Stretching type while on a circular path?

I'm wrking with a typeface that I need to stretch horizontally while following a circular shape. I don't want to distort it other than the horizontal stretching. Is there any way to do this?
Oh and in Illustrator

Katie,
If you wish to stretch it to a specific total length to match an arc that forms a certain part of the circle, you may:
1) Determine the length of the arc (you may cut (a copy of) the circle, or you may Add Anchor Points, where the lettering is to end, then (Direct Select and copy the segment and) see the arc length with the help of the Telegraphics PathLength filter or the Info palette (whichever can show it in your version);
2) Select a set of the live Type and see its length, or drag with the Line Tool from end to end of it, depending on how tight you want it, and see the Type length;
3) Apply a Horizontal Scale as shown by Larry, using a % value that is 100 times the arc length divided by the Type length;
4) With that Horizontal Scale, apply the Path Type Tool on the arc/circle.

Similar Messages

SAP REx 3.2 Predefined list of activities for visit type while creating visit on iPad

Colleagues, our customer wants to have a different predefined list of activities for different visit types while creating a visit on iPad. I have seen such functionality in SAP Demo for REx 3.2 on iPad. Could you tell me what I should do to have such functionality?

Hello Viktor,
There are no REx customisation available to mainatin the set of activities that can be assigned to a visit.
In the REx iPAD & iPhone solution, all the surveys, journals and activities are shown together as activities.
For example in the first screenshot provided by you, for the newly created visit the activities shown plannogram check, trade assets, store sales performance and promotion compliance are the surveys and journals assigned to the CRM transaction type of the REx visit Business Review. We can assign activities which are customised in the SPRO path mentioned by me in the previous post. In the device when we go to the details of the visits and activities then we can see that the surveys and journals assigned to these activities are grouped seperatly.
So if want only specific activities (in iPAD & iPhone surveys and journals are activities) to be available for a visit then we should set the CRM customisation for surveys and journals accordingly.
Regards
Pramod

Typing on a Circular Path in CS6

I've found lots of tutorials, but all of them leave me in the dust. Most seem to be for versions earlier than CS6, or they omit an important step or mention some function I can't find.
Anyway, can someone tell me what steps to follow in order to the following?:
I'm creating a state seal, with a blue band around the design. Inside the circular blue band, I'd like to type the words "Great Seal of" at the top and "Washington State" at the bottom. But I actually need two separate sets of text, because I don't want "Washington State" to be upside down.
Anyway, how do I do this?
Thanks.

Draw a circular path with the ellipse shape tool, hover your text tool over it - magic.
Mylenium

Assignment of notification type while doing results recording

We use a different quality notification while doing results recording.
It is taking a notification type different from what we want to make it defaulted.
Please advise the configuration steps for defaulting a QM notificaiton type , while doing resuolts recording for defects.
Thanks,
Manohar

Hi,
Quality notifications are created as part of defects recording and defect recording can be done during result recording of inspection lots. Defects are confirmed during inspections and recorded for specific inspection lots. Hence you need to assign a suitable quality notification type to each inspection type, for which defects are to be recorded.Menu path is :Quality Management>Quality notifications>Defects recording>Define notification type>Define notification type for Inspection type.
Note: You should use this inspection type to make sure that only one quality notification is created, even if defect records have been created for several operations.
regds,
atul

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

SQL types over PLSQL types while using Oracle Applications adapter in BPEL

Use SQL types over PL/SQL types while using Oracle Applications adapter
in BPEL/ ESB
This document will be focusing on Oracle Applications adapter. However Database adapter is much like OA adapter (even OA adapter uses DB Adapter), so the readers who are interested to explore DB adapters, can relate things with this document and go further as well.
Some Guidelines for writing PL/SQL APIs for OA Adapter
As we know when we create a partner link from the OA adapter wizard it sometimes writes some wrapper script supportive to the OA Adapter WSDL which contains below
* Object type for PL/SQL RECORD
* Nested table of the given type for PL/SQL TABLE. For example, the nested table of NUMBER.
* INTEGER substituted for PL/SQL BOOLEAN
* Wrapper Script for converting above three set of data types . (PLSQL to SQL and SQL to PLSQL conversion functions)
In runtime this wrapper script for converting PL/SQL to SQL and SQL to PL/SQL is an extra overhead.
So the first advice would be to avoid the use of the below as parameters of PLSQL API being called by OA Adapter.
* PL/SQL RECORD
* PL/SQL TABLE. For example, the nested table of NUMBER.
* PL/SQL BOOLEAN
In other way we can say we should try to use only SQL data types in arguments if we are planning to call any PL/SQL API from the OA Adapter.
If the requirement is to use a table or record uses the Object type. In place of BOOLEAN better to use VARCHAR or INTEGER what ever fulfills your requirement. Following this guideline we can reduce a huge number of Line of codes to be run each time the adapter being called.
Generally, Oracle E-Biz standard APIs use PL/SQL record types and table types so when there is a requirement to call these API’s from OA Adapter (this is a common requirement in development), and if we directly browse the API in OA Adapter Configuration Wizard and create the partner link, again a huge number of code is written by the wizard in the wrapper script (a number of extra mapping of fields which are not being used in the interface).
In this case better would be to create an Object type with only the required fields which are being used in that call and use them as parameters for the PLSQL API.

Find the complete document
http://www.4shared.com/file/167171882/29525116/Use_SQL_types_over_PLSQL_types.html

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

In the attached VI why does one loop coerce the data type while the other doesn't?

In the attached VI why does one loop coerce the data type while the other doesn't?
Solved!
Go to Solution.
Attachments:
AAA.vi ‏8 KB

I'm guessing you created the Enum on the front panel. If you right-click it and create an indicator, it will match the type, and be an enum. LabVIEW represents enums as U16, but because the types aren't identical (for example, your enum has 3 values, but a U16 has 65,536 values), LabVIEW automatically coerces (or converts) the smaller (enum) representation into the larger (U16) value.

Jpr adapter not showing in adapter type while creating communication channe

Hi all,
I got error in JPR adapter type.Due to that its displaying in adapter type while creating communication channel.I checked in RWB in communication channel monitoring its showing
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EXI.SystemHome.hexsap found
No access to get JPR configuration
How to solve this issue,
Regards
Vijay

Thanks guys for the response..
I checked the IR and the SAP Basis has been added. Here are the details I got.
Name: SAP_BASIS
Version: 700
SWCV: SAP BASIS 7.00
Available Support Packages: 12
Any more suggesions/feedback will be greatly appreciated.
Thanks

An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
Does anyone know what could cause this error message?
Thanks a lot for any hint.
Sergey

Hi Henry,
I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
Please let me know if this is unusual for this version.
Regards,
Arvind E

Valuation type while creating BOM

Hello Experts,
My requirement is that, I should be able to select valuation type of material in BOM. Please let me know, if there any setting where I can enter valuation type, while creating BOM.
We have two valuation types for my raw material - Local and Import. When we execute standard cost estimate, system picks up value appearing in material master (without valuation type). This value is average of both the valuation types. So we want that system should pick up valuation type, mentioned in BOM.
=
Deepak

Hello Deepak,
In go to CS01/CS02 select the line item and go to item overview and in that in the customer fields tab you can maintain the valuation type.
If customer field not available then with help of the user exit ''PCSD0002'' you add the customer filed in item.
It's not standard process, you have to do the development
I hope this information helpful to you,
Regards
Umesh Mali

Creating type along or inside a path

Hi All,
I read the tutorial about Creating type along or inside a path. I have tried to create few types of type along,inside and outside a path and shape. I was wondering why there are variations and restriction among them. Below are my screen shots to describe my problem.
Screen 1

Sorry, I have been trying to upload the screen shots, now it is done.
Screen 1: type outside the path
Screen 2:type inside the path
Screen 3:type outside the shape
Screen 4:type inside the shape
I am confused why I cannot flip the "type inside the path" whereas flipping inside and outside is possible for "type outside the path". Any help is greatly appreciated. Thank you.

TF10121: The path '' is not found or not supported. Type or select a different path. After SQL2012 install and Solution upgraded to VS2010

I have recently upgraded a solution from vs2008 to vs2010. This solution happens to contain several .rptproj file (SSRS 2008R2 reports). I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010).
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away. Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?

Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully.
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Stretching type while on a circular path?

Similar Messages

Maybe you are looking for