Streaming & Syncing....can you do both?

I have a 160GB Apple TV and I can't seem to Sync or Stream anymore. Says there is Firewall issue but firewall is not turned on and don't have any aftermarket firewall software. So currently I cant stream or Sync.
Seems to have a problem when i try to setup the photo syncing. I have Aperture and trying to select only a few albums and NOT my entire 70K image library.

it's a bit hard to tell if you're looking for help in reguards to you problem with the connection to your appletv as you can't sync or stream
of if you are asking if you can do both
if the later then yes if you use custom sync and pick the stuff you want to sync from your lib the rest of your lib will stream

Similar Messages

Can you use both an employee discount and a military discount on one account?

Can you use both an employee discount and a military discount on one account?

No.
You can only have one ELEU (Employee Corporate Discount) on an account
So choose the one that has the greater percentage which is probably the military.

Can you setup both VPN server and Back to My Mac on Lion Server?

I have been trying to figure out if this is possible for some time. Can you use both Back to My Mac and VPN server services at once on a OS X Server?
So far here is what I have found:
- According to http://support.apple.com/kb/TS1629 Back to My Mac and VPN use the same UDP ports(500,4500)
- I have been able to get my VPN service working by removing all access for Back to My Mac(in System Preferences->iCloud) as well as removing all "Mobile Me" access on our AirPort Extreme.
The moment I try to add an account to access the network via Mobile Me(ie Back to My Mac) on the Airport Extreme, I am no longer able to make a VPN connection.
Checking the Service VPN Logs, no log entry is shown for the failed connection.
So, my questions are:
1. Has anyone been able to get these two working on the same server/network?
2. Is there any way to change the default ports used by the VPN server service on Lion Server?
Thank you to anyone that can provide any suggestions.

Just as FYI....I just started using iCloud and tried the "back to my mac" on a mac server that is my VPN server.
Enabling "back to my Mac" prevents the VPN from being useable.
Disable "back to my mac" and the VPN works again, as verified from both another MAC and an iPhone.

HT1212 I have previously synced my iPod with iTunes, but then I changed my computer and all the backups were there but i had to reinstall itunes and it won't sync, can you help?

I have previously synced my iPod with iTunes, but then I changed my computer and all the backups were there but i had to reinstall itunes and it won't sync, can you help?

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

HP Photosmart C4700 can you use both ?

On aHP Photosmart C4700 can you use both the USB at the same time use the wireles to be able to print to the printer from 2 different devices using the 2 different ports, USB and wireless?

Yes.
It will work but why do you want to do it? Is one of your computers not on your network? A wireless printer can take printing and scanning commands from both wired and wireless computers.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How quickly does photo stream sync for you?

how quickly does photo stream sync for you?

I have seen some posts floating about here complaining that photos don't or at least don't immediately sync to all devices. I think a small number of these people may not realise that syncing requires wifi and not 3G, one must also remember this community is like a doctors surgery, it is where people come if they have aches and pains.

Can you maintain both lossless and lossy versions of a library?

I want to rip my entire CD collection losslessly to a large external drive for listening in my living room (streaming via an Airport Express). But I also want to down sample the entire library to 160kbs for storing on my iPod. Can iTunes support both versions simultaneously? If so, is there an easy way to get it to down sample every song in my library to 160 kbs?
Is Apple Lossless the only lossless format that will work?
Would it be better to use some software other than iTunes for managing a music library like this?
Thanks.

Yes, you can definitely do this, although it's a bit complicated with iTunes.
You would need to keep a watchful eye over your import settings (in Edit > Preferences > Advanced > Importing) so that you know when you're going to be creating Apple Lossless files as opposed to AAC files, using the settings you desire.
Also, it would be helpful to display the Kind colum in your iTunes library window so you can easily distinguish between Apple Lossless and AAC versions of your songs. You can do this by going to View > View Options and checking the Kind box.
Then you can do some kind of sorting based on file types, etc. Additionally, you may want to create a specific playlist (this could even be a Smart Playlist based on file type/kind) for your lossy AAC files, for example. Then when you connect your iPod, you can manually select that playlist as the one you want to sync with the iPod. At the same time, your main (visible) iTunes library would display only the Apple Lossless versions of your songs for your usual listening and streaming via AirTunes.
Just to be thorough, since I haven't mentioned it yet, you can convert your Apple Lossless files to AAC by selecting all the Apple Lossless files, setting your encoder to AAC with the desired settings (as described above), and using the Advanced > Convert Selection to AAC menu.

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can you have both flex tools and automation running

HI
I might be wrong and I. Hope that I am!!!!
But I seemed to me that it created some automation on a track ...
And then realised after a while that the flex tool was turned off and when to switch it back on and the automation turned off..
I am right in thinking that you can't have both the automation and flex tool running at the same time...?????
Anyone out there know the answer...
Thanks!!!

It would appear that you can't be in both modes simultaneously. You toggle between them.
However, they are very different types of functions, and it would be difficult to manipulate Flex markers with Automation enabled. You'd be drawing nodes when you needed to be fixing timing issues.
Toggling between them is easy enough.

Can you run both the latest Safari along with 4.0 beta?

I'd like to play with the Safari 4.0 beta, but can't afford to lose my regular Safari along with its bookmarks, bank links etc.
Can I run both on the same machine and just start up whichever one I want?
P.

Is there any possibility that the new Safari-4beta is causing my menus to freeze-up? I find my menu bars are often dead and I have to switch to another program-- even those are sometimes dead too, and after 30 seconds one comes to life, then they all do, but then go back to frozen again.
I wouldn't put anything past Safari 4. Its mere presence causes the currency converter widget to give wrong answers.
I tried to use the uninstaller, but it would not work; then I tried to just install Safari 3.2.1 - but it would't do this "Can't install since you have a newer version on your Mac"-- Safari 4 Beta did NOT do this on TIGER- but this was my weekend to switch to Leopard after 13 months of prepartion...
If the unistaller won't work, I don't think there is any way to get back to the old Safari without either reinstalling OSX, or restoring from Time Machine (using the Utilities menu on the Leopard install DVD) and choosing a backup before you installed Safari 4.

Layout: can you have both 2 column and 1 column in same doc?

Can you?

The tab definition determines whether or not the tab gets leaders. Right
now you have, probably, one tab defined, and that tab is defined with
leaders. You need two tabs, first one defined without leaders (to get
from auto number to head), second one defined with leaders (to get from
head to page number). I actually like to use another tab in there so the
leaders all line up and stop before they get to the numbers.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Can you run both 10.6 and 10.7

Can I run both operating systems 10.6 and 10.7. Some of my third party software is not working in Lion. I so how do I do it?

Install Mac OS X 10.6 on a different partition or drive. This won't work on PowerPC Macs or any Mac which shipped with 10.7.
(59588)

HT2480 When I am setting up exchange / outlook mail, I am not getting option to select the folders for syncing, can you please help me to solve this problem

In outlook mail mails are not getting downloaded and option to select the folders to sync is not visible in the exchange setup

See:
* http://www.ehow.com/how_6609141_remove-bearshare-spyware.html
* http://www.fanhow.com/answers/question-77222-how-to-delete-bearshare-search-from-firefox
You can look for a "Mediabar" program under "Control Panel > Programs and features"
See also this forum thread about BearShare:
*[[/questions/792580]]
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Can you have both Wireless and USB printing configured simultaneously on HP Laser mono 1102w

Hi Guys / HP,
Just wondering if you can have the HP Printer mono laser p1102w setup for both USB2 cable hard-wired to notebook and for wireless connections concurrently.
Trying to install printer with both setups via install CD on my HP notebook Pavilion dv6.
Because when installing the printer CD it asks for one or the other i.e. USB or Wireless.
Is there an easy workaround.
Regards
Mike
[Content Removed]
This question was solved.
View Solution.

Hello,
You should be able to connect both, but not Ethernet and wireless at the same time.

Trying to reverse Dropbox AddressBook syncing, can you help?

I need some help here. Only Mac experts that know how to use the terminal need apply.
So, before iCloud, I set up my dropbox to store my Address Book data so that all my Macs' Address Book could access the same contact data files. Now with iCloud, this is no longer necessary. These are the steps I followed to achieve this:
Step 1
Download and install the Dropbox app, and back up your Mac's Address Book (go to File > Export > Address Book archive). To begin, open your Mac's Terminal utility. Enter this command:
mv ~/Library/Application\ Support/AddressBook ~/Dropbox/
to move your Address Book data to Dropbox.
Note: The backwards slash after the word "Application" is the way spaces in folder and file names must be represented in the Terminal app. By putting a backslash before each space, Terminal knows you're really looking for the folder named "Application Support."
Step 2
On a new line, type
ln -s ~/Dropbox/AddressBook/ ~/Library/Application\ Support/AddressBook
to redirect your Mac to Dropbox whenever it tries to access Address Book data.
Step 3
On your second Mac, go into your User Library and delete the Address Book file (it's in the same place it was on your first Mac, in ~/Library/Application Support/AddressBook).
Then, open Terminal and re-enter the code from step 2. The two Macs should be linked!
So now, I have all my contacts on my iPhone (which is good) and I have erased the Address Book folder in my dropbox. I have also gone back and recreated the Address Book folder in it's original location (HD-Library-Application Support-AddressBook). iCloud is setup to sync contacts on the iPhone and on the Mac, but the address book is empty and so is the Address Book folder.
How do I reverse what was done in Step 2 so that the Mac looks for AddressBook data in the original location? Any ideas?
*Also, when I open Address Book it won't let me make a new contact card, and after trying to do this, the Address Book option in the iCloud settings in System Preferences uncheckes itself.
*For the sake of troubleshooting, I recreated an AddressBook folder in my dropbox and tried to reverse Step 2 by typing this in the Terminal:
ln -s ~/Library/Application\ Support/AddressBook/ ~/Dropbox/AddressBook
But I get this response:
ln: /Users/x/Dropbox/AddressBook/: File exists

The page that you posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link on your account.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Streaming & Syncing....can you do both?

Similar Messages

Maybe you are looking for