Streaming Access Controller

Question

hi
I've successfully setup a live broadcast with access controller that will prompt for username & password. However, is there anyway to disable the popup for entering username & password?
My idea is to retrieve the userid from the rtsp link, e.g. rtsp://<test>/<test.sdp>?id=abc. And the password is a static password for all user.
The qtaccess & qtusers are generated by the db whenever there is a new user, so only registered users are permitted to view the video. Even there is another person know the sdp addr, will still unable to view the clip.
Any help will be very much appreciated.
Thanks.
Tekwan
  Mac OS X (10.4.8)  

Answer 1

So from WLC Ports (Physical Interfaces) to the Switch is almost always an 802.1Q trunk. You create WLC dynamic interfaces to distribute traffic on the LAN, but these are essentially VLAN dot1q tagged interfaces (logical interfaces) to allow wireless traffic to distribute to the appropriate wired VLAN. Most deployments I do typically configure link aggregation between the WLC and the switch which would be trunked, any load balancing must happen on the switch as the WLC doesn't support LB schemes. Essentially the connectivity is Physical WLC port(s), to Physical Switch Port(s) dot1Q is configured on the switch ports. Dynamic interfaces (logical) identify where to distribute WLAN traffic to the wired network. Long story short you map WLAN's to VLAN's.
This is a great community with lots of experts willing to assist, so welcome.
~please rate helpful post~