Streaming Apps no longer work after Gingerbread update

Hi Folks,
Add this to the list of weirdness after the 2.3.4 update...I have some apps that I use to listen to streaming media, like AMR Radio and iCatholic Radio.  Ever since the 2.3.4 update they will not stream anymore. They seem to run just fine, you press play and it says that it's buffering audio and then...nothing. No error messages or anything just won't play.  I have already done a FR on the DINC and that did nothing to fix it.
I also can no longer stream audio or video files that are up on my DropBox and that used to work fine under FroYo as well. What gives?  BTW - this is true whether I am on 3G or WiFi.
Anyone else seeing this? Even better, anyone have a fix?
thanks!

You can try clearing the data for the app by going to Settings / Applications / Manage Applications / (App Name) /  Clear Data or you can uninstall the app and reinstall the app because when you update with some apps installed it saves the settings from the previous OS and this is known to cause issues and this is why I suggest to hard reset before OS update..
Try the options above and see if it helps...

Similar Messages

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

  • Many Apps no longer working after software update

    I recently updated my iPhone software and since then many of my apps don't work. usually wat happens is that when i click on an app the screen will go black for a few seconds then go back to my home page.

    Many applications aren't yet update for compatibility with the 3.0 software... that could be a part of the problem with some of your apps.
    Suggest you try the following 2 steps. Do the first step and see if that fixes the problem If not, do the second.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

    md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

    If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  Any suggestions?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • My Spreadsheet App no longer works after downloading the new ios7 software update.

    My spreadsheet app. on my iphone 5 ( that i had been using) is no longer working since the new ios7 update. So how can i solve this problem?

    check whether the App is compatible with ios 7, contact the app developer, or wait for the app update.

  • 3rd Party Apps No Longer Work After Update

    I just got my iPhone today and installed a few apps, Cube and GuitarChords. Both apps were working fine earlier. Later I connected the phone to my PC and it requested that I perform an update to v2.2, which I did. After the update, neither app would start. When I pressed the icon, it seemed to start for a few seconds then went back to the main screen. I reinstalled the apps and GuitarChords worked, but Cube still wouldn't start. I then did a hard reset (holding home and lock button) and now neither app will open again. All the apple apps start fine. Can anyone tell me what I need to do to get the apps working again?
    On a similar note, how would you guys rate the stability of the iPhone at this time. I mostly use my phone for business, so if it's still pretty buggy I'd like to return it and get back on my Win Mobile phone for now. Thanks in advance!

    IT DID IT AGAIN!!!
    I didn't change or update anything. I was using the Touch Term ssh client this morning and it was working fine. I tried using Win Admin later this afternoon and it wouldn't start, none of the 3rd party apps would. Again I tried the soft and hard resets. I even tried resetting the phone in the general menu. After looking around online, I see that this is an extremely common issue. I'm going to return the iPhone tomorrow and have my Tilt reactivated.
    I don't know if Apple monitors these forums, but if so they should take note; if they intend to make a dent in the enterprise market, stability needs to be a top priority. Sure, Windows Mobile doesn't have a very pretty or friendly interface, but it's quite reliable. In the year that I had my Tilt, it crashed once, and that was the fault of buggy software I had installed. Honestly, this being the first Apple product I've personally owned leaves a poor impression of the brand. I know Apple can do better, I manage several Macs at work and I almost never get support calls from those users. I really like the iPhone, and hopefully Apple can get their priorities straight and work out the issues, as I would like to give it another go in the future.
    Thank you again to those who responded to my question earlier.

  • Android remote iTunes app no longer works after 10.5.2 upgrade.

    Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine.  After this upgrade, my tablets no longer show up as "devices" in iTunes.  Am I the only one to experience this?

    Thanks for your replies.
    I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
    My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
    I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
    Thanks,
    Danny

  • Bluetooth headset no longer work after latest update

    I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
    I also tried doing the same thing with a Plantronics 245 and I get the same issue.
    Both headset work with my phone.

    FIXED!!!!
    Steps to UNF*ing your Mac.
    1) Install an app called Pacifist
    2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
    3) Load your OSX Install DVD
    4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
    5) Open your OSX Installer DVD in Pacifist
    6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
    7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
    8) Repair permissions (Do NOT skip this)
    9) Reboot
    10) MOST IMPORTANT: Never install the update again!!
    Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
    You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
    Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
    Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
    In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
    This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

  • Airport no longer working after latest updates

    After my latest software updates, the Airport on my 13" Macbook is no longer working.
    I can connect to networks and can get full signal from the wireless router in my home, yet none of my browsers can actually connect to the internet.
    I've tried multiple wireless connections and none function properly. Suggestions?
    I'm currently connected directly to my NETGEAR router via ethernet

    Experiencing similar issue.
    Wired works forever without any issue. Wireless (airport) works for a while (random 2-60 minutes, could be related to data volume) then gets stuck. At that point getting back to wire (without reseting the airport AP) solves it. Also, cycling the airport client (disable/enable) gets it to work for a few minutes... until it gets stuck again. Other devices (iPhone, iPod touch) connected to the same airport AP do get access while the macbook is stuck.
    Thought this could be 11n related since the macbook is the only device running 11n. However, while wireless http/web access is stuck on the macbook one can still perform ftp connections (bit no file transfer as such), pings and/or access the time machine configuration (some of this seems to be randomly working) from that macbook. Not sure whether 11n handles short bursts and large bursts differently?
    Finally, the behaviour is the same whether using Safari or Firefox and relaunching eitehr app does not solve it.
    Clueless for now.

Maybe you are looking for