Stream type is invalid for one PC not other

One of my 4 PC's with Premiere CS6 is now exporting MPEG-2 videos files that can't be loaded into Encore CS6. A window pops up in Encore that states "Stream type is invalid" but it does load the associated AC3 audio file. I've been using CS6 since it was released and export MPEG-2 files to make DVD's for almost all my projects and never had this happen. I also loaded a recent project on this same PC that I made a DVD from and it will load that old MPEG-2 file into Encore but if I re-export the MPEG-2 file now with the same export settings, the MPEG-2 video will not load into Encore and the "Invalid" window pops up. Any ideas?
Just to add to this. I took the MPEG-2 file from that PC and was able to load it into Encore on one of my other PC's so it looks like an Encore problem specific to that one PC only. Reinstall Encore?
Now when Premiere CS6 exports MPEG-2 DVD files it also creates 2 support files that have info like where the chapter points are. When I copied just the video tile to a new folder without the 2 support files, I was able to load that video file into Encore. Problem with that is I need those support files since I have chapter points added in Premiere. Did a recent update make Premiere CS6 no longer compatible with Encore CS6 since Adobe did change these how these support files are made in CC?
Both PC's have the same/latest version of Premiere and Encore CS6 installed yet I was able to load the exported MPEG-2 video with the 2 support files into Encore on the 2nd PC and see the chapter points in the Encore timeline but still shows it as an invalid stream on the 1st PC.

So I transferred the entire Premiere project over to one of my other PC's loaded it and exported the MPEG-2 file with the same export settings since it was saved with the project. This MPEG-2 file & xmp's loaded into Encore no problem with all the chapter points so I then transferred that MPEG-2 folder with the xmp files and loaded it into Encore on the problem PC and it also loaded fine.
I did try and load the MPEG-2 file and xmp's exported by the problem PC into Encore on the other PC and it wouldn't load. So I guess what is happening is that Premiere on the problem PC is exporting a bad combo of MPEG-2 and xmp files.
Re: Premiere CC Chapter markers not frame accurate in Encore CS6

Similar Messages

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Can I enable pof serialization for one cache and other JAVA serialization

I had coherence cluster with few cache , Is there any way i can enable pof serialization for one cache and other to use normal JAVA serialization

839051 wrote:
I had coherence cluster with few cache , Is there any way i can enable pof serialization for one cache and other to use normal JAVA serializationHi,
you can control serialization on a service-by-service basis. You can specify which serializer to use for the service with the <serializer> element in the service-scheme element corresponding to the service in the scache configuration file.
Be aware, though, that if you use Coherence*Extend, and the service serializer configuration for the proxy service does not match the serializer configuration of the service which you are proxying to the extend client then the proxy node has to de- and reserialize the data which it moves between the service and the client.
Best regards,
Robert

How do I put a link for one of my other pages I've created on the same site

How do I put a link for one of my other pages I've created on the same site

If it's a text based link select the text and go to the Inspector/Link/Hyperlink pane and select One of my pages option:
Click to view full size
Or use the navbar that iWeb creates at the top of each page. Go to the Inspector/Page/Page pane and make sure the navbar is activated for each page.
Click to view full size
OT

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Drill Through to HFM Works for One Location, Not Another - Same Adapter

Good morning all -
I have two locations that both use the same adapter to load to the same HFM application. One location produces the drill through files, one does not.
I've seen several posts about needing separate applications for multiple adapters, but surely this doesn't apply if the adapter is the same? Am I missing a location specific setting somewhere?
Thanks in advance,
Sarah

This was a stupid mistake on my part. I looked through the output and never saw the A, B, C files get produced, so I assumed it never worked. I failed to notice that we had also always had .err files, which prevents drill through files from being created. I answered my own question on the phone with Oracle support. :)
Thanks for your response.

Java update for one, but not the other ML installation

I have two ML installations (one mbp, the other a mac mini). Recently with the Java scare, I disabled Java on both.
Only the mbp offered me to update Java to the (presumably) fixed version, while on the mac-mini 'Sofwtare Update' does not
offre me the update.
How can I check my java install.
Also, what is the suggested version of Java, Apple's or Oracle's?

How can I check my java install.
The Java preference pane, for Oracle's JRE, and Software Update for Apple's.
Also, what is the suggested version of Java, Apple's or Oracle's?
They do different things. Oracle's JRE is a web plugin for running applets and WebStart applications. Apple's JRE is a framework for running standalone applications.

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

IMAP Working for some but not others

I am having the issue of imap working for some users and not others. I have for instance 2 users both accounts the same. One account I can link via imap the other I can not. Both have the same group memberships, both are in the same post office. Everyone has imap access I have no restictrions set. Any idea where I should begin to look. The message I am receiving on the account the can get in is: user does not exist.
Thanks

gator17,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Can the stroke on type knock out specific layers but not others?

I'm mainly an Id and Photshop person but I've been asked to do some maps for a publication we're putting together.
I'm probably being fussy but I've come up against a question that I'm just unable to resolve with the knowledge I have. Searching on forums hasn't helped either.
Anyway, this is what I've got:
The grey background, type, stroke on type and the islands are all on different layers.
What I want to end up with is the stroke on the type knocking out the black outline stroke on the islands but being invisible over the grey background, like so:
Does anyone have any ideas?

You can get that if you're willing to work with a duplicate of the country shapes.
See:
http://www.m-server.de/m_g/Knockout-cs5.ai
All relevant appearances are applied at layer level. Target the layer in the layer panel and see appearance panel for the options.

Open in Camera raw grayed out for some tifs not others, bridge

I searched but could not find a solution. CSR. PC. Windows xp. In CS4 Bridge the option to open with Camera raw is grayed out in the file menu for some tifs and not others - It shows up grayed out on the file menu, but doesn't show at all when right clicking, even with the files where open with camera raw is not grayed out in the file menu. I have purged the cache, deleted all temp files, closed both bridge and photoshop and still I cannot open the tif in camera raw. It is grayed out. If I go to the pic I touched up yesterday the option is not grayed out. Does anyone know how I can fix this?

RJ Dougall wrote:
My intent is to batch process in Camera Raw -- my preferences have always been set to use camera raw for TIF and JPG files, and I have never had a problem accessing Camera Raw either directly in PhotoShop itself, or Bridge.
Please e-mail me a copy of your response to [email protected]
Uh, this is a forum...not an email tech support organization...
As for your issue, it's simply not clear what you are doing or what issue you have. Can you not open the scanned images via Camera Raw from within Bridge? If you can then you will need to go through each image and adjust the ACR settings before you would be able to process them. Depending on how you set up your actions, Photoshop's Batch may or may not catch settings...that part is pretty complicated.
Also, I would question your use of JPEGs vs TIFFs. I would suggest scanning as 16 bit TIFF and running those through Camera Raw...you will be loosing a lot to scan into 8 bit JPEG and then re-running through Camera Raw. You really want to be sending ACR 16 bit images...

Beginning recently, cannot load certain websites (Google)(interrupts while loading) (Google, etc.) from one identity, not other user, on Mac OS10.

I am getting interrupted while loading message when I try to load many websites, Google, etc
Apple OS, Google Mail, and Firefox all updated recently. Cannot open Firefox.com either
Am using other identity to contact you, and it works fine for all the sites

I am getting interrupted while loading message when I try to load many websites, Google, etc
Apple OS, Google Mail, and Firefox all updated recently. Cannot open Firefox.com either
Am using other identity to contact you, and it works fine for all the sites

Color HP LJ CP3525N printing slow on network for one but not another

This one hasn't been touched upon that I have notced. I currently have a Color LaserJet CP3525N setup on Server 2003 R2 with PCl6 drivers being used. This just started occuring for people on the same subnet as this printer. The print jobs go very slow and print a single page about ever 3 minutes. If I print to the printer with the same drives setup from the same server it prints with no delay. My system is a Windows 7 64 bit and the other systems are also Windows 7 64 bit as well. Before this week it was printing for many months with no problem. This printer is used quite often and I am now being stopped from my daily work and having to have the files emailed to me to print. I have searched other forums and threads and notbody else seems to have this issue. I have stopped and started the printer spool on the Server and that didn't make any difference. The server it is on is the main one we use to share out all of our network printers. Any thoughts or ideas? I have also replaced the 4 toners to see if that resolved anything as suggested by others and still not dice at this point.
Thanks in advance,
Marcus

Did a fresh install and still having the same problem. Giving up now. Mod can now close this thread

Windows XP3 Firefox works for one use, not another.

Using windows XP SP3 and latest Firefox. On normal user Fire fox suddenly will not load. Click on Icon and it seems to load but does not appear on desktop. Looking in Windows Task Manager it looks like ti is running. Never appears open on desktop
On user "Admin", it boots and works normally. BOTH Admin and other user are admin security levels.
I have downloaded and installed the latest update but no change.
Thunderbird works normally on all users. There are only two user names on this machine. My problem is with another machine. I have compared some settings from this one to the faulty on and found no noticable differences.

Occasionally the Firefox window will get off screen. Here are three different
approaches to getting that window into view. One of them should work! 
'''''Firefox Window "off screen" — Arrow Key Method''''' 
If you know that Firefox is off to a particular side, you can use the arrow keys
to move it back on screen. You only need to move it far enough to be able to
click the title bar and then you can drag it the rest of the way. 
Make the Firefox tile active on the task bar and press this key combination
to start moving the window: 
Alt+Spacebar > m 
(To clarify, that's Alt+Spacebar to open the window control menu, then the
letter m to start moving the window.) 
Press the arrow key for the direction you want to move the window, e.g., press
the left arrow key to move the window left. Press the Enter key to complete the move. 
'''''Firefox Window "off screen" — Maximize + New Window Script Method''''' 
If Firefox is nowhere to be found but you know it's out there, try this method.
Make the Firefox tile active on the task bar and press this key combination to
maximize the window: 
Alt+Spacebar > x 
(To clarify, that's Alt+Spacebar to open the window control menu, then the letter
x to maximize the window.) 
If that works, try this: 
(1) Copy the following line of code to the clipboard (it's all one line...): 
newwin=window.open(window.location.href, "_blank", 
"width=640,height=480,menubar,toolbar,personalbar"); 
newwin.moveTo(0,0); 
(2) In the maximized window, press Ctrl+Shift+k to open the web console. 
(3) Press Ctrl+v to paste the line of code next to the caret (») then press Enter to run it.
A new copy of that page should open in a window positioned at the top left of the screen. 
(4) Switch back to the maximized window and close it first, before doing anything
in the new window. 
'''''Firefox Window "off screen" — Remove Settings File''''' 
If you can't move or maximize Firefox, you can rename or delete the settings
file that stores the last window position. 
(1) Open your currently active Firefox settings folder (AKA Firefox profile folder).
From the Start menu (Run box or search box), paste this into the search box and press Enter:
 %APPDATA%\Mozilla\Firefox\Profiles 
This should open a window showing one or more Firefox profile folders. If you have multiple
folders, look for the most recent. Click into your profile folder. 
(2) If Firefox is still running, right-click it on the Task Bar and Close all Windows. 
(3) Wait a few moments for Firefox to finish updating files in your profile folder, then rename
'''''localstore.rdf''''' to something else, like localstore-bad.rdf or localstore.old.
Alternately, you can delete the file. 
(4) You're done with your profile folder and you can restart Firefox now.

Web Services Returns Runbook Not Found For One User, Not for another

i am using Web Service to start runbooks. most users are successful. but one user gets an error "runbook not found". the IIS logs show identical requests to the web service, except for the different username. the user
is an administrator on the machine and is a member of the OrchestratorUsersGroup. is there some other group that the user should be a member of to run web services?

Maybe the user has deniad Access to the Runbook, check in Runbook Designer.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Stream type is invalid for one PC not other

Similar Messages

Maybe you are looking for