Streaming clip won't play

If I try to play/stream a clip, rather than getting the "Q" in the center of the screen, the QT player opens, it quickly says "switching", and then the content page opens and nothing happens. I'm using FF browser on an emac with 10.4.11. Thanks for your help. mj

Pamela, welcome to these discussions.
The biggest part of the trouble with the html code is the method you've used to "call" the .mp3 file. You've only used "embed" tag and many PC browsers require more.
http://docs.info.apple.com/article.html?artnum=61011
The graphic could be reduced in file size, too. Your page could load much faster.

Similar Messages

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

Why won't iMovie voiceover clips won't play sound!

I've been using iMovie '11 version 9.0.9, to make a school assignment. I started two days ago and it was allw orking perfectly fine, until today when some of the clips won't play. It started after I deleted a voiceover clip to replace it with a song from itunes. When I tried to add the song it showed that it was there but it played no sound. I managed to get that song working by dragging the song onto the whole project and then dragging and pinning it onto the parts I needed it.
After I got that working I tried to add new voiceover clips to the project but then there was no sund coming from that clip either! After about an hour of searching and fiddling I had just about given up when I played my project in the background and ran it through untill the end and I heard the last clip I added, that wasn't working before but now is.
At this point I recorded another clip to add thinking my problem was fixed, but alas that voicover clip played no sound. I thought I might try running through the entire project again to see if that would help like the last time. But no, that was not the case, in fact even more sound clips have stopped working.
I read in a lot of other threads that it might be a corrupt clip and it will have a yellow triangle with an exclamation mark in it (or a spinnign circle?), but none of the clips have this! Is there something I need to do to see the triangle, if that is the problem? Or is it something completely different?
Please help me I desperately need to get this working by tonight!

Sorry, but there's a dedicated discussion forum for iMovie, where you might be luckier finding help.

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

Help!! video clips won't play in slide show

I have a 40 minute Aperture slide show presentation that contains a few video clips (time-lapse videos, etc). It played well last summer. However, now that I am about to present the show tomorrow I can't get the video clips in the show to play. They have all been located and connected to the original files. If I double click on individual video clips they will play in the browser window but they won't play in my slide show. Any ideas? I'm in panic mode!
Aperture 3.4.5.

What happened since last yoear? Have you reinstalled the system at some point? Maybe you had last year additional video codecs installed? Flip4Mac, Perian?
Do your videos play in QuickTime Player, when your export them to the DeskTop?
Are your videos iPhone videos? In that case you may have a problem with
Also, if you recently run a cleaner utility that cleared the caches, you now may have a missing com.apple.xpchelper.cache in /System/Library/Caches .
This has been known to cause videos from stopping to play. This file will only be recreated by reinstalling MacOS X, but you can force its recreation by a Terminal command. See:
Re: Library doesn't play MOV-files on one computer, no problems on another.
Regards
Léonie

Embedded audio and video clips won't play in a pdf doc.

I have an EPK with embedded clips that won't play. I've udated all my software, and followed the isntructions for allowing 3rd party content ot be stored. Macbook Pro with all updates installed.

The "wm" part of the file extension is a Windows Media Player format.
They are not compatible in QuickTime without third party software help.
http://flip4mac.com is the Microsoft recommended method for Mac users to view WMP formats and they offer a "beta" version for Snow Leopard users.
Your AVI file has the same troubles but the fix may be a bit easier to fix:
http://perian.org (for the codecs) and the older QuickTime Player.
To install QuickTime Player you use your Snow Leopard DVD and the "Optional Installs" package.
It will install in your Utilities folder.

Audio "sub-clips" won't play in source monitor, but will play when cut into a sequence.

I'm cutting an "audio only" project in Premiere and I came across a strange problem while making sub-clips. The first 6 sub clips made from the same master audio clip were normal, but then something changed, and the rest of them won't play any sound while in the "Source" window, even though while in the window the sub-clip displays a waveform.
Once edited into a sequence they play normally, but not being able to listen to the sub clips in the source monitor is annoying, and louses up my whole editing routine for this kind of project.
Any ideas as to why this is happening, or what I might do to fix it?

Number of issues here:
1. Your system does not meet minimum requirements.
2. Your CPU, disks, memory are not enough for anything other than DV.
3. What video camera was used with what codec on what OS with which version of PR. etc.
Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

Clips won't play at correct time

Hi,
So a while ago, iMovie HD was working just fine, but then it started messing up the timing of my project. I am making a slideshow that is 15 minutes long right now and will get longer. I only use still pictures, music, and titles (no Ken Burns or transitions). Now, when the playhead is at the start of a pic, the photo won't play until about 3 seconds later. Sometimes, when the photo is playing at the wrong time, a different picture flashes. Basically, the duration of the pictures is all different, even though i set them all to have a 3 second duration.
I'm very confused why this is happening, because the same problem is happening to all my imovie HD files, not just the one. However, only pictures are delayed, not video clips or title sequences.
How can I fix this?

Hi
OK - I can give it a guess.
• Trash preference file - and/or -
• Repair Permissions
• Free space on start-up hard disk >>10Gb
this takes care about 95% of people with this problem. If it still persists after this
it will be more tricky.
My general list on this
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
• Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• iMovie updated ?
• QuickTime updated ?
• Mac OS version ?
• Program miss-match. iMovie 4 - will not work under Leopard
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’08 v. 7.1.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’09 v. 8.0.6, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (will work under Leopard and Snow-Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

Video Clips won't play

Although Premiere 9 with all updates installed, worked fine a few weeks ago now none of the video clips will play.
I imported a bunch of new clips without a problem but they won't play. My computer is new with lots of memory. The files are mpeg and the cam corder is a Panasonic HDC-TM60. I thought perhaps it was these new clips, but my old projects load without a problem but they won't play either. I just see the thumbnail. There is no sound. If I scroll, the clip moves so it is the clip and not just a still as I thought might be the problem. Any ideas?
Michael

I seem to have solved this problem. Premiere does not seem to like the MOTU audio interface I use for my song recording/composing.
When I switched the sound playback to the internal onboard sound card I once again had sound and video. Not sure why but I've got it working.
Michael

Final cut clips won't play- why?

I am editing on final cut x and two clips in my timeline won't play - they look dead or are faint and sort of a dark back colour - what have I done wrong to make them refuse to play? Cant hear or see them on the viewer - even though they look(while a bit blackened out) to be still in the timeline?

THANK YOU SO MUCH !!!! If your ever in Belfast dinner is on me x

Some clips won't play and audio is red

iMovie 10.05 (OS 10.9.5)- Mac Pro
I was working on a project in iMove- seemed to be going ok.
Then some of the new clips would not play video and the audio has a red bar in it.
also the yellow triangle with '!' in it showing some error- but no place that says what the error really is...
I don't like the new iMovie- but need it for the effects (I think iMovie 6 is a LOT easier to use)
Anyone have this happen?

Welcome to the Apple Community.
This may be an authorisation issue.
http://support.apple.com/kb/TS1389

Clip won't play audio in timeline

I can play and skim my clips in the event browser fine and can hear the audio, but when i bring it down in to the timeline the audio does not play only the clip, and yes in the toolbar the for the pop up menu for the append buttons all is selected, so both audio and video appear in the timeline...
Cold someone assist please?

The same thing is happening to me, just as Allan first described:
I can play and skim my clips in the event browser fine and can hear the audio, but when I bring it down into the timeline, the audio doesn't play, nor does a WAV form appear in the timeline. Once in the timeline, the clip only shows/plays the video without sound.
This is an entirely new problem for me ... Any help?

Movie clips won't play - OSStatus error -54

I am organizing all of my movie clips, some of which date back a few years. Since the last time I did this, something has happened and they will not play. I get the following error message: OSStatus error -54 Does anyone know of a solution?

You have the names of these files in iPhoto, right?
Download Find Any File
http://apps.tempel.org/FindAnyFile/
It's a search app that looks in places where Spotlight simply doesn't look. See if it can find them.
Cause? Updating the system won't do this, but there are a million ways things can go wrong. I wouldn't worry about Apple cutting iPhoto. The current version will run on 10.10 for the foreseeable future - that's at least another year. Even when the next OS comes out, it may run on that too. If it doesn't, well releasing the new Photos.app and upgrading the OS will not turn iPhoto off or stop it working.

QuickTime Clips Won't Play

I have some animated GIFs that I want to play in my movie. I saved them as QuickTime files and then imported the QuickTime movies into my movie and then dropped them into the movie.
However, when I try to preview the movie, they don't play. Instead, I just get a black screen for the length of the clip.
I know all the frames are there because I can see then when I slide the mouse left and right over the clip. However, I can't get the clips to play.

thepainguy wrote:
.. do you know if Final Cut Express supports this? That may be another reason for me to upgrade.
never tried but mostly doubt.. iMovie and FCE are meant for editing camcorder material... and anim.gifs never fullfill the standards of 'video' (PAL/NTSC/HiDEf) ..
but..
FCE allows to 'zoom' clips ... you should convert your anim.gif into something 'video-ish', e.g. a dv-stream, import to FCE, and 'shrink' the clip to a size, where it looks better in a video.. for sure, it dosn't 'fill' fullscreen, you'll get borders around it..

QuickTime movie clips won't play in video player

I have movie clips generated by my camera that are in Quicktime format that are in iTunes and iPhoto (playing in both) but will not sync to the iPad because they are in an "unsupported format"
I have a few other QT clips that did sync to the iPad from iTunes, but not all of them will transfer.
What is the problem?

Just because the videos from your camera are Quicktime, doesn't mean they will play on the ipad. Open the videos with Quicktime on your computer and get info, COMMAND+i. Here are the video specs for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format. http://www.apple.com/ipad/specs/

Streaming clip won't play

Similar Messages

Maybe you are looking for