String not found in Table
I get a String not found in table on one of the Tabs in the properties area of many of my steps in TestStand. I had this error once before and it was due to the switch exec not being installed. I have downloaded the NISwitch and installed it yet I still have the error. Any ideas?
Hello Marc,
The Sequence Editor looks for those strings in the following INI file:
C:\TestStand\Components\NI\Language\English\TestStandStrings.ini
This INI file should have all the keys corresponding to the Switching tab under the [SEQUENCE_PROP_DLG] section. I am attaching the INI file that you can use instead of yours. You do NOT need to have Switch Executive installed for this INI to have the Switching keys. They all should come by default. This INI file didn't contain these keys in TestStand 2.0 since the Switching part was added in TestStand 2.0.1. The only reason for you getting the "String not found in table" error (that I can think of) is if somehow you are using the INI file for TestStand 2.0 instead of the new for
TestStand 2.0.1.
I think that using the attached INI file will solve your problem.
Regards,
Carlos Leon
Applications Engineer
National Instruments
Attachments:
TestStandStrings.ini 413 KB
Similar Messages
-
I first tried downloading Safari when the 5.0 update came out last year. When I choose the app in the dock, I get the blue top bar (Safari, File, etc) but nothing else loads. I uninstalled the app and tried again several times, but no success. For over a year now I've used Firefox as a result. Today I thought I'd try again, but same results. When I choose "new window" in the file menu, I get a small gray window with my bookmarks on top, then in a few seconds, the app quits unexpectedly and the report an error screen appears. I've unchecked all the languages in the information area for the app, cleared all history, cookies, and cache. Still the extensions tab in the preferences area has "LOCALIZED STRING NOT FOUND" in 4 places. It won't show what that means when I click the "?". Will I ever be able to use Safari again?
Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
-> Profile in use
* [http://kb.mozillazine.org/Profile_in_use]
Check and tell if its working. -
Hi , when i try to run my program, i keep getting the error msg:
Error(23,19): method getName(java.lang.String) not found in class javax.swing.JTextField
I have checked the java API and it inherits from the awt.Component class and should be accessible via the jtextfield.
I have tried the following:
trying to initailise the JTextField at the start.
Using getName works if i use it within the loop after setting the name.
Does anybody know what i am doing wrong please?
public class clsMember extends JPanel implements ActionListener {
private JButton jbtnLog;
private String surname;
private JTextField txtItem;
public clsMember() {
super(new SpringLayout());
makeInterface();
surname = txtItem.getName("Surname").toString();
private void makeInterface() {
//code omitted
for (int i = 0; i < numpairs; i++) {
JLabel l = new JLabel(strLabels, JLabel.LEADING);
this.add(l);
//if the array item is salutation create a combobox
if (strLabels[i] == "Salutation") {
jcomSalutation = new JComboBox(strSalutation);
jcomSalutation.setSelectedIndex(0);
this.add(jcomSalutation);
} else {
txtItem = new JTextField(10);
l.setLabelFor(txtItem);
txtItem.setName(strLabels[i].replaceAll(" ", "")); //this is where the label is set and if i do a system.out it shows fine. getName works here too.
this.add(txtItem);
//code omittedIf i have a loop that creates the jtextfields such as
txtItem = new JTextField(10);
l.setLabelFor(txtItem);
txtItem.setName(strLabels.replaceAll(" ", ""));
this.add(txtItem);How is it then possible to assign to a string the value of a *specific jtextfield*. Lets say that one of these JTextfields has the name surname.
How is it possible for me to writeString surname = surnamejtextfield.getText(); -
Hi Experts,
I'm implementing SAP note 1990492 which requires manual implementation. Implementation includes modifying standard tables (i.e. append
the structure FIEU_S_APP_H to table FIEUD_FIDOC_H). After this I've adjusted the table in SE14 (Database Utility). I've done checks in SE14 and it shows the table is consistent.
But during DB02 -> Space folder -> Single table analysis -> Input table name -> Indexes tab -> Upon clicking statistics, there is a warning "Column statistics not found for table".
Our basis team is implementing an Add-On in the development system related to RWD Context Sensitive Help. They cannot proceed due to the following inconsistencies found in the table.
Screenshot error from the activity:
Screenshot from DB02:
I'm an ABAP developer and have no other ideas on what to do. Thanks in Advanced.Hi All,
We were able to fix the issue through the following:
1. Call transaction
SE14.
2. Enter the name of
the table and choose "Edit".
3. Choose
"Indexes".
4. Select the index
and choose "Choose (F2)".
5. If you choose
"Activate and adjust", the system creates the index again and it is
consistent.
6. Check the object
log of this activation.
7. If an error
occurs, eliminate the cause and reactivate the index. -
Localized string not found & menu will not display in Vista
I have had an issue since late version 3 on my Vista Home Premium PC, when I installed a new copy and started seeing no menu, and the bookmarks and right-clicks respond with "Localized string not found..."
I have tried the cleanup in a previous message in this forum - to delete the safari folders c:\users\xxx\appdata\Local\ - once I reinstall the current version, I have the same issue. I see the previous query was closed, or I would have replied to that.
I am testing software for a web-based application, and we support Safari, so this is pretty important that we solve this - though I would be happy as a clam to drop support for Safari on the PC - that likely isn't going to happen. I have had no such issues on my G4 running OSX 10.4.Thanks!
Okay ... I suspect that one of the en.lproj folders (English language resource files) for your Safari or your Apple Application Support has been blown up. So we'll try swapping out both your Safari and your Apple Application Support, taking a few other explicit precautions along the way, just in case. Best to print out a copy of these instructions, because at one stage of proceedings you won't be able to use a web browser.
First download and save a copy of the SafariSetup.exe (installer file) from the Apple Website. Don't run the install online and don't start the install from the SafariSetup.exe just yet.
http://www.apple.com/safari/download/
Quit iTunes and/or QuickTime if you have them installed and running. (They both use Apple Application Support and can interefere with the Apple Application Support uninstall if you have them running.
Now head into your "Uninstall a program" control panel. Uninstall safari. Uninstall Apple Application Support.
(If you get any error messages during the uninstalls, halt proceedings and post back to let us know what they say. Precise text, please.)
Next, we'll clear away any leftover program folders and files.
Go "Start > Computer".
In "Computer", open "Local Disk C:" or whichever drive your program files are installed on.
Open the "Program files" folder.
Right-click on the "Safari" folder (if it still exists) and select "Delete".
Open the "Common Files" folder.
Open the "Apple" folder.
Right-click on the "Apple Application Support" folder (if it still exists) and select "Delete".
Empty your recycle bin and restart the PC. (If iTunes is installed on the PC, you'll probably receive a message at this stage saying that iTunes will not run because Apple Application Support is missing. Click through the message.)
(If you get any error messages during the program files/folders deletions, halt proceedings and post back to let us know what they say. Precise text, please.)
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now shut down all your security software (firewall, antivirus, antispyware).
Now start the Safari reinstall by doubleclicking the SafariSetup.exe you downloaded earlier. (This should also reinstall Apple Application Support.)
Reenable all security software prior to reconnecting to your network and/or the internet.
Did the reinstall go through okay? If so, do you have your Safari right-click contextual menus back again? -
The "Localized String not Found" thing..
has cropped up on my system. I have searched the forum and have read the K Tilfords post on the subject. I was going to reply to that thread but it has been locked.
Anyway, in that post it states:
"Normally the problem is very specific, within the WebKit.framework. The System>Library>Frameworks>WebKit.framework>Versions>A>Resources folder should have the folder English.lproj, but it's probably missing. If the English.lproj folder is present, then the Localizable.strings file within it is missing."
However, when I checked my system, the English.lproj folder is present. And, within English.lproj that Localizable.strings file is present as well.
Yet, I have the "Localized String Not Found" issue.
Thanks for reading. Help!No responses, so I'll update where things are.
After reading more in the forums, I decided to trash Safari and reinstall. So, I got rid of all things Safari, repaired permissions and restarted. Inserted my Tiger Install CD to do a Custom Install for the Safari app only but I get hung up on "Select Destination", before even reaching Custom Install.
It tells me since I have Tiger install, I need to modify my destination.
Any help or ideas appreciated.
Thanks -
Localized string not found in my cookies
my cookies say localized string not found how do I fix it.
FIXED with Apple Support help.
Deleted all 1 Password files in these locations:
Computer/Macintosh HD/Library/Input Method
Computer/Macintosh HD/Library/Input Manager
Computer/Macintosh HD/Library/LaunchAgents
Computer/Macintosh HD/Library/LaunchDaemons -
TestStand 4.2 Error String not found in language resource files
I've installed TestStand 4.2 on two Windows XP machines. On one machine it worked fine first time. On the other machine I receive the following message in the login box, and also in the templates pane: 'String not found in language resource files." I have tried uninstalling and re-installing TestStand twice but still get this error. This error prevents me being able to login as an administrator so I am unable to use TestStand 4.2. I understand that these language resource files are provided by the installer but for some reason it seems that the machine with the error cannot locate these.
The only difference between the two XP machines that I can find is the location of user profiles. I note that on Vista compatible TestStand versions that TestStand user settings are stored to C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines. On the XP machine with the error all user profiles are stored under C:\profiles, rather than C:\Documents and Settings. This is the standard profile used by our company so I am unable to change this. The TestStand installer does recognise this and installs TestStand user settings to C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\. Does anyone know whether the location of the user profiles is important, or whether there is another cause for this error?
Regards,
David
Solved!
Go to Solution.Hi Scott,
I've held off on the changes suggested by John for now. You are correct in that the knowledge base article referenced by John does not apply since the engine does initialise.
I've attached two screen shots. The first one is the standard login box which displays the "String Not found in language resource files" message in place of the usual "administrator" user name. If I overwrite the "String Not found in language resource files" user name with "administrator" and click OK to log in then I get an "Invalid User Name" error dialogue box. Therefore I am unable to log into TestStand.
The second screen shot shows the TestStand sequence editor with the String Not found in language resource files visible in the templates pane.
Regards,
David
Attachments:
TS Login Prompt.JPG 11 KB
TS Seq Editor.JPG 75 KB -
Entry not found in Table T706V
Hi,
When I simulate a trip I get error message "Entry not found in Table T706V Argument JSP IN 0022420080901 is missing".
Where JS is Trip provision copied from 40 Trip Provision. I am not undersatnding what is 00224.
When I try this in IDES , it works with 40 Trip Provision Variant.The same config gives error in other system with trip provision variant JS.
Rgds
PVThe problem was solved by changing expert control view in Travel.
PV -
ORA-01882: timezone region string not found
when i execute a package i am getting the following errror
ORA-01882: timezone region string not found
When i checked the net i found out the following solution
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
How can i proceed
how can i contact oracle support or any other solution to this problemHi ,
I pasted below some Oracle points about TIMEZONE......
TIMESTAMP WITH LOCAL TIME ZONE Datatype
The datatype TIMESTAMP WITH LOCAL TIME ZONE, which extends the datatype TIMESTAMP, includes a time-zone displacement. The time-zone displacement is the difference (in hours and minutes) between local time and Coordinated Universal Time (UTC)—formerly Greenwich Mean Time. You can also use named time zones, as with TIMESTAMP WITH TIME ZONE.
The syntax is
TIMESTAMP[(precision)] WITH LOCAL TIME ZONE
where the optional parameter precision specifies the number of digits in the fractional part of the seconds field. You cannot use a symbolic constant or variable to specify the precision; you must use an integer literal in the range 0 .. 9. The default is 6.
This datatype differs from TIMESTAMP WITH TIME ZONE in that when you insert a value into a database column, the value is normalized to the database time zone, and the time-zone displacement is not stored in the column. When you retrieve the value, Oracle returns it in your local session time zone.
In Example 3-4, you declare a variable of type TIMESTAMP WITH LOCAL TIME ZONE:
Example 3-4 Assigning a Literal Value to a TIMESTAMP WITH LOCAL TIME ZONE
DECLARE
logoff TIMESTAMP(3) WITH LOCAL TIME ZONE;
BEGIN
-- logoff := '10-OCT-2004 09:42:37.114 AM +02:00'; raises an error
logoff := '10-OCT-2004 09:42:37.114 AM '; -- okay without displacement
DBMS_OUTPUT.PUT_LINE( TO_CHAR(logoff));
END;
/I'm not sure if the above extract can help you....in this case give us some more info....
Regards,
Simon -
Please help me! when I open Safari, I am getting this message "LOCALIZED STRING NOT FOUND" instead my Home Page.
Thanks, I did it, it happens when I start Safari, if I click the Home icon, it goes to my home page "Google" also I note that bookmarks bar disappears, now I see only "localized string not found"
-
How to fix Safari 5.1 Preferences and Extensions from displaying "localized string not found"
I'm on a MacPro Dual Core, just recently upgraded to Lion but Since then Safari has been misbehaving.
First of all when I go into Safari Preferences in the Privacy section all that it shows is "Localized string not found" this shows up in all the button options of that section.
I also noticed the same problem, this time on the Preferences/Extensions secion when I installed the 1Password extension from Agile, which it's not working properly either, it actually displays the same "Localized string not found" copy in all of the items.
I'm following up on this issue with Agile but what makes me think that it's a Safari problem is the fact that this is also happening on the Privacy area of the Preferences even though I unistalled the 1Password extension.
Has anyone had similar issues, both with Lion's Safari 5.1 Preferences/Privacy or Extensions displaying "Localized string not found" or with 1Password not working properly?
Thanks in advance.Try troubleshooting the Safari .plist file.
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file to the Desktop.
Quit then relaunch Safari to test. If that helped, move the .plist file to the Trash.
~ (Tilde) character represents your Home folder.
For Lion: To see your Home library, hold down the Option key while selecting Go in the menu bar.
If deleting the .plist file didn't help, go to ~/Library/Safari/Extensions.
Move the Extensions.plist file to the Trash.
Restart your Mac. Try Safari.
Also, you may need to check the 1Password site for updates for Lion / Safari 5.1 compatbility. Apple is not responsible for updating third party software. -
Properties.setProperty(String, String) not found!
Version: IFS 1.0
Platform: Window NT 4.0
I wrote a javabean and put it in the custom_classes directory. When I ran it at the DOS's command prompt, everything worked fine, but when I ran it within the IFS's JWS, I got the error in the JWS console window as follows:
javawebserver: java.lang.NoSuchMethodError: java.util.Properties: method setProp
erty(Ljava/lang/String;Ljava/lang/String;)Ljava/lang/Object; not found
Here is what is being called in the javabean:
public class WorkFlowProperties extends Properties
public WorkFlowProperties()
throws Exception
setProperty("vince", "law");
What happend? Which version of JDK IFS's JWS is using? Where is the jar file that contains the java.util.Properties.class?
Thanks!
VinceSince until now no one answered this question, I had to work around it myself. I used the method put(Object, Object) instead of the error one setProperty(String, String). However, I still believe that someone from IFS should take a look at it.
Another problem, when I tried to create the object FileRead(String filename) in the javabean and if the filename is not found, it does not throw the correct exception "FileNotFoundException", instead it prints the error message in the JWS console as follows:
javawebserver: oracle.ifs.common.IfsException: IFS-0: Message unavailable
javawebserver: at java.lang.Throwable.<init>(Compiled Code)
javawebserver: at java.lang.Exception.<init>(Compiled Code)
Again, why????????
Thanks,
Vince -
Entries not found in table BSIS for a particular G/L Account
Hi,
When I display a Document through FB03 Eg. '3062000670', I can see that two G/L are being hit
3000 1 40 5700700 LHW 2,464,177.00
3000 2 50 1990990 GL-Initial BalUpload 2,464,177.00-
When I goto to the table BSIS to Display the lineitems of the G/L '5700700' , no entries are found.
I have to write a report based on the G/L Account .
Please help.
Salman ZahirThanks for your quick answer,
I have checked the table BSAS as well, it also has no entries corresponding the above G/Laccount.
I can find the entries in BSEG for that G/L, but since it does not have the G/L account as primary key
my program will take very long processing time as the user will give range of G/L accounts.
When I Check the Report FS10N with the same G/L account, and double click to see the lineitems
it also gives me the message 'no line items found' eventhough it shows some amount in the first screen.
Salman Zahir -
All fields are not found in Table Maitainence Generator
Hi all,
I have create a table with ZPFT_TRAY with 6 fields and created table maitainence generator for the table.
But when i check in SM30 i can see only 5 fields in Table maitainence generator.
will anybody let me know why it is showing only five fields.
Regards,
MadhaviHi madhavi,
do one thing delete your old table maintenance generator and again create a new TMG , generate it properly and save it and then check in sm30. and if u have defined your own data element then fill the field label of that data element and activate ur table. because when ever you do any modification in your Ztable then you have to create again table maintenance generator othervise your modification will not reflect in sm30.
hope this will help you.
Regards
Saurabh
Maybe you are looking for
-
Downloading two tables at a time
I have to show records from ekko table and on clicking any row the corresponding entries in ekpo should be displayed and then both the table entries should be downloaded to a excel file How should I do It
-
Dear all, While i'm trying to compile php5 for installing on Linux AS 3, I got the error message related to xml lib "configure: error: libxml2 version 2.6.11 or greater required". although i download libxml2-2.6.22-1.src.rpm from xmlsoft.org and rpmb
-
CUCM backup on Windows 7!
Hi all, I am facing problems while trying to backup my CUCM on Windows 7. I use freeSSHd, it was working fine on Windows XP and Windows Vista. I did tens of backups and restores so the configuration on CUCM and SFTP server are 100% correct (Server na
-
Stablish conditions between a data field in a query
Hello all, Firstly, I´ve got an infoCube "A" where every record has a field called "Init date" (date field) and another field called "finish date" In a query (that retrieves data for the infoCube A) there is a pop up with a date that user must enter
-
Pismo running Panther won't mount retail install disk
I'm appealing to the vast wisdom of the collective--cuz, man, I'm stumped... I just inherited a Pismo, which is currently running Panther 10.3.8. I don't have the original disks that came with it. I DO have a retail version of Panther, which I purcha