Streamclip/easy setup settings for purchased clips

I have some purchased clips that I would like to edit in FCE. The settings from the QT inspector are:
Format: photo JPEG, 1920 x 1080, millions
FPS: 30
Data Size: 321.4 MB
Data Rate: 171.37 Mbit/s
Current Size: 478 x 269 pixels
If I convert in streamclip to QT for editing in FCE, which compression should I used, and what other settings should I use?
Also, which easy setup in FCE would be correct?
I will eventually be exporting this to QT so that I can run the video through a mac to a projector.
Bob

What version of FCE are you using?
Is there any other media, or just the stock footage?
Most likely you want to convert to QuickTime using the Apple Intermediate Codec at 1920x1080 at 29.97fps.

Similar Messages

System settings for purchasing organization PO01 incomplete

Hi!
I've been doing a vendor evaluation but I got this message: System settings for purchasing organization PO01 incomplete. Kindly assist me where in SPRO can I fix this. Thank you.

hi,
Define Purchasing Organization data for vendor evaluations in transaction OMGL.
Hope it helps..
Regards
Priyanka.P

System settings for purchasing organization 1000 incomplete

I have done Vendor evalution setting for one purchase organization.
then i went to t.code : ME61 For maintain vendor evalution while doing i got error message like " System settings for purchasing organization 1000 incomplete ".
Please anyone help me out in this

Hi
Which Criteria you are evaluating standard or custom?
If you are doing Vendor Evaluation for Purchasing Org 1000, you need to complete the assignment of Criteria, Sub-criteria, Weighing keys and Maintain Purchasing Organization data.
Thanks
Prashanth

TL-WR740N easy setup assistant for ibook macintosh g3

TL-WR740N easy setup assistant for ibook macintosh g3

Is this a question?
Which operating system version is it running?
I see from a web search (finally) that the thing to which you are referring is a wireless router. Have you checked the manufacturer's own support site since they are the ones who would really know the most about it?
http://www.tp-link.com/en/products/details/?model=TL-WR740N#spec
Message was edited by: Limnos

What settings for new clips in my project?

I have some new clips that I need to add to an existing project. The info for the existing project is
DV PAL anamorphic preset and the footage that has been imported and editited to the project was taken from my standard def DVD's and exported to quicktime using MPEG streamclip with these settings
*Compression: Apple DV-PAL*
*Frame-Size: 720x576*
*Frame-Rate: 25*
*Sound: Uncompressed Stereo 48kHz*
I have some new clips to add, which are HD and this is the info
Video Tracks:
h264, 1280 × 720, 30 fps, 9.69 Mbps
Is it best to use the same MPEG streamslips settings and export to Quicktime as per the original footage or is there a better way to preserve the higher quality of the HD file that will still work with the original footage in the project?
Many thanks

I have followed the steps above but the quality is noticably worse than the rest of my footage in the project. I wonder if I am doing it correctly or if I should start a new project?
I export from mpeg streamclip to Apple DV/DVCPRO NTSC :Quality 100% 30 Frames Frame size 720 x 480
I then use JesDinterlacer to perform the standards conversion. I select output then export to quicktime movie and use these settings

Easy setup setting for NXCAM 1920x1080 25p/50i

Recently I have "upgraded" from Sony HDV to Sony NXCAM*.
Filming in full HD @ 25p.
When importing the footage into FCP and selecting Easy Setup ProRes 422, I can not select frame rate. The "use" field is greyed out and contains the text "HDV-Apple ProRes 422 1080p24"
As the Easy Setup defines the initial settings of the sequence of a new project, each time I have to change the sequence settings manually to match the NXCAM footage.
Question: is there a way to define a new Easy Setup setting? ... or is there another solution?
regards,
Coen
* HXR-NX5

The NXCAM shoots AVCHD. You don't use Easy Setup, but the Preferences dialog in Log & Transfer and set it to transcode to ProRes LT. That footage will adopt the 25fps frame rate of your source footage.
To set the Sequence correctly, simply drop a clip onto the Timeline. You will see a dialog that asks if you want the Sequence to match the clip properties (you do).

EDI settings for Purchase scheduling agreement

Hello,
We are having one new requirement,
Purchase scheduling agreement created for foriegn or local vendor, the Schedule lines are created or release by MRP run.
After MRP run the schedule lines are going to create , then vendor can get the message though IDOC,
How can we customise the ALE and Idoc settings for above said scenario.

Hi Mahesh
After schedule lines are created for SA we have provision of schedule line release transfer to Vendor , please check whether output determination is feasible with medium as Idoc
Please check
Kishor

Settings for Purchase Order output using services for MM-SUS scenario?

Dear Gurus,
I am configuring the service procurement classic and plan driven procurement for MM-SUS
environment. We are on SAP SRM 7.01/ECC 6 EHP5.
I need to maintain the below settings for PO output:
1. RUN transaction SWETYPV
2. IN the object types field, enter CL_SE_PUR_WF_OUT.
3. In the event field, enter CREATED.
4. In the receiver type field, enter WS53800008.
5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
6. Select the 'Linkage Activated' checkbox.
7. Save your entries.
Similarly, one more entry for the event CHANGED.
However, the system is not allowing me to save the settings.
If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
Could you please help me on how to configure the settings for PO output from ECC system using services?
Any input is highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

Sequence Settings for .mov clips from MPEG Streamclip

I'm converting some DVD clips (from old DVDs I created) that I exported to QT using MPEG Streamclip.
When I put them in the timeline sequence, I have to render everything.
Can I change the sequence settings to avoid this? And can I change the settings of a sequence that already has clips in it?
Thanks.

I set MPEG Streamclip QT Export to:
QT Apple DV/DVCPRO NTSC
Frame Size 720X480 (DV-NTSC)
Quality 100%
http://i44.tinypic.com/29zdhr9.png
I set FCP sequence:
Frame size 720X480 NTSC DV (3:2)
Compressor DV DVCPRO - NTSC
http://i44.tinypic.com/of3h8h.png
I still need to render. And the aspect ration looks squished in a bit. Like I've set something wrong.
What am I doing wrong? How should I change the settings:

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

Problem with populating setup tables for purchasing

I'm working on NW2004s.
Problem: Setup tables are not getting populated for 2lis_02_hdr, 2lis_02_item..
what all i've done so far:
1. Activated Data Sources in RSA5.
2. In LO Data Extraction, all the extract structure are active. (btw in job control i'm not sure what it does, i did make job parameter start date immediate, didnt set the print parms, schedule job gives an error.. anything here i may be messing it up?)
3. In SBIW initialization Deleted the contents of setup table and executed the 'Purchasing - perform setup'.
4. In NPRT i can see the log, the name of the source table EKKO, duration of run is 0.0 and no of docs 130.
5. In RSA3 for 2lis_02_hdr extraction process 0 records.
6. I look at SE11 for 'MC02M_0HDRSETUP' and table contents gives 0 records.
Any help is appreciated what i'm missing why the setup tables are not populating. I went thru the forum and did what was said but no sucess yet. I'm not an expert in SAP BW just been working for a year so pl dont be cryptic, explain u'r answers. Thanks for your time
Mayil

Hi,
All the active datasources will be available in RSA6, after that go to LBWE ,maintain Ex Stru, Maintain DS and make that active, then we go for statistical setup
have you done these things?
Did you put any filters while filling up the setup tables?
what is the transaction you used for Setup.
cheers
RK

Best SD Compressor Settings for DVCPROHD clips shot on P2?

I have DVCPROHD clips shot 720p 60 at 24fps (23.98 fps to be exact). I am cutting this on the latest vers of FCP. I am mixing this with some SD elements. The final product will be SD dvd or tape. I tried DVCPRO NTSC 50 and I am not thrilled with the quality. Should I use DV NTSC instead? Or should I just mix the formats with out using Compressor edit it on a timeline set to SD settings and burn SD dvd without worrying about Compressor?

Did you try using the YouTube preset?

Best export settings for intermediate clips to be further edited later

I shoot AVCHD show-long footage of live performances and then cut it up into individual song clips after making a few touchups like replacing and syncing the audio from the mixing board, etc. I then export these from the work area as individual files so I can work on them later like adding titles, and fade ins and outs, and tweaking the audio further. I then export as final files for whatever purpose I need such as BluRay or DVD chapters, YouTube uploads, etc. The question I have is, what's the absolute best format to export these intermediate files as full 1920x1080 to avoid as much recompression as possible? File size is not too much of a consideration at this point since they're usually only a few minutes long and I want to maintain as much quality as I can. I'm using PP CS4 and PP CS6-trial on a new computer I just built and I'm getting amazingly fast renders and exports compaired to what I'm used to (just had to brag about that)!
Thanks,

MikeAiken wrote:
...what's the absolute best format to export these intermediate files as full 1920x1080 to avoid as much recompression as possible?
Others have answered your direct question. The implied question is about workflow and how to maintain maximum quality. One way is to avoid making an intermediate.
You don't have to work on your footage in separate projects. You can work on separate sequences inside one project. If you do this, you avoid having to create an intermediate and maintain highest possible quality.
What I've done before in similar situations is to create subclips and then create another sequence and work on those subclips there. The subclips reference the original file non-destructively as is PPro's way, so maximum quality is maintained. When you're done adding titles, transitions, audio work, etc. then you just export this sequence just like you normally do.
PPro is a huge and complex program, and there are usually many ways to accomplish the same task. I'm only bring this up as an alternative way of accomplishing this task on the off chance you hadn't thought of it. Clearly, YMMV.

Setup accruals for Purchasing

Hello All,
I have a couple of questions about accruals, our Apps. version is 11.0.2, we have set our Accrue Inventory Items set to On Reciept. We would like to set the Accrue Expense Items to On Receipt also. I have done some research on the issue, but I still have some questions?
1) Currently, in our system the Accrue Expense Item is set to On Receipt. An accrual
expense account has been assigned. To date, to start accruing on our PO's, is the
only step left is to run the GL Import?
2) Since this will be the first time we will be accruing on our PO's, how will this affect
our system?
2) I also read, that it is not a good idea to have both options set to On Receipt? Why? I
have not been able to find much info. on the subject and we must set them up this way.
3) I have also read that there is no intergration between PO and PA, therefore the accruals
can not be recognized in PA. Does anyone have any suggestions on how to get the info.
into PA?
Any infornmation that you could provide would be great.
Thank you,
Karen

Karen,
WE use accrue on receipt for expenses and noticed the following issues:
1. Accounting incorrect for Invoice price variances (it used the accrual account and not the expense account)
2. Accounting incorrect for Exchange gain and losses between PO Rateand Invoice Rate (same incorrect accounting as uncer 1)
3. On receipts it created at some stage incorrect accounting for non recoverable VAT (this should only affect Europe)
4. You can not do two way matching any more as you would never take the expense as the receipt is not required for two way matching and is required for accounting.
Issue 1,2 and 3 should be resolved if you go to the latest patchset (J), but Issue 4 remains an issue that we have dealt with by not allowing two way matching.
Please also bear in mind that Oracle's accrual write off process will have to be performed for receipts that are not to be invoiced and if you already have performed this process you might know that this process is really labour intensive and accident prone.
It works well if you take the correct business decission and understand the complications, but I would strongly advice you to review the need.
Regards,
Rien Otterman ([email protected])

System settings for purchasing organization --------- incomplete

Dear all,
I am getting above error while doing vendor evaluation.
I have configured all seetings related to criteria & subcriterian.
Still I am getting above error,
Thanks & regards
Gitesh

Hi,
Have you done it as follows :
Select Pur Organization , click on main Criteria - enter new criteria , after maintaining Criteria- select it and click on sub criteria to create Subcriteria , maintain subcriteria and weighting,
select Pur Org and Click on Weighting and maintin weighting key, criteria and weighting
Pl. check this ..there is other setting in Vendor Evaluation as far as Pur Org is concerned.
Regards,
Vikas

Streamclip/easy setup settings for purchased clips

Similar Messages

Maybe you are looking for