Streaming flash media server to the world and not just your local network
hello, i have downloaded and installed flashe media server.....but i have som problems which are: i am on a network which is connected to the internet and i was able to get the ip of my pc using the comand prompt (i.e typing ...ipconfig/all....in the comand prompt window) ...i used this ip in my flash media encoder in place of "localhost" in the fms url, and i was able 2 connect fine ,i the copied my fms url to the osmf player and i generated my html code and put it in my webpage and everything did work fine, but the proble is that only the people who are on thesame network with me were able to view the video on the webpage wereas people in other countries could not view the video....... so please how can i be able to make my video acessable to the whole world ,because i work in a television company and they have asked me to undertake the task to stream thier broadcast online to the whole world........please i would like u to put me through the right things to do because have been having sleepless night on flash media server.....would be expecting a reply from anyone who can help me as quick as possible. thanks
Hey Kristich,
Is the server that you have created behind some NAT, etc?
If you are using an IP of the form 10.x.x.x or 172.x.x.x or 192.168.x.x then these are private IPv4 address spaces and not public IPs(which is unique), and you wont be able access them from outside.
Similar Messages
-
Ok, so my whole family has the same apple ID so that we can all get the same music, and we want to be able to use icloud so that when one person buys a song it will push to all of our devices. But the problem is when I want my calendar on my mac to also be pushed to my phone it pushes to all of my familys devices. How can i keep the music pushed to everyones but the calendar and notes just between my phone and my mac using icloud?
Oops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.
-
when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?
Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.
-
How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?
Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L -
In Imovie 2008 when I drag an event to another drive, the event is copied and not moved. Thereafter if I try to move the original clip to trash I anm warned the clip will no longer be accessible in the project it is linked to. How do I get to move the clip and keep it connected to the project?
I have iPhoto '09. The problem occurs when I try to move a photo from iPhoto onto a document or anywhere. I click on the photo and try to drag it to the document. When I do this a message box pops up saying that the file cannot be opened because it is empty. This only happens with a small number of photos but I just don't understand the fact that I can see these photos (and print them but only directly from iPhoto) but I can't do anything with them since, for some reason, the computer is seeing the file as empty.
Hope that helps. Thanks. -
Flash Media Server 4.5: HLS and Applications Interaction
Hi,
We are deploying FMS 4.5 on our farm and we thought that all the business rules at our FMS applications would be reused on connections from iDevices (HLS). This has not happened.
Is there any way to reuse the business rules which are on our FMS applications and access plugins to HLS content delivery? We mean business rules as geolocation authorization, hash check and lock services.Hi,
something similiar i have discussed on this forum, here:
http://forums.adobe.com/thread/942073
I think you must write an iOS app for all your needs and try to solve this outside FMS - in your apache to be more concrete.
For authentication, we've tested this:
- adding basic user/pass authentication to the location hls-live (in httpd.conf)
- viewing the stream through browser via https://user:pass@name-of-the-server/..../..m3u8
(user/pass sent encrypted via https, you need a certificate on the server to do all this)
That way, only authenticated user will view the stream.
(did it for the hds-live also)
not sure if this will work with iOS app though... my best guess is - it would.
I think that nothing you have server side as a asc script for rtmp will work for http streaming, someone correct me if i'm wrong...
I REALLY hope that some next version will include anything related to HLS protection in this context. -
Flash Media Server 4.5 Interactive and VMWare
Can anyone speak to if FMS 4.5 Interactive is supported in a VMWare environment? If so, what are the resource requirements? I'm not getting any firm information from searching around so I'm hoping someone here can offer some insight. Thanks!
yes it is suported .... vmware environment is totally indepedent of any application related specifications.. go ahead to install it in your virtual machine .. it should work fine... make sure that you bridge the network adapters to make it accessible to your LAN or via your Static IP through WAN
-
I can get airplay to work between my Macbook Pro and iPhone 5 at my office but when I'm at home airplay will not work. Does anyone know what may be causing this issue? Thanks!
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
Sometimes the question comes up of the top of the screen" do you want to save this password" which is great. But it does not always come up...this is the problem. I can't seem to locate where to find this application? Can you help?
Saved Password Editor extension has a feature that allows you to add passwords / usernames to Firefox manually. <br />
https://addons.mozilla.org/en-US/firefox/addon/60265 -
Live Streaming with flash media server
Hi,
i am installing flash media server 5.0. And its working perfect locally, I need to publish my video through my own IP address. How can i configure local to serverThanks for the response
I m having Flash Media Server 4.5 . It works correctly in localhost. I want to make it online. I found a way, that place public ip address on the fms.ini file. I did it, but it does not work for me. How to fix this? -
Record playback is very slow between Flash Media Server and Flash
hi all
I have done server side recording successfully with red5 flash media server and can see
that the flv record is being created properly.
Then if I try to playback the record like
NetStream.play("record.flv"), I see that stream playing is very very
slow, for both of audio and video.
And then if I try to playback the recorded file via using the
filesystem path of it, everthing seems fine.
Problem occurs when I try to sucscribe and play the stream of the record.
PS : There is no problem with playing the published stream
(NetStream.play("streamName"))
Does anyone have an idea about this issue?
If you need any additional information, please let me know.
Thanks in advance
RegardsIn a nutshell flowplayer delivers the video through your web
browser. It does this via http protocol (port 80) and progressive
download on any web server
Progressive download finds the video on the server and plays
it back through the player as it is being downloaded. 2 important
things to take from this are 1, the video is being downloaded to
the clients hard drive, at the end of the playback they will have a
copy of your video that they can do whatever they like to and
repost it somewhere else. 2, It plays back as it downloads, meaning
if I'm viewing a 10 minute video from your site and want to skip
ahead to the middle or end I have to wait for the whole video to
download before viewing those segments. Your web host by the way
will love you for progressive download because it will appear as
though your transfer rate has gone through the roof. Once the
request for the video is made there is no turning back, the client
gets the whole thing whether they watch it or not.
Flash media server uses the rtmp protocol. This protocol is
an open socket protocol through port 1935. This is a two way street
essentially. When the user views a video using FMS they basically
get only enough of the video to keep the connection open and
satisfy the required buffer to assure clean playback. The bytes of
info that carry the video only go to the users memory, not the hard
drive. This allows the user to jump back and forth around in the
movie without having to wait for the whole thing to download.
Hope that helps. -
Is Flash Media Server the software I need?
Hello!
A client needs a Flash streaming software to best serve the following:
750 Mb/s Internet bandwidth
Average 7 minutes video length
Average 1,100 video requests
3,500 video requests at peak hours
99,9% SLA
Will Flash Media Server do the job or will I need something else?
Thank you very much for any ideas.> 750 Mb/s Internet bandwidth
Sure, FMS can handle 750Mbps of throughput
> Average 7 minutes video length
Not an issue. It doesn't matter how long the videos are (although on a 32 bit OS, the file size has a limit of 2GB)
Average 1,100 video requests
Assuming the server has adequate hardware and network resources, 1100 concurrent streams is realistic.
>3,500 video requests at peak hours
A single FMS won't handle that many concurrent streams. You'd need to distribute the load across at least two servers for that capacity.
>99,9% SLA
There is no SLA associated with the software. That's something your hosting provider would be responsible for, and it wouldn't apply to FMS... just to the server FMS is running on. -
Domain issues with Flash Media Server
I have a webcam streaming to Flash Media Server via the Media
Encoder. I have published the .swf file with the flash player and
rtmp://99.999.999.999:1935/live/livestream address to my website on
a hosted webserver.
When I am on another internet source, the player on my
webpage loads and works fine. However when I load the webpage in a
browser on the same network that has the Media Server and Webcam on
it, the browser freezes up.
I need some help with a solution that will cause the rtmp://
address to switch to a local host address. Any suggestions.quote:
Originally posted by:
JayCharles
Yes.. you can.
But my old version of Flash MX show me an error message when
I try to open "CommunicationComponents.fla" which contain the
components of Flash Media Server 2.0.1.
My old version of Flash MX can't read this file and say
something like "Unexpected file format". -
Slow connection to flash media server 2 (with HTTP Tunneling)
Hello,
I use a FMS2 for a big project which include Instant
Messenger and
streaming video.
On my development platform. I have no problem. But in the
final
configuration, the connection to Flash Media Server takes a
lot of
time (about 2 or 3 minutes) and i can't find why.
FMS2 was installed on Windows 2003 Server behind a proxy and
a
firewall which only let the hostport 80 oppened.
The server does not run a web server (or anyother
application) which
use this hostport.
The connection are established by HTTP Tunneling.
Does someone already have the same problem?
Thanks for your answers and sorry for my poor english level.
GuillaumeI forgot to mention:
Flash Media server is running fine. I can log into the Admin
application no probs.
I created a folder called "test". Inside that folder I
created another one called streams and inside that folder I created
a folder called _definst_.
I placed an flv file called: test.flv in to the _definst_
folder.
In Dreamweaver CS3 I inserted a Flash Video File:
Chose Streaming as the option and for the RTMP path I put:
rtmp://ipaddressofserver/test/_definst_/test.flv
Called the stream....test.
When i run the page it loads, but the page is blank.
In the Flash Media Server, in the "View Applicationd" tab
I get the record of test and underneath it in the same link
it says test.flv with 1 client
The Streams tab shows a random name and Netstream.
This tells me its recognising the connection and link, but
the movie is not on the page
any help would be appreciated
cheers -
Flash media server enterprise 4.0 allowing no one but my site to use flash player
so i was getting people embedding my player to there site and stealing my thunder.. so i changed allow all to my domain and well i cant connected with fme how to correct this thanks
i tried still no go but here is a screen shot of fmse
Date: Tue, 4 Oct 2011 08:36:36 -0600
From: [email protected]
To: [email protected]
Subject: Flash media server enterprise 4.0 allowing no one but my site to use flash player
Re: Flash media server enterprise 4.0 allowing no one but my site to use flash player
created by SE_0208 in Flash Media Server - View the full discussion
Wait a minute - your URI should be rtmp://ip/vod.mp4:sample1_1500kbps.f4v and i think your code should be as below (made "live" to false as its VOD file) <!start_raw> flowplayer("player", "flowplayer-3.2.7.swf", , // streaming plugins are configured under the plugins node plugins: } });</script><!end_raw> try and let me know
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3953024#3953024
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3953024#3953024. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Media Server by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
I am looking for simple step by step assistance to restore 2 missing and important (to me) libraries in iPhoto via Time Machine. Used iPhoto Buddy to create 8 libraries and this worked well until yesterday. Now these missing libraies are just marked
-
Multi Core Mac Users: Dynamic Link, AE, and Warp Stabilization.
Now that Final Cut X has lost it's edge .. and more Mac users may be migrating .. here is some input : Stabilization was the most important 'effect' which prompted me to buy a 12 Core Mac, CoreMelt's Lock & Load Stabilization AE Plug In, and the Adob
-
Regarding Filter Option in ALV LIST
Hi, I am using LIst to display the report output. The filter is not allowing me to perform the function. The filter Criteria is giving out dump saying An ASSIGN statement in the program "SAPLSDH4" contained a field symbol with length 0. This is not
-
Is The Iphone 5 really worth the upgrade?
Im wondering if I should buy the IPhone 5 now or wait for the IPhone 6 (Set to come out in Sept.- Nov.) I mean... there is alo of people who say the 5 is noth worth it...
-
Why is my wifi slow on Windows 7 and not Mountain Lion?
I have Windows 7 installed through boot camp. I purchased my MacBook Pro new 2012. When I use wifi in Mountain Lion, it works great. When I boot into Windows 7 I get SUPER slow speeds. OSX I get full speed at 60 Mb/s. Windows I get 1 Mb/s or low