Street line formating issue (number comes before the street name)

Hello everyone,
I have an issue regarding formatting of the street line - when I include an address field (say in Smartforms) the street number comes before the street name. This would be according to USA standards, but I need it to be formatted by the EU standards (street name, and then the number). Also, where ever we have an address attached (SU01, customer/vendor master recs, purchase orders, etc) we get the same issue.
So, now it is: "1234 MyStreetName", but I need it to come as "MyStreetName 1234".
I have tried SA10, SA09, OY01 (and all the other customizing I could find), none of which had worked. The strange thing is that in our IDES system, it is displayed as it should be (name - number).
I can't find where this is preconfigured in IDES, so if anyone can suggest I would be very gratefull + points will be awarded for all the helpfull answers.
Best regards,
SD.

This thread has been moved here:
Street line formating issue (number comes before the street name)

Similar Messages

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

Is the store that you bought it from close so that you could try going back to them and ask them to activate the card properly ? If not then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Use of ( * ) prefix before the table name

Friends,
Can anybody clear me the importance of prefixing the *(asterik) before the table name in the program.
Eg. Tables: *mara,
*cstk.
Many Thanks,
Albert.

When you need two distinct work areas of the same database table in your program, you can use two tables declarations like
Tables: mara, *mara.
Typical use is on a screen, that has a table control. Here same table fields may appear on the main screen as well as in the table control. You use normal work area ( mara) to refer to main screen fields and the other work area ( *mara) for table control fields.

Formatting issues in iBooks on the iPad

Hello,
I'm creating iBooks to publish on the iBookstore, but am having some formatting issues, or so I think at least.
I have already created one iBook (http://itunes.apple.com/gb/book/id387336687, apologies for the morbid subject matter), which I tested on my iPhone (iOS 4.0) before publishing, and everything appeared correctly. Since then I've purchased an iPad, and have noticed that some of the formatting, namely text alignment, has lost it's formatting. This formatting issue only seems to effect the text, as all images look fine.
I'm creating the iBooks in InDesign CS5 and Sigil, of which I've checked the CSS and everything seems correct.
I'm wondering whether this is an issue with the current iPad iOS, and will be fixed once iOS 4.2 is released. But if anyone can shed some light on why this might be occurring, it would be much appreciated.
Many thanks

Omnipress wrote:
I'm wondering whether this is an issue with the current iPad iOS, and will be fixed once iOS 4.2 is released.
I don't think anyone knows. It could even create a new set of issues by disabling many of the hacks floating around on blogs.
But if anyone can shed some light on why this might be occurring, it would be much appreciated.
Typical iBooks CSS issues coupled with overly complex InDesign source. I took a different route and reformatted my source into super-simple XML and then generated my ePub from that. I still have all the same iBooks and CSS issues, but I am in complete control of my content.
It is always best to test books on the target device. That shouldn't be a problem now that you have an iPad. However, if you are making decent money, it might be a good idea to keep one iPad on 3.2.2 for testing. That would be the ideal. I don't see the iPhone as being a really big iBooks market. I would focus on testing on the iPad.

Is there a way to make the #'s and symbols come before the letter A?

So say I wanted the 13th Floor Elevators to come before AC/DC, not after ZZ Top on itunes and my ipod and stuff. Is there a way to make that happen? On the old version of itunes it was automatically like that, but they changed it.
Also, would this work on songs and albums too?

You can adjust how iTUnes sorts albums by editing the sort fields for the affected albums.

LabVIEW 2010 App Builder: Registry editor has issue with keys of the same name at the same level in registry tree

This is a bug report for an NI application engineer. Please file a CAR.
In a LabVIEW 2010 project, create a new installer build and go to the Registry editor.
Enter some keys like the following
Click OK to close the installer wizard.
Now reopen the build specification and go to the Registry editor. The registry editor comes up blank and non functional.
I believe the registry entries are still written when the installer executes, but you cannot edit the registry any further in LabVIEW 2010. This was not an issue in LV 2009. The issue seems to stem from having two keys with the same name at the same level in the registry tree (in this case, the two "Test" keys).

Hi sensor_daniel,
This was reported to R&D (#305026) for further investigation.
Thanks for the feedback!
Have a great day,
Chris V
Applications Engineer
National Instruments

In address book, if I try to show first name before the last name, why do only a few names change?

Using address book on 10.7.2, when I go to "preferences" to change the display order between showing the "first name" before or after the last name, only about 25% of names will change. The rest all stay in the same order. Any ideas?

By default any outgoing email has the addresses saved in the Collected address book. You can turn this option off if you want.

Why is a number appended to the volume name on external hard drive, only in path?

Last week I replaced a failing external drive. Using Disk Utility I partitioned it into two volumes, named them CCC and Warehouse (Warehouse is the problem). I had never had any volumes named Warehouse previously. In Finder the name shows correctly, until I click "Get Info", where the name is shown as Warehouse 1. All of the files on Warehouse show their paths as /Volumes/Warehouse 1. I don't know when the " 1" was appended to the name, or how it happened. It's screwing up my applications that write to or from the volume, the path is wrong. When I'm in Warehouse's "Get Info" I try to change the name back to Warehouse, but it immediately goes back to Warehouse 1. I copied everything off the drive, repartioned using the same names, and still have the problem. I notice if I change the name to something totally different, like "Fish", I don't get that problem. I would prefer to keep the name Warehouse though, if possible.

I have noticed that the system can "hold onto" a drive name when there's a disconnect from the external volume.
Try this. Eject your external drive. Go into Terminal, and type
Cd /Volumes
Do you see a phantom "Warehouse" volume still there? If so, navigate into it, make sure there are no files you might want to keep (copy them elsewhere if so), then navigate out and use
sudo rm -rf /Volumes/Warehouse
See if that fixes it.
Matt

SMTP Subscription Subject Line Formatting Issue

We are trying to use SMTP to send messages to a Unix box. The subject
> line always comes out looking like Subject:
> =?utf-8?B?QWxlcnQ6IFdlYiBBcHBsaWNhdGlvbiAtIERlbHV4ZSBUZXN0IFdlYnNpdGUg
> V2ViIFdhdGNoZXIgUHJpb3JpdHk6IDEgU2V2ZXJpdHk6IDIgUmVzb2x1dGlvbiBzdGF0ZT
> ogTmV3?=
>
> This is how it looks coming out of SCOM so I assume most email
> recipients
> can translate accordingly as we have no problem with messages to
> Outlook
> clients, for example. However this is problematic for the Unix box and
> we are
> trying to adjust how these alerts are sent, at least for this
> particular
> subscription. I have adjusted the subscription properties by checking
> the box
> which says "generate subject line with no encoding....." and even
> changed
> encoding to ASCII with no change. I also tried similarly adjusting the
> global
> SMTP notifications with no change. I know this is how its coming out
> of SCOM
> because the subject line above is from a TCP/IP capture at the RMS
> server.
> Has anybody dealt with this and found a solution?
> Thanks!

What does the configuration of the notification look like? (check under Administration/Settings/General/Notification)
Ours looks like this and behaves OK:
Alert: $Data/Context/DataItem/AlertName$ Priority: $Data/Context/DataItem/Priority$ Severity: $Data/Context/DataItem/Severity$ Resolution state: $Data/Context/DataItem/ResolutionStateName$
There's also a checkbox underneath that labeled "Generate subject line with no encoding..." - is that checked?"Fear disturbs your concentration"

Street line (name, number) formating error

Hello everyone,
I have an issue regarding formatting of the street line - when I include an address field (say in Smartforms), the street number comes before the street name. This would be according to USA standards, but I need it to be formatted by the EU standards (street name, and then the number). Also, where ever we have an address attached (SU01, customer/vendor master recs, purchase orders, etc) we get the same issue.
So, now it is: "1234 MyStreetName", but I need it to come as "MyStreetName 1234".
I have tried SA10, SA09, OY01 (and all the other customizing I could find), none of which had worked. The strange thing is that in our IDES system, it is displayed as it should be (name - number).
I can't find where this is preconfigured in IDES, so if anyone can suggest I would be very gratefull.
Best regards,
SD.

Hi,
Yes, that's correct. My colleagues and I had developed a bunch of Smartforms, and all of them are using the Address window to print the address.
I know I could print each address field manually using ADRC/ADRP tables, but I'd like to avoid that, if possible..
SD.
EDIT ***
Before this becomes missleading, I'd like to clarify: This is not a form printing issue! The wrong printout is only the consequence of the wrong setting. I need to find the cause, rather than work around the consequences.
This was previously posted in Basis Administration forum, but I was redirected here. Nevertheless, I am convinced that this is NOT an ABAP question, but rather an issue directly connected with the administration settings of SAP Netweaver AS. Anyway, now it's here...
Edited by: Srdjan Danicic on Nov 2, 2008 5:21 PM

How do I enter the serial number in lightroom before the trial is up?

I'm trying to enter the serial number in the program that I downloaded from the trail version. How do I find where I can put the serial number in before the trial is up?

...and I thought it was an option each time you launched the programme but it's been a while since I had a trial version.
If neither John or I are correct then it's possible that you've downloaded the CC trial version by mistake....you can't enter a serial number into that version and will need to uninstall it and then download the standalone version (fear not if it comes to that you'll not lose any work).

Drop an "out of contract" line from family plan, but keep the number

I have a family plan with 4 numbers. One of the numbers (let's call it line#1) is out of contract, so I can drop it without penalty. However, this is my daughter's number and I really don't want it to change. Another of the numbers (line#2) is still under contract, but it is a phone number I don't need any more. Verizon will not let me "swap" these numbers and keep line#1 while dropping line#2 -- unless I pay the termination fee on line#2. So, I'm wondering if this will work:
1. Port line#1 TO Google Voice (paying $20 to do so). This will cancel the Verizon contract for line#1.
2. Activate my daughter's phone with line#2, and configure GV to forward calls/texts from line#1 to line#2.
3. Wait a few days for things to stabilize.
4. Port line#1 FROM Google Voice back TO Verizon, replacing the line#2 phone number.
At the end of this process, I will have effectively dropped the Verizon contract for line #1, have line#1 take over the contract formerly owned by line#2, and removed line#2 from my Verizon account. This is exactly what I explained to 3 different Verizon people, both over the phone and in a store -- and they claim that they can't do it because "the phone number is tied to the contract". They won't let me "swap" or "port" a number within my account, but they will let me replace the phone number on a currently active contract with an external number that gets ported in to Verizon. So, I need to port line#1 OUT of Verizon (paying Google $20 to do this) and then turn around and port it back IN to Verizon, replacing the line#2 phone number I no longer need. I don't see a reason why this will not work, unless Verizon has some self-serving rule about not porting in a number that was recently ported out. (Is there a "waiting period" involved here?) It's idiotic to me that Verizon would rather have me give $20 to Google to port a number out and back in rather than allow me to swap phone numbers on my Verizon account.
Any thoughts?

Thanks, 21stNow and Brian68.
Understood. I use Google Voice as my primary number now, but my daughter would prefer not to mess with it. She wants HER number (line#1) to show up on outgoing calls/texts using the native dialer/messaging apps. She has an iPhone, and I'm an Android guy, so I don't know how well GV integrates with the iPhone's native dialer/messaging apps. (On my Android, my GV number shows up on outgoing calls from the native dialer by choosing to "Use Google Voice to make all calls" in the GV app. I suspect this would be the same on the iPhone. However, texts sent using the native messaging app (not GV) come from my actual cell number -- even if I change the "Callback" number to my GV number.) I suppose I could train her to use GV for messaging, but GV does not handle MMS or group texts -- it just ignores them! I don't care about this, but my 20 year old daughter does!
Regarding being unable to port the number back into Verizon, is this a restriction because it is a former Verizon number? As I understand it, I can log into MyVerizon and choose to "Change Mobile Number" on one of my active contracted lines. There is an option to port in a number to replace the number currently on that line. Other threads suggest that porting from Google Voice works the same as a landline port. Has anyone tried this and had success/failure?

Final Cut Pro to Final Cut Express -- Format issues?

Hi,
I'm shooting a project on a Panasonic HVX-200A, and my cameraman is going to import the footage to his Final Cut Pro station. He's then going to transfer the FCP footage and data over to an external hard drive, which I am going to use to edit the film using Final Cut Express.
Will there be any formatting issues if I bring the data from Final Cut Pro to Final Cut Express?
Thanks!!
Sameer Ketkar

Clip files can be easily imported into FCE if they are QuickTime DV-NTSC/DV-PAL or Apple Intermediate Codec (720p30, 1080i50/60). If they are other formats/codecs they should be converted to DV or AIC before importing into FCE.
FCPro project files cannot be imported into FCExpress.
I'd suggest a trial run before committing the project to this workflow.

Arbitrary Number Generated before Sales Order Document number is Generated

I want to know which is the arbitrary number generated before the sales Order Document number is created. In which table the arbitrary number is stored?
The Exit which triggers the arbitrary number in the transaction VA01?

Hi
You get the Arbitrary number throug the FM NUMBER_GET_NEXT.
interne Nummernvergabe
        data: da_rc like inri-returncode.
        call function 'NUMBER_GET_NEXT'
          exporting
            nr_range_nr = da_numki
            object      = 'RV_BELEG'
          importing
            returncode = da_rc
            number      = vbak-vbeln.
And regarding userexit, there is
perform userexit_number_range using da_numki statement in include MV45AF0B_BELEG_SICHERN.
Regards
Raj

How does Magnum do the street scene? Experts disagree

I am trying to figure out how http://pleasurehunt2.mymagnum.com created the street scene?
This street in Flash
*loads quick
*excellent detail
*can use arrows to control
How did they do this?
1. 3ds max, pretender the path- create a video, then bring into flash ?
or
2. some kind of 3D engine written with actionscript that has bitmap images mapped to 3D planes
or
3. a 2.5d creation?
Or
4. Real 3d?
You will notice this scene the girl actually moves without the arrows, forward-
I want to move the "character" with arrows, and also click on hotspots

Look at their traffic. There are no 3d engines involved. Everything is videos played in certain sequence with strategically positioned overlays and transitional graphics.
Here is the list of all videos:
http://pleasurehunt2.mymagnum.com/assets/components/bingmaps/cs02_NY_intro_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/newyorkrun/NEW_YORK_MAIN_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/cutscenevespa/cs03a_b_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/parisrun/PARIS_MAIN_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/cutscenebulgari/04a_low.flv;
http://pleasurehunt2.mymagnum.com/assets/components/cutsceneballoons/cs05_billboard_low.f4 v;
http://pleasurehunt2.mymagnum.com/assets/components/riorun_1/RIO_MAIN_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/cutscenefasanos/cs06a_comp_v007_720p_l ow.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/cutscenefasanos/cs06b_comp_v006_720p_l ow.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/riorun_2/RIO_MAIN_2_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/cutscenesurf/cs07_surfer_low.f4v;
http://pleasurehunt2.mymagnum.com/assets/components/results/INFINITY_SWIRL_FINAL_loop_star t_low.flv;
http://pleasurehunt2.mymagnum.com/assets/components/results/INFINITY_SWIRL_FINAL_low.flv;
http://pleasurehunt2.mymagnum.com/assets/components/results/INFINITY_SWIRL_FINAL_loop_low. flv;

Street line formating issue (number comes before the street name)

Similar Messages

Maybe you are looking for