Streamlining language installation of Tiger

Hi,
I am getting ready to upgrade to Tiger and would like to know if there is a way to bypass the non-english language portion of the installation. When I installed Panther it seems a lot of the install time was related to language installation. I'm not a xenophobe...I was just looking to streamline the installation.
Thanks,
Rick

Hello Rick,
I do not know of any way to stop the languages being installed - I am sure there is a way. One neat little Application that will remove the languages is here...
Monolingual
Also...
Deleting all the unused printer drivers can release a considerable amount of space. I managed to " regain " around 2Gigs this way.
Hope that helps some
Regards
Ian

Similar Messages

Multiple language installations

Hi All,
Does anyone have experience of knowledge of having multiple language installations of the same version i.e. both cs6 indesign.
For example having English, French and ME installed, deactivating and activating according to need.
Thanks
Trevor

Thanks Peter, I'll probably give that a go - not too exciting.

Multiple language installer for Adobe Reader

I need a compressed multiple language installer for Adobe Reader to install with my software. Is one available?

When we requested a license to distribute the multi-language version of Adobe Reader with our software, we recieved the following link to a download:
"For full installers: "
"To download the English language version of Adobe Reader 9 with Acrobat.com in compressed .exe format, click here."
When you click on the link, you get a single file (AdbeRdr11006_en_US.exe). This is an installation for english only. I am looking for a single .exe file for a multi-language installation.
The link you provided above is to a .zip file that must be extracted and then run. This requires additional steps in our installation process. We were hoping you have a single installation file to prevent these additional steps.

HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

First of all, uninstall it with the uninstaller.
Then:
Install the ENGLISH version.
Change the language in the CC app to Korean.
Install the Korean version. (DON't uninstall the English version)
Change back the langauge in the CC app to English.
When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

Change language installation

how can i change the language installation of adobe premiere pro cs5.5?

I don't think it can be changed. You would probably need to uninstall and reinstall a different language version.

Dutch Language Installation

Hi,
We have a situation.
Initially we had English language as default language installation. Later we had a requirement to have Dutch language.
Our basis consultant did the necessary installtion.
Post installation when we checked the initial logon screen shows dutch language, after loggin in the left hand side ribbon menu is blank.
menu options are blank. Similar is the case with Admin
what are we missing here?
Inputs appreciated.
Thanks.

Hi ,
Can you please go through the below notes.
1611477 and also 1605394 for users with the same problem for other languages.
Hopefully this should resolve your issue. thanks.
Regards,
Sanjeev

Mexico: Language Installation

This might seem like a silly questions, but for those with Mexican companies, or operations in Mexico, what language did you install? I installed Spanish and received a comment from the user in Mexico, who's helping me test, that the Spanish in Mexico is a different dialect than the Spanish language installation, and that for her, using English is easier.
There's not a Mexican version of the Spanish language that can be installed for SAP is there?
Thank you.
~TJ

Well - especially for Spanish the differences can be pretty significant (e. g. see http://en.wikipedia.org/wiki/Spanish_dialects_and_varieties) across the world.
Thats correct theres still a lot of dialects still widely spoken in Spain, The Spanish that is used as a standard and was inherit by people in the Americas (Mexico Included) is called "Castellano"...
A bit more,
http://en.wikipedia.org/wiki/Spanish_language
http://en.wikipedia.org/wiki/List_of_countries_where_Spanish_is_an_official_language
Saludos (Regards)
Juan

Is language installation version dependent ?

Is the language installation depends on the SAP version ie. if there is CD for installation of language into 4.6c system will it work on ECC 6.0 or for XI or 4.0. ?

Hey,
Every version of SAP system has it own localization language installation. for example, ECC6 might have some texts that
4.6c doesn't have.
Installation of ecc 6.0 will not work on XI 3.0 (sap will not release XI 4.0, instead they would release PI 7.0) due to the fact that most
of the translation in ECC are not relavant in XI (for example, material number is not an entity in XI).

Hungarian Language installation steps

Please let me know, what are the steps to be taken to install the Hungarian Language in 46C environment in a non-Unicode environment?
We are also planning to upgrade to ECC 6 and conversion to Unicode, How does this Hungarian Language installation will affect the upgrade to ECC 6 and conversion to Unicode?
Your help will be highly appreciated
-Al Mamun

Hi Al,
I assume you are having a System based on Latin-1 (Western European Code Page).
In this case, SAP highly recommends to do the upgrade and the Unicode conversion BEFORE introducing Hungaria. Otherwise you have to switch the system to MDMP (because the Hungarian language is not included in the Latin-1 code page) and this causes significant additional effort during the Unicode conversion !
Therefore the recommendation is:
1) Upgrade and Unicode Conversion
2) Installation of the Hungarian Language (which is then a standard installation according to the Language Installation Guide)
Please also have a look at notes 79991 and 73606 for further information.
Best regards,
Nils Buerckel
Solution Management
Globalization Services
SAP AG

Language Installation of Sri lanka language Sinhalese, Sinhala

Dear Gurus,
We have requirement to perform Language installation for below three languages.
1) Bahasa , Indonesia
2) Sinhalese, Sri Lanka
3) Vietnamese, Viet Nam
I am able to find separate Language CD for "Vietnamese" but i am unable to find CDs for Bahasa or Sinhalese.
Does any one have any CD number or have performed language installation for these earlier can throw some light on same?
Warm Regards,
Shravan

In fact for base ECC6 there are separate medias for some 'extra' languages...
At least there is one for Vietnam.
I did not found the two others. At least you can find the lang. key in note
73606 - Supported Languages and Code Pages
Maybe you should open a message to support with comp. BC-I18
Regards

QT 7.2 installer for Tiger ?

Anyone know where I can get the QT 7.2 installer for Tiger (PPC Mac)?
I've searched all over Apple's download site and the only versions I can find there are 7.4 and 7.4.1
Thanks in advance for any help you can give.

Thanks. That's a great link.
In the meantime, I found the specific download in a thread in the Final Cut Express forum.
Here's the link - http://www.apple.com/support/downloads/quicktime72formac.html

French language installation error in SMLT

Hi experts,
Here i have got the requirement to install FRENCH language installation in ECC and SRM environment.
My ECC system is ECC6.0 with EHP4/NW 7.01 and SRM is SRM 7.0/NW 7.01.
I have installed the French language installation in my ECC sandbox to test it before do it in actual Environment .I am using SMLT to install French language installation in 000 client .while doing the installation one of the transport request (Request no 5) got failed and rest of them are installed.
I have setup the parameters in RZ10 for Installaed languages and second language to E restarted the server .
Users are able to login with French language ,users are able to access FI functionalitybut when the MM configuration doing they are unable to see the values inF4 (help) MM03 and MM01 tcode.It gives all starts (****************) in F4
I have raised oss message and working with SAP..
In parallel i need to check is there anyone faced this type of situvation in your environment while installing French language.
Please look at the logs for the TRansport request No5:
The below error messages are in RED for Transport Request 5
(SAPKLFRSR1EHP4ERP6F5).
Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
orig. lang. is missing
Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
orig. lang. is missing
Language FR for STYLE ESRINV in client 000 not imported, since orig.
lang. is missing
Language FR for STYLE ESRINV in client 000 not imported, since orig.
lang. is missing
Object imported and activated
Errors occurred during post-handling AFTER_IMP_STYLE for STYL L
The errors affect the following components:
BC-SRV-SCR (SAPscript)
Please let me know your ideas on this.
Thanks&Regards
Janakiram
SAP BASIS ADMIN
Do NOT use UPPERCASE in the subject
Edited by: Juan Reyes on Feb 8, 2011 11:24 AM

Hello
Please have a look at below points
1. any language is imported first in 000
2. for every language some text which is not translated has to be supplemented with Englisg or German
3. there is periodic supplementaion if new support packs or notes appled in system in future
4. once language is in 000 it has to be copied and supplemented in all oter clients
5. Please see that all above steps have been taken care or not
6. I suspect since users are able to login and work in system and only some characters are shown as * ,check supplementation part
But this is my guess .
Please see all language related notes
Hope this helps
Success!!

Classic option does not work in new installation of Tiger

This problem is in a new installation of Tiger 10.4.6 on a G4 Cube. First I ought to say I am really happy with the Tiger OS. It runs really well on my Cube. The problem is - the Classic option in the System Preference folder will not open. It starts up like it will, tells me I should update the Quicken version to 6.3, and when it has finished opening it flashes a Classic icon in the dock, which just as quickly disappears. I have tried to open it by opening an application that needs it to run, and I have tried to open it with extensions off, with the same result.
I can reboot to OS 9.2.2 and I have done that several times with no problem. I just wonder why the Classic option in Tiger is not working? Could it be a memory problem: not enough? I have 384MB

Malcolm,
Thanks for the reply. Yes, I read that there might be a possible extension problem in Classic, and I did try it with the extensions off as you suggested. It still will not start up. I will try again later from a "clean" start, and if all else fails I will call apple support, but I hate to do that as it's a bit like never, never land.
Clay

First time installation of tiger

GREETINGS!
i am on 10.2.8 on a gigabit ethernet 450do. it has never had the disk erased since i got it new, with os9.
i just got a 10.4.6 install replacement dvd from applecare.
when i finally get a clone made of my computer, should i erase the disk and install, being it is eight years old? i'm wondering if that wil give me any added performance, stability - or?
otherwise should/can i do an archive and install from 10.2.8 to 10.4.6?
last - and i know there is a lot of controversy over this - should i install the os on its own partition, and if so, how big should it be?
same for the external hd - it is brand new [today!] with nothing on it yet; should i partition that, and/or put the os on its own partition?
thanks very much - and happy thanksgiving!
chris in ny

Were I you I would make your clone then test the clone to be sure it will boot the computer. Then boot from the Tiger DVD and do an Erase and Install which will completely wipe the drive before installing Tiger.
Obviously you could partition the drive if you want but there is no compelling reason to do so.
If I were you I would also reformat the external drive before you clone to it and reformat the main drive as well:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. There is no SMART info for an external drive. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

My Power Mac stuck in installation for Tiger.

i tried to install tiger to my power mac G5. One of the disks i found broken, and it wont let me exit the installer,
I dont want to be on tiger, i just want to use my mac.
Maybe there is a way to either exit the installer, or reboot the mac.
Thanks,
PS. my warranty ran out a year ago

You'll need to power down the Mac, then Repair the Hard Drive.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
If it was the 2nd Disc that messed up, That second Disc thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442

Streamlining language installation of Tiger

Similar Messages

Maybe you are looking for