Streaming internet to TV using WET610N

I have a Linksys E4200 Router - (great!) I have hooked up a Linksys WET610N Bridge to my Sony BluRay and have a good connection.  (I have updated the Sony firmware so know it works)  Now, how can I configure this setup to allow me to stream movies and other content from the internet to the HDTV to which the BluRay is connected?  
Linksys advertises the Bridge as a means to stream movies but I can't find how to get videos from the internet, or my Mac, to the TV.  Any ideas will be appreciated.

So first of all I would like to inform you that if you can upgrade the latest firmware on the Router which can be downloaded from the CISCO website ( homrsupport.cisco.com )
Once you done with the upgrading of the Router then reset the Router and Reconfigure it.....
As far as wireless is concern do the following settings:
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161..
Then connect the configured WET610N with BluRay scan the network from the Router and try to connect it....
After doing these steps then  to stream movies and other content from the internet....

Similar Messages

  • I stream Internet radio from my iPad air to Bluetooth speaker.  Can anyone suggest the best EQ app to use to enhance the sound.  Thanks

    I stream Internet raidiot from iPad air to Bluetooth speakers.  Can anyone suggest the best EQ app to use to enhance the sound.
    THanks

    Yeah, I know I can restore it, but I might as well go ahead and try. I just finished a backup for icloud and itunes to make sure, I'll go ahead and restore it and set it up as new and see how that works. Seems like I have no other options at this point, I'd still like to know what they did with the Download tab in itunes store, if they removed it or if I'm just overlooking it.

  • Listen to streaming internet using N97 mini over A...

    I know that the CK-600 kit will play your music from the N97 onto a car stereo via the bluetooth and into normal aux in cables in a car stereo...
    But is it possible to use the N97 to stream internet radio using the phone's 3G connection and onto the car stereo via A2DP?
    My question is basically whether the Nokia can broadcast internet "audio out" in the same way that is does on the music player on the phone... and be used as an internet radio on the go..
    Thanks for help

    Hi
    Not sure which internet stations you want to listen to on the move but just tried the \Absolute app and the Mobbler app off Ovi and that works ok.  It would be the 3g Connection that would be the problem I imagine and how clear you want the music.
    Hope this helps
    Nokia Accredited Car Kit Engineer
    e:[email protected]
    www.inekar.com Please Kudos me if you think I help!

  • While streaming internet radio via itunes, the music hangs up and stalls whenever i do anything online

    While streaming internet radio via itunes, the music hangs up and stalls whenever i do anything online

    Rode32 wrote:
    this issue just arose over the last month or so and no changes have been made to my bandwidth.
    Except for the following possibiblites:
    Your bandwidth might be being throttled by your internet provider.
    Your internet may have a fault.
    Perhaps your Wi-Fi security has been breached by someone nearby.
    Perhaps the other services (Grooveshark and Spotify) use a lower bandwith (I don't know).
    For numbers 1 & 2, try a speed check to see if your internet connection is as fast as it's supposed to be.
    For number 3, change your password to your Wi-Fi.
    For number 4, check the Bit Rate of each stream.
    On the other hand, if this new information that you added is fact ( it actually occurs if I even listen to music from my iTunes library, not just internet radio ), then perhaps iTunes is at fault and the best fix may be to repair iTunes.
    To repair iTunes, download the iTunes installer and when you run it, use the Repair option.            

  • Revised: can I stream internet content from a cell phone network to the apple tv?

    So I am trying to stream internet content from my iphone (phone network) to the Apple TV. I currently do not have internet at my house. What I do have is a macbook pro, airport express, ipad (wifi only), and of course iphone and apple tv. So is there a way to configure these devices to somehow stream my phone content to my apple tv. As of now the only way to connect the iphone to the apple tv is through wifi; the bluetooth that apple tv supports is elementary and will not support this connection. When the iphone is on a wifi network it automatically tries to use it for internet content. So 1 option would have to be a work around for making the iphone use the cell phone network for pulling internet content and using the wifi to broadcast this content to the apple tv. Another option would be to connect the iphone with the macbook pro via bluetooth (somehow) and then mirror the macbook pro to the apple tv via the wifi network setup with the airport express. ANY IDEAS?

    You wouldnt be able to to use both networks at the same time. Either need to connect the Apple TV to the cell network (which will require a lot of data and impact battery life) or get a home plan and broadcast over the local network (wifi)

  • IPod speaker/dock that can wirelessly stream internet radio from our Apple TV?

    Our Apple TV 2 is downstairs. I use it to listen to internet radio streams all day. I'd love a speaker system for upstairs that can dock and play iPods, but also stream internet radio from the Apple TV downstairs. Does such a product exist? TIA for any pointers.

    Your church services presumably have a specific internet address which you view in a browser?
    If so and you have a fairly new iMac you could start playback on the iMac in a browser and use Airplay Mirroring to send a 'copy' of what is on-screen to your TV using AppleTV to display it.  The same would apply to modern iPhones (4s and later) and newer iPads provided the phone can play them in a browser (maybe not if the stream id Flash based).
    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    AppleTV does not have an internet browser.  It is primarily a device to play content from your local iTunes library or from iTunes store via the internet (purchases or rentals).  It does have certain 'channels' like YouTube, Netflix etc which you are probably not interested in.
    AppleTV needs to be connected to the same network as the iMac.
    If your iMac is too old for Airplay Mirroring, something like AirParrot might work in software.
    AC

  • Apple TV freezes on screenlock when streaming Internet TV via iPhone 4. Difference in IOS5 vs IOS6?

    Hello everybody!
    I have an iPhone 4, upgraded to IOS 6.0.1 and a newly bought Apple TV with upgraded software. My iPhone 4 worksperfectly with the Apple TV with one exception: Streaming of Internet TV to Apple TV freezes when the iPhone is Auto-locked. As my iPhone is configured for business use, it is not possible to configure it to disable auto-lock, and as the longest auto-lock time is 5 minutes, watching TV is pretty annoying ....
    The strange thing, however, is that a friend of mine also has an iPhone 4, assumingly with the same business configuration, where the streaming of Internet TV continues (video and sound) also after the iPhone goes into auto-lock. In addition, he strongly claims that streaming Internet TV does not affect the battery consumption of the iPhone at all, indicating that the streaming does not physically goes through the iPhone, but directly from the router of the network to which the iPhone is connected (i.e. the streaming is only initiated by the iPhone, not relayed).
    Does this make any sense to you? Is this an IOS 5 vs. IOS 6 issue? How do I get uninterrupted Internet TV streaming from my iPhone? If relevant, I have a DLink DIR-655 router.
    In advance, thanks for all help.

    OK.  I turned all devices off, including router, then turned everything back on.  I also did a RESET and a RESTORE on my Apple TV, but still have the same problem.  I put my MacBook Pro right next to my Apple TV, and iStumber indicates I have a good wifi signal.  Any suggestions on what to check next?  Thx

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • HT5167 WIFI dropping all the time in Lion 10.7.4 or internet. I use an iMac 3.33 GHz Intel Core Dou

    WIFI dropping all the time in Lion 10.7.4 or internet. I use an iMac 3.33 GHz Intel Core Dou

    Remove the Norton/Symantec product by following the instructions on either of these pages:
    Uninstalling your Norton product for Mac
    Removing Symantec programs for Macintosh
    If you have a different version of the product, the procedure may be different. Back up all data before making any changes.

  • Firefox just stopped working! It opens but wont load any sites and gives no error messages. internet working as using safari now.

    Was in the UK yesterday and Firefox was working no problem. Arrived back in Denmark today and FF has stopped working. Mac was closed down for the flight over. Firefox opens and does nothing.. when I click on a bookmark the address bar stays empty and the little search icon continues to rotate. Reset firefox and still get the same problem. I am using the same internet connection I used before going away! Please help!

    Check the connection settings.
    *Firefox > Preferences > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do other browsers and services that can contact internet like e-mail work?

  • Can you stream from Amazon Prime using ATV?

    I want to stream video from Amazon using my Prime account. Can that be done using most recent Apple TV?

    Not on AppleTV itself.
    If thyere's any kind of iPhone/iPad app for th eservice you might be able to Airplay it to AppleTV, but AppleTV by itself won't access Amazon stuff.

  • Stream video from pc using Apple TV and iTunes?

    Can I set up video streaming from a pc using wii, iTunes and apple tv?

    Correction, can I set up video streaming using wifi, appletv, iTunes and a pc?

  • Do you need internet connection to use pacman? [solved]

    Yes you do. 
    Sorry for the dum question,
    Do I need to have internet connection to use pacman?
    Thanks
    The reason I ask is because I need madwifi for my wireless and Arch does not allow me to install this file using pacman -A ......
    Last edited by viga (2008-10-29 03:30:58)

    Any particular reason for not using the already built package in extra ?
    http://archlinux.org/packages/search/?q=madwifi
    You can get it from any mirrors, for example :
    ftp://ftp.belnet.be/packages/archlinux/ … pkg.tar.gz
    Btw, pacman has a feature which might be useful :
    pacman -Sp madwifi ~
    resolving dependencies... done.
    http://mir1.archlinuxfr.org/archlinux/extra/os/i686/madwifi-utils-0.9.3.1-1.pkg.tar.gz
    http://mir1.archlinuxfr.org/archlinux/extra/os/i686/madwifi-0.9.3.1-1.pkg.tar.gz
    madwifi depends on madwifi-utils, so you'll want to download this package too.

  • Do I need continuous internet connection to use cc

    I frequently do not have an internet connection. Can I still use Photoshop and Lightroom when disconnected?

    See also Creative Cloud Help | Creative Cloud / Common Questions
    Do I need to be online to access my desktop apps?
    No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
    An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
    Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

  • IllegalStateException:output stream is already being used for this request

    How to read binary data in JSP. I know, in servlets it can be done and JSP can handle only character data. When i try to open res.getOutputStream(), it is throwing the following exception:"IllegalStateException:output stream is already being used for this request". Is there any workaround in JSP?

    Can you save the file to a location in your server ? Even if you are creating a dynamic image, all you get is a byte array which can be stored in your server. If you can do so, you can set the content type and display the content as mentioned above.

Maybe you are looking for

  • Opening a file in Windows - Backslash

    Hi all, I am creating a code to save a file in MySQL, by selecting the file using a FileChooser. When the FileInputStream gets the string, I am receiving and error saying the file does not exist. I have tried replacing the backslash with forwardslash

  • Error "  is not a time unit" while updating table that is Copy of CATSDB

    Hi, We have created a new table which is a copy of CATSDB and has some more Fields in it. While inserting records to the table, it is throwing the error saying "  is not a time unit". Can you please provide some info on this ? This is a complete cust

  • List Business Services Endpoints with WLST

    Hi, We're using OSB 11.1.1.3 and 11.1.1.6 in several environments. We just need to use wlst scripting to keep track of all business services and their endpoint uri's automatically. We tried using some old scripts but found out that they don't work on

  • Index file freezes up live view dreamweaver cc 2014 .

    Hi, I have a html5 site that the index file was rendering fine yesterday in live view and today it freezes up dreamweaver cc 2014. The page will not render in live view however when viewed in a browser it views correctly. The rest of the site files w

  • Moving a document view with the hand tool is locked at edge of window

    I know this must be simple but cannot figure it out!     When I try and move a corner of my open document with the hand tool to the center of the document window in CS5  when zoomed out, it stops at the edges and will not move inward any further. It