Streaming video and USB woes

Hello, I have 10.5.7 installed on a macbook pro (october 2006 model).
When I am watching streaming video in safari (I'm a baseball fan, and keep up with my team on mlb.tv), I have issues with my USB ports. For some reason, they turn off and on while streaming video. All of my harddrives, mouse, and keyboard disconnect and reconnect a few seconds later. I am using 2 powered USB hubs and the issue happens no matter the configuration. And it only happens when I stream a video (in flash, if that matters).
Please tell me there is a fix, because my computer is basically unusable when this starts to happen.
Thanks,
-Daniel Brim

If you have items connected directly to the computer, do you have issues? Try connecting 2 peripherals at a time to your computer (or 3, if you have that many USB ports on the computer) and see if they work fine. If so, the problem may be with the hubs you're using.
~Lyssa

Similar Messages

Problems with streaming videos and sound

Hi,
I'm having troubles with streaming videos and I also have sound issues. After upgrading to latest flash player version, everytime I stream videos on the internet (youtube,vimeo,etc.), videos are constantly freezing every 7 seconds. It is so annoying. Also, my audio does not work.
With greatest respect, I would be eternally grateful if you could help me with this.
Jelmar

Everything will be find if you follow those step
Install Window XP service pack 1 or later version
then after install flash the BIOS to V 1.4 from the one that given (1.3)
After flash then enable the Sound card feture and choose Azalia and not AC97 Then at the same time enable the USB and Lan.
Final restart again the computer. The window should detect the 3 thing. Last last install the driver from the CD given. Then everything will work out.

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

I can stream video and movies to my imac. How can i stream these thru my apple tv to a TV screen/

I can stream video and movies to my iMac. How do I stream these thru my Apple TV to my TV?

If you don't get an answer here, you might want to post in the Apple TV discussion here.

E1500 wireless router having problems streaming video and netflix

We got a new E1500 router 2 nights ago. The internet works fine, but it has big trouble streaming videos and Netflix, those types of things. I have changed my MTU setting and all the settings suggested in the "Guide Me" section. My drivers are up to date on my router and on my pc. It just started happening with this router. We had a Netgear before and we have no problems streaming at all. I have rebooted and reset the router and cable modem.
Does anyone else have some suggestions I can try?
Thanks,
Debbie

The concern that you have is for both wired and wireless or just for the wireless? If it is for wireless then try these troubleshooting steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then go to the Wireless tab, change Channel width to 20 MHz only and change the Channel to 6, 9, 11...Save the settings..
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the status of streaming video and netflix.

Logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

Hi there,
I also wanted to thank you for your response and let you know that I have tried all those trouble shooting things you suggest to no avail.
it seems to me that the first explanations are most likely to be the case.
namely that the program can multithread while the plugs only use one processor (particularly EXS24) which is bloody useless.
also increasing the buffer to 1024 is not an option cause you gotta bloody lay tracks, which means you gotta hear the BG tracks and play yours on top in time otherwise, you record your new tracks and they are so out of time that it sounds like a little kid wanking on a guitar or whatever...
and of course for composition with midi intruments it doesn't work at all cause your latency becomes so huge that you would need a miracle to quantize your off time notes back to normal so that you can arrange, print score, etc.
either way, I hope that my tone is not disrespectful, it is aimed at apple in frustration, I'm grateful for your help.
thank you
David

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

Hi Avonbikerider,
If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
https://discussions.apple.com/thread/4167956
Regards,
- Brenden

Streaming Video and Audio Using Flash

Need help, streaming video and audio using Flash and/or
Dreamweaver, want it to load fast and be very clear. It is
imparitive that I have control buttons. Can any one assit me in the
best methods to follow that will give me the performance variance.
Jason

Check out tutorials & samples here : http://www.adobe.com/devnet/flashmediaserver.html
You can check even fmsguru.com : http://fmsguru.com/tutorials.cfm?tab=all

890FXA-GD65 Video and USB Failure

Hey guys,
After about an hour or two of gaming, my PC loses its video and USB signal, and the power buttons do not work on the case, yet everything internally is still running (all my fans, video card fan, processor heatsink fan). The row of LED indicator lights at the top of the motherboard only displays two bars AFTER I lose signal. At first I figured it was just my video card overheating, but nothing is excessively hot to the touch, and alt-tabbing while gaming to check my AMD Vision Control Center has my video card running at about 70-75*C while in use, and about 48*C idle. Also, if overheating was the culprit, that wouldn't explain my USB devices failing either would it? And twice my PC has completely shut down on me mid-game. I noticed someone else had this problem (the video/usb portion at least), but the culprit seemed to be his ram was 1600, mine is only 1333. And I have never tweaked anything in my BIOS nor have I overclocked my video card. Any suggestions?
MSI 890FXA-GD65
AMD Phenom II X4 970
Thermaltake 650W PSU
Corsair 2x4GB DDR3 1333MHz (CMX8GX3M2A1333C9)
XFX 6850 Black
WD 750GB Caviar Black HDD

Temp. is fine for the graphics card. About the PSU "650 Watt" tells us very little, for many reasons. When it comex to Thermaltake, my own experience says they are usually over-speced and -priced, but have rather low efficiency. My system's power consumption went down from 110 to 74 Watt when I replaced my Thermaltake Toughpower. ...But that was some time ago.
I find two current 650 W PSU models here, if it is one of them:
http://www.thermaltake.com/psu-allseries.aspx

Vividas Streaming Video and Safari

In an attempt to see a video that apparently uses Vividas Streaming video, Safari gives the following error message:
Can't use Java Script here. Cannot run the script "set Mac Loaded Percentage (0)" because Safari does not allow Java script to used in this way.
At least Safari gives an error message. Both Netscape and Internet Explorer just quit when I try to access this video.
I am not an experienced computer user and do not know about Java but would really like to see this video and my internet server could not help. Thanks for your reply.

If you have items connected directly to the computer, do you have issues? Try connecting 2 peripherals at a time to your computer (or 3, if you have that many USB ports on the computer) and see if they work fine. If so, the problem may be with the hubs you're using.
~Lyssa

Streaming video and audio (tv news)

a friend of mine here in England can watch bBBC news 24 on his mobile phone, should my BB be able to do or does it need some special extra softwarethat? or does it need some special extra software?

The curve 8330 handles some streaming formats... With the MobiTV app I'm told you can watch streaming video of various cable channels including news and discovery channels and such. You can also view some video clips from www.youtube.com Not the flash clips of course! As far as streaming audio you can download slacker radio and flycast and have a semblance of streaming audio. I'm hoping for winamp/real audio type support of streaming media very soon to listen to various internet radio stations that aren't included in the aforementioned radio apps. Sidenote: Money rules everything, everywhere

Streaming Video and Design Question

Hi,
I'm coding a screen that displays about 10 components that update with textual information at a pretty low rate (1Hz). Another component on this screen has to display a video stream (I receive pixel data over a network connection, it just contains a grey scale value in each byte).
I have looked into various Java2D related ways to do this. I believe I want to take an active rendering approach using full screen exclusive mode, with perhaps a separate thread for the video stream. A significant class for the video stream seems to be BufferedImage.
I'm looking for some feedback in the design approach (active rendering in full screen exclusive mode, with a separate thread to build and render the video stream), as well as any advice on how to build the displayable image.
Thanks for any advice.

The curve 8330 handles some streaming formats... With the MobiTV app I'm told you can watch streaming video of various cable channels including news and discovery channels and such. You can also view some video clips from www.youtube.com Not the flash clips of course! As far as streaming audio you can download slacker radio and flycast and have a semblance of streaming audio. I'm hoping for winamp/real audio type support of streaming media very soon to listen to various internet radio stations that aren't included in the aforementioned radio apps. Sidenote: Money rules everything, everywhere

Streaming video and bluetooth stereo

I have the Blackberry Curve with T-Mobile with v4.5.0.81 and the Motorola HT820 stereo bluetooth headset. I am able to listen to regular music and videos on the microsd card on the HT820, but when I play streaming video online there isn't an option to activate the HT820. Is this a limitation of streaming video online, a BB software issue, or a setting I need to change. Thanks!

The curve 8330 handles some streaming formats... With the MobiTV app I'm told you can watch streaming video of various cable channels including news and discovery channels and such. You can also view some video clips from www.youtube.com Not the flash clips of course! As far as streaming audio you can download slacker radio and flycast and have a semblance of streaming audio. I'm hoping for winamp/real audio type support of streaming media very soon to listen to various internet radio stations that aren't included in the aforementioned radio apps. Sidenote: Money rules everything, everywhere

Streaming video and radio

Do you think it will ever be possible to view streaming video? Such as, on ABC.com and so forth. Yes,I know you can buy episodes of favorite shows from iTunes, but that is usually last season and current stuff is available on the web. It seems that some of the things I want to do as mobile, such as NASCAR Raceview, etc are available on other types of ATT phones but not the iPhone and it is supposed to be so cool.
I do love my iPhone, I would just like to be able to do more with it.

gsc,
Separating categories is not going to be possible for the current version of the IronPort URL filter. In 6.3, we are releasing a new category engine that may have some more flexibility in this area.
Let's revisit this inquiry when 6.3 is available. It is currently in early beta.

My internet speed keeps to be occupied when streaming video and closing the broswer!!

My internet speed is fully occupied when streaming a video and going to different points in it (walking through it) then close the tab the speed still occupied even if I close the broswer !!!! (also tried on firefox and chrome), Iam running fresh installation of windows 8.1 enterprise (updated) and my browser versions "firefox 29, chrome 34.0.1847.131m" and flash player 13,0,0,206 and only way till now to stop this is to disable and then re-enable connection from network and sharing center in windows . what's wrong! what should I do?

What you NEED to understand is that Flash Player is ONLY a plug-in for your browser.
It ONLY functions when there is Flash content in a page and ONLY when that content is called into play by a user action (you clicked Play or visited a page where the content was set to "auto play").
If your system is downloading data AFTER you've closed the browser (and subsequently terminated the plug-in), whatever is causing that download is OUTSIDE of your browser and OUTSIDE of Flash Player.
Think of it this way. You have a Blu-Ray movie playing and suddenly... there's a loud screeching sound coming from your stereo. So you stop the movie - the sound continues. You eject the BR disc - the sound continues. You disconnect the BR player - the sound continues. You turn the TV off - the sound continues. You disconnect the TV from the stereo - the sound continues. The sound CANNOT be coming from a source that is completely disabled. Flash player is like the BR Player, your browser like the TV. The data download is like the annoying sound. Something in your OS... be it a setting or even malware... is causing the download of data because a terminated browser and a terminated plug-in cannot cause it.

Streaming video and USB woes

Similar Messages

Maybe you are looking for