Stream Video/Audio from One room to a TV with Apple TV

Hi: I two rooms in a church. 1st room is where the events happen. 2nd room is a overflow room. I have a TV in 2nd room with Apple TV. I want stream video and Audio from Room1 to ATV in room2. Can I do this with Ipad or someother device?
TIA
Ravi

Hi rafromffx,
You can use AirPlay to stream content from an iPad to your Apple TV. See this article for how to do it and the requirements -
Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • I stream video/audio from my iPhone to AppleTV and it works fine. I want to use headphones on the iPhone so I can stream the video and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one.

    I stream video/audio from my iPhone to AppleTV (like YouTube) and it works fine. I want to use headphones on the iPhone so I can stream the video to AppleTV and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one. How can I watch AppleTV and listen on the headphones?
    Thank you.

    have the same problem. Im using iPad 3 and Apple TV. id like to use the ipad as wireless earphones while i watch the video on the tv. is that even possible?

  • Stream video/audio from external hard drive to apple tv and/macs

    I would like to purchase an external hard drive, connect it to my TC and stream video/audio to my apple tv (2gen) and Macbooks. What is the best way to do this?

    http://lifehacker.com/software/itunes/ultranewb--how-to-move-your-itunes-library -to-an-external-drive-238296.php
    http://lifehacker.com/software/itunes/move-itunes-to-another-computer-and-keep-l ibrary-data-intact-229747.php
    from
    http://www.google.dk/search?source=ig&hl=da&rlz=&q=moveitunes+library&btnG=Google-s%C3%B8gning&meta=lr%3D&aq=0&oq=moveitune

  • I want to use the audio from one of my clips and the video of another can I do this?

    I have two different video clips that I took from my still camera. I want to use the audio from one of the clips and the video from the other at the same time in imovie can I do this and if yes how

    Yes.
    First go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now, drag the clip with the Video into the project.
    Drag the clip with the Audio and drop it on the first clip at the frame where you want it to begin. A popup menu should appear. Choose Audio Only. You may then want to open Inspector for the video clip (by clicking the little gear icon at the top left of the clip) and going to the audio tab. Here you can turn down the volume of the video clip, so that all you hear is the audio clip.
    Another way. Put the video clip that has the Audio you want in first. Then drag the clip with the video you want and drop it on the clip that has the audio you want. A popup menu will appear. Choose CUTAWAY.

  • Audio from one event posting to another video?

    I'd like to use audio from one event and use it for the audio of another movie. I've done it before, but simply can't find the info or remember just how I did it last time. Does anyone know how to do this?

    ooooh, I figured it out! Sorry for the posting.

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • I took a video with my iphone5 and I don't see it on my iPad. Can videos go from one device to another with iCloud?

    I took a video with my iphone5 and I don't see it on my iPad. Can videos go from one device to another with iCloud?

    No.  Photo stream only streams photos, not videos.  To transfer videos between your devices you can either import them to iTunes and sync them, or (more conveniently) use an app like PhotoSync or Bump.

  • When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

    When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

    I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
    But then again, in my old version, I can't play two clips at once.  But I figure if the newer FCP allow you to do that, then that's what I would do.

  • Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

    As the title says,
    I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
    Anyone encounter this problem before or have any suggestions?
    Thanks!

    Mr. Jefferson, Thanks for the quick response!
    A mystery!  Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks.  Some questions:
    Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
    I have both fios tv and internet
    You said 2 cables are going from your router to a box in the wall.  What are the 2 ports labeled on the router?
    One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
    Is there any labeling on the jacks on the wall box?  On the other box in your room?
    On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
    Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is?  Somewhere these cables have to terminate.
    I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
    Hope this info helps!

  • Autosync - Sync Detection Problem with Video/Audio from different sources

    Hi,
    i've got the following problem:
    I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
    If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
    Is this a bug ?
    Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
    I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
    Thanks for help !

    I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
    As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
    Thanks again for your help.

  • In-ear headphones playing audio from one side only

    My apple in-ear headphones only play audio from one side.  I've tried replacing the cap and mesh; and also tested the headphones on different devices and still get the same problem.  Any advice?

    Probably time to have them replaced.
    B-rock

  • Suggestions for blending audio from one clip to next?

    I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
    Thanks.

    You can create a crossfade (essentially an
    audio dissolve) from one audio clip to another.
    With the audio track(s) targeted, park the Playhead at the
    audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
    You need to be sure you have sufficient 'handles'
    on both clips to accommodate the crossfade.
    Creating an audio crossfade
    http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

  • When will the ability to transfer seamlessly between apple Tvs be available?  I want to be able to move from one room with an Apple TV to the other, and easily transfer a movie or tv show.

    When will the ability to transfer seamlessly between apple Tvs be available?  I want to be able to move from one room with an Apple TV to the other, and easily transfer a movie or tv show.

    No one here can answer the question (if or when that might happen). We are users here and do not speak for Apple. In fact, it violates the TOU to speculate about future Apple plans.
    Barry

  • Can you cut multiple video parts from one video?

    Hi.
    So like, I have 40 minutes long video. I want to cut this video in 20 parts. Do I have to cut every part separately and save project and than export .avi and do this 20 times for 20 parts, or am I able to mark 20 small video parts from one video in 1 project?
    You know, I want twenty 2 minute long videos from 40 minutes video, but I want to find a way how to do it in 1 project, so I can put that project over Media Encoder and go to coffee meanwhile encoder is working.
    Thanks,
    Jackie Chan

    Hello sir. Thank you for fast response. I will check Encore on youtube if you think it is the way this should be done.
    Hm, I found some topics which say you can't even cut in Encore, that you need Premiere.
    Hm, can you provide some tutorial for Encore to show me how to do this sir?
    Thank you

Maybe you are looking for