Streaming video (esp Netflix) not working. It did before.

I recently had a new hard drive installed in my Macbook, by the folks at the Apple store. I had brought it in for a few reasons; mainly, after a drop on the floor, the laptop was really slow in opening up programs, booting up, etc.
The computer is still running much slower than it used to (?), but the major snags are gone. Except now I have a new problem: When I try to stream video on sites like Youtube, it is really choppy. (Nothing has changed with my internet connection, I know that.) When I go to my Netflix queue to watch instantly, an error message comes up saying that "streaming is not supported for your operating system." Yet my OS is 10.4.11 when the minimum for Netflix is 10.4.8. Even after that laptop was dropped and a lot of the programs were running slowly, streaming videos anywhere from the web was not a problem.
Ideas?? Suggestions??
Thank you in advance!

I have te same problem. You got any fix?

Similar Messages

Quicktime Pro 7.0.3 Streaming Video and HD not working

How do I enable the streaming video for web sites to play in the webpage? All I see is a broken file image in the window where the movie should be playing.

It appears you either don't have the QuickTime plug-in installed or it is turned off.
The page worked fine for me.
Your version of Internet Explorer is showing an "image" placeholder and, obviously, QuickTime is a .mov file.
http://movies.apple.com/movies/paramount/missionimpossible_3/mission_impossible_3-tlr1h.640.mov
Open QT Player, Open URL (File menu) and paste the link above. If it plays QuickTime works. Paste the URL in a different browser and see if it works. If it does then the QT plug-in works which means the issue is with IE.
I would throw IE off my PC and get a real browser.

Acpi_call not working. [did before]

Hi I'm coming back from a short session using Ubuntu. Previously I've always used acpi_call (from AUR) to turn off my Nvida card to gain full battery life. It has served me well all the time but now I cant get it to work at all and since I'm used to keep my laptop with me during the day without power adapter it's kind of a deal breaker.
The procedure:
[root@eta richard]# lsmod | grep acpi_call
[root@eta richard]# acpi
Battery 0: Discharging, 78%, 03:03:57 remaining
[root@eta richard]# insmod /usr/lib/modules/3.6.6-1-ARCH/kernel/drivers/acpi/acpi_call.ko
[root@eta richard]# lsmod | grep acpi_call
acpi_call 4791 0
[root@eta richard]# test_off.sh
Trying \_SB.PCI0.P0P1.VGA._OFF: failed
Trying \_SB.PCI0.P0P2.VGA._OFF: failed
Trying \_SB_.PCI0.OVGA.ATPX: failed
Trying \_SB_.PCI0.OVGA.XTPX: failed
Trying \_SB.PCI0.P0P3.PEGP._OFF: failed
Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
Trying \_SB.PCI0.P0P1.PEGP._OFF: failed
Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
Trying \_SB.PCI0.PEG1.GFX0._OFF: works!
[root@eta richard]# cat /proc/acpi/call
not called
[root@eta richard]#
[root@eta richard]# echo '\_SB.PCI0.PEG1.GFX0._OFF' > /proc/acpi/call
[root@eta richard]# cat /proc/acpi/call
0x0
[root@eta richard]# acpi
Battery 0: Discharging, 78%, 03:01:07 remaining
(edited slightly to make it more readable)
Neither dmesg nor journalctl says anything else than that it was loaded correctly.
Have I missed something or does anyone know any solution?

Lekensteyn wrote:
1. acpi_call does not work through suspend/resumes.
2. acpi_call should not be used when a driver is loaded.
3. use bbswitch instead (see also http://wiki.bumblebee-project.org/Compa … M-methods).
See https://wiki.archlinux.org/index.php/Bu … Management (note that the rc.d script mentioned there is obsolete, it should be converted to systemd).
I see...
Actually I first tried bbswitch but it didnt work so I went back too good old acpi_call, maybe a little bit too quickly. I'll give bbswitch another try!
Thanks

Scale Attribute Times and Paste Attributes not working as did before

Using Copy and then Paste Attributes as I have done many times before upgrading the FCP 5, the option to "Scale Attribute Times" is grayed out and the keyframes are not placed correctly. This happens even if the cips are the exact same duration. I read a post from November that states that this feature is not working is FCP 5. If that is so, has anybody found a work-around or know of a fix?
Dual 1.25 G4 Mac OS X (10.3.9) FCP 5.0.1

The problem is that the content is replaced correctly but the keyframes move (they were originally at the beginning and end and now they are not). The "Scale Attribute times" box is grayed out.
I just tested this out and, from what I can tell, FCP (5) now needs Timecode to match in order for Paste Attributes > Content (with keyframes intact) to work as we'd like.
I placed a 10 sec image - with (the default settings of) In at 1:00:00;00 and Out at 1:00:09;29 - in the Timeline. I set keyframes for Scale & Rotation at the In and Out points (100% & 0 degrees -> 200% & 360 degrees)
When using the Paste Attributes > Content method with a second image having identical timecode In & Out, it works fine.
However, if the second clip's timecode is not the same - say In is set at 1:00:02;00 and Out set at 1:00:11;29 - then the content will be pasted but the keyframes will not adjust for the new timecode. They remain at the first clip's points (that is,1:00:00;00 and 1:00:09;29).
So, you can try to match timecode (which isn't always convenient) or you can...
Select the first clip & copy
Overwrite/replace the (first) clip with the second clip
Paste Attributes > Basic Motion (or whatever attributes you're pasting, except Content)
Or was that a workflow you were hoping to avoid?

HT204291 When I airplay "Dish Anywhere" to my Apple TV I only get audio,no video. Other streaming videos ex Netflix is fine ?

When I airplay "Dish Anywhere" from my IPad Air to Apple TV, I only get audio, no video. When I Airplay other streaming video(ex Netflix) everything works fine. I would appreciate any input

Not all apps are enabled for airplay, this is up to the developer to do.

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

E1500 wireless router having problems streaming video and netflix

We got a new E1500 router 2 nights ago. The internet works fine, but it has big trouble streaming videos and Netflix, those types of things. I have changed my MTU setting and all the settings suggested in the "Guide Me" section. My drivers are up to date on my router and on my pc. It just started happening with this router. We had a Netgear before and we have no problems streaming at all. I have rebooted and reset the router and cable modem.
Does anyone else have some suggestions I can try?
Thanks,
Debbie

The concern that you have is for both wired and wireless or just for the wireless? If it is for wireless then try these troubleshooting steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then go to the Wireless tab, change Channel width to 20 MHz only and change the Channel to 6, 9, 11...Save the settings..
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the status of streaming video and netflix.

After installing ios6 on my ipad 2 I can't stream video on Netflix and it locks up my router

After installing ios 6 on my ipad 2 I can't stream video off Netflix and when I try to it locks up my router is there a fix for this?

After installing Lion the system won't recognize the G-Tech External drive via USB, but reconnected to Firewire and works okay. Have an Apogee duet that needs the FW port, so really need to get the drive connected via USB. Appreciate any assistance.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Video tag is not working in firefox how can we remove this error

Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Streaming video (esp Netflix) not working. It did before.

Similar Messages

Maybe you are looking for