Streaming .ogg file on ios device not working.

Hello!
I build up a very simple .ogg streaming app for ios and everything goes well in Flash Builder simulator. However when deployed to device the streaming part does not work at all!
This is in ios only, the very same app deployed on BB Playbook works fine after I allow access to internet. But I cannot setup any permissions on ios. I am using AIR 2.7.
Any kind of feedback is greatly apreciated!
Thank you,
Ovidiu G,

Try posting in the iTunes Match forum - you'll get better responses there.
https://discussions.apple.com/community/itunes/itunes_match

Similar Messages

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make.

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

HT201343 Is there a way to stream video from one iOS device to another?

My family and I are going on an extended vacation and we want to make sure the kids have enough videos to keep them busy on very long flights. I'm taking my MacBook Pro and was wondering if there's a way to stream video our different iOS devices without preloading movies on every device.

If the MBP was connected to inflight WiFi like Gogo it might be possible. Then you use the MBP as a hotspot using internet sharing. The iOS devices connect to the MBP. I'm not sure if Its allowed in flight but give it a try.

File type associations is not working in the App-V 4.6 SP3

Hello,
I found issue, that file type associations is not working in App-V 4.6 SP3. When I try to open associated file with double click I receive next window:
Translate: This action is only valid for products that are currently installed.
I have checked associations in App-V Console and in OSD file, everything looks like OK.
Maybe someone has some ideas?
Could you please share them with me?
Thank you in advance.

Is this only happening on one client machine? If so can you completely clear the application and re-stream\cache it again?
If that fails, you could try to create the FTA locally on the client
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Streaming m3u files using iTunes and not QuickTime plug-in

Hi,
I am listening to mp3 files using a webserver and streaming m3u files. When I click on the url I get the QuickTime plug-in. I don’t like the QuickTime plug-in very much so I would like to have iTunes starting instead of QuickTime.
I have chosen to use iTunes for m3u files but it do not work. If I save the m3u file to my disc and double click iTunes is starting as I want but not when clicking on the link in Safari.
Is there any solution to get iTunes starting when clicking on a link instead of QuickTime plug-in?
The link looks like this: http://www.samplelink.info/custom.m3u?ltype=SEARCHRESULTS
Thanks in advance.
Jarle

Hi
I'm generally ignorant in the way of those computer thingies, but seeing as no one else has responded, I'll venture my poorly informed opinion.
It seems to me that what you're asking for can't be done (as yet). What you would need is an "iTunes plug-in" effectively, which I don't think exists.
The only way you could set iTunes as the default for playing m3u is to leave the web/browser context (i.e. by downloading the m3u file) and then opening it with iTunes, which you already know how to do.

TS1538 iOS: Device not recognized in iTunes for Windows doesn't fix my issue

I followed the instructions in this link but it has not fixed my problem. After I have done the screenshots and go into the device manager, my iphone is still not recognized in any of the devices. Any suggestions?

Hey there andrijfrommississauga,
I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

Apple mobile device not working

I've just re-installed to the latest Itunes, but whenever I connect my iphone 4 in it won't read on itunes. I've tried this support page http://support.apple.com/kb/TS1567 but whenever I try to start the "Apple Mobile Device" it says 'Windows could not start Apple Mobile Device on Local Computer Error 1067: the process terminated unexpectedly.
Can someone help me fix this problem please.

Hello jonnysz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Completely uninstall AMDS, iTunes, and all Apple software.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Best of luck,
Mario

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

Are you using the Adjust Date and Time option or the Batch Change option? If it's the former try the latter. If you get the same results launch iPhoto with the Option key held down and create a new, test library. Import the same video file and check to see if the same problem persists.
OT

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

wait until, Apple fixes it

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Streaming .ogg file on ios device not working.

Similar Messages

Maybe you are looking for