Streaming videos and password prompt problem...

Hi there,
So I have been trying to watch the latest Apple keynote stream from the Quicktime page but every time I try to watch it, it asks me for my University library username and password. Why is it asking me for this stuff? I havent entered the information yet because it seems completely out of place to be asked for it when I want to watch an Apple stream.
I am not currently connected to the University network in any way right now and I havent connected to it in that particular way (proxy server) in a very long time.
I have cleared all of the old proxy settings and I have also tried deleting all of the .plist files for quicktime with no luck.
Anyone have any ideas as to why this is happening?

Have you tried repairing disk/permissions from your Tiger DVD?
I really don't know why you are being asked a password.
CLICK-->http://events.apple.com.edgesuite.net/r27842e/iphone/4283965492ip.mp4

Similar Messages

E1500 wireless router having problems streaming video and netflix

We got a new E1500 router 2 nights ago. The internet works fine, but it has big trouble streaming videos and Netflix, those types of things. I have changed my MTU setting and all the settings suggested in the "Guide Me" section. My drivers are up to date on my router and on my pc. It just started happening with this router. We had a Netgear before and we have no problems streaming at all. I have rebooted and reset the router and cable modem.
Does anyone else have some suggestions I can try?
Thanks,
Debbie

The concern that you have is for both wired and wireless or just for the wireless? If it is for wireless then try these troubleshooting steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then go to the Wireless tab, change Channel width to 20 MHz only and change the Channel to 6, 9, 11...Save the settings..
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the status of streaming video and netflix.

Problems with streaming videos and sound

Hi,
I'm having troubles with streaming videos and I also have sound issues. After upgrading to latest flash player version, everytime I stream videos on the internet (youtube,vimeo,etc.), videos are constantly freezing every 7 seconds. It is so annoying. Also, my audio does not work.
With greatest respect, I would be eternally grateful if you could help me with this.
Jelmar

Everything will be find if you follow those step
Install Window XP service pack 1 or later version
then after install flash the BIOS to V 1.4 from the one that given (1.3)
After flash then enable the Sound card feture and choose Azalia and not AC97 Then at the same time enable the USB and Lan.
Final restart again the computer. The window should detect the 3 thing. Last last install the driver from the CD given. Then everything will work out.

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do i stop an old apple ID and password prompt from always popping up on my phone during normal use ?

How do i stop an old apple ID and password prompt from popping up on my phone screen during normal operations ?

How to change the Apple ID on my iOS Device
Settings > iTunes & App stores.
Tap your Apple ID, sign out then sign back in with new AppleID.
Settings > Facetime.
Tap your Apple ID, sign out then sign back in with new AppleID.
Settings > Messages.
Turn off iMessages, wait 10 seconds, then turn it back on. Go to 'Receive messages at' and then tap your Apple ID. Sign out of the old ID, then sign in with new Apple ID.
Settings > iCloud.
Delete the account (make sure to KEEP the information on your phone), then turn it back on with new Apple ID.
Also, delete any apps that were downloaded with the 'old' Apple ID, then reinstall them with your 'new' ID.

I can stream video and movies to my imac. How can i stream these thru my apple tv to a TV screen/

I can stream video and movies to my iMac. How do I stream these thru my Apple TV to my TV?

If you don't get an answer here, you might want to post in the Apple TV discussion here.

Cannot see AAA banner, username and password prompts on IOS switch

Hi,
I have configured RADIUS authentication for VTY access to a Catalyst 2960S running 15.0(2)SE2.
The RADIUS server is a Microsoft server running the Network Policy and Access Service role (Microsoft's own RADIUS server).
Everything is ok apart from the login prompts. I want to customise these with a banner, username prompt and password prompt. I have added the lines below to my config:
aaa authentication banner ^Chello^C
aaa authentication password-prompt "Enter your password:"
aaa authentication username-prompt "Enter your username:"
However when I ssh to the switch I just see the output below:
login as: james.hawkins
Using keyboard-interactive authentication.
Password:
ASWTRE-BF01#
My config is shown below:
aaa authentication banner ^Chello^C
aaa authentication password-prompt "Enter your password:"
aaa authentication username-prompt "Enter your username:"
aaa authentication login default local-case
aaa authentication login SSH group radius local-case
aaa authentication enable default enable
aaa authorization exec default local
aaa authorization exec SSH group radius local
radius server TREREC-01
address ipv4 10.3.32.51 auth-port 1812 acct-port 1813
key 7 08171E61K281D08461C
line con 0
logging synchronous
line vty 0 4
exec-timeout 360 0
authorization exec SSH
logging synchronous
login authentication SSH
transport input ssh
line vty 5 15
exec-timeout 360 0
authorization exec SSH
logging synchronous
login authentication SSH
transport input ssh
Is there anything that I am missing?

James:
you use the line:
aaa authentication login SSH group radius local-case
are you sure that the RADIUS is reachable? if the radius is not reachable it will check the local DB for the username. I am not pretty sure if local DB auth displays the banner.
Rating useful replies is more useful than saying "Thank you"

Cannot purchase songs on iTunes. After I enter Apple ID and password, Prompt says I need toed to verify my Apple ID. I enter my password again and never get the verification email.

Cannot purchase songs on iTunes. After I enter Apple ID and password, Prompt says I need toed to verify my Apple ID. I enter my password again and never get the verification email although my Apple ID and email are correct? Whats up with that?

from this support article:
How do I verify my Apple ID by email?
Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID.

Logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

Hi there,
I also wanted to thank you for your response and let you know that I have tried all those trouble shooting things you suggest to no avail.
it seems to me that the first explanations are most likely to be the case.
namely that the program can multithread while the plugs only use one processor (particularly EXS24) which is bloody useless.
also increasing the buffer to 1024 is not an option cause you gotta bloody lay tracks, which means you gotta hear the BG tracks and play yours on top in time otherwise, you record your new tracks and they are so out of time that it sounds like a little kid wanking on a guitar or whatever...
and of course for composition with midi intruments it doesn't work at all cause your latency becomes so huge that you would need a miracle to quantize your off time notes back to normal so that you can arrange, print score, etc.
either way, I hope that my tone is not disrespectful, it is aimed at apple in frustration, I'm grateful for your help.
thank you
David

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

Hi Avonbikerider,
If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
https://discussions.apple.com/thread/4167956
Regards,
- Brenden

Streaming Video and Audio Using Flash

Need help, streaming video and audio using Flash and/or
Dreamweaver, want it to load fast and be very clear. It is
imparitive that I have control buttons. Can any one assit me in the
best methods to follow that will give me the performance variance.
Jason

Check out tutorials & samples here : http://www.adobe.com/devnet/flashmediaserver.html
You can check even fmsguru.com : http://fmsguru.com/tutorials.cfm?tab=all

Streaming video and music from Media Server to N80

Hi
Has anyone any idea (if it's at all possible) how to stream content (video or music) from Home Media Server on the PC to the phone? I can see how to play content on the PC on another uPnP device using the phone as a remote control and I copy files between the PC and phone, but really I just want to play MP3s from the PC on the phone without copying them across first.
Thanks in advance.
BenMessage Edited by karim on 29-May-2006
10:33 AM

Hello,
In Home Media Server 3.4, you are not prompted to create a user account and password through the product. User accounts became available in September 2006 with Home Media Server 4.0.
To give Home Media Server 4.0 a whirl, download it for free at:
http://www.simplecenter.com/nokia/
In addition, the SimpleCenter Knowledge Base and Forum is in the process of being updated. And with luck, the new version will roll out by the end of November 2006. One major change is that the new version will no longer require a username and password to browse the technical articles and forum threads.
Thanks,
Katherine

Reporting Services username and password prompting

We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
them for a username and password and will not allow them to connect even if the correct username and password is correct.
I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

Hi bubba1984,
As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Annoyed by OTN username and password prompting

Sorry it's really starting to annoy me that I always have to enter my OTN username and password between every browser session. Why can it not use a cockie or whatever to keep me logged in at least for the day. Or better, let me save the password in my keychain so that I only have to press the "Sign In" button when the login appears.
Firefox has a built in "save password" option, which will supply username and password when accessing a particular web page. It works with sites like ebay and many other common sites, but for some reason it does not work with OTN. When accessing OTN it never prompts me if I want Firefox to remember the password. I'm not using private browsing and have no site in the save password exception list.
I found an add-on named "Saved Password Editor". It allows to manually add username and password entries associated with a web site. But since almost any software calls home today I rather not use any 3rd party tool to deal with security sensitive information. I checked the tool and it did not call home, but who knows what happens later.
Any other ideas?
FWIW: firefox - How does browser know when to prompt user to save password? - Stack Overflow
Maybe the problem is simply because the login uses "ossusername" instead of "username" in the login form.

So what is the message? I have no particular objection to any solution that fixes the issue, beside installing 3rd party browser extensions.
How about the following? Checking https://login.oracle.com/mysso/signon.jsp on http://web-sniffer.net shows:
Set-Cookie: ORA_UCM_VER=; domain=.oracle.com; expires=Thu, 01-Jan-1970 01:00:00 GMT; path=/
Unfortunately I cannot set my system date prior to 1970 to see what happens, but would the cookie allow me to login without the need to specify my username and password again until the cookie expires? Would that be a feasible option instead of enabling form autocomplete?
Speaking of which, the OTN forum defines "Cache-Control: private, no-cache, no-store, must-revalidate". This setting disables browser caching. I found the browser's back button very useful in the past to be able to get back the content of the forum editor, for instance, when some error occurred submitting the response or when I accidentally opened another web page. This used to work in the previous forum.
The editor's new recovery function so far has been rather confusing or completely useless for me. It does not help after being logged out without notice. It actually just happened and I received an "unexpected error" while posting this response, loosing all text. (Un)fortunately I'm used to either copy and paste the content before submitting or use my own text editor. But cutting and pasting has become a different story now after the forum upgrade with the buggy editor.
Meanwhile I understand that OTN cannot fix the problems with the forum software, but perhaps the login could be improved.

Streaming video and USB woes

Hello, I have 10.5.7 installed on a macbook pro (october 2006 model).
When I am watching streaming video in safari (I'm a baseball fan, and keep up with my team on mlb.tv), I have issues with my USB ports. For some reason, they turn off and on while streaming video. All of my harddrives, mouse, and keyboard disconnect and reconnect a few seconds later. I am using 2 powered USB hubs and the issue happens no matter the configuration. And it only happens when I stream a video (in flash, if that matters).
Please tell me there is a fix, because my computer is basically unusable when this starts to happen.
Thanks,
-Daniel Brim

If you have items connected directly to the computer, do you have issues? Try connecting 2 peripherals at a time to your computer (or 3, if you have that many USB ports on the computer) and see if they work fine. If so, the problem may be with the hubs you're using.
~Lyssa

Streaming videos and password prompt problem...

Similar Messages

Maybe you are looking for