Streaming just audio, Apple TV or should I get an Airport Express?

I want to put some speakers in the kitchen so I can listen to music when I cook. I thought about getting an Airplay speaker but the more I thought about it the more it seemed like a better solution for someone like me was to get an Airplay-ready device and then pick out my own speakers.
So after doing a bit of research I'm tied between the Airport Express and the Apple TV. The Apple TV has more media functionality that I'd like but I'm not sure if I can get away with just plugging it into a set of speakers and controlling it from my iPad. Is there something about the Apple TV that makes it require a TV be attached, either something in the way you interact with it or a hardware/software requirement?
If not, I think it might be the better direction for me. I don't really need a second router in my apartment (I already have an Extreme) as my place isn't that big. It also means if I want to use the Apple TV for it's more traditional purposes sometime later, I can.

Thanks for the tip. I hadn't heard of people ever running the ATV in an audio-only mode but I did more Googling and it did seem to support that it could be done at certain points but never reliably. As such I think the APE is my best option.
Though, one correction is that the Express does allow for analog-out. From what I can tell it's the same port as on teh back of any Mac. I wonder if it does pass-through on Digital? That would be pretty nice...
Either way, thanks!

Similar Messages

  • Should I buy the Airport Express?

    My Mac mini will slowly go from four bars to two bars on my families Airlink 101. Should I get a Airport Express? Or should I go for the Extreme? And with the Express could I unplug it at night and then plug it in, in the morning without difficulties?

    The AX and AEBS have the same advertised range of your Airlink 101. Therefore it probably would not make a difference.
    I suggest that you change the channel used by the Airlink. Hopefully you can find a channel which works better than the one that you are using.

  • HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

    I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Yes, he would have to have jailbroken your phone to install malware. If you see an app called "Cydia", that would indicate conclusively that it was jailbroken. I would recommend restoring the phone as new using iTunes. It is your best shot at removing a jailbreak.
    You should also change your network password, your email password and your FB password as well as passwords to anything else you've used from the phone. Put a lock code on the phone.
    Your best defense against this sort of thing is to NOT give your phone to people you don't trust.
    This is a user-to-user forum, by the way. Apple employees don't participate here. If you want to talk to someone from Apple, make an appointment at the Genius Bar at your local Apple Store.

  • Can I stream music directly from my Ipod Touch 4g to my airport express?

    Can I stream music directly from my Ipod Touch 4g to my airport express?

    If Airplay is avaialble on your iPod Touch and it should be, and your AE is connected to a stereo system or to some speakers, yes.

  • Apple TV 3rd Gen no longer sees Airport Express 1st gen in Airplay after update

    Apple TV 3rd gen was connected to AirPort Express 1st gen via WiFi, drove a video device via HDMI
    and sent audio to the AirPort using Airplay and selecting the AirPort Express under Speakers.
    I could adjust the volume with the AppleTV remote.
    Apple TV was stored unused for a while.
    After powering on yesterday, I ran the update.
    Now Apple TV is connected to the Airport Express via WiFi
    but Airport Express doesn't show in AirPlay settings.
    I can still use AirPlay from my MacBook running Snow Leopard.
    There are no updates available for the AirPort

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

    How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

    You will need an application like Airfoil for Mac to be able to stream any audio files on your computer to the AirPort Express.
    http://www.rogueamoeba.com/airfoil/mac/

  • Does Apple allow functionality between Logic Pro and Airport Express

    That's it... Does Apple allow functionality between Logic Pro and Airport Express.
    If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

    There is your solution: http://www.rogueamoeba.com/airfoil/

  • HT201335 I have just bought apple TV but i cannot get my TV to find the signal from my Ipad 2. I can access my MAC files and play those through home sharing but no streaming from my ipad. It as though the Apple TV is not receiving the signal. What am i mi

    I have just bought Apple TV 2 and have followed all of the steps as directed. I have set up home sharing so I can watch the files from my MAC on the TV but I cannot get the airplay to stream my Ipad2 to the TV.
    I cannot even get my Apple TV to recognise that my Ipad is even on the same network as it as it gives me no options or recognition that it is trying to send the data.
    What have I missed to make my Ipad2 stream the screen image onto my TV...?
    Frustrated am i with it...!!

    I took a very quick look at the Owner's Manual for that Router.
    Much of this you will already know....but:
    1. Its a combination DSL modem/WiFi Router
    2. It does not have ariel antennas. My experience, the WiFi tends to perform poorly compared to standalone WiFi units and the WiFi range is also limited thus slower the farther away you get (or Apple TV gets)
    3. If you don't have a DSL filter infront of it I recommend using one, even if you don't use phones. DSL comes in the pair as a different frequency and its "probably" best to filter it out anyway.....even though it comes in on a dial tone and a dial tone often exists
    4. Let me know who you ISP is and I will find out what other Routers they offer.
    5. You can buy pretty much any DSL modem / Router online assuming it supports PPOe which most DSL ISPs use
    6. If you have not in fact tried running an Ethernet Cable.....try it.....you can get a 100 footer locally for just a few bucks. It could solve a heart ache

  • Should I get a Airport Extreme Base Station?

    My linksys is giving me problems. But with the compatibility problems I've been reading about with the AEBS, should I get it? I currently have a 2 macbooks, one with tiger, one with leopard, a windows xp pc, and 1 macbook pro running leopard. This christmas I'll be adding another Macbook and an iMac running leopard. Thanks.

    Hello Pozzi. Welcome to the Apple Discussions!
    But with the compatibility problems I've been reading about with the AEBS, should I get it?
    I'm not quite sure which "compatibility problems" you are referring to. None of your Macs or the PC, running WinXP, should have any problems connecting with the 802.11n AirPort Extreme Base Station (AEBSn). For maximum security, using WPA2, just be sure that your PC's version of XP is at least at SP2 or greater and that it has WPA2-compliant wireless capability.

  • Apple TV Inference with Time Capsule and Airport express?

    I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
    The TC and AE are configured to join my existing network....and have happy sat there for a few years.
    I would really welcome any ideas.
    Thanks
    R

    Welcome to the discussions!
    It sounds like you have the basic configuration covered correctly.
    You might want to check some settings on the TC:
    Wireless Mode would be create a wireless network
    "Allow this network to be extended" should be checked
    The AX should be set to "extend a wireless network"
    The "allow wireless clients" box should be checked
    In this configuration, the ethernet port on the AX is active so things should work.
    A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
    If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
    Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
    If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
    Please post back with your results.

  • Audio drops only on one of my two airport express

    I recently added another airport express to my network and the audio drops randomly while the first airport express never does that...
    The one that works well is next to my cpu and the one that does not work well is about 30 feet away. Moved the cpu closer but no luck.
    What to do ???

    If your Airport Express devices are configured to "join" an existing wireless network, what is important is the distance (and type of obstacles) between your Mac and the main base station, as well as the distance (and type of obstacles) between the Airport Express and the main base station - not the distance between the Mac and the Airport Express.
    Another factor influencing the quality of the connection is radiofrequency inteference - yes, even if one Airport Express works just fine.

  • Does Apple list available printers that work with AirPort Express?

    Just bought an AirPort Express hoping that I could print wirelessly with my HP 1350 All-in-One, and it won't work. Found out after the fact that my printer doesn't support USB wireless printing.
    I'm looking for a basic color printer to work with AirPort Express for wireless printing by other family members, and I'll continue to use my HP 1350 with USB for scanning and OCR functions.
    Does Apple provide a list of recommended printers that will work with AirPort Express?
    Kevin
    PowerBook G4 1.5 Ghz   Mac OS X (10.4.8)   1 GB DDR SDRAM

    No Apple doesn't any more.
    I have been maintaining a community created list.
    http://tech.ifelix.net/1013.html
    This is an unofficial list of USB printers which are are compatible with the AirPort Extreme Base Station and Airport Express. Printers in bold have been added to the original list that Apple provided.
    Printers in dark red are in fact the only printers I have personally tested.
    Please also note that due to changes in the firmware of both the Airport Extreme base station and the introduction of the Airport Express some printers which are in this list may no longer in fact be compatible.

  • How to set up a Time Capsule to extend a non-Apple router and play tunes to an Airport Express?

    I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi.  I can connect via ethernet but she would like to play music thru an Airport Express at the stereo system.
    My question is:  would it be better to extend the existing wi-fi network (to the upstairs part of the house) OR set up a new Apple network with the Time Capsule linked to the Airport Express.  This is the way I currently have my own network....in a smaller house.

    I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi
    The Time Capsule is not compatible with a CenturyLink device if you plan to "extend" using wireless only.
    You will need to connect the Time Capsule to the CenturyLink modem/router using an Ethernet cable. Then, configure the Time Capsule to "create a wireless network".
    The AirPort Express could then be used for AirTunes by receiving the signal from the Time Capsule.
    If the AIrPort Express is a newer 802.11n version, then it could also be configured to "extend" the wireless signal of the Time Capsule to provide more wireless coverage, in addition to use for AirTunes.
    If you plan to keep the wireless on for the CenturyLink gateway, make sure that the Time Capsule is separated by at least 6-7 feet to help minimize the chances of wireless interference between two routers.

  • Apple Power Mac G4 speakers - connecting to Airport Express?

    Hi.
    Is it possible to connect the old Apple Power Mac G4 speakers (ie. those displayed at http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300153379805&fromMakeTrack= true&ssPageName=VIP:watchlink:middle:uk) to my Airport Express?
    That is, do the two devices have compatible jack and jack socket?
    Thanks

    Simply converting the mechanical connection isn't enough.
    There used to be a device called an iFire which allowed you to use those speakers with any computer that had FireWire. That device has been discontinued for a very long time. Anyway it wouldn't allow you to connect the speakers to an AX.
    You need powered speakers to use with the AX.

Maybe you are looking for

  • FF 12.0 saves images of each webpage I visit to my cache folders. Is this a feature or malware?

    FF 12.0 is saving images of the top of each webpage I visit into my profile's cache folders. I'm running Mac OS X 10.6.8 Build 10K549, MacBook Intel Core 2 Duo, 2GHz, 1GB RAM, 160GB HD, and Intego VBX6, updated daily. In Terminal, the "file" command

  • ISync 2.4 and Sony Ericsson T610

    I have always stored contacts in my T610 as "Last Name, First Name" and never had a problem syncing with my Mac address book. Now with iSync 2.4, "Last Name," ends up in the First Name field and "First Name" ends up in the Last Name field. This seems

  • Using PC sound card as a signal source

    hi, i am a university student, and really want to know if it is possible to using the sound card on a PC as a signal generation source? i did use labview sound VI to generate a single tone, but the measured signal is not a sine waveform,the negtive p

  • Guest account creation in ISE

    Hello All, I am encountering an issue in which I find only when guest accounts are created by sponsor through the sponsor portal, guess access is granted. If I manually add guest account in the same guest role via the administrative UI, instead of gu

  • JCA Mail Adapter

    Hi, I have written a JCA adapter to sit in betweena mail server and an aplication. I have deployed the adapter succesfully with warnings though. The connection factory is having trouble being initialized. Here is the error log. 2007-03-26 20:25:57.12