Streaming Audio (Radio) fails to work after upgrade to 8.1.0.52

I just upgraded to the above-stated version of iTunes. Radio doesn't work, and nothing streams at all! iTunes attempts to get the playlist but to no avail. I have attempted this with a large number of streams with the same response.

I'm having the same problem. I can't get anything to work that involves sound. No streaming radio, no Pandora, nothing. Just a warning that iTunes detected a problem with my audio configuration and that audio and video won't work because of it. I changed nothing but the version of iTunes I run.

Similar Messages

Audio Inputs no longer work after upgrade to 10.4.10

Anyone else having trouble with audio inputs after upgrading to 10.4.10? Here's my deal:
MacPro dual 2.66, 4GB RAM, running 10.4.10 as of this morning.
Upgraded to 10.4.10 today and the mic on my Plantronics USB headset quit working. 'Phones still work. Here's what I did:
1. Tried multiple audio input devices. None work.
2. Tried all USB ports, problem persists.
3. Tried the 1/8" audio input, problem persists.
4. Zapped PRAM, problem persists.
5. Called AppleCare and they had me do an Archive and Install on the system software, which installed 10.4.7 and the problem went away. Then, at their suggestion, I let Software Update reinstall 10.4.10 and the problem came back.
6. Rebooted the system from a 2nd internal drive running 10.4.9 and the problem went away.
Seems pretty clear to me that this issue is with the OS, yet Apple's support staff insists the problem is "with the data on my boot drive". Thing is, the data on the "problem" boot drive consists of exactly the same applications on the other drives, and only those applications. There ** is no ** data on the boot drive other than the OS and some applications. Yet the other drive I can boot from that runs 10.4.9 and doesn't cause audio input issues contains all sorts of junk.
So, to reiterate, I'm booting from a clean boot drive with nothing but OS 10.4.10 and some pro applications on it and the audio input won't work. I boot from into any other Mac OS on this drive or any other and all is well. Yet this problem is supposedly with my data?
Is anyone else out there seeing issues like this?

I used a UVC-compliant USB Logitech camera (the
Fusion) driverless
under OS X 10.4.9.
FWIW, none of these devices are actually driverless. They rely on drivers either supplied separately by some company (not necessarily the vendor of the product) or bundled into the OS. Usually, the bundled drivers are based on open standards like UVC mentioned in the link. Apple writes a lot of the bundled driver code itself but some of it comes from outside sources like LSI or Intel.
An unfortunate fact of life is that open standards are not always as well defined as they ideally should be. Another is that certain companies sometimes set their own standards that aren't quite compatible with open ones, sometimes to implement real or imagined improvements on an open standard, sometimes to gain a marketing advantage.
The good news is that the market usually -- eventually -- favors the open standard. The bad news is that it often takes some time for this to happen, leaving users -- particularly Mac users, who still represent a smaller market force than those using Windows -- without a solution for an uncomfortably long period of time.
Your best or only recourse for now may be to downgrade to 10.4.9 until this gets resolved, but you should also take into account that not all users are having these problems so it may be something other than the update itself that is causing the problem. I just video chatted with a colleague using an Intel Mac mini who is having no problems whatsoever -- we are both puzzled why he is unaffected while others are.
Sorry this couldn't be of more help.

Streaming audio apps don't work after 10.1

Since updating my Z10 and my wife's Z10 to 10.1 on Telus none of the streaming audio apps work over LTE or HSPA+. Songza, 8tracks, slacker and nobex all stop playing music after a couple of minutes unless I tell them to play again. Help please.
Solved!
Go to Solution.

is your Z10 SIM-locked? If no, can you try with a SIM card not from Telus?
Maybe you can also give Telus a call and ask them about the streaming. Do they allow it?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
Have tried installing Vista drivers in stead, does not work.
Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
Would very much appreciate help.
Thanks.
This question was solved.
View Solution.

My solution is here (registry editing required):
Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

2nd monitor fails to work after upgrade to 10.4.6

Hi,
I have been running fine with 2 monitors until I upgraded to 10.4.6, and now my 2nd monitor is not detected (even after I click the detect displays).
Apart from the upgrade - I have changed nothing
Other Info:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Any thoughts/ideas.
cheers
-brett

Resolved:
After a few reboots and a couple of power cycles, it all just started working.
cheers
-brett

Applications fail to work after upgrading to Snow Leopard

I can't believe how poor a job the upgrade is! Ok, Snow Leopard installed ok and saved me a good bit of space. It also boots a lot quicker too. But.....
..what is the point of all of this if it no longer opens my applications without crashing every time??! I wouldn't mind if they were old but the apps are mostly the latest versions, and are even Apple products too! E.g. Final Cut Pro.
Also, the apps that do open are now asking me for the registration codes all over again. If this was meant to happen then a heads up would have been nice
Apple.
I would prefer the slower Leopard with all my apps working than this upgrade where I can't do anything!
What kind of upgrade do you call this Apple??? I hate to say it but Microsoft might well have done a better job! Will Apple be resolving these issues soon?
Any one else having problems with applications?
Anyone found a solution?
Anyone know how to backout the upgrade?
Many thanks from a very disappointed Apple fan.

Everyone in my household who has upgraded to Snow Leopard has had the same problems with program crashes and the computer "forgetting" registration codes.
In fact, after re-entering codes, and then upgrading to 10.6.1, we had to re-enter them again because it forgot (again) that we had bought/registered the software. It was a lot of fun digging through old emails and such looking for the codes, let me tell you.
I'm pulling a Vista and downgrading my computer back to 10.5.x. That was stable and remembered my software, at least.

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Reports no longer work after upgrading to SCCM 2012 R2

I upgraded my SCCM 2012 SP1 environment to R2 and reports no longer work. I've removed the site role, waited a day, and added it. I've also verified the account (used by the reporting site role) has access to the DB and can logon locally. The
problem still persists. Here's a copy/paste of the error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXscrubbed' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I've tried many other TechNet solutions as well with no improvement:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
Any other thoughts on this?

So to be clear you have Done both the Mofcomp and Added the correct account to the Windows Authorization Access Group?
What is version of SQL are you using?
Is SSRS remote or local to CM12?
What service account are you using for SSRS?
Bases on the error message you are getting this within the console, Does the native SSRS report work? BTW I never recommend accessing the report via the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Bluetooth handset not working after upgrading to 2.2.1

I failed to get my bluetooth headset working after upgrading to 2.2.1. I have tried 4 different headsets (with different brands and models)and even bought a new one (Plantronic 640MP) and no luck also. I have also tried to hard reset and restore in iTunes but no success.
I can successfully paired my headset with iphone 3G but no sound transmitted over. I have been using my headset flawlessly before the firmware upgrade.
Any ideas? Thanks in advance.

Hello.
I´m new to iPhone and this forum
I am having the same problem with my iPhone but I don´t know if it´s related with 2.2.1. firmware since that came on the iphone right away when I bought it.
I can connect to handfree set and pair up fine, but no sound what so ever is passed to or from the handsfree set. The handsfree set works fine with other phones.
I tryed restore but it didn´t help.
I restored the iphone with itunes, the function "If you are experiencing problems ...." hit the button "Restore" e.g.:
http://www.tzywen.com/photos/iphone/itunes_restore.png
After that it told me to "set up my iphone" and I chose "restore from the backup of" e.g.:
http://www.mattcutts.com/images/restore-iphone.png
The links are not from my procedure, just something I found on the internet to describe what went on
Did anyone find a solution for this problem?
How often do Apple make new firmware upgrades? (hoping that will help)
Regards Martin

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Streaming Audio (Radio) fails to work after upgrade to 8.1.0.52

Similar Messages

Maybe you are looking for