Streamclip Settings for Apple 3?

Has anyone used Streamclip to make files for their Apple TV 3?
If so, I am curious to what settings you used as I can't find any.
Thanks!

He is using an input file (from an Hauppauge HDPVR-1212) similar to this:
* * * MediaInfo Mac is ©2010 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: May 12, 2012 5:28:56 PM PDT
Report for file: 20120512_171323.m2ts
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AC3
File Format.......................................MPEG-TS
Play Time.........................................55s 967ms
Total File Size...................................95.6 MiB
Total Stream BitRate..............................14.3 Mbps
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................27
Codec [email protected]
Frame Width.......................................1 920 pixels
Frame Height......................................1 080 pixels
Frame Rate........................................29.970 fps
Total Frames......................................1678
Display Aspect Ratio..............................16:9
Scan Type.........................................Interlaced
Scan Order........................................TFF
Color Space.......................................YUV
Codec Settings (Summary)..........................CABAC / 4 Ref Frames
QF (like Gordian Knot)............................0.213
Codec Settings (CABAC)............................Yes
Codec Settings (Reference Frames).................4
Video Stream Length...............................55s 989ms
Video Stream BitRate..............................13.2 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................88.2 MiB (92%)
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AC-3
Codec (FourCC)....................................129
Audio Stream Length...............................56s 0ms
Audio Stream BitRate..............................384 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................6
Audio Channel's Positions.........................Front: L C R, Side: L R, LFE
Sampling Rate.....................................48.0 KHz
Bit Depth.........................................16 bits
Audio Stream Delay................................387ms
Audio Stream Size.................................2.56 MiB (3%)

Similar Messages

TS1503 In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

You can use 1 unified Apple ID for iTunes so you don't have to repurchase apps. That part is fine.
For iCLoud/iMessage/Facetime you should each have a unique ID so the 2 phones will be separate and you won't accidentally erase each other's content and overwrite settings, nor will you get the others messaages by mistake.

TS5150 With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

Are you using a stereo receiver or surround sound system for the audio by chance. What you are describing sounds like a receiver that is not setup correctly, or does not have the speakers connected to it correctly to support Dolby surround, 5.1 or 7.1. Which is why it is only happening on some content. It would only be on the ones that are encoded to support Dolby audio.

HT5706 where do I find Settings for apple tv?

where do I find "Settings" for Apple tv?

On the main menu there is an icon for settings. It will be at the end in either the first or second row depending on your location.

Does anyone know the settings for apple mail on mountain lion?

does anyone know the correct settings for apple mail?

Configuring Mail for your email account (OS X v10.5 and later)
Apple - Support - Mail Setup Assistant
Mac 101- Mail (OS X Mountain Lion)

Best Streamclip settings for iPhone 4 Video - to edit in FCE

First, the problem: iPhone 4 records HD video in h.264. But Final Cut Express doesn't have sequence settings for editing h.264 or iPhone video clips.
The solution: I'm using Streamclip to convert all of my iPhone 4 videos to a format FCE lets me edit in.
Question: What are the optimal settings to insure that my final output retains quality almost equal to the original video shot on my iPhone? (More specifically, I plan on uploading to Youtube as a HD video).
I've read somewhere that I should convert to Quicktime Movie format, with Apple Intermediate Codec 720p 30fps. Is that the best compression type to convert to for editing iPhone 4 videos in FCE? If so, how should the other settings in streamclip be jiggered? For instance, does it make much difference if I set the Quality slider to 100% (As opposed to the default at 50%?) What about audio compression settings?
(P.S. I think it's very annoying that I can't directly edit a video from iPhone 4 on another consumer Apple product, the FCE. Does FCP let me directly edit h.264/iphone 4 videos?)

The slider makes no difference as AIC is variable bit rate within a specific range. No audio compression in FCE ever. Uncompressed stereo 48k, the video standard sample rate.
It would be truly miraculous if FCE worked with iPhone media as the current version predates it by three years, which in computer lifetimes is two generations, basically the equivalent of your grandfather having developed an app for a smartphone when he was a young man. FCP is a mere year old, well before the iPhone did video. Furthermore, if you'd read the forums, you'd see that H.264 is an acquisition and delivery forward. It is not used in production. The codec is not suitable for efficient production and really should never be used there. It's very unfortunate that camera manufacturers have taken the cheap way out and used this codec, rather than actually developing and using a suitable intraframe production codec.

No settings for Apple Lossless Audio Codec found in Compressor

For archiving reasons I have to convert many audio files to Apple Lossless (ALAC). So I thought it would be easy using Compressor 4 and and a suitable droplet. I was astonished that here are only settings for the following audio formats: AAC, AC3, AIFF, CAF, MP3 and WAV.
No Apple Lossless Codec in the settings?
Does anyone know how to create ALAC files

Thomas A. wrote:
This setting generates a QuickTime file with the extension .mov
Of course it does. Why would that be a problem? "Apple Lossless" is not a file format, it's a codec.
OK, if I change the extension manually to m4a it seems to be an ALAC file, but I am not sure if it a "correct" one in regard to the specifications.
There is no "ALAC" file format specification. What are you going to use the files for?
ALAC isn't specified at all. The audio codec is called "Apple Lossless", and it is a set of algorithms to encode audio data, and a specification for a bitstream of audio data encoded such. It can be put in various containers, the most common being MPEG-4 and Apple Quicktime, but nothing will stop you from using AVI, .mkv, .ogg or anything else as the container format.
If you're unhappy with Compressor, which only seems to offer the QuickTime container format for Apple Lossless-encoded audio, there might be other tools that will transfer it into another container while leaving the actual encoded data untouched.
Since the Apple Lossless codec is now free, mencoder might work, even for the encoding itself. I haven't checked MPEG Streamclip, Handbrake, VLC or others, which might also offer such options.
Quick tests didn't yield any success, but that doesn't mean it shouldn't work.
An alternative for lessless encoding is the "FLAC" (free lossless audio codec), which is usually stored in an ogg container file. I don't think Compressor offers that, although VLC does.
It seems that the exact thing you want is not readily available (i. e. mpeg-4 audio-only with Apple Lossless audio codec.)
Bernd

ITunes looses photo sync settings for Apple TV (1st gen.)

Since the update to the new Photo app on my Mac, iTunes forgets the photo sync settings for my Apple TV (1st. generation, 160 GB HDD).
Every time I open the photo section of the Apple TV sync settings, all the options are turned off. Then I mark a couple of albums and sync the Apple TV >> all album appear on the Apple TV.
But after closing and re-opening iTunes in the photo settings everything is unmarked again. So on every following sync the photos on the Apple TV are easily erased :-( Resync them to the Apple TV takes hours (>30'000 photos!).
All the other sync settings in iTunes remain intact.
Environment:
- MacBook Pro Retina 15" with the latest SW (Mac OS, iTunes, Photo App, etc.)
- Apple TV 1st gen 160 GB HDD

Restarting iTunes resolves the issue in the majority of cases, if it doesn't my second guess would be your security software.
What really seems strange here is that there have been no updates since well before Xmas, so after initially setting it up, the first update would have brought you right up to the most recent (and indeed the very last) .
Agh, how silly of me, I see it's iTunes you have updated.
If that's about all you've changed, you might want to try reinstalling iTunes and bonjour.
Message was edited by: Winston Churchill

Best settings for Apple TV?

Hi gang,
Compressor has a built in preset for Apple TV that produces 1280 x 720 video. This was fine for HDV material, but recently I started to shoot at 1920x1080. Is it possible to convert this type of material for Apple TV? If so, what would be the best settings?
Cheers!

My question is somewhat related to this subject.
I produce HDTV clips with FCP6 cming from XDCAM-EX1 source. After having exported the FCP Sequence into QuickTime movie I go into Compressor and I would like to find the correct setting to be able to read my clip with Sony Play Station PS3. I tried all kinds of settings and the only one which works is the H.264 for Apple TV but its resolution is only 1280x720p.
I am surprised there is so little compatibility between Apple and the Sony PS3.
The PS3 is supposed to read:
MPEG-4 SP (AAC LC)
- H.264/MPEG-4 AVC Main Profile (AAC LC)
AVI
- Motion JPEG (Linear PCM)
- Motion JPEG (μ-Law)
AVCHD (.m2ts)
But only one of the settings provided by Compressor works ! This is terrible.
Can someone suggest a way to convert my Quicktime movie (1920x1080 HDTV) into a file that can be read by the PS3 without loosing so much on the resoltuon?

Gmail exchange settings for Apple Mail?

I would like to use gmail's exchange server settings for quicker mail notifications on the iPhone, but unless I can configure Apple Mail for it as well, read status and such won't sync up. Is there any way to get it to work on the desktop?
Thanks.

Right. Sorry if I wasn't clear initially, but the replied to, etc., status is what I need to sync up. When the iPhone is configured to standard IMAP, that does work. I'll just have to leave it as-is if Apple Mail can't use those Exchange settings.

Optimal HD export settings for Apple TV

I've captured some video from my Canon HV20 and want to view it in the highest quality I can via my Apple TV. If I read the tech specs on the Apple TV it says "H.264 up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats"
But if I export as 1280x720 with AAC-LC (default, at up to 128kps), iTunes/Apple TV isn't happy with the result (ie. it won't transfer it to the Apple TV) saying it can't be played. If I say "Convert Selection for Apple TV" in iTunes I get a new 960x540 MPEG-4 video file which plays fine, but isn't as sharp on my HDTV as I would like.
So what's the magic to render a video that works on the Apple TV from FCEHD at the highest quality?
Thanks....

JFraser wrote:
Then what's the highest bitrate that's actually supported and how much bandwidth will the Apple TV hog from the network at that level?
as per the advertised specs.
Video formats supported
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats

Screen settings for Apple TV.

When I use my iPad on Apple TV, the picture does not fill up the screen. I'm using the 3rd generation iPad with iOS 6.1.2. If I'm watching a movie, I get full screen. When I'm just looking at iPad opening screen, it is much smaller.
Is there some setting I can change to go full screen? Thanks.

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

MPEG Streamclip Settings for Canon 7D

I'm struggling to successfully render the raw Canon 7D video into an acceptable codec for Final Cut Express. I imported the video to my hard drive via memory card. We shot 1080i.
In MPEG Streamclip I use the following settings:
- Export as Quicktime
- Apple Intermediate Codec
- 24fps
- Uncheck interlacing
- Tried both sizes of 1080i and 1920 X 1080 (unscaled), and also unlikely sizes
-Other settings are default
When I import the video into FCE, the monitor says "unrendered." Any help is much appreciated.

Final Cut Express does not support 24fps; never has. If you must work with 24fps material, then you need Final Cut Pro.
To use the material in FCE, you can change the frame rate in MPEG Streamclip when you convert to QuickTime/Apple Intermediate Codec. You will have to experiment to see what the results are. It will be better if you shoot your video in 60i since you are in Canada (an NTSC country).

Streamclip Settings For Multiclip

So I have tried setting it to Apple DV/DVCPRO - NTSC and it will not work in Multiclip and I get no options under RT on my timeline. However if I then export from Quicktime choosing DV/DVCPRO it will work with Multiclip and I get my options under Timeline. Of course converting in Streamclip and then Exporting from FCP and then going back into FCP to edit again with multiclip will take twice as long as it should. So I am wondering what settings in Streamclip will work so not only do I have no rendering to worry about, but the clips will also work just fine with multiclip?

What format are the video clips before you go through MPEG Streamclip?

Default Alert Style notification settings for Apple iOS apps (Banners or Alerts)

As I changed the Alert Style notification settings during the time I wonder what the default notifications settings are for:
- Phone
- Messages
- Reminders
- Calendar
- Photos
Probably it is all Bannersis with non-Apple apps
Thx for your feedback

You can send Apple Feedback here: http://www.apple.com/feedback/

Streamclip Settings for Apple 3?

Similar Messages

Maybe you are looking for