Streaming audio restarts after stopallsounds

Hello,
the site in question is thirdcache.com - i've got streaming
audio playing as background music, however after someone clicks the
stop all sounds button it stops, however when the background music
reaches the end of it's timeline, it starts back up again. How do i
get it to stop forever? Also, how do i get this button to have two
functions, off and on.. without embedding the audio, I want it to
start and stop the streaming audio.
Any help in this matter would be greatly appreciated.
Thanks
Ed
Third Cache

hello clbeech,
Thanks for you reply - i love the etherial light effect
you've got on your site - i'm going to purchase a copy for myself
later today. In regards to the question above... i should have made
myself clearer, i'm not the regular web guy, I'm just a plain ol'
pixel jockey - unfortunately (for me) the web guy put the site up
and f'd off to his holiday before i could check it over so i've
found some problems. I have a basic understanding of flash, but not
of action script. From what i can see here he's using a behaviour
to call the sound in streaming. I know enough to change the code,
but no where near enough to write my own...
Do you have the code handy by any chance?
Thanks...

Similar Messages

Streaming audio apps don't work after 10.1

Since updating my Z10 and my wife's Z10 to 10.1 on Telus none of the streaming audio apps work over LTE or HSPA+. Songza, 8tracks, slacker and nobex all stop playing music after a couple of minutes unless I tell them to play again. Help please.
Solved!
Go to Solution.

is your Z10 SIM-locked? If no, can you try with a SIM card not from Telus?
Maybe you can also give Telus a call and ask them about the streaming. Do they allow it?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Audio stream (LCCS) persisted after browser closed

In our app, audio and video streams are published into a room while the users are chatting.
We were told that it is not necessary to explicitly stop publication; logging out of the room is sufficient.
Tonight I just had an experience where my chat partner tried to leave the room, experienced a bug, and then closed his browser (Chrome). He used a tool to kill the process (Chrome) but the audio stream was still being published and audio was going both ways. He could still hear me, and I him, even though his browser was no longer open.

I might have to switch to the dreaded Internet Explorer over this. Chrome has no way to change the menu bars around.... which is too Microsoft-like for me. I don't even know if IE lets you modify menu sizes/positions. I left IE because a past version wouldn't let you mess with the menus.
I found to stop an audio stream from playing after you close a browser window killing the Firefox process works. But I don't know if that is because it is a Firefox issue, or killing Firefox also kills any Flash add-ons.
Grrrrrrrrr.

Resume streaming audio by using MPMoviePlayerViewController after phone call is ended

Hello,
I am implementing an universal app. In which I used MPMoviePlayerViewController for playing streaming audio and its working fine. But when there is call during playing the streaming audio it stops. I also posted a question on Stack Overflow but no output (http://stackoverflow.com/questions/16333501/resume-mpmovieplayerviewcontroller-a fter-ending-phone-call/16333616?noredirect=1#comment23431276_16333616). How can I resume streaming audio after call is ended. Is there any way so that I can achieve this? Please help me out.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod
BTW this is the iPOd touch forum

Browser is non functional after receiving phone call while streaming audio

If I browse to a site that streams audio and play that audio, when a call comes in I am able to answer the call and hang up but when I go back to the browser it appears that the Quicktime window that plays the audio is in the background behind some kind of black modal window except for a thin space at the top of the screen. About the same size as the window for an active call if you do other things with your phone while in a call. I can still hit the Done button on the top left hand corner but that is the end of it. I can't use the browser anymore until I reboot the phone(which I find myself doing quite frequently since the iOS4 update...it reminds me of my Windows Mobile 5 phone it replaced).

Hi Janineadam,
Welcome to the community forum. I am sorry to hear you have been left without service. I can look into this for you. Please send me in your details using the "Contact Us" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Streaming audio data won't stop unless I turn off the phone for 5 minutes.

I have been testing the Curve 8330 regarding streaming audio from an icecast server. The address of the station is http://www.AirProgressive.org, click on "listen". (I have already run this by the icecast experts and they say it is a Blackberry "bug")
BLACKBERRY USERS! PLEASE BE AWARE THAT THE STREAM (dataflow) DOES NOT STOP WHEN YOU CLICK "STOP" ON THE MEDIA PLAYER! (and will continue for as long as you leave it on, and even if you turn off your BB for less than 5 Minutes.) I'm not sure if you are charged for these streams, but it seems that the battery is depleted rapidly if this continues without aborting it. See details of my testing below:
> Access icecast stream by clicking on the link on the website:
     http://www.airprogressive.org:8000/stream.m3u
> Stream consists of mp3 at 32kbps / 22050 Hz.
> Stock media player launches, stops at "Do you want to open or save the item."
    > No connections started yet (viewing "List Clients" page of icecast admin interface).
> Click "open", stream begins playing.
> Two connections are started instead of just one, always offset by 2 seconds.
    -- but sometimes only one connection starts.
> FYI, Icecast config: <client-timeout>30</client-timeout>
Here is the output from the "List Clients" page of Icecast2 Admin
IP
Seconds Connected
User Agent
Action
68.7.238.55
406
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
6
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
4
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Note the last two entries with the same IP address. This is the Blackberry. Top entry is winamp player on PC for reference. Don't know why two listener connections are generated.
> Stream is "Stopped" (i.e. click stop)
> Stream is restarted (i.e. click Play)
> A new connection is started, this time with a new +1 IP address.
IP
Seconds Connected
User Agent
Action
68.7.238.55
687
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
287
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
285
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
8
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
I can understand that the player may continue to communicate when "stopped" to fill the lookahead buffer, but when it is restarted, it should use the same connection and not start a new one.
> Click Stop.
> Click Play.
IP
Seconds Connected
User Agent
Action
68.7.238.55
803
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
403
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
401
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
124
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
24
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
> Yet another connection is started with a new "listener".
> Click "back" to exit from browser in Blackberry.
> All threads continue.
    --> I have tested this many times and the threads continue without being cleaned up indefinitely, even though the player is stopped and the stream is not "playing" on the handset.
> Turn off mobile network. Handset not communicating.
> Threads continue
> Handheld turned off.
IP
Seconds Connected
User Agent
Action
68.7.238.55
995
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
595
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
593
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
316
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
216
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Finally, after over 300 seconds, the threads are finally cleaned up.
IP
Seconds Connected
User Agent
Action
68.7.238.55
1139
WinampMPEG/5.62, Ultravox/2.1
Kick
So, to stop the streaming server from communicating with the Blackberry handset, you must either turn it off or disable mobile network for at least 5 minutes.
It appears that the handset continues to transfer data (and therefore incur charges, if the user does not have an unlimited data plan) if the handset is not turned off or mobile network disabled for at least five minutes. It also runs down the battery much faster because the radio transmitter is actively being used, even if the user is not listening to the stream.
The Blackberry network has intervening servers that continue to receive data from the streaming server even if the handset is off. This behavior likely has utility to deal with the realities of the cellphone network, to allow the stream to be transferred from one cell to another, and deal with the possibility that the handset may be out of range for up to 5 minutes without "interruption." However, it is hard to turn off the stream.
QUESTIONS:
1. Is there a way to stop this sort of behavior using a configuration setting or something? It seems particularly stupid to start a new stream connection each time a STOP/START cycle is completed, allowing the old connections to continue streaming data (even if the data does not make it to the handset).
2. IS IT TRUE that the user will be "charged" for the data streams that are not disconnected?
3. Is there a way for a developer to send a signal to the intervening cellphone network to discontinue the orphan streams?
THANKS!!

No, I'm using something like this :
to start...
                   channel = new SoundChannel();
                                        soundPlay = new Sound();
                                        urlReq=new URLRequest;
                                        urlReq.url=mylUrl; // url of radio mp3
                                        soundPlay.load(urlReq);
                   channel = soundPlay.play();
to stop it...
                      channel.stop();
                      channel=null;
                      try{soundPlay.close();} catch (e:Error) {} // error or not, the sream won't stop.
Any idea ? Did you try with a NetStream object ?
Bernard

Airport Express does not show up in iTunes to stream audio...

I updated iTunes to 8.0 and no longer can see my Airport Express as an option in the pull down screen to stream audio from my iTunes to the AE.
The AE has a green light. which makes me believe that it found my LAN, but it can't find my mac.
Router: Linksys BEFSR41
iTunes: 8.0.2
What am I doing wrong? Why did it break after upgrade to 8.0?

I have a linksys wired router BEFSR41 and was not able to see Airport express in the iTunes page to stream music to my A/V device for quite some time.
Linksys set up page has a setting called "Filter Multicast in "security" section that allows for multiple transmissions to specific recipients at the same time.
The factory default is "disable". Change this to "enable" and save settings.
I did not have to restart iTunes to see the change take effect. The Airport Express showed up along with AppleTV for me to select...

Music on hold restart after prompt

Hey all,
is there a way to have the MOH continue to play or pause the track, play a prompt, and then continue playing where it left off?
At the present time the MOH restarts after every prompt places the contact back on hold.
ccx express version is 5.0(2)SR02_Build04

Hi,
The only configuration on UCCX related to MoH is the Audio Source selected on the CTI Port for the User Hold Audio Source and the Network Hold Audio source. Each time the UCCX script puts the call on hold, the audio stream gets connected to the MoH source on the CUCM or MoH server. UCCX doesn't control what MoH is played to the caller though beyond the device configuration when the CTI ports are being created.
I believe a fixed MoH Source would address this. Just as a heads up, The multicast option for MoH is not a supported feature with CTI devices like UCCX ports, as it can lead to transfer issues in some cases.
Here's a thread I came across on the IPT forum that discusses MoH restarting each time a call is put on hold.
https://supportforums.cisco.com/thread/301999
Thanks,
Brendan

Problem with streaming audio

I wasn't sure if this is a problem with Safari, iTunes, or OS X, so rather than post the question in all three of those forums I decided to post the question here.
I can't seem to get streaming audio to open and play when I click on their appropriate links in Safari. I tried several different links through a few different sites, but when I click on a "Play" or "Listen Now" link for an MP3 stream, a Safari download window opens and that's it -- no stream.
I solved the problem by copying the link, going to iTunes, and choosing "Open Stream" from the "Advanced" menu, and the stream played fine, but I would hate to have to do that every time I want to sample an audio stream.
Anyone know why it wouldn't work when I clicked on the direct link?
Thanks.

Nevermind. Noob figured out what he was doing wrong.
See Safari "Preferences", "Open 'safe' files after downloading".
/smacks self on head

Bad sound quality streaming audio via Airport Express

I am streaming audio from iPhone to Apple Airport Express (Airplay). Via optical cable the signal goes to Cambridge DacMagic and then to Stereo Amplifier. Sound is not good, there's some kind of 'chattering'.
When using AirFoil instead of Airplay sound is much better, but then gaps appear from time to time.
Please tell me, what can be the reason for it? And how to solve?
Thanks in advance.

Mr. Tessarex,
I use the Airport Exreme as router and Airport Express (2011, direct plug-in model)
Some facts I learned from the Airport-app on my iPhone:
Wireless clients from Airport Extreme:
iPhone 150Mb/s (802.11 a/n) connection: excellent
Acer laptop 144Mb/s (802.11 b/g/n) connection: excellent
The Airport Express:
240Mb/s (802.11 a/n) connection: good
I bought the song "Love Me Like You Do" (Ellie Goulding) via iTunes.
As you adviced me I tried to play it via iTunes, and streamed it from iPhone to Airport Express.
Especially listening to the bombastic part of the song (from 3:14). Sound was tolerable.
Playing the song from iPhone via Spotify: sound is awfull, totally overloaded.
Playing the song from laptop via Spotify (Airfoil): sound is good.
Playing the song from laptop via iTunes (Airplay): sound is good.
The song never plays 'Excellent' in any way. I Think the song was recorded 'over the top'.
Even when you listen to it via headphone, it sounds very messy, "on the edge...".
I am happy that most songs sound good. So far playing Spotify via laptop and Airfoil gives the best results.
According to the figures from the Airport-app, it seems I will never get optimal bitrate with my current system.
As amplifier I use the Luxman L505u, usually connected tot Airport Express via Cambridge Dacmagic,
but during testing via normal analog cable (without Dacmagic). So far I think the Dagmagic is not the problem.
What do you think, after reading my story?
Thanks in advance
Peter

Streaming Audio Application Problem

HI All,
I have written a small application for streaming audio in flash cs3/as2. One strange thing I observed that I cant play streaming audio from
all the free streaming website I add to the list. After the website address if I mention the port number then cant get the audio.
I tried with this address http://stream.radiosai.net:8002 that is added to trusted list/path. My analyse is that if the address has strings like ":8002" i.e port number then flash doesn't allow them to use... I also observed that if I run the swf file using internet explorer then everything works fine... however test movie (Ctrl+ENTER) from CS3 tool doesn't work Please help me....
Message was edited by: Manjunath Hegde

Here's the code.
EDIT
As always seems to happen for me, as I posted my code, I
found what was wrong with it. In my playSong function, I was saying
s = new Sound(); without reasigning the handler for the event. I
just didn't see it until right after I posted my code.
Thanks for your help anyway.

Streaming audio issue

I'm trying to listen to live streaming audio from MLB.com, and it works fine... for a while. The little marker on the QT application slowly makes its way to the right side of the screen as the audio plays. Once it gets to the far right side (as if it were only a 5-min clip instead of an ongoing stream), it starts cutting in and out. It's like QT thinks it's gotten to the end of the stream and then realizes it hasn't and does that every 5 sec forever after that. What can I do to fix this?!
MacBook 2GHz Mac OS X (10.4.6)

No body is sending reply. I am just activating the thread by sending reply my self.

Streaming Audio repeats every 11.5 minutes????

when on the CBC Ideas streaming audio site, the stream repeats and layers over itself after 10-15 minutes.
try it...
Im on a older computer on ubuntu 10.04 (768 megs ram)

Check to see if the problem is happening at the 99th slide. iDVD slideshows can hang up there. If so, reduce to 98.
I make my slideshows in iPhoto instead of iDVD, then File/Export to my desktop and drag the resulting Quicktime movie into the edge of the iDVD project's main window. You won't have the glitch at No. 99, if that's the problem.

Streaming audio podcast randomly unpauses when paused

Often when I listen to streaming audio podcasts on iTunes, if I have to pause it for any reason, it will unpause itself after a few seconds and resume playing. This can be irritating, because usually when I'm pausing it's because I need to step away, which means the heaphones come off. Then I will return and the podcast is already playing. If I don't mark the time when I pause it, I could lose several minutes.
I have been pausing the stream lately just to watch iTunes's behavior. Sometimes, sure enough, I'll see it automatically resume playback with no accidental button pushing or screen tapping.
Can anyone explain why it does this? It should always remain paused until I unpause it. Every time.

I see a similar problem with music loaded into the iPod software on my iPhone 3G. In this case, when I remove the headphones from the headphone jack (ie. not Bluetooth), the iPod software will suddenly kick in and begin playing the last music I was listening to. Note, this music in the iPod software is paused and still lists as "Now Playing" because there does not appear to be a way to tell the iPod software that you are done listening to that music.
This is a basic flaw with the iPhone software. It seems you cannot tell any software to "Exit" because you are done -- you can only hit the "Home" button and leave the software in background. This can be a plus in some circumstances in that the software will start up again much faster, but it can also be a negative in that the running software is vulnerable to doing unexpected things.
Message was edited by: DavidMasterson

Streaming audio restarts after stopallsounds

Similar Messages

Maybe you are looking for