Streaming PDFs really slow

If I stream a movie from my NAS to my Macbook it is absolutely fine, however if I try to read a PDF from my NAS it is really slow, or just fails/locks up.
If I stream the same PDF to my Ipad Air it works a lot better, if my iPad doesn't crash.
I cant understand why this should be - surely a video would have a higher data transfer requirement.
Any ideas please?
(apologies I did not know where this post should be located

Welcome to the Apple community.
You need to get your network working better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

TS2972 Music played through Apple TV the streaming is really slow & jumpy

I have just installed a new Apple TV & have my music library loaded in iTunes library on a new MacBook Pro. However, when I try to play music track through Apple TV the streaming is frustratingly slow and track often jams after a few seconds and/or become really jumpy etc. The wireless connection appears to be strong enough - showing full bars in the wireless icon on laptop. But the apple TV signal only shows 2/3 bars out of 5.
Does anyone have any ideas on how to fix? Do I need to compress the music files (from downloaded CD's) into a smaller file size or different format? I notice that music that I've downloaded from iTunes store seem to stream & play without any problem.
Meanwhile the photo library loading is also painfully slow through Apple TV - assume this is due the same problem?

Welcome to the Apple community.
You need to get your network working better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

HT201317 Photo Stream really slow from Iphone???

Photo Stream moving really slow from Iphone. Took 12 hours for one photo to move from cameral roll to photo stream and then several hours for it to move to computer.

You can't automatically "push" the photo stream photos from your iPad photo stream folder back to your photo stream. You have to get copies of these photos to your iPad's camera roll as new photos for them to be uploaded to your photo stream. There are a couple of ways to do this:
Open the photos one at a time on your iPad and take a screenshot. This will add a new low resolution copy of the photo to the camera roll, which will then upload to your photo stream.
Email the photos a few at a time to yourself, then save the attached photos to your camera roll. This will add a copy of the photo at full resolution to your camera roll and upload to photo stream.
Use an app like PhotoSync, which will allow you to wirelessly transfer full resolution copies of all your old photos to your computer all at once. Once on your computer you then have to delete these photos from your camera roll and use PhotoSync to transfer them back from your computer to your camera roll again. These will be the original resolution and will upload to your photo stream. (You need an app like this because iTunes will not transfer photos back to your camera roll, where they must be in order to add to your photo stream.)

Brand new MacBook Pro has really slow download and streaming speeds

I'm new to Macs, and don't know much about computers in general. But I got a 13" MacBook Pro almost two weeks ago and have been experiencing really slow download and video streaming speeds. Pages load one image at a time, Netflix is almost impossible to use because the videos will stop buffering every five minutes even if I let them buffer for more than ten minutes. I haven't been experiencing any issues with wifi on my phone, and I've troubleshot our router. I'm not sure what it could be--but then again, I don't know a whole lot. Before I go running off to the Apple Store or call support, is there anything I can try in the meantime? Thanks!
Here are the system specs:
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel Iris
Software OS X 10.9.3 (13D65)
74.23 GB free out of 120.47 GB

Check with your isp regarding your download & upload speeds as well as streaming. You need to determine if the issue is on their end. You can also check on the speedtest.com website. Compare what your isp tells you to the net speed website.

My Macbook Pro is running really slow and programs keep crashing

I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully this will help some of you guide me in the right direction?
Most of my memory (over 200GB) is used up by "OTHER", any idea what that could be and how I could easily free up space?
Thanks a lot
EtreCheck version: 2.1.8 (121)
Report generated 17 April 2015 08:02:01 BST
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 155
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:16:25
Disk Information: ℹ️
    Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (64.39 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    JMicron Samsung S2 Portable 1 TB
        EFI (disk2s1) <not mounted> : 210 MB
        TIME MACHINE (disk2s2) /Volumes/TIME MACHINE : 999.86 GB (70.54 GB free)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
        /Library/Extensions/tap.kext
    [not loaded]    foo.tap (1.0) [Click for support]
        /Library/Extensions/tun.kext
    [not loaded]    foo.tun (1.0) [Click for support]
        /System/Library/Extensions
    [loaded]    com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
Startup Items: ℹ️
    tap: Path: /System/Library/StartupItems/tap
    tun: Path: /System/Library/StartupItems/tun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.logmein.hamachimb.plist [Click for support]
    [running]    com.logmein.logmeingui.plist [Click for support]
    [running]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    [failed]    com.rim.BBLaunchAgent.plist [Click for support] [Click for details]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.hamachix.tuncfgd.plist [Click for support]
    [running]    com.logmein.hamachi.plist [Click for support]
    [running]    com.logmein.logmeinserver.plist [Click for support]
    [loaded]    com.logmein.raupdate.plist [Click for support]
    [failed]    com.rim.BBDaemon.plist [Click for support] [Click for details]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
    Skype    Application (/Applications/Skype.app)
    Microsoft Database Daemon    Application (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
    Spotify    Application Hidden (/Applications/Spotify.app)
    BlackBerry Device Manager    UNKNOWN Hidden (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.935 - SDK 10.7 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    LogMeInSafari32: Version: 1.0.935 - SDK 10.7 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
    1Password
    Evernote Web Clipper
    WebRank SEO
Audio Plug-ins: ℹ️
    EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
    CallRecorder: Version: v2.5.14 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Trusteer Endpoint Protection [Click for support]
    VLC Streamer [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 254.45 GB
    Destinations:
        SAMSUNG [Local]
        Total size: 999.86 GB
        Total number of backups: 36
        Oldest backup: 2012-04-09 11:47:32 +0000
        Last backup: 2015-02-05 20:06:09 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        11%    WindowServer
         4%    Safari
         1%    Skype
         0%    Dropbox
         0%    rapportd
Top Processes by Memory: ℹ️
    241 MB    Skype
    206 MB    Safari
    172 MB    Spotify
    129 MB    mds_stores
    120 MB    Finder
Virtual Memory Information: ℹ️
    2.49 GB    Free RAM
    4.03 GB    Active RAM
    844 MB    Inactive RAM
    1.23 GB    Wired RAM
    2.80 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 17, 2015, 07:54:25 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-04-17-075425_[reda cted].crash
    Apr 17, 2015, 07:42:57 AM    Self test - passed
    Apr 16, 2015, 10:33:24 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/PDFpen_2015-04-16-103324_[reda cted].crash
    Apr 16, 2015, 08:07:28 AM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-16-080728_[redact ed].cpu_resource.diag [Click for details]
    Apr 14, 2015, 07:13:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-14-191357_[redacted].crash

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Macbook Pro 13' (Late 2011) STILL really slow since updating to Mavericks

So I've seen a lot of discussions about the same issue and some have threads have been solved, yet others remain unknown. I have the same problem as others that stated they have experience something similar to my case. Just fyi though, that my computer was already really slow prior to upgrading to Mavericks (on Mountain Lion). That was when I decided to do a clean install of Mountain Lion and everything was snappier than ever. It wasn't long until Mavericks came out and I instantly did an upgrade but everything suddenly started slowing down again and it's getting worse. I hope someone can help me out here, thank you.
EtreCheck version: 1.9.12 (48)
Report generated July 27, 2014 at 12:39:20 AM EDT
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 12:18:52
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Kenichi Kasamatsu (disk0s2) / [Startup]: 499.25 GB (154 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 70
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.nero.HSMMonitor.plist Support
User Login Items:
iTunesHelper
Dropbox
UnlockID
Google Chrome
Android File Transfer Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      16% WindowServer
      15% Google Chrome
      3% hidd
      1% fontd
      0% Dropbox
Top Processes by Memory:
160 MB Google Chrome
135 MB softwareupdated
98 MB Finder
74 MB mds_stores
74 MB WindowServer
Virtual Memory Information:
321 MB Free RAM
1.52 GB Active RAM
1.20 GB Inactive RAM
977 MB Wired RAM
2.54 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Images load really slow after using Reduce File Size...

After using the "Reduce File Size..." feature in Acrobat 9 on Windows Vista, some of the images load really slow as I page through the document. Is there some kind of compression setting that I should look for to prevent the images from be affected by this?
For some of my documents it will take 30 to 60 seconds to load an image. Sometimes I can't do anything with the document until the graphic loads entirely.

Can you post an example of a file that has this issue? Personally, I recommend using the PDF optimizer, it gives better control of the final pdf file.

Performance issues in iOS- Animations run really slow. (CS5.5/AS3)

I have created an app in CS5.5 for Android and iOS. I have tested on two Android devices and everyingthing works fine. However, on an iPad and iPhone the animations are really slow. Here are some more facts:
1) My project has many scenes and in the problems scene there are upwards of 1,200 frames. But even simple animations run slowly.
2) The frame rate is set for 24 fps.
3) I have created a universal app (iphone and ipad), publish resolution is standard at full screen.
4) Ironically, I have already tried caching as bitmap. That actually slowed my animations even more.
I am truely at the end of the line here and don't have any possible solutions.
I could use some help here. Any possible solutions would help.

here are some links to help you optimize your content for iOS:
http://help.adobe.com/en_US/as3/mobile/flashplatform_optimizing_content.pdf
http://download.macromedia.com/pub/labs/packagerforiphone/packagerforiphone_devguide.pdf
http://floatlearning.com/2010/10/key-differences-in-air-for-android-and-ios/

PB Displacement filter really slow with big images

hello;
     I am trying to make a Pixel bender displacement filter that will handle displacements bigger than 128 pixels, for flash. Right now flash only uses one 8 bit color channel to represent a displacement, which can not be bigger than 128 pixels. I am trying to make a pixel bender kernel that will take 3 color channels( 24 bit) as a displacement, which should be able to handle displacements as big as 8388608. That is obviously bigger than I need.
     The problem i am finding is that when the image or the displacement maps are too big it runs really slow. With images the size 3072x768, it runs at 3 frames per second on an intel based mac.
     The question is , does anybody know how to optimise this code?
the code:
<languageVersion : 1.0;>
kernel DisplacementMap
<
namespace : "dood";
vendor : "m0ose";
version : 1;
description : "Displacement by bitmap map 16 bit. X and Y are seperate bitmaps ";
>
parameter   float       scale
    <
        minValue        : -10.0;
        maxValue        : 10.0;
        defaultValue    : 1.0;
    >;
parameter float offsetX
    <
        minValue        : -1000.0;
        maxValue        : 1000.0;
        defaultValue    : 0.0;
    >;
parameter float offsetY
    <
            minValue        : -1000.0;
        maxValue        : 1000.0;
        defaultValue    : 0.0;
    >;
parameter float zoom
    <
            minValue        : 0.1;
        maxValue        : 10.0;
        defaultValue    : 1.0;
    >;
input image4 src;
input image4 mapX;
input image4 mapY;
output pixel4 dst;
void evaluatePixel()
    float2 pos = outCoord();
    float4 amountX = sampleLinear(mapX , pos);
    float4 amountY = sampleLinear(mapY , pos);
    float x = (amountX.b * 256.0 - 128.0) ; //red
    x = x + (amountX.g * 256.0 - 128.0) * 128.0;//alpha
    x = x * scale;
    x = x + pos.x;
    x = x + offsetX ;
    x = x / zoom;
    float y = (amountY.b * 256.0 - 128.0) ;
    y = y + (amountY.g * 256.0 - 128.0) * 128.0;
    y = y * scale;
    y = y + pos.y;
    y = y + offsetY ;
    y = y / zoom;
    float2 displacedPos = float2( x , y );
    dst = sampleLinear(src, displacedPos);
thanx

I am adding a shader to the filter attribute of a Flex Video Player
code: something like this
[Embed(source="displ24test.pbj" , mimeType="application/octet-stream")]
protected var displacer:Class;
var shader:Shader;
public function init():void
shader = new Shader( new displacer() );
shader.data.src.input = src;
shader.data.mapX.input = mapX;
shader.data.mapY.input = mapY;
shader.data.scale.value = [ scale ];
shader.data.offsetX.value = [ offsetX ];
shader.data.offsetY.value = [ offsetY ];
shader.data.zoom.value = [ zoom];
_mov.filters = [ new ShaderFilter( shader) ];
then in flex:
<s:VideoPlayer x="10" y="10" source="df_retro5_1k_sound.mov" id="_mov" autoPlay="true"/>

Cad converted to PDF, very slow rendering upon opening Document.

The Rendering when opening the document is very slow.
It takes about 45 seconds to open, then it freezes for another 10 seconds before one can view it.
iv'e read alot and tried different suggestions, but no solution so far.
Testet on Adobe Reader 10.1 and 9.2, and Acrobat 9.1. All the same.
The Document it self has been coverted form Cad to PDF, and has a very large resolution, it is 1.8MB, upon opening Reader uses about half a gig ram.
I've read that on opening, it has to rescale the image to fit ones resolution, and this is what takes time?
Simply wondering if anyone has any solution or explanation to why.
Thanks.
-Berg

Drive A is 60 GB with 3.66GB free.
Running OSX from that drive should really slow it to a Crawl, and is getting to the dangerous point... you need at least 12GB fre, 30 GB would be better.
Nt certain why the other is so slow... did you open Activity Monitor & observe CPU, Memory & such while it is slow?
If you can free some space on the Internal, Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.

My MBP is running really slow-included EtreCheck

Please Help Me, I can do anything, even erasing everything. Just tell me what to do to get it back(It is really slow)
Problem description:
My MBP is running very slow
EtreCheck version: 2.1.8 (121)
Report generated February 7, 2015 at 1:32:37 PM GMT+2
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce GT 330M - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10 (14A389) - Time since boot: 0:17:2
Disk Information: ℹ️
    ST9320325ASG disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 319.21 GB (30.27 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Configuration files: ℹ️
    /etc/hosts - Count: 2
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Incompatible Software/Parallels Service.app
    [not loaded]    com.parallels.kext.prl_hid_hook (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_hypervisor (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_netbridge (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_usb_connect (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_vnic (5.0 9308.543312) [Click for support]
        /System/Library/Extensions
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
    [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) [Click for support]
    [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
        /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
    [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
        /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) [Click for support]
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    MobileBrServ: Path: /Library/StartupItems/MobileBrServ
    ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.helperTool.plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    [loaded]    com.nero.HSMMonitor.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Day One Agent    UNKNOWN Hidden (missing value)
    SIMBL Agent    Application Hidden (/Library/ScriptingAdditions/SIMBL.osax/Contents/Resources/SIMBL Agent.app)
    SpeechSynthesisServer    Application Hidden (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Google Drive    Application Hidden (/Applications/Google Drive.app)
    Android File Transfer Agent    Application Hidden (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    Dropbox    Application Hidden (/Applications/Dropbox.app)
    RealPlayer Downloader Agent    Application Hidden (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
Internet Plug-ins: ℹ️
    NPDjVu: Version: Unknown [Click for support]
    DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.4.1.4 [Click for support]
    PrintDialogExt: Version: 6.1 [Click for support]
    RealPlayer Plugin: Version: Unknown [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Click for support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.0.2 [Click for support]
    Silverlight: Version: 4.0.60831.0 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: Unknown
    WangwangPlugin: Version: 1.3 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    Searchme [Adware! - Remove]
    Slick Savings [Adware! - Remove]
    Amazon Shopping Assistant [Adware! - Remove]
    Ebay Shopping Assistant [Adware! - Remove]
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    SpeedLimit [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        11%    WindowServer
         1%    RealPlayer Downloader Agent
         0%    AppleSpell
         0%    RPDLAgentHelperJ
         0%    launchservicesd
Top Processes by Memory: ℹ️
    210 MB    com.apple.dock.extra
    206 MB    softwareupdated
    172 MB    Google Chrome
    150 MB    spindump
    86 MB    Finder
Virtual Memory Information: ℹ️
    417 MB    Free RAM
    1.85 GB    Active RAM
    1.33 GB    Inactive RAM
    698 MB    Wired RAM
    2.25 GB    Page-ins
    14 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 7, 2015, 01:08:39 PM    Self test - passed
    Feb 6, 2015, 02:55:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/adb_aos_2015-02-06-145503_[red acted].crash
    Feb 6, 2015, 02:52:01 PM    /Library/Logs/DiagnosticReports/HSMMonitor_2015-02-06-145201_[redacted].cpu_res ource.diag [Click for details]

I did the Etrecheck again
EtreCheck version: 2.1.8 (121)
Report generated February 7, 2015 at 2:20:23 PM GMT+2
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce GT 330M - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10 (14A389) - Time since boot: 1:5:42
Disk Information: ℹ️
    ST9320325ASG disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 319.21 GB (29.91 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Configuration files: ℹ️
    /etc/hosts - Count: 2
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Incompatible Software/Parallels Service.app
    [not loaded]    com.parallels.kext.prl_hid_hook (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_hypervisor (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_netbridge (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_usb_connect (5.0 9308.543312) [Click for support]
    [not loaded]    com.parallels.kext.prl_vnic (5.0 9308.543312) [Click for support]
        /System/Library/Extensions
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
    [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) [Click for support]
    [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
        /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
    [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
        /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) [Click for support]
    [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    MobileBrServ: Path: /Library/StartupItems/MobileBrServ
    ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [running]    com.google.keystone.agent.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.helperTool.plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist [Click for support]
    [not loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    [loaded]    com.nero.HSMMonitor.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Day One Agent    UNKNOWN Hidden (missing value)
    SIMBL Agent    Application Hidden (/Library/ScriptingAdditions/SIMBL.osax/Contents/Resources/SIMBL Agent.app)
    SpeechSynthesisServer    Application Hidden (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Google Drive    Application Hidden (/Applications/Google Drive.app)
    Android File Transfer Agent    Application Hidden (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    Dropbox    Application Hidden (/Applications/Dropbox.app)
    RealPlayer Downloader Agent    Application Hidden (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
Internet Plug-ins: ℹ️
    NPDjVu: Version: Unknown [Click for support]
    DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.4.1.4 [Click for support]
    PrintDialogExt: Version: 6.1 [Click for support]
    RealPlayer Plugin: Version: Unknown [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Click for support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.0.2 [Click for support]
    Silverlight: Version: 4.0.60831.0 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: Unknown
    WangwangPlugin: Version: 1.3 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    SpeedLimit [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        10%    WindowServer
         5%    ksfetch
         4%    launchservicesd
         2%    GoogleSoftwareUpdateAgent
         2%    RealPlayer Downloader Agent
Top Processes by Memory: ℹ️
    202 MB    com.apple.dock.extra
    180 MB    Google Chrome
    142 MB    softwareupdated
    129 MB    Finder
    99 MB    Google Chrome Helper
Virtual Memory Information: ℹ️
    57 MB    Free RAM
    1.76 GB    Active RAM
    1.71 GB    Inactive RAM
    709 MB    Wired RAM
    3.78 GB    Page-ins
    169 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 7, 2015, 01:08:39 PM    Self test - passed
    Feb 6, 2015, 02:55:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/adb_aos_2015-02-06-145503_[red acted].crash
    Feb 6, 2015, 02:52:01 PM    /Library/Logs/DiagnosticReports/HSMMonitor_2015-02-06-145201_[redacted].cpu_res ource.diag [Click for details]

Help, really slow BB speed

Hi
I have been with BT since beginning of August, previously with TalkTalk for about 4 years prior. I always had really good speed with TT, always near the max for my line (which can provide upto 20mbps).
Now with BT everything was fine for August/Sept, now we are in October my connection is really slow, feels like the dark ages with dial-up......
I am using a BT hub 3, nothing else has changed in my PC set-up. This is really frustrating, especically as playing on-line games like LOTRO is virually impossible due to lag etc....
I have tried searching this forum, and have checked my ADSL settings and BT speedchecker, results below.....
Any ideas guys?
Thanks....
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
5507 Kbps
0 Kbps
21000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 5507 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :19715 Kbps(DOWN-STREAM), 1189 Kbps(UP-STREAM)
IP Profile for your line is - 17393 Kbps
2. Upstream Test: -provides background information.
Upload Speed
827 Kbps
0 Kbps
1189 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 827 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1189 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 02:11:27
Downstream:
19.25 Mbps
Upstream:
1.162 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
4.5 dB / 5.8 dB
Line attenuation (Down/Up):
9.9 dB / 5.0 dB
Output power (Down/Up):
19.5 dBm / 12.3 dBm
FEC Events (Down/Up):
6397165 / 21
CRC Events (Down/Up):
4315 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
75055 / 0
Error Seconds (Local/Remote):
228 / 0
I'm a bit worried about the error seconds and various events, don't really understand them though....Sorry, not a techy....
Any ideas??
Edit: I wanted to add that I only live about 2 mins walk from the main BT exchange for my town.....

Tested again at 7pm
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
11952 Kbps
0 Kbps
21000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 11952 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :18305 Kbps(DOWN-STREAM), 1160 Kbps(UP-STREAM)
IP Profile for your line is - 16150 Kbps
2. Upstream Test: -provides background information.
Upload Speed
903 Kbps
0 Kbps
1160 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 903 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1160 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
?Maybe just congestion? I'll check the hub settings later.
Please visit FAQ section if you are unable To understand the test results.

AppStore really slow on cellular data

I'm currently using threeUK network for my ipad 4th gen latest firmware. I have realised the speed is really slow. Browsing speed is alright, YouTube streaming is alright .etc. but when it comes to AppStore it is ultra slow. After finally loading the AppStore and clicking on install. The download of apps is ultra slow as well. I have been researching and it seems to be similar to people having AppStore slow for most people on wifi. But for me wifi speed is good even before disabling the app genius from location services.

Sorry I didn't realise that But now think its carrier problem not Apple. Sorry Apple
I talked with my carrier and they changed few settings on their end but it didn't help. But after 5 min I had a really really fast speed, but after a minute it was slow again

My internet is really slow when others are using i...

Hey my internet is really slow when other people use it.
Also it is a problem when i'm xbox live, i'll be playing a game and when someone else in the house is on BBC i player, it skips like mad and its so frustrating to play on, in fact its unplayable.
I just want to know if there is a way to fix this,
I have BT broadband and i have the black hub.
I have no ideas about computers and internet so i really dont know what to do about this!
any help would be much appreciated, thank you xx

thank you,
here are my results from the hub;
ADSL line status
Connection Information
Line state Connected
Connection time 7 days, 00:33:53
Downstream 1,824 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 14.8 dB / 14.0 dB
Line attenuation (Down/Up) 55.7 dB / 31.5 dB
Output power (Down/Up) 2.8 dBm / 1.3 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 1627 / 261
CRC Errors (Down/Up) 385 / 189
HEC Errors (Down/Up) 1544 / 147
Error Seconds (Local/Remote) 279 / 95
and here are my results from the speed test
1. Best Effort Test: -provides background information.
Download Speed
1143 Kbps
0 Kbps 2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1143 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1824 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 12.94:24.68:62.38 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
364 Kbps
0 Kbps 448 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 364 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

[REQ] fast performance of an exported pdf on slow pc

I often insert a lot of images in my indesign documents on a single page. I need to make them of the same height and then resize the image accordingly.
For example to align all the images horizontally in a neat way, I change the height manually [for e.g. 60mm] in its dimensions box. Is there a way to do it quickly? Eg. I select all the images and put their height 60mm and their height becomes as specified and they get resized accordingly?
Same is the requirement of images for width.
I made an A1 size sheet for my architecture presentation. It only had rectangles, text boxes and images. I have an i5 processor in my laptop with ati sunpro graphics card of 2gb capacity. I exported the file as pdf and it opened fine on my machine.
Unfortunately, the printers shops have core 2 duo pcs with low ram,and the file didn't open on their pcs. I then exported my file as jpg with 300dpi cmyk [as here in India, printers are all cmyk]. The image still got very heavy and got printed really slow on hp 500 42 printers.
how can I make the file perform faster on slow pcs so that I don't have to face this problem?

For the first part of your question, there is a feature in InDesign called "gridify" (I'm not sure which version introduced it, but give it a try and you will see if you have it). If you place several images onto a page at once, you can depress your mouse button and hit the up/down/left/right arrows before you lift up your mouse button. Each tap of an arrow key will add a column or row to a grid (gridify), and all of the images will fit either horizontally or vertically into the image frames that are created in this grid. If you want them all to be the same height, drag out the grid frames wider than they need to be. After the frames are in place, but while they are still selected, you can fit the frame size to fit the content by using Object>Fitting>Fit Fit Frame to Content (or Option Command C). If you need the images to be the same width, drag the image frames taller than they need to be.
You could also create an image frame before you place the images and go to Object>Fitting>Frame Fitting Options>Fit Content Proportionally and set the frame to scale the image to fit when placed. Once you have your frame, you can go to Edit>Step and Repeat and set the number of rows, columns, and the space between (check the Preview button to see how it will look before you hit OK). With your image frames in place, place a group of images at once by clicking into each frame.
That's two options, but there are probably others to consider.

Streaming PDFs really slow

Similar Messages

Maybe you are looking for