Stripes in printout from HP5514

Hello. I am an owner of a HP Photosmart 5514 than usualy works very good. Recently I replaced the color ink cartridges to new ones and now I have white stripes at yellow and magenta when I do a diagnostic printout. I have used the fault tracing from HP support homepage without success. I have run printhead clean procedure couple of times and I have cleaned the connection pins. Technicaly everything looks great as far as I can understand exept for the printout. It still have white stripe at yellow and magenta. Cyan works good.

this print quality document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02914910&tmp_task=solveCategory&cc=us&dlc=en&lc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

Summary Printout from SAP.

Dear Gurus,
While giving printout from any SAP report, last page is printed with the summary of records which is not needed.
How do stop this page being printed.
Please guide.
Shailesh Panchal

I have solved it .. thansk

Printout from hp photo smart plus has orange haze

All printouts from my HP Photosmart Plus have an orange haze over the entire page: even when it is just black and white. I have checked the ink supply and the cartridge connection. One day it printed OK the next I have this problem.
Thanks for any help.
George Wilson

Hi @gbw88,
Welcome to the HP Support Forums. I gather that any printouts from your Photosmart Plus printer have a orange Hallow’enish haze on them.
You didn’t mention whether you had the Photosmart Plus B209 printer or the Photosmart Plus B210 printer so I’ve included the print quality trouble shooting document for both.
Fixing Print Quality Problems for the HP Photosmart Plus B209a, B209b, and B209c All-in-One Printer ...
Fixing Print Quality Problems for the HP Photosmart Plus e-All-in-One (B210a, B210b, B210c, and B210...
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printout from Telnet

Hi All,
I have a requirement where I need to print an ALV report from a custom transaction. When I run the report from SAP the print is coming fine. But when I tried to give the print from Telnet the connecttion is getting lost everytime. Not able to trace the problem. Do we need to do any setting to get the printout from Telent. Please help .
Thanks&Regards,
Manjula.S

Hi,
Please check the settings in SPAD or SOST.
Basically,in the SOST ,we can set the mail id's and Settings.Or else IE18N try once.
Regards,
Shiva Kumar

How can I eliminate the bottom strip of icons from my ios7 4s iphone?

How can I eliminate the bottom strip of icons from my ios7 4s iphone so I can the whole picture I've used as a wallpaper?

You cannot remove the Dock. You can move the app icons off the dock, move others onto the dock and keep the dock empty but you cannot remove the dock.

Help Please: White strips in printout using Illustrator CS5 Acrobat pro 9, and Adobe reader X

Hallo,
I have a big problem with printing PDF file using Illustrator CS5 Acrobat pro 9, and Adobe reader X , I get a white strip in printout. if I convert the PDF file to JPEG I get normal printout. Thanks in advance
OS: windows7 32 bit. 2 GB ram
Printer: HP C6280

Illustrator
File > Save As > Adobe PDF

Makepkg hangs at "Stripping debugging symbols from binaries [...]"

Hi,
I made a PKGBUILD for the io (programming language) virtual machine but makepkg hangs at:
==> Tidying install...
-> Removing info/doc files...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
The PKGBUILD:
# Contributor:
pkgname=io
pkgver=2008.03.30
pkgrel=1
pkgdesc="Virtual machine for Io, a small, prototype-based programming language"
url="http://www.iolanguage.com/"
arch=(i686)
license=()
depends=()
makedepends=()
options=()
conflicts=()
source=(http://github.com/tarballs/stevedekorte-io-4debb4b25740b8dd46ad16f43f04f0fc5b4a23e1.tar.gz)
md5sums=('')
build() {
mv $startdir/src/stevedekorte-io-4debb4b25740b8dd46ad16f43f04f0fc5b4a23e1 $startdir/src/$pkgname-$pkgver
cd $startdir/src/$pkgname-$pkgver
make vm || return 1
make INSTALL_PREFIX=${startdir}/pkg/usr install
rm -rf ${startdir}/src/io-2008.03.30/_build
has anyone a hint where to start searching for a solution? Or can anyone explain to me what "Stripping debugging symbols from binaries and libraries ..." in this context means?
Thanks,
hightower

Ok,
First of all thanks to shining.
I found the reason. The responsible piece of code:
for file in $(find {,usr/{,local/},opt/*/}{bin,lib,sbin} -type f 2> /dev/null || true); do
case "$(file -biz "$file")" in
*application/x-sharedlib*) # Libraries
/usr/bin/strip --strip-debug "$file";;
*application/x-executable*) # Binaries
/usr/bin/strip "$file";;
esac
done
As some filenames contain spaces they are split in the wrong way so the "filename storage" contains wrong file names. As several files contain " - " the script tries to read from stdin which causes the hang (I suppose). I'll file a bug report.
hightower
Last edited by hightower (2008-04-26 21:54:48)

How to strip text formatting from text field value ??

Hi everyone,
Have tried to get some info on this but no luck.... I've
created a simple contact form in Flash, but the URL which it's
generating contains the text formatting from the text input fields.
As a result the script that processes the mail send doesn't work.
How do I strip the text formatting out of text1, text2 and text3
before I use getURL() ??
on (release) {
url_var =
"your_name="+text1+"&your_e-mail="+text2+"&message="+text3;
getURL("contact.php?"+url_var, "_blank", "GET");
text1 = "";
text2 = "";
text3 = "";
}

text1.text = "";
text2.text = "";
text3.text = "";
…that should strip the textfields. You probably also
want to add this property (text) in the getURL()

IDVD is stripping most color from my images in my slideshow. Please help!

I have received so much help from this forum....
I am running iDVD 7.1.2 and Mavericks 10.9.5.
So I started an iDVD project about 18 months ago on a different computer.
I saved the project to an external HDD so I could move it from an iMac with a bad DVD drive to a MacBook with an awesome superdrive. This has always worked for me.
But I don't think think that information affects my current problem.... just tossing it out there because sometimes information we don't think is relevant is certainly relevant to a knowledgeable person!
Fast forward 18 months or so. I open the project on another computer, but iDVD is stripping all but the brightest colors from the images in my slideshow.
Is this a Mavericks thing?
I have tried, in numerous variations, even to the point of starting a completely new DVD project and dropping the images into the app..... still the same problem: all the images are mostly black and white (or gray tones at best), with the occasional colored brightest elements from the original photo. (It's a cool effect, just not appropriate or desirable for this particular project.)
I have tried the project on different computers, both with opening a new project and with building a new project. It just doesn't matter. The slideshow images lose color. Except, an interesting caveat is that if I pause the playback, click the previous slide button, then play: the image has full color again. But subsequent images are again B&WwC.
I figure it must be something awry with the settings in Wirecast.....
Thank you so much for any assistance.
Dee Dee

Hi
In what kind of format is Your photos ? .jpg, .tif, .bmp else
What size are they ?
How many ?
How many slideshow set's ?
You are aware of the 99 photos per serie limit. And 99 series/chapters limit per DVD disk ( not iDVD but DVD-Standard in general ).
Yours Bengt W

Word Printout from SAP

Hello, Iu00B4m using OLE to print out word files from SAP. Is there a setting to specify on which printer printouts are done. Currently I can only print on the standard word printer.
Sample Program:
REPORT Print_word .
INCLUDE ole2incl .
DATA: gs_word TYPE ole2_object ,
gs_documents TYPE ole2_object ,
gs_newdoc TYPE ole2_object ,
gs_actdoc TYPE ole2_object .
START-OF-SELECTION .
CREATE OBJECT gs_word 'WORD.APPLICATION'.
SET PROPERTY OF gs_word 'Visible' = '0' .
CALL METHOD OF gs_word 'Documents' = gs_documents.
CALL METHOD OF gs_documents 'Open' = gs_newdoc
EXPORTING #1 = 'D:\update.docx' .
CALL METHOD OF gs_word 'ActiveDocument' = gs_actdoc .
CALL METHOD OF gs_actdoc 'PrintOut' .
CALL METHOD OF gs_word 'Quit' .
END-OF-SELECTION.
FREE: gs_word, gs_actdoc, gs_documents, gs_newdoc .

Hi Mathias,
CALL METHOD document->print_document
EXPORTING prompt_user = 'X'
no_flush = no_flush
IMPORTING error = error
retcode = retcode.
will open the dialog so the user can change the printer. I don't know if you can set the default printer using method CONTROL_SET_PROPERTY of [Desktop Office Integration interface.|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf].
Regards
Clemens

IBooks Author strips tab stops from Table of Contents

Tab stops that are generated from section names are stripped from published iBooks Author files. When I click on Table of Contents in iBooks Author, I can see it exactly like it should be. Please see the screenshot that I have uploaded tabs.jpg.
Please note the Tab stops of the inspector that are in the screenshot. It shows clearly that I have made a number of tab stops and how it should be displayed. However, please download the following file to see how the tab stops are stripped from the .ibooks file that is created when I publish it:
http://ishqdesign.com/tabs/
I am in immediate need of a solution for a large book that I am in the process of publishing. Please advise.
Thanks,
J

The iBA Help has info on: table of contents
Which includes:
Each book comes with a table of contents that is updated automatically. You can view the table of contents at any time by selecting Table of Contents in the sidebar. The table of contents includes a default set of items, but you can change which items appear. A table of contents can include:
Chapter and section titles: All chapter and section titles are included in the table of contents by default. If you remove a section from the table of contents, all other sections that use the same layout are removed as well.
Text that uses specified paragraph styles: By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like. Paragraph styles appear in the table of contents only in portrait orientation. See Format text using styles.
The way the table of contents looks depends on the current page orientation. In landscape orientation (shown below), each chapter has its own contents page, with navigation buttons at the bottom. In portrait orientation, the entire book’s table of contents is visible as an expandable list.
Add or remove items in the table of contents
If the Document inspector isn’t open, click Inspector in the toolbar and click the Document Inspector button.
Click the TOC button.
Do either or both of the following:
To add an item: Click the Add pop-up menu , choose Add Paragraph Style, and choose an option from the submenu.
To remove an item: Select the item you want to remove and click the Delete button .

Strip port number from request

We recently upgraded our network and proxy servers. After the upgrade the proxy started adding port number of the origin web server to the request.
For example www.xxx.com became www.xxx.com:85 if backend web server was listening to alteon on port 85.
The response from the web server is keeping the port number. We would like to strip the port number off. www.xxx.com:85/foo -> www.xxx.com/foo.
This is only affecting us adversely in 301 and 302 redirects where we have to give new url to client
Message was edited by:
mshamber001

Ideally, the reverse proxy should be configured to correctly rewrite URLs for the servers it's reverse proxying. (For example, Sun Java System Web Server Proxy 4.0 can be used as a caching reverse proxy and load balancer. It will automatically rewrite the URLs used in 301 and 302 redirects.)
If for some reason it's not possible to configure the reverse proxy correctly, you can tell Web Server 7.0 which port to use in redirects using the <server-name> element in server.xml:<server-name>www.example.com:80</server-name>If you're using Web Server 6.1 (SP2 or higher), you must instead use the servername attribute in server.xml:<LS ... servername="www.example.com:80" />

IOS messages strips URL content from linked text sent from Messages Beta

My guess is that this is an unexpected edge case in the iOS version of Messages, where pre-Messages beta it didn't have to worry about link embedded in text. But when I copy a URL from an application such as Reeder or drag and drop a URL from the Safari URL field into Messages in pastes in with underlined text of the title of the page the link is for, with the embeded link. When this link is recieved on iOS devices just the text of the page title is recieved, rendered without the embeded link. Which let me tell you left my wife wondering what I was trying to say to her more than once. Maybe this will is already resolved in a version of Messages yet to be released for iOS devices.

Ralph, yes, I am not denying if you highlight the url and copy and paste it into the text field in messages, you definitely get the full url, and iOS handles this case properly as it recognizes the URL.
But if you click and hold on the favicon and drag away you get Blue text underlined like it was a clickable link, which it is. I did verify Firefox behaves the same way if you drag from the favicon.
If you send the link like that (embeded url) and the reciever is Messages beta on another Mac, or over AIM, likely Gtalk (jabber) as well it is handled properly as a clickable link. If the reciver is on an iOS device, iOS does not handle this properly and strips the embeded url in the link.
Below are images that illustrate
Underlined in Red is the ghosted grab from the favicon, built in screen capture unable to grab my mouse pointer but it ends up over "messages" in the ghosted title with the green "+" indicator.
Apologize for the size of this one, but that dragged URL dropped in a new message.
How this message shows up on iOS devices.
I know the workaround of copy and pasting the highlighted URL from the Safari URL field, but not all apps have this option, as I indicated Reeder for one when you are viewing an article there is a toolpar item to access several options for the article, one of them being copy URL - this must use the same method as Dragging and dropping from the Safari faviocn. Also many links that you bring up the contextual menu on in Safari and copy url end up pasting as embeded url links (Firefox does not do this). The workaround extends the workflow to open the article from a news feed in a browser, or click and load a link in Safari before the URL is exposed in the URL field before copy and pasting the url into messages, not very user friendly.
I hope this helps clarify the case.

Printout from Mail

When I print from mail the resulting sheet only prints 5 inches wide in the center of the standard paper sheet. The lines continue to wrap so a one page printout may be several pages in length. This started occurring without any changes on my part that I am aware of and I can find no settings to correct to reset the printing.
Printing from AppleWorks continues to be correct.
When I copy from email and open in AppleWorks the print is correct.
Any suggestions are most appreciated! Thank You

Check the thread called "Printing using Mail - Vertical printing over several pages error". Someone here just started having this problem and I am trying to see if there is a solution here. So far, no luck.

White flare/stripe on photos from direct light source

I have a problem very similar to this https://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/White-stripe-on-photos/td-p/909906 but i am not using flash. White stripe only shows when light is coming direct to camera from a light source like fluorecent lamp and from a particular angle.
Stripe shows in both portrait and landscape mode and always at same place. I am attaching 2 photos 1 taken in landscape and other in portrait.
I have a protecting cover but it is not covering the camera lens.
I think other z3 devices do not have this issue as i have searched a lot but i only found 1 other person facing this issue and i have shared the link above.
Can i know why this stripe shows on photos? Is it a known issue? Should i claim warranty?
landscape
Portrait

Few other things to check/try
settings > apps > all > camera > clear data > restart your phone
also you could repair your phone with PCC which I doubt it will make any difference
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
if nothing work contact your local Xperia Care
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Stripes in printout from HP5514

Similar Messages

Maybe you are looking for