StreamigHow to get audio component of Video out of AirPort/stereo using MBA

Ok will some one help me with this please:
I was experimenting with streaming video. I was watching Leo Laporte's TWiT Live show
http://twit.tv/roz13
where he was talking to Roz Savage the woman who is rowing across the Pacific alone ! This was live feed (including rower's audio from the middle of the ocean); very cool ! Laugh but she is half way to Hawaii and she has already rowed the Atlantic (no sail). The show is called Roz Rows. Leo checks in with her several times a week. Past shows are on iTunes.
Ok I got off track but she is truly awesome in a time when that word is used to describe somebody's socks.
My happy MacBook Air experience to get off the track again: On battery I was watching the live video stream and my iStat showed heat ~55 C and fan 2800 rpm very cool !
I was getting down to 25% battery so I plugged in the charger cable. The temp climbed slowly but predictably to the high heat side of the scale (68 C 6200 rpm) and stabilized. Once again hot but I am happy.
Interesting how cool it was before hooking up charging lead. I am so happy about that !
Now we get to the question ta da !
I want to know how to get the audio for the streaming video to come out of the audio system connected to my Airport Express. Listening to music on iTunes it works fine. Watching an iTunes purchased TV episode on iTunes it _does not_ (the sound comes out of the computer speaker) no matter the setting on the low right hand corner of the window. Perhaps I should be in the iTunes or AirPort discussions but wanted to post positive experience here with streaming video using MacBook Air.

it might be possible using airfoil or similar utility...
http://www.rogueamoeba.com/airfoil/mac/
...but you will probably find that audio/video are badly out of sync due to the latency on the streamed audio
if the video is playing in something like vlc you can compensate by adjusting the audio/video sync (although it is fiddly and drifts because the latency varies) but in itunes you can't

Similar Messages

I bought a component av cable for my ipad2. I get audio but no video. user guide states that it should mirrorthe screen when connected. Can someone please help?

I have an Ipad 2 and I am trying to use the a new component av cable I bought to play hulu on my tv from the iPad 2. I get audio but no video. Can any help?

willyinpr wrote:
...Here you can see "TV OUT", where it says "widescreen" make sure is ON.
I have my iPad Video set to "widescreen", but it didn't make a difference when I briefly tried it with a HDMI connection from my iPad2 to my Samsung TV. The video was letterboxed as was the iPad homepage when it was displayed on my big TV.
I didn't try a streaming video so I don't know if that would be letterboxed or not. I do have a movie on my iPad and I'll give it a try (perhaps tomorrow). If it isn't letterboxed, I'll post it here.
Overall (at least via HDMI), I was very unimpressed with the process. The picture seemed washed out and the resolution certainly suffered. I don't remember what my test video was, but the results were what one would expect with a SD signal. At this moment I don't see any serious usage of this process for me.

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

Thanks but I found my problem. It was easy oncew I found out the flask player was also called shockwave. My shockwave add-on was disabled. I'm not certain what caused the condition. I was good one day and not getting the error messages the next day. But, I know what to look for in the future if it reoccurs. Thanks again.

Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.

I get audio but no video when trying to AirPlay from iPad to apple t.v.

I tried to play from CCTV app to Apple TV I only get audio when I it the airplay button it tells me to double click home button and swipe left select mirror button but that is not there. When I try to play normal movie already on my iPad it works no prob.

Yes, but if the icon is there, then it's been enabled, right? So if you're getting audio and not video, it's enabled, but not working properly. I have enabled apps, and they barely even get chunks of audio. Useless...

I get audio but no video unless I play the file from UTube

I get audio but no video unless I play the file from UTube

Use a different browser?
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.
Even if it's just to redownload the driver. I recommend another browser.

How do I get songs from iPod(video) to iTunes(7 and using VISTA).

How do I get songs from iPod(video) to iTunes(i'm using iTunes7 and Vista).
I don't have the disc, cause i can't find it. But my computer downloaded the ipod, it just cant find the files?
i've been looking through the topics for the past hour and none of them helped. Maybe i'm stupid i dont really know, but i've restored my old computer a couple times and i found a post and it helped both times. now i can't find it anymore.
THIS IS THE ONE I'VE BEEN SEEING AND IT DOESN'T HELP ME ONE BIT:
Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.
Can someone give me a link, or tell me one that shows step by step.

Here is a way of doing it, for another take on this, search the forum for posts by Zevoneer.
Copy from iPod to PC
It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
Once you are connected, you need to set your iPod to manage music manually.
http://docs.info.apple.com/article.html?artnum=61148
If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2586win.html
However this is not allowed for other music.
This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
http://discussions.apple.com/messageview.jspa?messageID=797432
Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
http://www.yamipod.com/main/modules/home/
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
http://www.copytrans.net/
You can find others by Googling: copy iPod to iTunes
There is a useful background article on copying from your iPod here:
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

Where I can get an online solid video toturial training on to use DreamWeaver? Thanks.

Where I can get an online solid video toturial training on to use DreamWeaver? Thanks.

The interface in DW has changed several times since CS6 (12.0) came out. See links below for details on what has changed. Also, you can customize your Workspace.
Workspace overview | Learn Dreamweaver CS6 | Adobe TV
New Features in CS6 12.2
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-creative-cloud-release-feb- 2013.html
New Features in CC 13.0
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-cc-2013.html
New Features in CC 13.1
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-131.html
New Features in CC 13.2
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-13-2.html
New Features in CC 2014 June Release
http://helpx.adobe.com/dreamweaver/using/whats-new-2014.html
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
Nancy O.

I am using MTS files. They load in PE fine. The problem is when I try to play them, I just get audio and no video. I have installed the latest updates. Is there a CODEX that I need.

I have windows 8.1. I have downloaded the mts files from my video camera onto my hard drive. I have loaded a subset of these mts files into premier elements and they show up fine. I can bring them to the time line without a problem. The issue is that when I click on them, I only get the audio and no video. Normally when you click a thumbnail, the picture shows in the large screen. That screen remains blank.

John - thanks for your response
1. Graphics Adapter: Nvidia GeForce GTX 650
2. My driver before you response was 3/4/14   9.18.13.3523. I went to Nvidia and downloaded and installed latest driver 7/2/14 9.18.13.4052
3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
4. Some things I have done to try to resolve the problem.
     a. Searched this forum for a similar problem. I didn't see one.
     b. Did a web search to see if I could find a solution outside this forum
     c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
     d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me. I said yes and here I am.   I seem so close to making it work.   Thanks

How do I get audio from mp4 video to stop playing on other slides? URGENT

I have imported an mp4 video into my Captivate file, and it plays well. But when I get to slides after that one, the audio from the video file repeats on several other slides. How do I get this ugly behavior to stop?
I don't want to unsync the audio and video because it could get out of sync on playback.
Please advise ASAP. I am supposed to be handing this in tomorrow and have spent countless hours doing workarounds on this project already...
Thank you very much for any help you can give me.
Ellen

Hello Ellen,
What is your Captivate version and what option did you choose to insert the video?
If it is Captivate 6, Can you use the Multi Slide Synchonize video. If it is a Previous version, can you select the Video and from properties choose to synchronize with project?
Does the audio play on other slides when you jump from an incomplete video to other slides or when you view the complete video and then move to rest of the slides.
Thanks,
Anjaneai

Cannot import .avi file, I only get audio and no video!

Im trying to import from an SDCard some video taken from a Samsung camcorder to import into iMovie09, when I play it on Quicktime I only get audio. I have tried MPEG Streamclip to convert the .avi file to another format but have not been successful. I used MediaInfo and these are the results:
Can anyone help me find a solution please?
General / Container Stream # 1
Total Video Streams for this File -> 1
Total Audio Streams for this File -> 1
Video Codecs Used -> Samsung MPEG-4
Audio Codecs Used -> U-Law
File Format -> AVI
Play Time -> 10mn 3s
Total File Size -> 161 MiB
Total Stream BitRate -> 2 236 Kbps
Video Stream # 1
Codec (Human Name) -> MPEG-4 Visual
Codec (FourCC) -> SEDG
Frame Width -> 720 pixels
Frame Height -> 480 pixels
Frame Rate -> 29.970 fps
Total Frames -> 18085
Display Aspect Ratio -> 1.500
Video Standard -> NTSC
Scan Type -> Progressive
Codec Settings (Summary) -> BVOP
Codec Settings (Packet BitStream) -> No
QF (like Gordian Knot) -> 0.178
Codec Settings (BVOP) -> Yes
Codec Settings (QPel) -> No
Codec Settings (GMC) -> No warppoints
Codec Settings (Matrix) -> Default (H.263)
Video Stream Length -> 10mn 3s 437ms
Video Stream BitRate -> 1 845 Kbps
Bit Depth -> 24 bits
Video Stream Size -> 133 MiB (83%)
Audio Stream # 1
Codec -> ADPCM
Codec (FourCC) -> 7
Audio Stream Length -> 10mn 3s 400ms
Audio Stream BitRate -> 384 Kbps
Audio Stream BitRate Mode -> CBR
Number of Audio Channels -> 1
Sampling Rate -> 48.0 KHz
Bit Depth -> 8 bits
Audio Stream Size -> 27.6 MiB (17%)
Thanks in advance!

Update to first post.
The Flip Video camcorder records or "captures" video in MPEG-4 advanced simple profile format, saved as an AVI file.
MPEG-4 advanced simple profile format = usually DivX
1.) With Mpeg streamclip you should be able to convert your AVI(Divx) files to a DV format for iMovie. To open DivX files, you have to install one of the free Divx Pro codecs on your system.
MPEG Streamclip 1.8
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
DivX Pro Codec 6.6 (6-month trial)
http://www.divx.com/divx/mac/
2.) Visual Hub $24 should be able to convert WMV and AVI (compressed with the DivX Codec)to a DV format for iMovie.
http://www.techspansion.com/visualhub/
3.) With Flip4Mac WMV Player Pro $29 you can convert your WMV files for iMovie.
http://www.flip4mac.com/wmv.htm
4.) With Perian 0.5 and Quicktime Pro $30 you should be able to convert your AVI/DivX files to a DV format for iMovie.
http://perian.org/
I hope one of these solutions work for you.

Why can't I get video when watching wmv files. I get audio but no video. And yes, I've loaded the latest version of flip4mac.

When I try to play a wmv file on my Mac I get the audio but no video. I've downloaded the latest version of Flip4Mac but that doesn't seem to help. I recently "upgraded" to Lion. Any connection?? Any ideas??? I posted this a week or so ago and was told to download the latest version of Flip4Mac. Let me repeat: I've already downloaded the latest version of Flip4Mac and it doesn't seem to help.

So did you download the latest flip4mac? (just kidding)
Does this happen with all wmv's or just specific wmv files?
Try playing them with vlc to see if they play there.

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Getting audio but not video during playback using Airplay-

I'm using my iPad 3 to stream content from my Amazon Prime video account the via Airplay to my Apple TV. I'm getting the audio, but not the video. Are these units capable of doing what I'm trying to do, do I have to set up certain settings to do this? Help!!!

How do you know or find out if that's indeed what they're doing of if something is after all technically awry?

Audio Tracks and Video Out of Sync!!

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

StreamigHow to get audio component of Video out of AirPort/stereo using MBA

Similar Messages

Maybe you are looking for