Streaming problem over DLNA

Hello.
The problem I have is that when I access a video file it will start then go into a loop, it buffers for a bit then starts, buffers again then starts. It only plays for a couple of seconds.
Any ideas as to the cause of this problem & any possible cures?
Thanks in advance for any help.

I had a similar problem and was told to have my SIM card replaced. I did, and it worked OK for a day, now I'm searching for other solutions, or perhaps I got another faulty SIM card/connection.

Similar Messages

Dlna streaming problem with iPad mini!

I have several Apple products witch all connected to my HP Data Vauld X310 Server to stream Videos to my devices! Works perfect with my iPhone 4s, iPad4, iPad2, iPod touch! Know i have an iPad mini Wifi and the Server say no to it. Whats wrong? I try every settings on the Server but it does not help! Allways all the other Devices work but the iPad mini not! I use 8Player App on the Devices on the Server runs Windows Home Server! The Mini geht a Connection to a Windows 8 PC and stream Videos over DLNA, so the technic of the mini seems ok! Thanks for help! Greatings from Berlin!

I forgot the servererrornote the 8Player App shows:
<?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstr ing>UPnPError</faultstring><detail><u:UPnPError xmlns:u="urn:schemas-upnp-org:control-1-0"><u:errorCode>801</u:errorCode><u:err orDescription>Zugriff verweigert</u:errorDescription></u:UPnPError></detail></SOAP-ENV:Fault></SOAP-E NV:Body></SOAP-ENV:Envelope>
Thanks for help!

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

Facing Problems in Streaming Video over internet using FMS 3.5

I,am using FMS 3.5 to stream video over internet.This video will be a part of a website www.mywebsite.com . I have the webserver in my company. This webserver has the local LAN IP : 192.168.10.19 which is binded with a public internet ip 212.77.xx.xx .This website is hosted using IIS 6.0 on OS windows 2003 server with SP2
I created a swf name sample.swf from sample.flv file and gave it the rtmp address as follows:
rtmp://192.168.10.19/vod/_StreamingVideo_/sample.flv (where _StreamingVideo_ is the instance on the server, and 192.168.10.19 is the LAN IP of server) ,and it worked fine and every one within the local company network could see the streaming video. Now i tried to replace this local address with the public address and the address became as follows:
rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv
After giving this public IP in the rtmp address i,am getting a message "Failed to load Flv from the address rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv" and as as result the video is not streamed and it only shows the progress bar on the link
www.mywebsite.com/VideoStreaming/Sample.html without loading the video. I have also checked the ports 80,1935,1111 on the server and they are open. Is there any problem with my rtmp address with public IP or any other reason ??. Please help me out in this regard because im realy stuck here.

Adding to my previous post this is the XML output i get when i try to access the fms admin console from local ip address i.e http://192.168.10.19:1111/fms_adminConsole.htm
<?xml version="1.0" encoding="utf-8" ?>
- <result>
<level>error</level>
<code>NetConnection.Connect.Rejected</code>
<description>Admin user requires valid username and password.</description>
<timestamp>2/3/2010 8:26:08 AM</timestamp>
</result>
but when i try to access fms admin console through public ip (http://212.77.xx.xx:1111/fms_adminConsole.htm) then it gives me the following :
Internet Explorer cannot display the webpage.
Any more suggestions Jay (because really ur the only one helping me out in this so far) ??

STRDN1050 - how to play DSD over DLNA?

the documentation of the STR DN1050 states that DSD can be played over DLNA.I can't figure out how to make this work.The same DSD64 files play fine from a USB storage plugged to the receiver directly. What software on my computer do I need to make the DSD encoded properly so the receiver accepts to play something?I have tried Minimserver, Plex and JRiver without success.I use Mac OS X. Thanks for any insight

Hello mimizone, thank you for your message.
Supported format ( STRDN1050)
DSD: 2.8 MHz, 1 bit DSD
By setting up your computer as a Digital Living Network Alliance® (DLNA) server, you can stream media, such as music, photos or video, over your network to a DLNA-supported device. DLNA devices include certain TVs, Blu-ray Disc™ (BD) players, HiFi component systems and computers. Once the DLNA server and device are set up and connected properly, the device can access media from the iTunes® application and iPhoto® libraries, as well as other locations on the computer. Follow the procedure below to set up the Serviio software:
IMPORTANT:
The Serviio software is available on the serviio website.
The computer and the DLNA device must be connected to the same network for this procedure to work.
If you are using third-party firewall or security software, you may have to configure it to allow network access for the serviio software.
Click the System Preferences icon in the dock.
In the System Preferences window, under Other, click Serviio.
In the Devices: section, verify your DLNA device is showing, enabled and has an IP address.
NOTE: If your DLNA device is not showing or does not list an IP address, verify it is set up and connected properly per the manufacturer's instructions.
For more information about the servio software, consult the operating instructions or visit the Serviio support website.
If this post helps you to resolve your concern, please let us know by accepting this post as a solution.

Use Google's Public DNS Server To Fix Apple TV Streaming Problems

Many people have been having a streaming problem with the Apple TV - especially with Netflix. In fact, it's often the most popular topic on this forum. After having the same problem off and on for two years, I finally figured out the following solution. It uses Google's public DNS service instead of your ISPs DNS.
1. Navigate to Settings >> General >> Network and select Configure TCP/IP.
2. Select “Manually” next to Configure IP.
3. Dont change the IP address or the Subnet Mask and Router Address. Just click "Done".
4. Set the DNS Address screen with the following: 008.008.008.008 and click “Done.”
You should now be able to stream more smoothly on your Apple TV.
This problem is probably caused by a bad streaming server somewhere on Netflix's CDN (Content Delivery Network). The DNS points your Apple TV based on location. By using Google's DNS, you get a different streaming server. That is, of course, a wild guess and is not verifiable by me. But, it makes sense so I'm going with that.
If this works for you, please buy a cup of coffee for a complete stranger or some other selfless, random act of kindness.

Welcome to the  tv Discussion Forums.
Barring interference to the network (which is probably unlikely but not totally out of the question) I'd agree that your problem seems specific to one mac. IMHO reinstalling an OS is more often than not a lazy mans way of saying they can't be bothered to look for the problem and totally unnecessary so far as I am concerned. I don't believe any version of itunes has been a problem for the tv, although there have been the usual problems posted that usually accompany any upgrade (these are more than likely due to updating over damaged files).
Reinstalling itunes will replace the application but not many of the associated preference files that are more likely to be a problem than the application itself. Rather than reinstalling itunes, I'd try creating a new user and try itunes in the new user account to see if the problem persists.
You could also create a new library in the original user account and see if you have similar problems with that library.
Check your network settings and compare them to the other macs that work OK, check for proxy servers and DNS addresses.

Streaming video over http

Hello
I need your help to understand how streaming over http works
In our company we have about 600 users who will be able to view streaming video over http hosted in Internet
We have 100 Mbps Internet link . What can we expect to happen in the network when there is contention for resources to access video on our network which delivers best effort service for video
We have enough bandwidth 4 gigs in local area network to core , so there's no real bandwidth cruch
How to differentiate or monitor bandwidth used for http streaming as against http normal traffic
Sent from Cisco Technical Support iPad App

One step closer:
Changed the crossdomain.xml file (more permissive settings).
Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
But at least now I can get the individual streams in the set manifest file to work:
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
"The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
I used the f4m config tool to make the file. These are the file's contents:
<manifest xmlns="http://ns.adobe.com/f4m/2.0">
<baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
<media href="livestream1.f4m " bitrate="200"/>
<media href="livestream2.f4m " bitrate="500"/>
<media href="livestream3.f4m " bitrate="1000"/>
</manifest>
Thanks

IPad air has trouble streaming videos over Wi-Fi when Bluetooth is enabled

With Bluetooth enabled several video streaming apps have trouble. Videos are intermittent and choppy. But when I turn Bluetooth off, the problem goes away immediately. I'm streaming videos over Wi-Fi, and I tried changing the channels of the Wi-Fi network, but nothing seems to help. I've also tried switching video streaming apps with no difference. Has anyone else noticed these problems with Bluetooth?

Hey,
I have the same problem!
Apple, do you have an answer for this? How can we fix this?

HT5295 Is there a way to disable autoplay or limit it to downloaded podcast? Otherwise, one ends up streaming podcasts over 3G unnecessarily...

Is there a way to disable autoplay or limit it to downloaded podcast? Otherwise, one ends up streaming podcasts over 3G unnecessarily...

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Error message when I try to stream iTunes over Airport Express

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

ICloud photo stream problem

Hi all - I really need your help.
My iPhoto '11 was working just fine until I upgraded it to 9.4.3. I also just installed the recent system upgrade. Now I am having multiple problems. It seems to stem from Photo Stream. Activity Monitor shows that Photo Stream is using up gobs of CPU which is strange since it is supposed to not be working...
In iPhoto, under the preferences, it shows that Photo Stream is not enabled. If I check the box to turn it on, it just unchecks itself just as quickly. But in the system preferences, it shows that Photo Stream is set up just fine. Photo Stream is certainly not working. And it seem to be totally screwing up iPhoto. I have tried multiple iPhoto fix options (option alt fixes, restoring a backup library, uninstalling then reinstalling iPhoto) with no improvement.
I'm not sure if the problem is coming from iPhoto or iCloud Photo Stream problems. I am running OSX 10.8.4 on a 3.4 GHz Intel Core i7.
Can anyone tell me what to do? Thank you so much!

Well Old Toad, I am stumped.
I double checked and logged out of iCloud in both user accounts and made sure that PS was not enabled on either library. Then I restarted the computer. I went back to my main user account (second account set up = non administrator account) and to my main iPhoto library, logged into iCloud, tried turing on PS = did not work.
If I do the exact same thing as above for a restore of a backup of my library = does not work.
If I do the exact same thing above but log in with my first account (not my main one but it is the admin account on the computer) and access the test library I created = PS works just fine with no problem.
It seems the problem with PS is limited to my primanry account (non-admin). Do you think the admin privaledges difference between the two accounts could be the problem...?
As always, I am thankful for your time and advice.

HT201317 When I connected my phone and my iPad not all the photos in my photo stream moved over. Why not and how can I fix it?

When I connected my iPhone and iPad via iCloud not all photos in my photo stream copied over. Why not and how do I fix it?

Welcome to the Apple community.
Only the last 30 days of photos are kept in photo stream in the cloud for syncing. Devices that have been syncing with photo stream for some time may retain older photographs that newer devices do not receive from photo stream.

Nokia c2-03 online video streaming problem ...:(

Hello.
I have purchased new nokia c2-03, and i thought the phone would b awesome as its a nokia product. But this phone disappointed me a lot. The phone has good features being a low cost phone. But the main problem is it can't stream online videos. Its very strange to belive, i never thought that NOKIA could b so careless please nokia solve this streaming problem in next firmware update..
Lookin forward for a reply.
-GURU

ENG
I Am Sorry. In fact had the DST setting to + 1:0 and I changed to 12:0 am; As the clock time was delayed, because in Portugal we are indeed in summer time!, I changed the time directly. Unfortunately the reminders remain with an hour of advance. The alarm clock that is set crescento for 7:15 minutes as the set initially and never changed. The first reminder has been set for the 7:15 but is now changed to 6:15 due to this error. Does anyone have any suggestions other than modify all reminders. I would add that the Firmware of the Nokia C2 03 est actualized to a V7.48.
PT
Lamento. De facto tinha a definição de hora de verão para +1hora e alterei para 0horas;
Como a hora do relógio ficou atrasada, pois em Portugal estamos de facto na hora de verão!, alterei directamente a hora.
Lamentavelmente os lembretes continuam com uma hora de avanço.
A crescento que o despertador está definido para as 7:15 minutos como o defini inicialmente e nunca sofreu alterações. O primeiro lembrete foi definido para as 7:15 mas está alterado para as 6:15 devido a este erro.
Será que alguém tem alguma sugestão que não seja modificar todos os lembretes.
Acrescento que o Firmware do Nokia C2 03 está actualizado para a V7.48.

New Radio Station & Streaming Problems

I have added my favorite Public Radio station to my iTunes library, but I can not get it to connect. It shows up in the library as a radio station, but nothing happens when I click on the play button.
In addition, I'm having trouble with all the radio stations I've tried that were already in the iTunes folder. I've tried changing the streaming buffer size in preferences, but the network keeps stalling and needing rebuffering, regardless of the streaming buffer size I choose.
PowerBook PowerPC G4 Mac OS X (10.4.2) Other computer is iMac, OS X v.10.3.9

I single file in a playlist repeats constantly for me (just tried it - don't usually have playlists for single items), but I have never tried using repeat on an audio stream. I expect the repeat doesn't work with streams because iTunes never gets an end-of-file notification which would then tell iTunes to start again at the beginning - but that is just a guess.
What happens if you open the stream in Quicktime? If the stream is in iTunes library, you can open it's Get Info box, click on Edit URL on the summary tab, and you can then copy the address to paste into Quicktime's Open URL. If the stream is one on the default iTunes Radio list, drag it into your Library and you can then click on the Edit URL button to copy the address. iTunes an Quicktime are not exactly the same, so you may get different results. You could also try VLC Player". Testing streams in another player may help you identify if it is really iTunes at fault.
I usually don't have streaming problems, although I rarely have a stream on longer than 2 or 3 hours at a time and I think about 5 hours is the longest I've had a stream running.

Streaming problem over DLNA

Similar Messages

Maybe you are looking for