STRESS AND LOAD TOOLS FOR JSF & SPRING APPLICATIONS

Hi,
I am looking for tools
I have a web application based on JSF and Spring framework.
� want to test performans(load and stress) of my application.
Which tools are available ?
thanks.

Try JMeter and Selen.

Similar Messages

  • Performance and Load testing for Agentry applications in SMP2.3

    Hello Experts,
    We have a requirement to carry out the Performance and Load testing for our SAP Work Manager application (SMP2.3).
    Please guide me if ATE (Agentry Test environment) /  Jmeter / or any other testing tool can be utilized for the same.
    Would be great if you could provide me the steps / references for the same.
    Thanks,
    Abhishek

    Hi Abhishek,
    Please refer this document Agentry - Assets for Admins & Architects. It has very good content which explains about performance testing and performance tuning.
    Rgrds,
    Jitendra

  • I am looking for a load testing tool for my flex application

    I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.

    Do you have iPad 1 or 2?
    You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
    You can connect iPad 2 via VGA or HDMI.
    I like Epson or Sony for projectors.

  • BI stress and load testing

    Hi all,
    I am looking for Scenarios in BW/BI related to stress and load testing, does anyone worked on this area? I am looking for a scenario and what are the 3 rd party tools required for this?
    any documents ..plz help me ..its urgent
    Thanks in advance

    Hi,
    Not too sure if Mercury LoadRunner is the solution you're looking for.
    www.mercury.com/us/products/performance-center/loadrunner/
    http://www.sap.com/usa/solutions/solutionextensions/pdf/BWP_LoadRunner.pdf
    I think one of the solution is to check with your SAP accounts manager and ask if he/she has solution to offer.  The last time we did a stress test (2 years ago) was to co-ordinate groups of users to refresh multiple massive queries...
    Hope this helps.
    Cheers,
    Gimmo

  • Stress and load testing

    Hi all,
    How do you do the stress and load testing on queries( WAD) in BW, does mercury loadrunner supports this?  I am little bit confused with the portal and BW, where i hv to do stress and load testing of Web queries( i views)? plz help me

    Stress and Load testing are the different types of testing used to test the Application in Development by increasing the loads on the application in order to test the applications behavior as to how it would react with the increased loads. Example in testing a website we constantly increase the number of users accessing that website at the same time in order to check how much of response time is the web page taking to show up on the screen, how is the back end of the website working and at a time how many users can log on before the website crashes.
    Let me know if this is of any help  and assign points if helpful. Sorry for the delayed reply.
    Thanks,
    Reena

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • How to Generate 250 Users Conference using Lync 2013 Stress and Performance Tool

    How to Generate 250 Users N-way IM Conference using Lync 2013 Stress and Performance Tool.
    Please Let know the configurations to generate the XMLs. We are not able to create more than 70 users N-way IM conference though during configuration, we opted for 300 users conference for Large Conference (in custom setting).
    The tool somehow does not create the number of participants as indicated. Is there any way to troubleshoot why it's not generating the expected load.

    Hi,
    Would you please elaborate more about your Lync environment?
    Please check if you meet the following configuration requirements:
    Set the MaxMeetingSize option to 1000. (The default is 250.)
    Set the AllowLargeMeetings option to True.
    Set the EnableAppDesktopSharing option to None.
    Set the AllowUserToScheduleMeetingsWithAppSharing option to False.
    Set the AllowSharedNotes option to False.
    Set the AllowAnnotations option to False.
    Set the DisablePowerPointAnnotations option to True.
    Set the AllowMultiview option to False.
    Set the EnableMultiviewJoin option to False.
    More details:
    http://technet.microsoft.com/en-us/library/jj205074.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 Stress and performance tool - VoIP calls

    I want to test only VoIP calls using the Stress and Performance tool.  Does the tool make real SIP calls to the Front End server?  It seems like its only simulating a VoIP connection and not doing a real SIP call --I don't see the SIP SDP setup
    or RTP media stream.  Please confirm this. 
    I configured the Load Configuration Tool ( UserProfileGenerator.exe ) to only use VoIP and configured for Load Level: medium.  I only see between 2 and 4 Voip calls in progress at any given time.  How can I increase the calls to 50+ simultaneous
    calls? 
    For the UC/PSTN Gateway test, it says I need to run this on 2 clients.  How does this work?  I ran the RoutingRules.ps1 script, and it changed the voice routes and broke the current routing.  This is a lab setup, so I'm only setup with
    4 digit dialing between all clients and an Asterisk trunk.  It doesn't seem like this will work unless I change to E.164 numbers for everything.  Can someone share more information on configuring this? 
    Thanks,
    Jeff

    The tools can only create users, contacts, and distribution lists, and simulate user load.
    Please check the Number of Users you specified in Common Configuration, you can check
    http://technet.microsoft.com/en-us/library/gg679085(v=ocs.14).aspx
    Lisa Zheng
    TechNet Community Support

  • Data Warehouse and ETL tools for data verification ?

    Data Warehouse and ETL tools for data verification ?
    How need to to data verification using ETL tool ? Also how to relate this thing to datawaehouse ?
    Thanks in Advance

    Hi  Shyamal Kumar,
    1)  BW it self  facilitates to do the ETL (Extraction Transformation Loading)  steps:
         example:
                     Extraction  - from SAP or other data bases
                     Transformation - using transfer rules, Updates rules
                     Loading  -  Loading into ODS, Cube, master data
    2) Typically used ETL tools in the industry are:
         a)   datastage from Ascential (owned by IBM)
         b)   Informatica
         c)   Mercator
    Regards, BB

  • Can I get from iConnect financijal and statistic report for single Newsstand application ?

    I have problem to get full financial and statistic report for one single application?
    Is there a posibilty thay kind of report doesn/t exist?
    I can't belive...!

    Welcome to AppleWorks, a discontinued application. I'll try to get you to the iPad forum.

  • HT1222 My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    Hi,
    Try this ... reboot your Mac and see if double clicking works again.
    Also, you can just select the Application you like to open and hold down the Command+O to open.
    Also, did you check your setting for the mouse in system preferences.
    Dimaxum

  • Collection : Popular DVD and Video Tools (For Mac)

    Collection : Popular DVD and Video Tools (For Mac)
    iPod softwares http://www.oursdownload.com/Mac-DVD-Video-iPod.html
    iPhone softwares http://www.oursdownload.com/Mac-DVD-Video-iPhone.html
    PSP softwares http://www.oursdownload.com/Mac-DVD-Video-PSP.html
    Apple TV softwares http://www.oursdownload.com/Mac-DVD-Video-Apple-tv.html
    DVD to Mobile(3GP) softwares http://www.oursdownload.com/Mac-DVD-3GP.html
    DVD Video to MP4 softwares http://www.oursdownload.com/Mac-DVD-Video-MP4.html
    DVD Converter http://www.oursdownload.com/Mac-DVD-Converter.html
    Video Converter http://www.oursdownload.com/Mac-Video-Converter.html
    DVD Copy softwares http://www.oursdownload.com/Mac-DVD-Copy.html
    DVD ripper softwares http://www.oursdownload.com/Mac-DVD-Ripper.html
    DVD to Blackberry http://www.oursdownload.com/Mac-DVD-Blackberry.html
    DVD Creator http://www.oursdownload.com/Mac-DVD-Creator.html
    DVD Studio Pack http://www.oursdownload.com/Mac-DVD-Studio.html

    I addition to running less concurrent processes or installing more RAM as Kappy mentioned.
    I also see that you have less than 10% of free space left on your HDD.
    Disk Information: ?
      ST3500418AS disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 499.25 GB (40.6 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    Which is fairly low and forcing it to work on the slowest part of the HDDs platter.

  • How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

    how to check the usage of ram and cpu  Performance for the particular application like sqlserver ,ms word
    ranki

    Hi,
    You can use Performance Monitor and add the required counters.
    Check the below Technet article on Performance Monitor.
    http://technet.microsoft.com/en-us/library/cc749249.aspx
    Below are the steps to monitor the process in Performance Monitor.
    - Go to the Performance Monitor. 
    - Right-click on the graph and select "Add Counters".
    - In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
    - In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
    Regards,
    Jack
    www.jijitechnologies.com

  • Backpac: A package state snapshot and restore tool for Arch Linux

    backpac:
    A package state snapshot and restore tool for Arch Linux with config file save/restore support.
    https://aur.archlinux.org/packages.php?ID=52957
    https://github.com/altercation/backpac (see readme on the github repository for more information)
    Summary & Features
    It's a common method of setting up a single system: take some notes about what packages you've installed, what files you've modified.
    Backpac creates those notes for you and helps back up important configuration files. Specifically, backpac does the following:
    maintains a list of installed groups (based on 80% of group packages being installed)
    maintains a list of packages (including official and aur packages, listed separately)
    maintains a list of files (manually created)
    backs up key config files as detailed in the files list you create
    The package, group and files lists along with the snapshot config files allows system state to be easily committed to version control such as git.
    Backpac can also use these lists to install packages and files. Essentially, then, backpac takes a snapshot of your system and can recreate that state from the files and lists it archives.
    Use Cases
    Ongoing system state backup to github
    Quick install of new system from existing backpac config
    Conform current system to given state in backpac config
    Backpac is a very, very lightweight way of saving and restoring system state.
    It's not intended for rolling out and maintaining multiple similar systems, it's designed to assist individual users in the maintainance of their own Arch Linux box.
    Status
    Alpha, release for testing among those interested. Passing all tests right now but will continue to rework and refine. Bug reports needed.
    Why?
    There are a lot of 'big-iron' solutions to maintaining, backing up and restoring system state. Setting these up for a single system or a handful of personal systems has always seemed like overkill.
    There are also some existing pacman list making utilities around, but most of them seem to list either all packages or don't separate the official and aur packages the way I wanted. Some detect group install state, some don't. I wanted all these features in backpac.
    Finally, whatever tool I use, I'd like it to be simple (c.f. the Arch Way). Lists that are produced should be human readable, human maintainable and not different from what I'm using in non-automated form. Backpac fulfills these requirements.
    Regarding files, I wanted to be able to backup arbitrary system files to a git repository. Tools like etckeeper are interesting but non /etc files in that case aren't backed up (without some link trickery) and there isn't any automatic integration with pacman, so there is no current advantage to using a tool like that. I also like making an explicit list of files to snapshot.
    Sample Output
    This is the command line report. Additionally, backpac saves this information to the backpac groups, packages and files lists and the files snapshot directory.
    $ backpac -Qf
    backpac
    (-b) Backups ON; Files will be saved in place with backup suffix.
    -f Force mode ON; No prompts presented (CAUTION).
    (-F) Full Force mode OFF; Prompt displayed before script runs.
    (-g) Suppress group check OFF; Groups will be checked for currency.
    (-h) Display option and usage summary.
    (-p) Default backpac: /home/es/.config/backpac/tau.
    -Q Simple Query ON; Report shown; no changes made to system.
    (-R) Auto-Remove OFF; Remove/Uninstall action default to NO.
    (-S) System update OFF; No system files will be updated.
    (-U) backpac config update OFF; backpac files will not be updated.
    Sourcing from backpac config directory: /home/es/.config/backpac/tau
    Initializing.................Done
    GROUPS
    ============================================================================
    /home/es/.config/backpac/tau/groups
    GROUPS UP TO DATE: group listed in backpac and >80% local install:
    base base-devel xfce4 xorg xorg-apps xorg-drivers xorg-fonts
    GROUP PACKAGES; MISSING?: group member packages not installed:
    (base: nano)
    (xfce4: thunar xfdesktop)
    PACKAGES
    ============================================================================
    /home/es/.config/backpac/tau/packages
    PACKAGES UP TO DATE: packages listed in backpac also installed on system:
    acpi acpid acpitool aif alsa-utils augeas cowsay cpufrequtils curl dialog
    firefox gamin git ifplugd iw mesa mesa-demos mutt netcfg openssh rfkill
    rsync rxvt-unicode sudo terminus-font vim wpa_actiond wpa_supplicant_gui
    xmobar xorg-server-utils xorg-twm xorg-utils xorg-xclock xorg-xinit xterm
    yacpi yajl youtube-dl zsh
    AUR UP TO DATE: aur packages listed in backpac also installed on system:
    flashplugin-beta freetype2-git-infinality git-annex haskell-json
    package-query-git packer wpa_auto xmonad-contrib-darcs xmonad-darcs
    AUR NOT IN backpac: installed aur packages not listed in backpac config:
    yaourt-git
    FILES
    ============================================================================
    /home/es/.config/backpac/tau/files
    MATCHES ON SYSTEM/CONFIG:
    /boot/grub/menu.lst
    /etc/acpi/handler.sh
    /etc/rc.conf
    /etc/rc.local

    firecat53 wrote:I think your plan for handling an AUR_HELPER is good. If AUR_HELPER is defined by the user, then either you might need a list of major AUR helpers and their command line switches so you can pick the correct switch for what needs to be done (most use some variation of -S for installing, but not all), or have the user define the correct switch(es) somehow for their chosen AUR helper.
    That's a good idea. I'll add that to my AUR refactoring todo.
    I also found directory tracking to be a weakness in other dotfile managers that I tried. I think you would definitely have to recursively list out the contents of a tracked directory and deal with each file individually. Wildcard support would be nice...I just haven't personally found a use case for it yet.
    I've been thinking that I could just add the directory and scan through it for any non-default attribute files. If those are found then they get automatically added to the files list. That's pretty close to what etckeeper does.
    Edit: I just compiled the dev version and removed my comments for already fixed things...sorry!
    The master branch should have those fixes as well, but I didn't update the version number in the package build. I'll have to do that.
    1. Still apparently didn't handle the escaped space for this item: (the file does exist on my system)
    Ok, good to know. This wildcard directory business will require some new code and refactoring so I'll also rework my filenames handling.
    2. Suggestion: you should make that awesome README into a man page!
    I was working on one (the pkgbuild has a commented out line for the man page) but I had to leave it for later. Definitely want a man page. Once this stabilizes and I'm sure there aren't any big structural changes, I'll convert it to man format.
    3. Suggestion: add the word 'dotfile' into your description somewhere on this page, the github page, and in the package description so people looking for dotfile managers will find it. You could also consider modularizing the script into a dotfile manager and the package manager, so people on other distros could take advantage of your dotfile management scheme.
    I actually have a different script for dotfile management that doesn't touch packages, but there is definitely overlap with this one. That script isn't released yet, though, and if people find this useful for dotfile management that's great. I'll add that in.
    4. Suggestion: since -Q is a read-only operation, why not just make it run with -f automatically to avoid the prompt?
    Originally, running backpac without any command line options produced the Query output. I was concerned that since it is a utility that can potentially overwrite system files, it is important to give users a clear statement prior to execution about what will be done. Since the Query output is essentially the same as the Update and System reports in format and content, I wanted to be explicit about the Query being a passive no-change operation. The current command line options aren't set in stone though. If you feel strongly about it being different, let me know.
    Long answer to a short question
    5. Another suggestion: any thought to providing some sort of 'scrub' function to remove private information from the stored files if desired? This would be cool for publishing public dotfiles to github. Perhaps a credentials file (I did this with python for my own configs). Probably detecting email addresses and passwords without a scrub file would be rather difficult because dotfiles come in so many flavors.
    Yes, absolutely. In fact, if you look at the lib/local file (pretty sure it's in both master and dev branches in this state) you'll see some references to a sanitize function. The idea there is that the user will list out bash associative arrays like this:
    SANITIZE_WPA_=(
    [FILE]='/etc/wpa_supplicant.conf'
    [CMD]='sed s/expungepattern/sanitizedoutput/g'
    Question: am I missing an obvious option to remove a file from the files.d directory if I delete it from the files list? Or do I have to delete it manually? It might be helpful to add a section to the README on how to update and delete dotfiles from being tracked, and also a more detailed description of what the -b option does (and what is actually created when it's not used).
    You are only missing the function I didn't finish. There should be either dummy code or a TODO in the backpac main script referencing garbage collection, which isn't difficult but I just haven't finished it. The idea being another loop of "hey I found these old files in your files.d, mind if I delete them?" It's on my list and I'll try to get it in asap.
    And finally, just out of curiosity, why did you choose to actually copy the files instead of symlink like so many other dotfile managers do?
    git not following symlinks, hardlinks also out for permissions issues (git wouldn't be able to read the files, change them, etc.)
    I definitely would prefer to not make an entire copy of the file, but I haven't come up with a better option. Shout with ideas, though. Also, if there is a way around the link issues I noted above, let me know. I don't see one but that doesn't mean it's not there.
    edit: I think a Seattle area Arch meetup would be cool! Perhaps coffee someplace? Bellevue? U-district? Anyone else? BYOPOL (bring your own pimped out laptop)
    A general meetup sounds good. I was also thinking it would be fun to do a mini archcon with some demos.

  • Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application

    Hi Expert,
    I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
    My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
    Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
    I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
    Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
    I would know if the NGINX must be used also for SMP 2.3.
    Any suggestion/information is appreciated.
    Thanks in advance
    g.

    Please see Agentry Network Landscapes

Maybe you are looking for