Strings panel tutorial for english spanish flash website

Greetings everyone,
where can i find a good strings panel for multiple language
flash website set up?
thanks in advance!!

i am looking for a tutorial. failed to mention this in my
initial post.

Similar Messages

Advice needed for beginner to Flash website building

Help!
I have zero knowledge about using Flash. I am being asked by my boss to build a flash web site for our music and video game stores. I built our old site in Dreamweaver.
Does anyone have advice on where i should start? A suggested book that will walk me through beginning to end. I've worked through a few tutiorials but I feel lost as far at the time line and actions.
Any expert advice is appreciated. I need to get started in the next month. I'd like to build it myself instead of outsourcing to someone else.
Know where I should start?

Lindsay,
Last month I built my first Flash website after following this tutorial on Lynda.com:
http://www.lynda.com/home/DisplayCourseN.aspx?lpk2=735
Needless to say the concept behind the tutorial was mind-opening, at least for me: I have a HTML/CSS background and I always used Flash almost only for banners, headers and simple animations.
Hope this helps...
JC

Preview image for videos on flash website. Help!

Hi, I'm not sure if I'm at that right place so sorry if I'm wasting your time by asking this question but I'm having problems with my flash website.
I want the video on my website to show a preview image before the video is played instead of it displaying a blank black frame. I went on component inspector - preview - and selected the frame of the animation that I wanted to be shown. But when I came to uploading my swf and html file the preview image for the video is still black. On component inspector - preview - it says 'To generate a runtime preview image, use the export button and load the image back by writing your own actionscript'. So I exported the image but I haven't got a clue how to write my own actionscript. I've spent hours trying to find help on this but I haven't been successful.
Do you know how I can sort this out? Thank you

Have a look at this tutorial: http://web.archive.org/web/20081012122149/http://www.monkeyflash.com/flash/poster_frame_fo r_flash_video/
If you still have questions, ask again.

Tutorial for making a Flash Tutorial

I would like to find a tutorial on how to make a Flash
Tutorial like
this
one or something similar.
Any help would be greatly appreciated!

http://www.adobe.com/products/captivate/
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
<--check this
*Must Read*
http://www.smithmediafusion.com/blog
"jackie_dec" <[email protected]> wrote in
message
news:esk3bo$3jq$[email protected]..
>I would like to find a tutorial on how to make a Flash
Tutorial like
>
http://www.alwaysonline.net/demos/DirectAdmin/Add%20New%20Domain.htm
or
> something similar.
>
> Any help would be greatly appreciated!
>

Need very basic tutorial for actionscript3 and Flash Builder?

I'm VERY new to coding, only 17 wishing to persure computer science when i'm older.
My issue is on adobe CC website all the tutorials require intermediate experience and I have none, however, i'm very passionate and think i will thrive with this new hobby.
Anyone know any tutorials on where you start with very basic basics in these applications?
Thanks.

Ask in the forums for those programs... the people who use the programs will know more than here
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Adobe DPS - pop-up panels video tutorial for Indesign Digital Magazine problem?

Hello Everyone
Trying to get info in a video tutorial for pop-up panels tutorial for a Digital Magazine I'm working on.
Had advice to do a Multi-State Object - but this is exactly what I need it for and would love a video link i(f any is around).
Doing a digital Tech Magazine - have about 12 images on a page.
Want to touch one image and want a pop-up text box with Tech info on this product come up - I want all other images on page to ghost out on doing this - and then I need a button to click to close the panel down and go back to document and ready to click on another picture.
Is there a tutorial online on how to do this. Hope someone has a link pleaae.
thanks: Daz

Here's the best way to attack this as a beginner.
Create multipage InDesign file with number of pages being equal to the
number of states you want for your MSO.
On the first page design the base state. Copy/paste everything to the second
page and now design the second state.
On and on until you're done. Now group everything on each page and
copy/paste in place everything into one page. Create the MSO.
This is going to give you a pretty heavy file but will give you a good
foundation for the thought process needed to do this.

Flash Websites - content panel

Hi There
I am new to flash and am looking for a tutorial which will help me create a specific end product. I am trying to make a flash website (which i have the designs for) which will have links down the right hand side, but when the link is clicked a content panel apears in the middle of the screen with the correct text in it and maybe a link to download a PDF, there will be a few links down the right hand of the screen and therefore different content for each link. the site will only consit of 1 page and the only thing which will change is this content panel which is centralised.
Any help would be very appreciated.
Thanks

I don't know of any specific tutorials for what you want to build, but it sounds like you should be able to create each section as a movieclip and use the buttons to make the current section invisible and the called section visible. What you might try doing to get started is to use Google and search for code related to whatever version of actionscript you'll be using in terms of making buttons work.

Bug in Flash 8 when using Strings Panel?

A problem with the strings panel in Flash 8 I have found is
that, when working with 6 languages, if you save and close down
your Flash file with the Strings panel hidden, and re-open the FLA
and then view the strings panel/view your text on the stage (or
open the xml file) that, in my cae, some EN strings have been
corrupted/mutated to other languages.
This is obviously a bug in Flash which corrupts one of the
XML files if the strings panel is closed. Why does it do this? Its
very annoying having to remember to open the strings panel whenever
I load that specific project, even if I am not going to use it. And
the panel takes up a lot of space as it is so can't leave it open
all the time for other projects.
Any ideas?

Howdy. I'm having a very similar problem. I'm working with 21
languages (including EN) on the strings panel in Flash 8. I've
found that my languages get corrupted -- EN strings get substituted
in for some, not all localized strings in the panel -- when I
publish or test the movie. I was publishing for Flash 7. When I
changed my publishing settings to Flash 8, the problem went away.
Have you gotten any answers to your problem?

Press 1 for English 2 for Spanish

Trying to deal with Verizon is maddening!!!
First I have to call tech support because of an issue on Verizon's end - which was not resolved but "hopefully" by Tuesday someone will be able to look into the matter - needless to say I pay almost $200.00 per month for this setller service.
But after I spend 45 minutes on my phone while they try to figure it out to no avail. Within 1 minute I recieve an automated call on my phone asking for me to take a survey about my experience.
HOWEVER - to do this I need to press 1 for English or 2 for Spanish......when I press 1 for English, the recording starts again, press 1 for English and 2 for Spanish and so on....it simply circled again and again, so of course I was not able to take that customer service survey.
Then for me to even come on the forum to post about the problem with the automated recording - again my username doesn't work, this is the third time this has happened. No it isn't my browser or operator error, it is Verizon website which they haven't fixed yet.
And, they still haven't fixed the issue when you call for support, they ask you for your account number - when you don't have internet service, and you have paperless billing - you - do - not - have - access to your account number.
I do not understand why Verizon has a limit on the number of calls you are allowed to block, because my phone has become useless, even though I pay for this service, I plugged it in recently again, and the spam phone calls continue.
And Verizon robo calls are unwanted as well. How do I block Verizon robo calls?

I had to call Verizon about a problem and got the IVR. It's horrible. Even the TV's noise and the dog barking would mess it up and I have to start over.

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter how i do this. The pop-up question returns EVERY time. What do i do to solve this issue???

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945

Enable full sreen For API youtube into flash website

Hie,
simple question ,it is possible to have the fullscreen button on the youtube players when the API is load into a flash website ?
I read this
fs
Values: 0 or 1. Default is 0. Setting to 1 enables the fullscreen button. This has no effect on the Chromeless Player. Note that you must include some extra arguments to your embed code for this to work. The bolded parts of the below example enable fullscreen functionality:<object width="425" height="344">
<param name="movie" value="http://www.youtube.com/v/u1zgFlCw8Aw?fs=1"</param>
<param name="allowFullScreen" value="true"></param>
<param name="allowScriptAccess" value="always"></param>
<embed src="http://www.youtube.com/v/u1zgFlCw8Aw?fs=1"
type="application/x-shockwave-flash"
allowfullscreen="true"
allowscriptaccess="always"
width="425" height="344">
</embed>
</object>
I see many http website having the expand in full screen button but I can't find API youtube into Full flash players web site
thx in advance,

Try the following link:
ftp://ftp.adobe.com/pub/adobe/reader/win/

License Adobe Acrobat XI for English North America but system Spanish

Hi,
I have the license for Adobe Acrobat in English North America because I nedd it in English. However my system 8Windows) is in Spanish. I installed Adobe Acrobat and when I launched it for first time appeared a warning message telling me that I have to change the language of Adobe because the licenses is for English. I do not how to change this because Adobe is in English.How I have to do this??
Thanks,

Follow these steps,
Launch Adobe Acrobat XI Pro
Navigate to Edit >> Preferences,
Select Language > Check the language (option) selected.
If it is different, change it to English.
(* sometimes you will not get an option for English language, in this case, select the other option than , 'as per operating system language'.)
Try relaunching the program.

NEWBIE - Best Practices for FLash Website Development

I've decided to try and build my own flash website, so to help me learn the basics I downloaded the following sample Dynamic Flash Template: http://info.template-help.com/pre-sale_questions/about_web_design_templates/article25.html.
I've been playing around with it a little bit, and feel like I definitely know a lot more than I did previously, but also feel like I may learning the most efficient and effective methods.
Basically, my questions are what's the best software / methods to do the following, as it relates to the template described above.
1) I want the site able to be viewed by people who have flash enabled and those who don't. I'd like for the default website to be flash oriented, but of the browser doesn't support flash or if there are no flash plug-ins installed, I want the HTML version of the site to display. What the best way to make this happen?
2) If I use the dynamic text option for the flash site, all text is pulled from the tfile_main.html file. Is this the best way to embed dynamic text into my flash file? Is it the most efficient way or should the dynamic text be embedded from the HTML pages of the Non-Flash site?
3) Is it possible to have the flash and non-flash versions overlay each other, where if flash is supported, the flash content is displayed, but if flash is not supported, only the non-flash versions are displayed?
4) What the best way of optimizing a site of this nature for search engines? If I were to upload only the flash version of the site, embedded in the index.html file, I think that the search engines would interpret my whole site as simply being one page, which I do not want. I want them to recognize each distinct page.
5) Should I use Static or Dynamic text? Should I insert any outgoing links with the flash file itself, or within the html files?
6) I've read alot about SWFObject2.x and it seems like it would help me do a lot of the things I'm wanting to do, but I have no idea how to use it. I downloaded the .zip file, but have no clue what to do with it from there.
7) I have Flash CS3, but also currently have a free trial of the Adobe Creative Suite Premium CS5, so I have FLash CS5, Dreamweaver CS5, etc. Should I use Flash CS3 or CS5?
8) How should I set-up my Publish Settings in FLash?
Sorry for such a long message and requesting so much info. If you can only help out or provide guidance on 1 of the above questions it would be very beneficial to me and greatly appreciated.
Thanks in advance for everyone's help and let me know if you need additional information.

No one is going to answer 8 questions, I certainly can't be bothered.
Cut them down in to different threads, in the relavent Adobe forum
But:
Use CS5.
You can use JS to determine if they have flash and show a style sheet/site accordingly, google it.
You can optimise flash sites too

Select 1 for English, 2 for Spanish

How do I go about providing for this option in a UCCX script? As I understand it, we'll have different agents taking the calls. Do I set up 2 separate Queues/CSQs, or do I assign skills to agents as necessary and use some facility in the script to check for those skills?
Any help would be appreciated,

In general you would have two distinct CSQs, one for each language you're supporting. You would skill your agents up appropriately, i.e: assign Spanish to Spanish speaking agents; and following a Menu Step you might set the CSQ appropriately.
Say you have a queue called "Sales" you might have the following Skills:
Sales
English
Spanish
Your CSQs might be as follows:
CSQ_Sales_EN
Sales
English
CSQ_Sales_ES
Sales
Spanish
And your agents:
John (speaks English and Spanish)
Sales
English
Spanish
Janet (speaks English only)
Sales
English
Marie (speaks Spanish)
Sales
Spanish
Finally, your script might look something like this:
This is a basic example, but it should get you started.
HTH
Tanner Ezell
www.ctilogic.com

JavaScript for English to Spanish?

I have a document that consists of 10 forms. The first page is in English and contains fields that our workers complete. These fields consist of names, phone numbers, dates, etc. What is inputted on this first page then populates to corresponding fields in the rest of the document that happens to be in Spanish. These documents are for our Spanish speaking clients.
My question is, on the first page the worker inputs the date as this 05/01/15. It is formatted to mm/dd/yy and the field name is AssessmentDate. One of the forms is a letter, in Spanish, that references the AssessmentDate field from the first page. I have named this new field SPAssessDate. I would like to have the date from the English field, AssessmentDate, formatted in the new field, SPAssessDate, as 01 de Mayo de 2015. Is this possible?
Thank you, Jamie

Yes, but you will need to write some custom scripting to get the exact format you are looking for.
Custom JavaScript calculation for SPAssessDate field:
var oField = this.getField("AssessmentDate");
if(oField == null) app.alert("Error accessing AssessmentDate field", 1, 0);
oDateObject = util.scand("mm/dd/yy", oField.valueAsString);
if(oDate == null) app.alert("Error convegting date to date object", 1, 0);
event.value = "";
if(oDate != null) {
event.value = util.printd("date(es){DD ' de ' MMMM ' de' YYYY}", oDateObject, true);

Strings panel tutorial for english spanish flash website

Similar Messages

Maybe you are looking for