.webhelper
    User login items
       iTunesHelper
       -        /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
       Dropbox
       -        missing value
       Dropbox
       -        /Applications/Dropbox.app
       Spotify
       -        /Users/USER/Applications/Spotify.app
    Parental Controls: On
    iCloud errors
       bird 10
    User caches/logs
       2460 MB: /var/folders/_k/0v69f20n1d1cvbvxgx1n5pqr0000gn/T/../C/com.apple.appstore/497799 835/auz525701185588361121.pkg
    Restricted files: 67
    Lockfiles: 5
    Accessibility
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
       -        mod date: Sep 25 21:48:29 2014
       -        checksum: 3284129377
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.oracle.java.Java-Updater</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
                            <string>-bgcheck</string>
                </array>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
                <key>StartCalendarInterval</key>
                <dict>
                            <key>Hour</key>
                            <integer>21</integer>
                            <key>Minute</key>
                            <integer>48</integer>
                            <key>Weekday</key>
                            <integer>6</integer>
                </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.backblaze.bzserv.plist
       -        mod date: Jan  4 09:17:45 2015
       -        checksum: 509978751
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>Label</key>
                <string>com.backblaze.bzserv</string>
                <key>OnDemand</key>
                <false/>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <true/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Backblaze.bzpkg/bzserv</string>
                </array>
       </dict>
       </plist>
    Contents of /System/Library/Security/authorization.plist
       -        mod date: Jan  7 22:31:13 2015
       -        checksum: 2720110640
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>comment</key>
                <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used.  Note that the right will only match wildcard rules (ending in a ".") during this reduction.
       allow rule: this is always allowed
    &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
    &lt;string&gt;allow&lt;/string&gt;
       deny rule: this is always denied
    &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
    &lt;string&gt;deny&lt;/string&gt;
       user rule: successful authentication as a user in the specified group(5) allows the associated right.
       The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
       The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
       The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
       See remaining rules for examples.
       </string>
                <key>rights</key>
                <dict>
                            <key></key>
                            <dict>
                                        <key>class</key>
                                        <string>rule</string>
                                        <key>comment</key>
       ...and 1850 more line(s)
    Contents of /private/etc/authorization.deprecated
       -        mod date: May  4 08:33:31 2014
       -        checksum: 3586269056
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>comment</key>
                <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used.  Note that the right will only match wildcard rules (ending in a ".") during this reduction.
       allow rule: this is always allowed
    &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
    &lt;string&gt;allow&lt;/string&gt;
       deny rule: this is always denied
       &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
    &lt;string&gt;deny&lt;/string&gt;
       user rule: successful authentication as a user in the specified group(5) allows the associated right.
       The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
       The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
       The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
       See remaining rules for examples.
       </string>
                <key>rights</key>
                <dict>
                            <key></key>
                            <dict>
                                        <key>class</key>
                                        <string>rule</string>
                                        <key>comment</key>
       ...and 9715 more line(s)
    Contents of Library/LaunchAgents/com.apple.CSConfigDotMacCert-EMAIL-SharedServices.Agent.pl ist
       -        mod date: Jul  4 12:46:57 2012
       -        checksum: 533325579
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <false/>
                <key>Label</key>
                <string>com.apple.CSConfigDotMacCert-EMAIL-SharedServices</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>LowPriorityIO</key>
                <true/>
                <key>Nice</key>
                <integer>10</integer>
                <key>ProgramArguments</key>
                <array>
                <string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
                            <string>-l</string>
                            <string>/Users/USER/Library/Logs/CSConfigDotMacCert.log</string>
                            <string>-u</string>
                            <string>EMAIL</string>
                            <string>-t</string>
                            <string>SharedServices</string>
                            <string>-s</string>
                </array>
       ...and 4 more line(s)
    Contents of Library/LaunchAgents/com.backblaze.bzbmenu.plist
       -        mod date: Mar 21 22:27:38 2015
       -        checksum: 2263925454
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.backblaze.bzbmenu</string>
                <key>OnDemand</key>
                <false/>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <true/>
                <key>ThrottleInterval</key>
    <integer>60</integer>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Backblaze.bzpkg/bzbmenu.app/Contents/MacOS/bzbmenu</string>
                </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.google.Chrome.framework.plist
       -        mod date: Mar 21 22:27:36 2015
       -        checksum: 756479441
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <dict>
                            <key>SuccessfulExit</key>
                            <false/>
                </dict>
                <key>Label</key>
                <string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>Program</key>
                <string>/Applications/Google Chrome.app/Contents/Versions/30.0.1599.101/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Applications/Google Chrome.app/Contents/Versions/30.0.1599.101/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
                            <string>--type=service</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>Sockets</key>
                <dict>
                            <key>ServiceProcessSocket</key>
       ...and 7 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
       -        mod date: Mar 14 09:44:53 2015
       -        checksum: 2488905946
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.google.keystone.user.agent</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>ProgramArguments</key>
                <array>
                  <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
                  <string>-runMode</string>
                  <string>ifneeded</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>StartInterval</key>
                <integer>3523</integer>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.perceptiveautomation.IndigoServer2.plist
       -        mod date: Oct 26 09:30:17 2013
       -        checksum: 2983990586
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.perceptiveautomation.IndigoServer2</string>
                <key>KeepAlive</key>
                <false/>                     <!-- Would like to use true, but we want to keep the IS process alive, not the /usr/bin/open command. -->
                <key>RunAtLoad</key>
                <true/>
                <key>ProgramArguments</key>
                <array>
                            <string>/usr/bin/open</string>
                            <string>-a</string>
                            <string>/Library/Application Support/Perceptive Automation/Indigo 6/IndigoServer.app</string>
                </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.spotify.webhelper.plist
       -        mod date: Mar 21 22:27:44 2015
       -        checksum: 2571105998
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
    <key>Label</key>
    <string>com.spotify.webhelper</string>
    <key>KeepAlive</key>
        <dict>
    <key>NetworkState</key>
         <true/>
        </dict>
    <key>RunAtLoad</key>
        <true/>
    <key>Program</key>
    <string>/Users/USER/Library/Application Support/Spotify/SpotifyWebHelper</string>
    <key>SpotifyPath</key>
    <string>/Users/USER/Applications/Spotify.app</string></dict>
       </plist>
    Bundles (new)
       /Applications/Disk Doctor.app
       -        com.fiplab.diskdoctor
    /System/Library/StagedFrameworks/Safari/JavaScriptCore.framework
       -        com.apple.JavaScriptCore
    /System/Library/StagedFrameworks/Safari/Safari.framework
       -        com.apple.Safari.framework
    /System/Library/StagedFrameworks/Safari/Safari.framework/Versions/A/XPCServices /com.apple.Safari.SearchHelper.xpc
       -        com.apple.Safari.SearchHelper
    /System/Library/StagedFrameworks/Safari/Safari.framework/Versions/A/XPCServices /com.apple.Safari.SocialHelper.xpc
       -        com.apple.Safari.SocialHelper
    /System/Library/StagedFrameworks/Safari/Safari.framework/Versions/A/XPCServices /com.apple.Safari.WebFeedParser.xpc
       -        com.apple.Safari.WebFeedParser
    /System/Library/StagedFrameworks/Safari/WebCore.framework
       -        com.apple.WebCore
    /System/Library/StagedFrameworks/Safari/WebInspector.framework
       -        com.apple.WebInspector
    /System/Library/StagedFrameworks/Safari/WebInspectorUI.framework
       -        com.apple.WebInspectorUI
    /System/Library/StagedFrameworks/Safari/WebKit.framework
       -        com.apple.WebKit
    /System/Library/StagedFrameworks/Safari/WebKit.framework/DatabaseProcess.app
       -        com.apple.WebKit.DatabaseProcess
    /System/Library/StagedFrameworks/Safari/WebKit.framework/NetworkProcess.app
       -        com.apple.WebKit.NetworkProcess
    /System/Library/StagedFrameworks/Safari/WebKit.framework/PluginProcess.app
       -        com.apple.WebKit.PluginProcess
    /System/Library/StagedFrameworks/Safari/WebKit.framework/Versions/A/XPCServices /com.apple.WebKit.Databases.xpc
       -        com.apple.WebKit.Databases
    /System/Library/StagedFrameworks/Safari/WebKit.framework/Versions/A/XPCServices /com.apple.WebKit.Networking.xpc
       -        com.apple.WebKit.Networking
    /System/Library/StagedFrameworks/Safari/WebKit.framework/Versions/A/XPCServices /com.apple.WebKit.Plugin.32.xpc
       -        com.apple.WebKit.Plugin.32
    /System/Library/StagedFrameworks/Safari/WebKit.framework/Versions/A/XPCServices /com.apple.WebKit.Plugin.64.xpc
       -        com.apple.WebKit.Plugin.64
       /System/Library/StagedFrameworks/Safari/WebKit.framework/Versions/A/XPCServices /com.apple.WebKit.WebContent.xpc
       -        com.apple.WebKit.WebContent
    /System/Library/StagedFrameworks/Safari/WebKit.framework/WebProcess.app
       -        com.apple.WebProcess
       /System/Library/StagedFrameworks/Safari/WebKit2.framework
       -        com.apple.WebKit2
    /System/Library/StagedFrameworks/Safari/WebKitLegacy.framework
       -        com.apple.WebKitLegacy
    /System/Library/StagedFrameworks/Safari/WebKitLegacy.framework/WebKitPluginHost .app
       -        com.apple.WebKit.PluginHost
    /Users/USER/Applications/Spotify.app
       -        com.spotify.client
    App extensions
    com.getdropbox.dropbox.garcon
    Installations
        Garmin Communicator Plugin 12/25/12
        PlugIn 12/15/12
        PlugIn 11/3/12
        Microsoft AutoUpdate for Mac 7/4/12
        Microsoft Office for Mac 2011 7/4/12
    Elapsed time (sec): 756

  • Using Sansung S3, not yet possible to share all the open tabs (using NFC) with another NFC phone. But only the one main tab I am currently browsing is possible.

    Using Sansung S3, Android 4.1.2, Firefox 24.0; not yet possible to share all the open tabs (using NFC) with another NFC phone. But only the one main tab I am currently browsing is possible to share. Is this the feature of current NFC feature of Firefox?
    If so, when will there be feature to share all the tabs?
    Thanks.

    I'm not sure if we will implement this. Sharing all the tabs you have open have many more security and privacy issues. Someone forgets that they had a tab open they did not want to share or miss-clicks on the share all option.
    We are looking into better ways to share tabs with devices that are nearby. Especially if they are on the same WiFi network.

  • I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    You may have t opurchase one.  Some only do a limited number of transfers without paying.
    - Make a backup of yur iPod by connecting the iPod to the computer and right clicking on the iPod under devices in iTunes and selecing Backup.
    - Restore the iPod from that backup.

  • I have purchased a film bundle but only had one film download

    I have purchased a film bundle but only had one film download

    Look under the Store menu in iTunes for the "Check for available downloads" command and select that. You may find the other items there to be downloaded. If not, check the Purchases area of the iTunes Store and you may be able to download the missing items there:
    http://support.apple.com/kb/ht2519
    If not, go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to report the issue to the iTunes Store.
    Regards.

  • I want to install an app but only for one user on my imac with Lion

    I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

    Setup of iWork in your wife's account should only occur the once.
    Updates can be performed through your account and are usually performed via Software Update.
    Messages should not be popping up in your wife's account if all the iWork updates have been performed.
    Go to Software Update and download and install all the iWork updates.
    Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

  • I purchased Adobe XI for a year.  I am charged monthly on my credit card.  The software only allows one print file to pdf  after that it has a pop up marketing screen asking me to purchase it again.  If I reboot I can get another print out of it.  After a

    I purchased Adobe XI for a year.  I am charged monthly on my credit card.  The software only allows one print file to pdf  after that it has a pop up marketing screen asking me to purchase it again.  If I reboot I can get another print out of it.  After an hour of trying to reach somone on tech support I ran across this forum.  Any help out there?

    In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.

Maybe you are looking for

  • Bank clearing acc

    hi, may i know why need to use bank clearing account instead of directly charge to bank account? for example when receive vendor payment, DR bank clearing CR vendor. what happen to bank account? how's the double entry to update to bank account? later

  • Error:Page not found or not available in Guided Procedure

    Hi All, i have created one GP process for input form. i am able to run the process from Design time, but when i am trying to run the process from the Runtime or after creation of iView/Page i am getting an error Page not found or not available . Help

  • Problems with creating dvd

    This is my first mac. I am trying to create a dvd with pictures. I created the slideshow fine. I added the song from itunes fine. when I try to preview the project, a message comes up saying that my computer is not authorized to play this song. I go

  • Download error. Press Retry to try again or contact customer support. (403)

    application manager won't load

  • PRFI -Error Msg Non-Postable Trips

    Hi, Iam getting an Error  message as " Non-Postable Trips" in Posting Run  PRFI No entry in table T030 for argument 6520 HRT 140 No entry in table T030 for argument 6520 HRT 160 No entry in table T030B for argument HRT Trip could not be included in p