Stretching space around photo
I took a photo and got all the objects I wanted in it, but I would like to have a little more space around the photo, not a white border, just a little more space around the objects. Is there any way I can add more space around the photo just in case I want to crop it to different sizes?
Use the Recompose tool:
Image...Resize...Canvas to increase the canvas size. I used 130% for both horizontal and vertical.
With the Recompose tool, mark the areas to keep as is and the areas to use for the expansion:
Drag the sides of the image to enlarge it:
You'll get distortion where the image was expanded, but, depending on your original image and the amount of expansion, it should be acceptable. You can always use the Clone tool to touch up.
Ken
Similar Messages
-
Adjusting space around "textwrap' after opening PM7 file in InDesign
Love PageMaker as it suits my basic needs, but printer needs Indesign file. In PageMaker 7, I have numerous photos with captions (67). The photo and caption have been textwrapped together. When I open the file in InDesign 4, both the caption and photo have "frames," but there is a solid red frame around both of them (what would be close to the textwrap size in PageMaker 7). This solid red frame is larger than the original textwrap frame in PM7 and therefore throwing out of line the rest of the material (non-textwrapped) in my file. I don't know how to make this solid red frame smaller. This is the only problem I have when I open my file in InDesign. Unfortunately nothing I am reading seems to point me in the right direction. I would so greatly appreciate any help. Will send box of candy!! Thanks. Elkie2
Mike (and Bob and Peter),
"first post says this is a red frame, post #3 says red line. They are adjusted differently and easily. Strokes on frames need adjusted separately from the frame size."
Didn't mean to say "red line" (strokes). If I can't explain the problem correctly, what hope is there for me. One more try. There is one red frame with handles which surrounds the photo with its caption. The handles would allow me to change the frame size which I don't want to do, as I don't want to change the size of the photo. There is another red frame without handles around this frame. This frame, without the handles, is the one that has too much space around it (top, bottom and sides). Since it has no handles, there is no way to adjust its size. Hope this might make more sense, if someone still wants to try to respond.
(Will look a pdf issues also - thanks for words on it). -
How do I clean up mail in my icloud? I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room). When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room. Is there a way to actually log on to the icloud server to manage what it stored there? If so, how do I do it? Also, on a related subject, why does my mail not sync accross all devices? ie. when I delete an email on one device, why do I still see it on all my other devices? How can I change this?
I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem? Looking to upgrade to a Mac sometime this year...
Thank-you for the help!beckyfromoz wrote:
I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday. They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule -
How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)? I can sync with iTunes but it doesn't copy these songs back, even though they still appear in my iTunes library. I can click on the Music link under 'On My Device' in iTunes and the missing songs all appear to still be on the device, but they are not. I normally delete using iTunes and do not have this issue. This time I was out and needed more space to shoot photos and videos so I removed a lot of music from my phone through the Music App.
The songs I'm trying to reload on my phone are on my PC. These we had loaded into iTunes. I can remove them all from the library and then add them all back one by one I imagine. The problem I'm having is that I removed them manually from the phone, they still appear in iTunes music library yet they won't sync. I don't want to take the time to compare the phone to my library, remove from the library what's missing on the phone and then add them all back again. 64GB (mostly music) will take a while.
-
How can I find out how much space my photo library is taking up on my hard drive?
How can I find out how much space my photo library is taking up on my hard drive?
Lizz Holmes wrote:
How can I find out how much space my photo library is taking up on my hard drive?
Locate iPhoto Library (the default location is <~/Documents/Pictures/iPhoto Library>), select it, and choose File > Get Info. -
I am following the instructions regarding margins but whilst having lots of space on the right it remains very tight on the left. It's supposed to make the same amount of space all around the text??
Any ideas?In the text inspector insert a margin last tick in the window after the paragraph adjustments.
Even if you don't use bullets you can also do some adjusment under that tab as far as space around text in the window.
As much as possible control your text with the sliders space before paragraph space after line spacing rather than extra characters as it is a much cleaner formating and when you make changes you won't have to remove any of those extras.
I was a print designer in another life, but text formating is text formating no matter where it is.
Mireille -
Template with php script, white space around background, locking layers
two questions for 2 sites:
1.) first site http://www.beckervanhoveln.com
I can't get my background to line up correctly; there is a giant white border around the whole thing. With the amount of extra space around the background on all sides, I think it may be an issue with the illustrator file I am importing, but I can't see any way to fix it there, either. All the margins that I can find to change relating to that background are set to 0. Any ideas on what could be causing this? The image in Illustrator is 14" wide, so it's plenty wide enough to cover the whole page.
2.) site http://sai.theclothesgallery.com
I inserted php scripts into a page (in the editable paragraph region) and it is messing up the alignment of the page. Compare what you get on the home page with what you get when you click the "client login" button. Also, wondering where the extra body area came from on page http://sai.theclothesgallery.com/protected_downloads_zdr/validuser.php.
On both sites I am using wrapper and body tags, as directed in the tutorial by Nate (great one, thanks!). On my old site, http://www.theclothesgallery.com, everything works fine, but on the new ones I am just out of my mind. I've spent 10 hours over the last 2 days doing research and trying to manipulate code, to no avail. Thanks to anyone who can help.
Finally, is there a way to lock a layer inside or on top of another layer. for example, the layer the body text is in on site http://sai.theclothesgallery.com is on top of the layer that holds the page's images (which is an imported illustrator file with slices). Is there a way to lock that layer to the first one so it doesn't move if I make changes?Kelly,
1. The image itself has a white border. You will need to crop that image
in an image editor such as Photoshop.
2. Looking at the source of the page you have two sections and
two opening toags but only one closingtag. The PHP
script is probably creating the additional sections, but without seeing
the script it is impossible to say for certain.
2a. You probably have a space or blank line before the opening -
What is causing white lines around photos in Muse?
Some of my photos are showing up on the preview with thin white lines at the bottom or side. Lines don't show up in the originals in design. Also checked box for no stroke around photo? Any ideas how to remove it?
As soon as you flatten do you see the problem in Illustrator, or after you make a .pdf?
Is that a soft drop shadow on the S, what happens if you temporarily remove the shadow?
What setting do you have for document setup >> transparency? Do you have any blending modes assigned?
So you have both CS6 & CC, did this happen before the cash cow was installed? I would say so turn off smoothing in Acrobat as in my initial screenshot, but you say that this happens even in other non pdf formats. Try resetting your preferences, this looks like a tranparency flattening issue. -
How to modify default Space Around Component in NetBeans 6.0?
Hi,
Does anybody know how to modify the default Space Around Component in NetBeans 6.0? I use Panel and either they stick completely to the border or stand too far. I can't find any options to modify this in NetBeans 6.0. I have tried using the 'Space Around Component...' functionality, but as soon as I move an element, NetBeans automatically replaces the values I have entered with default values I am not interested in.
Does anyone have the solution?
Thanks!I think you just have to move the component holding the alt key... that way you can put the components wherever you want to..... it was alt, or shift, or another special key, try it... i don�t remember right now
-
I'm new to Numbers and need to print a table I have devised. But there is too much space around it. When I enlarge the columns and rows, it splits into 2 pages. How do I get rid of the large gaps around the sides?
wa,
The gaps around the sides are margins. The sizes of the margins are set in the Sheet Inspector. There are minimum margins, based upon what your printer driver has communicated to Numbers, where your printer is unable to print.
Your table will split and flow onto multiple pages whenever it encroaches upon the margins. You can prevent this by not making the rows and columns quite so large, and by eliminating any unneeded ones.
Jerry -
Removing White Space Around Header - from CSS?
What is causing the white space around the header and
above/below the top nav bar? There's also an extra white pixel
space between each of the buttons on the top nav bar.
See;
http://home.roadrunner.com/~phenline/products/prods_models_9_10_07.html
I've also attached the CSS stylesheet.
I thought it might be a valign tag but they are all in the
main text and are necessary to glue the 3 main sections just under
the top nav bar. I couldn't find any vspace or hspace options in
the code.
Because of the rollovers on the top blue horizontal nav bar,
I need the "class" option in each <td> tag. Otherwise, if I
put the class="navMain" option on the <tr> tag, then the
whole nav bar will show the rollover color. Or, I suppose I could
create 5 different CSS styles for each nav button ???
Any ideas? Thank you.HI, for first you should to revrite tables to DIV, or you can
correct this with a CSS code for the table:
for example you shold to check the background color to the
same:
.x {
background-color: #3766c8;
for more example about Table CSS styling you can check a good
wizard:
http://www.somacon.com/p141.php
Titti
http://textures.z7server.com/ -
QR code occupying more space around the barcode
Hi,
I am creating a new form with 7 barcodes of type Paper forms Barcode(QR code). I have two problem in this...
1) I am giving the same width and height for all the barcodes. But in the final output the size differes for all. two are of one size, other two are of other size and other 3 are of different size.
2) And for the QR code it is taking more space around the barcode where the form is looking odd with more empty space?
So, How to make all the barcodes of same size?Hi All,
Frequently we are facing the issue with memory dump files which will creating space issue on the drive...
Each dump file occupying around 100 or 200 MB and it will creating every 1 mint..
please let us know how to resolve the issue.
Thanks,
Subbu
Thanks, Subbu
Hello,
As per me memory dumps are generated when fatal error occurs.
How to avoid it ? See below
1. Please apply latest Service pack as well as cumulative update .If you still receive this dumps please open a case with Microsoft and allow them to analyze the dumps
2. Generally a SQL server not patched to latest SP or CU can cause this issue.
Hope this helps
Out of curiosity..can you post one of the dumps ,what is output of below query
select @@version
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Videos Come Out Small with Black Space Around-Nikon coolpix L820
Everytime I export a video from premiere pro it comes out small with black space around the edges-- like this: Above All Odds, Bobby Maze: Episode 1 - YouTube
How would you suggest I fix this within the settings and how I export it?Hi,
What is the Frame size of the Video?
In the Project Bin, right click on the File and create a New Sequence from Clip.
Export the File in the same Frame size as you video.
Thank You
Arjun -
Hello,
I am embedding videos into an HTML page and they show up with
a big white space around the player. Is there a way I can get rid
of this white space so the videos are neatly contained in only the
space of the actual video and controls?
Thanks
FionaCan u show hoe you have embeded your code?
this may happen due to incorrect size. Please check the Flash
Width and height and your HTML tag -
Is there any way to get rid of the white space around an image. A lasso?
Do you mean the wide gutter? The default for all graphics inserted or dragged & dropped into a Pages document is 12 points. You can use the wrap inspector to either turn off the wrap or decrease the gutter?
If you want to make the background transparent, take a look at a recent thread starting here.
Maybe you are looking for
-
Is there a way to transfer music from one Apple ID to another?
When I got my first Ipod several years ago my parents created an Apple ID, or whatever it was called back then, so I could download music. This is where about 90% of my music was downloaded from. When I got my Iphone 4S just over a year ago I creat
-
Bsi mapping in seeburger adapter
hi experts, i want to know about bic mapping in idoc to edi scenarios in which i am using seeburger adapter.please help me and provide me some documentation.
-
Difference between Session Facade and Business Delegate design patterns
Can someone tell me the differences between Session Facade and Business Delegate design patterns
-
Workforce planning data not getting copied into the CATs
Dear all, I am doing the activity confirmation in the project by transferring the data from CATs. However in order to maintain the data in CAT2 we have to copy the data from workforce planning. currently it is not happening. The data is not getting c
-
Steps for discrete manufacturing in production planning module
hi, my all dear sir, i am consused about the steps of discrete manufacturing in pp module. so please give me solution thank you sir