Streaming Content and Adding/Syncing Content

Is it possible to add or sync movies/tv shows to apple tv but also have the option of streaming content?
I just finished setting up my apple tv. I had to enter a 5 digit passcode into my itunes and this allowed me to sync or manually add content to my apple tv. But, I also wanted to be able to stream content since I have about a TB's worth of music and movies/tv shows. So, I went back to the apple tv and had to enter another 5 digit passcode (this one allows me to stream). But now, I can't add files directly onto my apple tv. Can anyone help?

buschgobbler wrote:
Is it possible to add or sync movies/tv shows to apple tv but also have the option of streaming content?
Yes
I just finished setting up my apple tv. I had to enter a 5 digit passcode into my itunes and this allowed me to sync or manually add content to my apple tv. But, I also wanted to be able to stream content since I have about a TB's worth of music and movies/tv shows.
You can - the library set up to sync will automatically allow compatible content not synced and not deseleceted in main itunes media lists to stream - say you sync 20 movies, but have another 80 unsynced, then when itunes is running you'll see a combined list of 100 movies not 20. Turn itunes off and only 20 appear under My Movies as they can't stream unless it's running.
So, I went back to the apple tv and had to enter another 5 digit passcode (this one allows me to stream). But now, I can't add files directly onto my apple tv. Can anyone help?
You basically sound as though you changed it to a streaming library whcih can't sync.
Your're allowed one sync/stream library (primary/main whatever you want to call it), but can also connect to separate stream only libraries (streaming/secondary).
Sync library stuff appears under My whatever, streaming only under My Shared whatever entries.

Similar Messages

  • How to make a selection of a layer delete content and paste another content with Photoshop scripting..?

    how to make a selection of a layer delete content and paste another content with Photoshop scripting..?

    There is a more specific Forum …
    Photoshop Scripting

  • ITunes U Public Site Manager and adding new content

    Probably just me missing something, but I am in the iTunes U Public Site Manager looking to add content to an existing collection. Since the update, I can't seem to find the "add to collection" button that used to exist. Can anyone help? Thanks.

    Duncan,
    I appreciate your willingness to help. The site can be found here:
    http://deimos.apple.com/WebObjects/Core.woa/Browse/education-maine.gov
    I am the site administrator, and I want to add content to an existing collection. I have been adding content to existing collections since the site was created several years ago, but since the recent June 1 update to the Public Site Manager things have obviously changed and I cannot seem to find a way to add content. Maybe I am missing something obvious, but I can't seem to figure out how to do this.
    As a work around, I created a new apple ID and added it as a "user" and then as a "contributor" to the collection I want to add content to. I then logged out and then in again as this new contributor, and I was able to add the content as before (the update). I was hoping that I would be able to log in as the administrator and upload content without having to use another login.

  • Got a new itunes account and cant sync contents on new account

    MY daughter got her own itunes account. The account is on a seperate computer and I cant figure out how to sync her songs on to her account without deleting them from her ipod.

    Yes but you will need to authorize your computer for purchases on the old iTunes account.

  • Integrated planning Content and SEM-BPS Content

    Hi Experts
    Is there any integrated planning Business Content for CRM? Where do I find it?
    SEM-BPS has Business Content planning scenarios for CRM. Is this BC also available in BW-BPS now? Where do I find it?
    We use NW04s BI and CRM 5.0.
    Kind regards
    Erik

    Hello Erik,
    as of now I have not heard of such content.
    Also SAP is not talking about CRM-content for BIIP yet. What we have learned is that a lot effort is put into making the system stable and going for "additional" functionalities like BC later.
    What you could do is use BW-Business Content for CRM as far as possible (InfoCubes etc. ) and build the Aggregation Levels, Queries & Templates by yourself.
    Hope this helps
    Daniel

  • How to configure SharePoint 2010 / 2013 Search for SQL Database Contents and Oracle Database Contents?

    Hi All,
    We are planning to maintain the contents in SQL / Oracle. Could you please suggest anyone which is best for SharePoint 2010 / 2013 Search. How to configure the search for external content source?
    Thanks & Regards,
    Prakash

    This link explains supported and non supported scenarios to use Oracle for BCS
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/453a3a05-bc50-45d0-8be8-cbb4e7fe7027/oracle-db-as-external-content-type-in-sharepoint-2013
    And here is more on it
    http://msdn.microsoft.com/en-us/library/ff464424%28office.14%29.aspx 
    And here how you can connect Oracle to SharePoint for BCS functionality
    http://lightningtools.com/bcs/business-connectivity-services-in-sharepoint-2013-and-oracle-using-meta-man/
    Overall it seems SQL doenn't require any special arrangement to connect BCS to SharePoint.
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • Coping folder contents and sub folders

    So, I'm working on a little practice folder sync project (fun with my mac)...
    ...and I'v gotten hung up a bit because my little copying app doesn't seem to count folders and sub folders (which I suppose makes sense).
    My initial idea was to take just the date of modification and compare it to the last date that the app was run, inorder to only copy changed files. But this seems problematic on a few levels, so...
    So, my two part question is:
    1. Is there a simple command to copy folder contents and sub-folder contents, or do I need to tell the script to do each sub-folder individually?
    2. I imagine that a better way to manage which files/folders need to be updated is to create a file with a list of the contents, and dates of modification, and compare the new folder list and the old folder list to each-other... ok.. so, um. yeah. that sounds tricky.

    >1. Is there a simple command to copy folder contents and sub-folder contents, or do I need to tell the script to do each sub-folder individually?
    There are two common solutions to this.
    The first is to use the Finder's 'entire contents of...' command to get a list of everything in the folder, including sub-folders, the second is to make your script recursive - that is, it calls itself several times over.
    In the first case it's as simple as:
    tell application "Finder"
    set allItems to entire contents of folder "path:to:source:folder:"
    -- rest of code goes here
    end tell
    This can have problems, though, especially on very large directories since the Finder is not very efficient at building a list of hundreds or thousands of files.
    The recursive path is a little trickier, but you write a handler to process a folder then repeatedly call that handler, like:
    <pre class=command>on run
    set sourceFolder to (choose folder)
    processAFolder(sourceFolder)
    end run
    on processAFolder(theFolder)
    tell application "Finder"
    set allItems to items of folder theFolder as alias list
    repeat with eachItem in allItems
    if class of eachItem is folder then -- we have a subfolder
    processAFolder (eachItem)
    else
    -- code here to compare the file and back it up
    end if
    end repeat
    end tell
    end processAFolder</pre>
    So here you walk through the folder, each time you find a new folder, you walk through that until you're done. The code takes care of keeping track of where you are in the folder hierarchy.
    >2. I imagine that a better way to manage which files/folders need to be updated is to create a file with a list of the contents, and dates of modification, and compare the new folder list and the old folder list to each-other... ok.. so, um. yeah. that sounds tricky.
    There's no need to keep a file. Assuming you have two folders you can just walk through one of them checking to see if each item exists in the other, then copy the newer file to the other directory, like:
    <pre class=command>on processAFile(fileName, sourceDir, destDir)
    tell application "Finder"
    -- check if the files exist
    set sourceFileExists to (file fileName of folder sourceDir exists)
    set destFileExists to (file fileName of folder destDir exists)
    -- now comes the logic
    if sourceFileExists and not destFileExsits then
    duplicate file fileName of folder sourceDir to folder destDir
    else if destFileExists and not sourceFileExists then
    -- assuming you want a two-way synch
    duplicate file fileName of folder destDir to folder sourceDir
    else -- both files exist, so check mod dates
    if (modification date of file fileName of folder sourceDir) > (modification date of file fileName of folder destDir) then
    duplicate file fileName of folder sourceDir to folder destDir
    else if (modification date of file fileName of folder destDir) > (modification date of file fileName of folder sourceDir) then
    duplicate file fileName of folder sourceDir to folder destDir
    end if
    end if
    end tell
    end processAFile</pre>
    If you're not planning a two-way synch an even simpler option is to just keep track of the last time the synch was run. Then all you need to do on subsequent runs is ask the Finder for 'every file of folder sourceFolder whose modification date is greater than lastRunDate'.

  • Problem with "Insert" and "Overwrite Sequence Content"

    I'm working with XDCAM footage. I like to take all the individual clips recorded on the XDCAM disc, and after getting them into FCP, taking them and putting them all in a sequence in FCP, then using that sequence as the source in the Viewer. This allows for quick scanning of all the clips, much as is it were a digitized tape.
    I recently found the "Insert Sequence Content" and "Overwrite Sequence Content" commands in FCP, and like them in that they actually put the individual clips into my project timeline, and not just the combined sequence (which looks more or less like a nest when dropped into my project sequence).
    Here's the problem: When I put IN and OUT points in the timeline, and "Insert or Overwrite Sequence Content" using the sequence containing all the clips, the video tends to be contained to between the IN and OUT points I set in the TIMELINE, but the audio tracks tend to expand past the OUT point I set in the TIMELINE, and I can't figure out why, or how to get around this.
    Any assistance would be appreciated.

    If you're inserting or overwriting, you're basically pasting the content that you've chosen. I wouldn't think the out point would be recognized, or even wanted. If you copied 5 minutes of clips and inserted it into a sequence with a 4 minute in/out point duration, do you want to only have the first 4 minutes inserted into the sequence? If you only place an in point, it will insert all the clips, starting at that point, and it will take up as much time as the clip content's duration.
    Am I missing something here?

  • Read Outlook Email and Get Specific Content from Mail with PowerShell

    Hi Everyone,
    I would like to get full content value by searching in mail body with PowerShell but I stuck at one place in scripting and would required help from your side. Below is my script with description.
    #Connecting Outlook with below command
    $Outlook = New-Object -ComObject Outlook.Application
    # Now getting all folders info in variable (Shows Email, Calendar, Tasks etc)
    $OutlookFolders = $Outlook.Session.Folders.Item(1).Folders
    #Now connecting Inbox mails
    $OutlookInbox = $Outlook.session.GetDefaultFolder(6)
    #Now reading latest mail
    $latestmail=$OutlookInbox.items | select -last 1
    #Now calling email content and getting email content as output in html
    $latestmail.HTMLBody
    #below is output
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
    <HTML>
    <HEAD>
    <META NAME="Generator" CONTENT="MS Exchange Server version 14.00.0004.000">
    <TITLE></TITLE>
    </HEAD>
    <BODY>
    <!-- Converted from text/plain format -->
    <P><FONT SIZE=2><A HREF="https://test.abc.com/sys/servlet/ViewFormServlet?f
    orm=NTE%3aNotifier&server=sm.user&eid=NTS000299462947">https://test.abc.com/sys/servlet/ViewFormServlet?form=NTE%3aNotifier&server=sm.user&eid=NTS4556555
    294437</A><BR>
    <BR>
    Incident IND000008655308 has been assigned to your group 'Windows
    ADMINISTRATION'.<BR>
    Company: ABC<BR>
    Customer Name: XYZ<BR>
    Service Type: Infrastructure Event<BR>
    Priority: High<BR>
    SLA Resolve Target Status: Within the Service Target<BR>
    SLA Response Target Status:<BR>
    Reported Source: Systems Management<BR>
    *******************************************************************<BR>
    Summary: server1.abc.com: Average (5 samples) total cpu is now 100.0
    0%, which is above the error t<BR>
    <BR>
    *******************************************************************<BR>
    Notes: server1.abc.com: Average (5 samples) total cpu is now 100.00%
    , which is above the error threshold (100%)</FONT></P>
    </BODY>
    </HTML>
    # Now my target is to search incident number which is starting from IND* and server name (server1.abc.com). I tried below code but not getting value. Please help me to get these two values from email.
    $latestmail.HTMLBody -match "IND"
    #Output
    True
    #but not getting full that is IND000008655308.
    Please help me.

    Try this:
    if($latestmail.HTMLBody -match 'IND(?<x>\d+)\S'){
    $value='IND'+$matches['x']
    }else{
    Write-Host 'Not found'
    \_(ツ)_/

  • Sync some content and stream the rest.

    I have 1 itunes library on my G5 and as i have the original ATV with only the 40gig HD i was wondering if at all possible can i sync some content and stream the rest. Not sure if i have set this up correctly but i cannot achieve both. I have to swap between the synced and streamed and everytime i do this my ATV loses all synced content. If this is achieveable can someone help with setting this up. Thanx in advanced.

    Thanx for the quick reply, i have tried this on several occasions but this has not worked. Cant hurt to try again. When you refer to syncing library, this being the one in itunes and from my ATV set it to connect to itunes and once it appears under summary set it to custom sync.

  • HT1386 How can I get local content only to sync FROM my library to my Iphone and not the other way around?

    Ever since ICloud, my local Itunes library has been poluted with old music that I got rid of a long time ago.
    I purchased an album from the Itunes Store App on my Iphone, listened to all the songs and decided I don't like all of them but some of them.  So I went on my laptop and the album I purchased loaded into Itunes.  I manually deleted the content I didn't want from my Itunes library.  Once my library was set the way I wanted, I wanted my Itunes library synced into my Iphone, but instead, my Iphone's content gets re-synced back into my Itunes library and the content I once deleted tries to re-download.
    It's agrivating that what was once an easy automated process is now a slow agonzing manual process.  I'm considering getting rid of my phone if I can't find a remedy for this, which is the only apple product I now own.
    I don't want ICloud to auto download content
    I don't mind streaming the old music on my Iphone but I DO NOT want it downloaded into my phone or into my library.  I like to keep ICloud and my Itunes Library seperate.
    I just want to click "Sync" on Itunes, and my phone syncs EXACTLY how my Itunes library is.
    Please help...

    Backup, then restore the iPhone without syncing. Only the content currently in your library can be restored back to it.
    Turn off all options in iTunes and on the device for automatic downloading of purchases.
    In principle purchases made on the device are copied into the iTunes library when syncing. This ensures that you have the media ready to place back on it or a replacement should the device be lost, stolen, damaged, or need restoring, When you want to remove content either delete it manually from both the device & the library at the same time, or uncheck it within the library so that it is removed from the device during sync, then remove from the library later.
    tt2

  • HT201274 I was given an iphone 4s by my sister as she got a new one, now i want to clear it so that i can set it up with my own details, if i erase all content and settings will this affect anything on her new iphone as it is synced to the same gmail acco

    I was given an iphone 4s by my sister as she got a new one, now i want to clear it so that i can set it up with my own details, if i erase all content and settings will this affect anything on her new iphone as it is synced to the same gmail account

    her contacts are connected directly with the Google Server so as long as they are saved to her Gmail account she should be 100% fine.. the only contacts she may lose are the ones that she added directly onto the phone and did not sync to her Gmail account.. so you should just double check with her on that

  • I'd like to sync my iTouch and iPad with my PC, and have the content (both iTunes and uploaded music) on the devices override the content on the PC, but cannot seem to find a option to do that. Can anyone help me?

    I had to have my PC wiped clean and the OS re-loaded. I thought I backed up everything  on my iTouch and iPad correctly, but when I try to sync, I'm getting a message that if I continue with the sync, I will lose everything on my device. I'd like to sync and have the content (both iTunes purchased music/apps and uploaded music) override the content on my PC, but am unable to find a way to do that. I have the first gen iTouch that does not support iCloud. Can anyone help?

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • How can I export files from my ipod classic and reset it without losing content and syncing it to a new library?

    I'm trying to export the files that exist on an ipod classic. It belongs to my girlfriend, and she doesn't want to lose any of the music on it. But she wants to sync to a new PC and not lose the content. So, I want to export all the files and then place those files plus start a new itunes library with it. If I were to sync to my PC, would it erase all of the existing data? Can I buy/download a program that would allow me to upload all of the existing content on her ipod classic to my PC and then take that and place it back on by syncing it through her new laptop and adding the exported files....?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • After Syncing Content and Putting ATV on standby - No Content is there

    I Synced all of my TV shows to ATV last night and put ATV on standby before going to bed. When waking up this morning and turning ATV on I noticed there were zero TV shows and ATV said that I needed to open my ITunes -- Once you sync content, isn't it saved on the ATV harddrive?
    Please help. Thanks.

    If you are syncing then yes the data should be on the hard-drive. If just streaming then need ATV open.
    Also ensure what settings you have for TV syncing. If for example you have it set to 5 most recent unwatched shows but you had watched them in the past, then they won't sync and require iTunes open to list to stream.

Maybe you are looking for