Streaming does not resume

Has anyone else suffered the problem that streaming does not resume on an iphone 5 handset? and if you have is there a known solution for it. It worked on the iphone 4 to my car stereo but now on the iphone 5 I have to manually press play again. Pairing occurs automatically tho. Just annoying more than anything as they both support the same bluetooth profiles.

Hmm, well FMS has some troubles with living for the long haul on virtual machine environments and it usually comes back to how those VMs present their network. When the VM does bridged network for instance it's sharing time with the proper OS to get connection traffic for its applications. The unfortunate nature of that was that when we tested the performance for network sharing from an FMS out of a VM was so bad that it couldnt' be supported as a good configuration. Consequently we recommend to most deployments of 'don't do that'.
If it has to get solves and has to be a virtual machine, then I'd recommend playing with the various network modes to see if you can find one that's going to play happier with the server's 24/7 networking needs. It seems like the VM/FMS combo is the problem then that's where I'd be looking.
Asa

Similar Messages

RTMP Live Stream does not resume with Spark VideoPlayer Component

Hi all
The Flex 4 framework brought along the VideoPlayer component, which supposedly can automatically choose the best stream in terms of bitrate from a list of available multi-bitrate streams, play live videos and everything.
See http://help.adobe.com/en_US/flex/using/WSc78f87379113c38b-669905c51221a3b97af-8000.html for some information about it.
Here's a working example for an MXML application under the Flex 4.1 framework:
<s:VideoPlayer width="100%" height="100%">
    <s:source>
        <s:DynamicStreamingVideoSource streamType="live" host="rtmp://88.87.56.214:1935/live/">
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="19200"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="9000"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="3600"/>
        </s:DynamicStreamingVideoSource>
    </s:source>
</s:VideoPlayer>
The streams are valid and they play. However, I'm bumping into a problem when the stream is paused: it will not resume.
The player state alternates correctly between 'playing' and 'pause' when you keep clicking the play/pause button. However, once the first stream pause(or stop) occurs, the image and sound seem to freeze...forever.
Any help ore guidance are most appreciated!

I'm also facing the same problem.. Any developments in that ?

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

Requested stream does not exist?

So, I created several Encore projects about a month ago (this is a large project, 15 DVDs). I receive final edits back from my client, completed them in Premiere Pro CS6, and then exported them to m2v/wav via AME.
I successfully re-linked one project with its new transcoded files and was able to output to an iso. On my next project, however, as son as I linked the transcoded files to the project, I receive an error stating that "requested stream does not exist". When I click ok, I am presented with this dialog repeatedly, until I force quit the application. This project, unlike the last one, has motion menus.
Am I doing something wrong? I haven't changed any other aspect of the project, beside re-linking the newly transcoded files for the main timeline and setting the output directory through the Build menu. I should mention, than in rare instances, I am able to view the project just fine, however it is clicking on the Main Timeline that causes it to go into the "requested stream..." loop.
Thanks in advance for your help. I'm feeling really stuck.

I am using a dynamic link to link to the specific sequence within the prproj file. The re-linking I'm speaking of is when you right click on an asset that needs to be transcoded and select "Locate Transcoded File". I have pre-transcoded the associated sequence for each project.
I don't recall anyone using that workflow. Makes me wonder why you would dynamic link, but perhaps there are advantages as you get the first version set up.
You can "locate transcoded file" for an untranscoded asset; had not realized that before.
Since your project was done once, the PR sequence in Encore shows as transcoded (before you relink). Try "revert to original" before you relink.

HT201317 Has anybody an idea, why my jpeg-picture uploaded to Photo Stream does not appear on my S4 like all the other pictures before? Ok, it's 4 years old, but JPEG and taken with a digital camera...! I'm despaired after trying since days...! Thank you!

Has anybody any idea, why my jpeg-picture upoaded to Photo Stream does not appear on my iPhone S4 like all the other pictures before?
Ok, it's a 4 year old picture, but taken with a digital camera as jpeg...! This cannot be the problem really, but I'm despaired after trying since days...! Thank you all for any hint you've got for me!

If you asking me, I would suggest to additonally use a second storage service which also allows you to store your pictures over the 30 days period. I personally use Dropbox with automatic upload for that (https://db.tt/cMEgDUFZ), but there are also other storage services like Flickr for example.

Datek Streamer does not work with JRE 1.3.1_01

I am unable to load the Datek Streamer applet (www.datek.com) when using the JRE 1.3.1_01. I have tried using the JRE with Internet Explorer 5.5 SP2, Netscape 6.2, and Mozilla build 2001112104. In each case, the message "Java applet loading" appears in the space where the applet should display. Then the message disappears, leaving just a blank display area. This problem does not occur with Internet Explorer 5.5 SP2 using the Microsoft JVM.
Any suggestions?

Glad to see I'm not the only one. I've tried JRE 1.4 beta3 on NS 6.2.1 and datek streamer does not work on that setup either. Read through a bunch of the forums and looks like there are some related issues. The two I saw crop up the most were NS 6.x internal embedding issue and a LiveConnect security hazard issue. Not sure if anybody figured out a permanent solution though.
Running Win2K, NS 6.2.1, JRE beta 1.4. Datek Streamer applet dies right after it loads the last file (usually the datek logo gif).
If anyone finds a solution/patch please post.
Thanks

HT4890 Photo Stream does not seem to be updating on my PC. What should I do?

Photo Stream does not seem to be updating on my PC. What should I do?

Try signing out and back in to the iCloud control panel.

HT4906 In my iphone, photo stream also counts in storage space but as per Apple Photo Stream does not occupy storage space. Any info on this pls.

In my iphone, photo stream also counts in storage space but as per Apple Photo Stream does not occupy storage space. Any info on this pls.

And
Does this involve iPhoto in any way?
LN

HT4890 photo stream does not appear on my icloud, where is it???

photo stream does not appear on my icloud, where is it?

You won't see it on icloud.com. It is only accessible by using an iOS device or computer that is signed intoyour iCloud account with photo stream enabled.

Canon 60D does not resume after auto power off

My Canon 60D does not resume after auto power off. It shows the empty battery icon when I press the shutter button, even the battey is fully charged. If I remove the battery and insert back it will resume to work. Any one had the same experience and know how to resolve it?

The power switch is actually a "software" switch. It's not like a light switch in that it doesn't actually provide or deprive the camera of power... only removing the battery will deprive the camera of power. This is why it doesn't actually just go dark when you switch off power... instead you'll usually see it perform a sensor clean cycle and then power down. The camera is technically in a kind of "sleep" mode monitoring the switch. If a Canon camera ever seems to lock up and ignore all input, the battery should be temporarily removed to "reboot" the camera. There is no "setting" in a camera that can configure it to ignore buttons. Although... if the camera is in an automatic mode, some input is deliberately ignored to make it easier to use the camera. Put the mode dial in a "creative zone" mode (P, Tv, Av, or M) and all buttons and menus should be accessible. You might try connecting the camera via USB cable to your computer and then attempt to control the camera via the Canon EOS Utility to see if that works. If the camera responds fine to the computer control, then likely the camera's main board and circuits are working fine and it may just be a wiring problem -- as if some cable simply isn't getting a very solid connection. If this is a wiring issue, you are probably better off sending it in for service.

My photo stream does not seem to be working as before with the new PHOTOS update. some of my devices are not getting the uploads/downloads

My photo stream does not seem to be working as before with the new PHOTOS update. Some of my devices are not getting the uploads/downloads, anyone have this problem?

Recommend that you post your question in "Photos".
Remember, Photos is not a replacement for Aperture.

Listening to audiobooks does not resume in the correct spot

I bought a brand new Ipod Shuffle 4th gen. When I play audio books it resumes 30 minutes behind where I left off last. Is there any way to stop this?

P,S. I have already checked "Get Info" and "Remember Playback Position" is check. This is an audible.com audio book that I was listening to on my old shuffle which no longer works. I bought a new one and the same audio book does not resume correctly. It does not resume at the beginning of the book but about 30 minutes behind.

Zen 300 does not resume playback at same place after shutting down.

My Zen 300 does not resume playback at the same place in the audio file after the player automatically shuts down (idle shutdown) when I turn the player back on. It returns to the beginning of the track. How can I ensure playback resumes after automatic shutdown?

GThis is normal for Idle shut down my zen 300 does this to me to. I don't think there is a way to stop it though but if there is then the creative lab support people should be able to help just send them an email.
By the way does anyone know how to create tasks for the zen 300? I tried with no luck.

I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help, I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help

I cannot sync Xerox M138 Printer with my Macbook Air. Printing is paused and does not resume. Please Help.

I FIXED IT MYSELF.
I simply let the iPod run out of battery.
Then it said CONNECT TO POWER.
And then I did.
And after 15 minutes, it worked!
Self-solved problem!

10.5.8 does not resume wired ehternet after resume from sleep.

I am new to administering macs but have many years linux experience.
I have a imac here that does not correctly wake from sleep.
It assumes an generic IPV4 address instead of resuming its lease.
Here is some data from the kernel buffer running dmesg:
previous Sleep Cause: 0
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
0 [Time 1271523730] [Message System Sleep
Wake reason = EHC1 EHC2
System Wake
Previous Sleep Cause: 0
USB (EHCI):Port 2 on bus 0xfa has remote wakeup from some device
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Half-duplex, No flow-control, Debug [796d,4c08,0de1,0200,40a1,4000]
[/code]
Things I have tried:
Searching here in these forums.
I have set the networking order in system > prefrences to put en0 first.
and disabled other services, network sharing, ipv6 etc.
I can correct the problem in the terminal using:
ifconfig en0 down
ifconfig en0 inet 192.168.0.2
ifconfig en0 up
however this is obviously not satisfactory for the user.
I read another post here about a 2nd dhcp being installed and conflicting with dhcp.
I am not sure how to check this but appears to be a dhcping: here is the output of locate:
locate dhcping
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dhcping
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dhcping/Por tfile
However I do not think it is "active" as which dhcp does not return anything.
Where are networking configuration files stored?
Is there somewhere I can set the IPV4 fallback IP address?
Or how about setting the DHCP timeout?
Thanks for any input / ideas.

Hmm thanks I have tried to reset the lease and looked at the advanced settings.
Nothing in the network pane fixes the problem reliably.
I suggested the same option to the user with the sleep issue and that solution was rejected as it saves more energy send the kernel into sleep mode.
The problem seems to have appeared after a update to 10.5.8.
Perhaps I will try to revert the computer back to 10.5.7. to see if the issue goes away?
Is there a "package manager" (like portage or apt-get?) for OSX system applications or is it just a release?
Perhaps I could just revert the DHCP application or the network manager as on linux?
Here is a link to that other post: http://discussions.info.apple.com/thread.jspamessageID=11088284&#11088284

Streaming does not resume

Similar Messages

Maybe you are looking for