Streaming audio issue

I'm trying to listen to live streaming audio from MLB.com, and it works fine... for a while. The little marker on the QT application slowly makes its way to the right side of the screen as the audio plays. Once it gets to the far right side (as if it were only a 5-min clip instead of an ongoing stream), it starts cutting in and out. It's like QT thinks it's gotten to the end of the stream and then realizes it hasn't and does that every 5 sec forever after that. What can I do to fix this?!
MacBook 2GHz   Mac OS X (10.4.6)  

No body is sending reply. I am just activating the thread by sending reply my self.

Similar Messages

  • Facebook and streaming audio issues

    I like using Facebook and stream audio from my favorite radio stations!  However, I am running into adobe flash upgrade issues!!!!  I can bring up Facebook but I can't run certain programs within it.  I can bring up my favorite radio stations but won't let me stream audio!!!!  Any solutions?

    What exactly are your issues?
    I had an issue where every image found on the blog template was showing up instead of the actual image that represented the blog post. My fix was to make sure of the following:
    1. Blog image needs to be small in file size. Many bloggers post images that came straight off their camera and I found that the share tools will grab the most accessbile and light-weight files first. If the image is too big then it won't grab it at all. The share tool grabs the smallest and fastest loading, top-most in the code image first, which means the images found on the template of the blog.
    This issue occurs at WordPress too, so it is not restricted to BC but rather the tools provided to share.
    2. Try to avoid putting the image inbetween <p></p>'s, when I pulled mine out of the the paragraph format, they were found quicker.
    3. Avoid having the image lead off the blog post list before the bodypreview, if you can at all just show the image on within post detail page if you can. I know that having an image in the list helps, but then just put the whole blog in the list, like WP does. Problem here is that most share tools on the list have a problem diciphering what to share, so it shares the whole page, giving everthing a share count. WP does this better. They isolate the independent listings and provide isolated share tools for each list.
    Wait a week and the technology will change again.
    Good news is that the element that Facebook offers to share a page on the web will be featuring the option to upload an image to accompanying the sharing of the post. You can see this happening at Facebook already when you drop in the link of the post into a news feed.
    I hope this helps.

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Pioneer FH-8000BT Car Radio & iPhone OS 3.1/3.1.2 Bluetooth Audio Issue

    I have a Pioneer FH-8000BT Car Deck that has Bluetooth (http://bit.ly/4c7ofq).
    I have an iPhone 3GS 32GB unit that came with iPhone OS 3.0 on it with Firmware 04.26.08.
    I upgraded to iPhone OS 3.01 when it came out and all was fine (the baseband was unchanged)
    I upgraded to iPhone OS 3.1 while keeping Baseband at 04.26.08 using methods that shouldn't be discussed, and while the upgrade went perfectly fine, my audio between the deck and the phone now gets garbled for both me and the person on the other end. The audio compression issue occurs every 30 seconds - 2 minutes and lasts for about 5 -15 seconds and repeats itself during the call. Kind of annoying right? You bet! I have to put the phone on speakerphone to talk to someone. I won’t be able to do that much longer because as of October 26th that will be against the law here in Ontario. All devices in the car must be hands free.
    Recently, I upgraded to iPhone OS 3.1.2 and upgraded the Firmware to 05.11.07 to see if it would make a difference and it made no difference - I still had BT compression issues.
    I have tried with another iPhone (a 3G model) running 3.0 -> No problems with BT audio compression there...
    I've even swapped out the deck with another one - but I have yet to attempt a 3.1 or higher OS.
    Pioneer told me that they were hearing reports about this deck with the iPhone, but they never heard about the technical details I gave them. No word about a firmware upgrade, or a fix for this from them.
    I've had my phone swapped out at the Apple Store here in Toronto, and I had OS 3.0 on it which I don't think I'll be upgrading at this point because of the audio issues. So, I am stuck at OS 3.0. Unfortunately some Apps I use are now becoming a minimum requirement of OS 3.1 - par for the course I guess?
    I'm very curious what changed in OS 3.1 since 3.0/3.0.1 for the bluetooth...
    Does anyone know?
    Just wondering if anyone else out there has this deck and has a problem?

    You can get the Bluetooth Audio streaming working? I can't get that to sync up properly. sigh ...
    I called Apple and they documented everything for me ... Case # 140385552
    If you can do a test call for me that would be amazing! Just keep talking ... you should be able to hear the audio compression problem (and so should the person you're talking to) ...
    Glad to hear there's someone out there who has the same deck as I do.
    Also find out if your callers hear your alternator whine when you drive ---
    I get that problem too but that's wiring / deck related. A ferrite core should solve it but I can't be bothered at the moment.
    You using the usb cable at all or using bluetooth to stream?
    I'm using the USB cable. I can get the audio to pause and play using USB cable.
    Again, I'm unsuccessful with the BT Audio Streaming part.
    Message was edited by: Cory Megitt

  • Operating Windows 7 Home Premium, 2 user accounts. Running Firefox one user can stream audio and video, the other cannot. Can anyone help?

    Two accounts set up. One can stream audio and video using Firefox, the other account cannot. The account with cannot stream a/v is able to steam a/v using (gasp) MS Internet Explorer. Is there some setting I have screwed up?

    There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].

  • Bug: OS 4.5 Media Player does not allow BB screen to shut off when playing streaming audio

    I updated my Verizon Pearl 8130 to OS 4.5.  Now, when streaming audio from a station such as "Groove Salad" at http://www.somafm.com, the screen does not shut off but stays on indefinitely, wasting precious battery power.  OS 4.3 Media Player did allow the screen to turn off when streaming audio.
    - Bill

    I have a similar issue since upgrading to to 4.5 with my vzw 8130.   with 4.3 I was able to stream audio and then have it run in the background to read messages or address book for example all the while the audio was still playing.   Now once I get the audio streaming and back out to the main menu the media player quits.

  • Flash CC 2014 Update broke streaming audio in timeline

    Is it just me? it used to be that when you started a streaming audio file in frame 1 and when to frame 400 and hit enter to start preview, it would start the audio from frame 400. now it starts over from frame 0. this make animation cueing especially with a soundtrack a complete mess. virtually impossible to sync by sound now. especially when the soundtrack has a consistent waveform and you can't determine where peaks of instruments are.

    Hi,
    Do you see this issue consistently across files or on a specific file? If it is specific to a file can you please share the content? Also please post your machine configurations.
    Thanks!
    Mohan

  • Bug: OS 4.5 Media Player sometimes aborts when initiating streaming audio

    I loaded OS 4.5 on my Verizon 8130.  When attempting to initiate streaming of the Groove Salad 64 kb station at http://www.somafm.com sometimes it works and sometimes it doesn't.  I have had these various results when it did not work:
    BB rebooted
    Received a java language null pointer exception
    Received a java error message that indicated an array index was out of range
    RIM can you please fix this?  Thanks,
    - Bill
    Message Edited by WPWoodJr on 11-17-2008 01:41 PM

    I have a similar issue since upgrading to to 4.5 with my vzw 8130.   with 4.3 I was able to stream audio and then have it run in the background to read messages or address book for example all the while the audio was still playing.   Now once I get the audio streaming and back out to the main menu the media player quits.

  • Droid Razr Bug.  Won't play streaming audio from websites.

    My Droid Razr won't play streamed audio from a website and won't play .wav files attached to e-mails.  That's annoying.  
    Motorola tech support said problem will be fixed upon next upgrade of Android OS.  
    My phone is currently running Android OS 2.3.5.  
    Does anyone now of a quicker fix?
    Does anyone know when an OS upgrade will be available for the Droid Razr?
    Thx!

    i got the same issue on my ipod. i figured the whole idea of converting the format would solve the issue. never really found out how to solve it. i'll be watching this post to see if anyone has a solve for this issue.

  • Streaming Audio/Video Won't Play!

    Ok, I've had this dilemma for quite a while and I notice that it happens in every browser I use on my iBook. I want to listen to some streaming audio or watch streaming video and everytime it attempts to load I get a pop up saying "Cannot play back the file. The file format is invalid" This just happens usually when the streaming is Windows Media..is my Windows Media player not functioning correctly? What's going on? Any help would be appreciated. THANK YOU!

    From a Microsoft Bulletin:
    Cannot play back file. The file format is invalid.
    In some cases, you might be able to play the file in Microsoft Windows Media Player on a Microsoft Windows-based computer, but not on a Macintosh. This occurs because Windows Media Player for Mac is parses .asx files more strictly.
    This issue may occur if the .asx file contains an error, or if there is an error in the HTML coding of a Web page that contains an embedded Windows Media file.
    To resolve this issue, test to determine if Window Media Player can play other .asx files. If it can, contact the owner of the Web site to have the owner troubleshoot the .asx file.

  • ITunes will not stream audio to AppleTv.

    Since I upgraded to Yosemite iTunes will not stream audio to AppleTv. IPhone and iPad running iOS8 works fine.

    Hey there Klausnorgaard,
    It sounds like AirPlay is not functioning correctly between iTunes on your computer, to your AppleTV but iOS devices work without issue. I would use the troubleshooting in the following article, named:
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Trouble streaming audio

    There's some background info to give on this issue first.
    Last week my internet connection had a brain ****. Opening a browser would just give me a strange page that appeared to be from Comcast (my ISP). The page told me to download a Comcast installer to get my account running, or something of the sort. Of course, I've had this account for months, so I did no such thing. And for some reason the Comcast logo was a pixelated, low-quality image. I didn't know if it was some kind of hacker thing or what. I had gotten a message from Comcast the day before or so, but it was an automated message that just said to call them, and I didn't feel like it since they didn't even say what the call was about. In addition to the browser thing, neither Limewire, iTunes, nor Thunderbird could connect.
    I wasn't home for a couple days, and when I came back it had magically fixed itself. Except I can't stream audio--when I try to open a stream in iTunes, it pops up the "Connecting" window, and just keeps trying to connect until I click stop. And when I stream movies with the Quicktime plugin, the video plays but not the audio. Both iTunes and Quicktime play back audio from the HD fine. And every other program I have that requires and internet connection connects fine.
    I have unplugged and replugged my cable modem, and looked around the System Preferences for anything amiss, but I can't figure out what the problem is.
    Any suggestions? Thanks.

    Hi--
    Opening a browser would just give me a strange page
    that appeared to be from Comcast (my ISP). The page
    told me to download a Comcast installer to get my
    account running, or something of the sort.
    That's called a "walled garden". You get stuck there if Comcast thinks your cable modem isn't allowed to connect up to their system for some unknown reason. That happened to me earlier this fall with an old Surfboard 3100 modem.
    I had an old machine I felt like I didn't mind sacrificing if I had to, so I went ahead and downloaded their software. The funny thing is, it wouldn't finish provisioning the modem, I had to call them anyway. In the end, after other troubles with that modem, I just returned it to Comcast and got a newer one. It's been pretty good so far...
    But what you described, the ugly logo, etc., all sounds like the "walled garden". Don't know why or how it magically fixed itself, though.
    Your streaming problems almost sound like a Quicktime problem. Especially where you have video but no audio. You might try re-installing QuickTime and see if that helps.
    charlie

  • How can I record streaming audio???

    HP HDX 18T laptop
    Windows 7
    NCH Wavepad sound editor
    Hi, I desperately need help with this issue:
    Is there anyway I can turn "OFF" the speakers so sound does not come from them, but STILL have audio levels active internally so I record streaming audio with my NCH software Wavepad program?
    I've been trying everything .. in the Control Panel setup, I am trying to "capture" streaming audio with my Wavepad program, but I can only attenuate the "mic" levels that the actual laptop picks up .. for example, if there's background noise in the room, it picks that up - I DON'T WANT THAT! - I only want the streaming audio from a recording - not the background sounds in the room.
    Folks at NCH Software keep telling me to check with laptop of Windows advice.
    Wavepad used to do this easily and cleanly before (well, on other computers and other Windows versions)
    If I go into Windows Mixer, and turn down Speakers, it also forces to turn down System Sounds - I do not want system sounds down; only speakers.
    Summary:
    I want to record streaming audio into my audio capture software.
    I want to independantly cancel laptop speaker output, while maintaining audio levels for streaming capture.
    I DO NOT want extraneous sounds in the room's background picked up by the laptop's mic, which then interferes with the recording.
    (or is there a Windows program that will do this for me? I spent $$$ on the deluxe Wavepad software ,, but it's not doing what it used to do)
    Any help, or advice will be GREEEEEEatly appreciated!!!
    Thanks, Michael

    Fixed (I think ....?)
    Turns out there's no "Stereo Mix" option in my Control Panel sound boxes .. apparantly no one else has it either in Windows 7??? depending on sound card ...
    Well, a work-around is to connect a male mini-plug "Y" into [one of] the laptop's headphone outs; then run a mini-plug cord (male-to-male) from it to the laptop mic "in" ... that leaves one unused female mini-plug on the "Y" .. which you can then run your headphones (or speakers ) off of.
    Found that solution online .. got the parts; it works now.
    Still baffled why there's no "Stereo Mix" in Windows 7 ....?

  • Macbook 2009 bluetooth Yosemite  - Streaming Audio problems

    I seem to have terrible problems with bluetooth streaming Audio ever since the upgrade,  sounds like a bug that needs to be fixed.

    I also always listened to streaming web radio in itunes (128k) which is now barely usable in Yosemite, it skips, drops out and stops playing constantly.
    I have a 75mbps fios connection so that is not the issue and it always worked great before. Just started after upgrading to yosemite.
    imac 27", osx yosemite 10.10

  • Streamed audio stuttering since update to Yosemite

    I have a big problem with stuttering streamed audio and video (Spotify, Deezer, Netflix etc) since I updated to Yosemite. It seems to get much worse when the stream in question is not the "active" thing on my screen. For example when the screen goes black due to standby mode when listening to Spotify or when surfing on one tab while listening on Deezer on another. Also, while watching Netflix on another screen with the laptop lid closed, it doesn't take long before the audio and video becomes off sync. Does anyone else have this problem or have any idea on a solution?
    I have a Macbook air 13" mid 2012 and 100 mbit connection. I completely erased the hard drive before installing OS X Yosemite.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2456546649 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for