Stripes down the center of pictures when I print them

When I print 4 pictures on a page, I get a stripe down the center of the bottom two pictures the material printed on the stripe is from the right hand side of the picture. One stripe (lower left picture) is 3/8" wide; the stripe on lower right is only 1/8" wide. This effectively ruins the print. It started about 3 weeks ago. Today I printed pictures again and it's still there. I just installed both black and colored ink.

Hi @teleklier , and welcome to the HP Forums!
I see you are having issues printing pictures. I'd like to help!
Does this issue occur when making a copy?
I'd recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Booklet Gutter Issue - When I print a booklet at 11x17, it causes a large white line down the center. But, when I try the same thing at 8.5x11 it prints side by side as it should. Help?

I have a 36 page booklet (each page is 8x5.5in). I have exported the booklet from InDesign as Pages. In Acrobat, when I select Print Booklet and 11x17 paper, it created a large white gutter down the center and the pages do not back up to each other.
I tried the same thing with 8.5x11 paper and they pages backed up to each other correctly with no white space down the center.
I tried again at 11x17 (size needed to print my booklet full size), and it's still causing the large white gutter. It's nearly half an inch or larger.
Help is VERY appreciated!

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

@How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

This sounds like you are using Photoshop Elements, and the Photoshop Elements forum would be best at answering that.
Photoshop Elements
Gene

White border around the picture when it prints

How do i get the white border off of my picture when i print my picture?

As mentioned above by hatstead tat all printers does not support border less printing so first of all check whether your printer is able to print border less. If yes then there are few steps to follow for MAC and WIN machines.
For WIN :-
Click on ‘Change settings…’ button and then by clicking on ‘Advance Settings…’ you will get your printer preferences dialog.
From printer preferences dialog you can check/select the checkbox/radio button for border less printing. This option is generally present under different tab for different printers like “Page setup tab for Canon Printers” or “Paper/Quality tab for HP printers” or “Main tab for EPSON printers”.
Once done and from PSE print dialog select appropriate paper and print size and click ‘Print’ button to get the border less print.
For MAC:-
f your printer supports borderless printing then you can find the entry for paper size with border less from ‘Select Paper Size’ drop down on print dialog.
Now select your print size from ‘Select Print Size’ drop down and click Print button to get the border less print.
Hope it would help you.
Cheers !!!

There are these weird gray growing lines going down the center of my iPod 4th gen what do i do?

I have had my iPod touch 4th gen for over a year now and i have these weird gray/green lines going down the center of the screen. They will not go away when i restart my iPod, and they only started when i came home from school and have kept growing please help!

Yo have hardware damage
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Apple - Support - iPod - Service FAQ

Yellow Line Down the center of the screen

I have a 2006 17" intel based iMAC running Leopard 10.5.8.
And when I booted it up a yellow line just appeared right down the center of my screen.
I've tried rebooting and zapping the PRAM and running FSCK. I called Apple support and a specialist told me to unplug it wait 30 seconds and restart it. But none of these worked.
Does anyone else have this issue and if so what did you do to fix it.
Oh and my Apple Care Extended warranty JUST expired a month ago.

I've got two of them...out of warranty. They do not go away.
They are annoying. Get the screen fixed while it's under warranty

White screen with grey stripe down the middle. What does this mean?

white screen with grey stripe down the middle. what does this mean?!!

Nope, Happen when I was in the middle of texting. 40% battery life too

After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!

Hi skt102711,
I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
Regards,
Rahul

Deskptop is compressed to a 6 inch strip in the center of the screen

it is an Apple Studio Display 21" CRT
everything was fine with the display, came in one day and brought the computer out of sleep mode and the display was messed up. the deskptop is compressed to a 6 inch strip in the center of the screen with black bars on the left and right.

Mission Control? It isn't a little bar in the center of the screen but does display the running apps. You can access it via the Control+Up arrow key combination and there are preferences for it in System Preferences.

When I get ready to burn my dvds they tend to be blurred. Even with pictures they do the same thing. When I preview them they blur while playing. But when I stop the video it becomes crystal clear.

When I get ready to burn my dvds they tend to be blurred. Even with pictures they do the same thing. When I preview them they blur while playing. But when I stop the video it becomes crystal clear.

Lamontsplace
Thanks for asking for clarification. Appreciated. I did not see you post 8 until after I posted my post 9.
Important that we define the issue as being related to just preview or to preview and export.
Project Preset....
When you start a new project, a project preset (project settings) need to be set by you or the project. The program
is designed to do that based on the properties of the first video file that you drag to the Timeline. Sometimes the program
does it right, sometimes not. If not, then you set the project preset manually assuring that the description of the project preset
matches your video properties for at least frame size, frame rate, etc. A major function of the project preset is to direct
the program to give you the correct space in the Edit area monitor for editing. If you select a project preset which includes
1920 x 1080 in its description, then the space in the Edit area monitor will reflect that 16:9 format.
If you or the program have set the correct project preset, then, when you drag your video to the Timeline for the first time, there
will be no colored line over its content. That means that you are getting the best possible preview in the monitor. Once you
edit that video, you will get an orange line over it. That is the program telling you that you no longer have the best possible preview
and to get it you Timeline render using the Render button above the Timeline. When that Timeline rendering is complete, the orange
line turns to green. That is the program telling you that you have the best possible preview which will be in effect until you edit the
file again. Then orange to green again.
Right now I would prefer to stay with trying to get your photos to an acceptable preview stage. No matter what the project preset,
these will need Timeline rendering after they are dragged to the Timeline. Several have reported that the use of the DSLR project preset results in sharper images pre and post export. I want to see if any of that can enhance your situation.
Please review and consider and then let me know if I am going in the right direction for the explanations. I will adjust
my instructions/suggestions accordingly.
More later.
Thanks again for the follow up.
ATR

I cannot access Siri using my iphone 5 earphones by pressing and holding down the center button on the earphones?

I cannot access Siri using my iphone 5 earphones provided with my phone. I press and hold down the center button on the earphones, but it doesn't activate Siri.

If you had checked the settings - you might have noticed that Siri isn't in the settings either. Siri is in the settings on the iPad 3, the iPad 4 and on the Mini.

I have lines from the top on the screen to the bottom the right one acts like the cursor now I have a transparent white line down the center of the screen about 1/8 inch thick. Anyone know what is causing this?

I have lines from the top of the screen to the bottom 4 lines. They are the size of the cursor and the one on the right acts like the cursor. Blinks. The other day I brought compuer up and I have a white transparent line right down the center of the screen about 1/8 inch thick. Does anyone know what is cauing this? Also computer is running slow.

Post a screen shot if you can by pressing cmd+shift+4 for only a certain section or cmd+shift+3 for a full screen shot.

HT201406 Ipod has orange stripes down the screen. SICK OF THE BS.

So I literally feel like I am about to hurl out of frustration. My Ipod 4 maybe 5, or 6 I really dont know, has been fine for about a year. Then one day I turn it on, the screen becomes unresponsive within 5 seconds of use and there are very very faint orange stripes down the background of the screen. I will say that my annoying brothers of mine cracked the screen once about 8 months ago, but it has been working perfectly even since then until about a month ago. I have tried to restore through itunes because it is obviously impossible to do it on the ipod itself, but OF COURSE I cant even find the freaking summary button which apparently leads to restore on 11.3.1. I'm at wits-end with this thing, and am ready for it to be FIXED, NOT REPLACED. PLEASE PLEASE PLEASE someone help me. Its IRRITATING and I am really just done with being frustrated.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also as necessary:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Will green line down the center of screen get worse?

Thin vertical green line just appeared down the center of my macbook pro. of course my apple care protection plan just expired two months ago.
Does anyone know the cause of this type of line? And if i do nothing will it get worse?

This is a problem with the screen. Eventually more lines will appear but that is because of those lines failing or one pixel on the line being stuck. It is like not something you caused and can only be fixed by replacement of the screen. You may perhaps try calling apple and seeing what they can do about it for you since applecare was so recent.

Stripes down the center of pictures when I print them

Similar Messages

Maybe you are looking for