Stroke issues - maybe file is corrupt?

ID CS3
Mac OSX 10.5.3
Intel core
2 GB ram
I am working with a very big file. It is 1 page, 2 feet x 2 feet and contains over 1000 graphic boxes, each with an imported tiff file. I know I'm pushing InDesign to its limits, but up until now, after installing extra ram and keeping the file at "typical" display, InDesign has been performing well.
The problem is that though all the objects have no stroke - i've verified this in the swatches and stroke palette - a light gray line appears around each of the boxes. in some places, the gray line does not continue around the entire box. Frame edges are turned off.
I thought that maybe it was just a preview issue and tried printing the file, but the gray stroke remained.
I've also tried copying and pasting the contents of the file into a new indesign file, but the strokes still remain then too.
So, if anyone has any ideas of how to tackle this, I'd be greatly appreciative!

>I've also tried copying and pasting the contents of the file into a new indesign file, but the strokes still remain then too.
What happens if instead of copying all of the contents of the original file, you copy only a small number. If that gets rid of the gray strokes, then try increasing the number copied over, until the problem reappears if at all.
If the problem occurs with only one object copied, try closing the original one, saving the new one, closing it, and reopen it. What then?
Also explore placing some of the tifs into a new fresh file. If the problem still shows, then it is nothing to do with the original file, but something in your installation. Try deleting the preferences.
Al
Edit: Does it happen in Tiger? Check that even if you have to take it to another computer.
Edit 2: Also try an inx round trip.

Similar Messages

The old win 7 x64 on a mac pro 1.1 issue - ISO file unreadable/corrupt

Hi all,
Trying to install win 7 x 64 on my mac pro 2,66 xeon 1.1. I knew beforehand there were issues, so I had prepared for them with the instructions given by flickguy here:
http://discussions.apple.com/thread.jspa?threadID=2207855
thing is, the resulting ISO file is unreadable in windows XP, is being seen as corrupt / unable to open by winrar , and the burnt DVD is shown as blank in snow leopard with all the latest updates.
I'm a bit clueless now as i have no idea at all what the problem is. if anyone has found or knows a solution to this, i'd be very grateful.
Thanks!

http://forums.macrumors.com/archive/index.php/t-467704.html
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
http://sergiomcfly.blogspot.com/2008/04/select-cd-rom-boot-type-when-installing. html
Working from Windows Vista, even in a VM, is one method.
Installing Windows on one drive partition, and from there installing 64bit to another drive partition.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

I am having issues when I shoot raw + jpeg. Raw files seem corrupt!!

I am having issues when I shoot raw + jpeg. It seems the raw files get corrupted. I have shot raw without an issue. It is only when I shoot raw + jpeg. The raw files will not show in Photoshop elements. I installed the Canon software and was able to see all the raw files; however, I noticed that when I tried to view some full screen they would not show. I also noticed that these raw files look block-ish. They appear more digital looking. Is there a specail card needed to shoot raw + jpeg? I formatted the ones that I have prior to using them.
Solved!
Go to Solution.

While it could certainly be a card-reader problem, data corruption of any kind can be any of the following:
1) the card
2) the cable (if used)
3) the card reader (if used)
4) the computer RAM,
5) thecomputer hard drive (or SSD)
A failure of any one of the above will result in corrupted images when viewed. Since it seems to be RAW file related, as they are signifantly larger than JPGs, it's likely anything but the card reader or cable.
The only way to 'beat it' is eliminate each of the possibilities, starting with the easiest/cheapest fix.
1) Use the cable. If that solves the problem, replace the card reader.
2) Use a different card. If that solves it, toss the old card.
3) If multiple sticks of internal computer RAM, swap them. If that fixes it, or, the problem 'moves' to other images, replace the RAM. It could be only 1 of 2 sticks bad, though, so use only 1 of the old sticks for a while to see if the problem recurs.
4) If you have multiple hard drives in your computer, or an external one, use that to store the photos for a while. If the problems go away, it's the drive. Note that hard drive failures typically start slowly and increase gradually. On occassion, though, your computer won't boot and it's all over. If you are down to thinking it's the hard drive, it's time to get a good backup...NOW!
For what it's worth, I had a similar problem with corrupted photos. Both RAW and JPGs were affected. But as the problems were after having loaded and initially viewed them on my HD, I knew it was a computer problem. It dogged me for a couple of weeks. I even played swap the memory sticks, pull one out and run on one only, swap the one for the other (running on one), and it STILL kept happening. I finally gave up and replaced both sticks of RAM. That solved the problem. So much for lifetime warranty from Hong Kong. A very well regarded brand of RAM, no less. My SSD drive was the next one on the list, it the new RAM didn't solve it.

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

FIX for USB issue where Files get corupted after I sucsessfully transfer to N

MP3 Player: Muvo N200 GB
Firmware: Creative MuVo Micro N200 Audible Firmware Upgrade .2.0
OS: Windows 2000 pro
Machine: Ibm Thinkpad
PROBLEM:
drag a folder of MP3's to the N200 in the Windows Explorer
2 wait for the zig zag line on the MP3 player to go straight.
3 Stop the Muvo mass stoarge device
4 Unplug the USB from the computer
5 Turn the Muvo N200 on
6 Folder has vanished
7 Plug Muvo back into computer
8 Folder is there, all files are missing
Also .. if I plug the Muvo in right after I coppied the files (after step 4) the files exist. I dragged them to the desktop, compared them to the originals with a binary compare and they are identical ... just to see if the files got corrupted.
It seems that when I turn the Muvo on, the files get deleted.
I then installed the N200 Media Explorer with drivers .. didn't help at all.
I tried this on a different machine, exact same files, and it works fine. Same OS, no Media Explorer.
Also, this is my second N200. Sent the other one back after talking with support. Got an error at the end of a format. When I tried to install the .2 firmware, I could no longer turn the player on (didn't try recover). I'm sure this N200 will do the same on my thinkpad. I installed the firmware on the other machine (fool me once ....)
EDIT: Further testing showed that this is a problem with my thinkpad. The N200 works fine as a thumb dri've on every other machine I tried. I tried using another thumb dri've on my Thinkpad and it failed in the same way. Also tried a Muvo NX .. just for kicks and it didn't work either.
FUnny thing is that I can copy a file to the N200, read it back right away .. compare them and they are identical. ONce I remove the dri've, and plug it back in, the file is corrupted.
Message Edited by chrisjc on 06-03-2005 03:5 PM
Message Edited by chrisjc on 06-03-2005 03:54 PM
Message Edited by chrisjc on 06-3-2005 0:26 PM

:smileyvery-happy:My N200 now works on my thinkpad, and I just have to report on what I did to fix it .. just in case this helps anyone however indirectly.
In the device manager, I changed all Host controllers from
Intel 8280CA/CAM USB Uni'veral Host Controller
to
Strandard Uni'versal PCI to USB Host Controller
And now My USB not only works on my N200, it also fixed an issue with my USB scanner.
HOW TO DO THIS:
Right Click on the My Computer ICON
select MANAGE
select Device Manager in the left hand column
expand Uni'versal Serial Bus Controller in right hand column
Click on Intel 8280CA/CAM USB Uni'veral Host Controller and
Select Driver Tab and select Update Driver
Next ... select radio button that says Display a list of Known.....
then select Standard...
do this for all Host controllers.
Good luck ... I've been through everything if you want to send me a message.

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I have an iphone 6 plus which show iphone disable connect to itunes. i tried to restore but it won't work and everytime it says "Iphone "Iphone" could not be restored because firmware file is corrupted disconnect and try again later"

last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

Protected View Error "The file is corrupt and cannot be opened"

All
I have a problem with Protected View in Office 2010 on Windows 7.
Symptom: When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened. This
is impacting both Word and Excel. I haven’t tested other applications. The user gets the error "The file is corrupt and cannot be opened.".
Expected behaviour: Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
Troubleshooting Results:
-      If I turn off Protected View the error goes away and the documents open without
issue (but not in Protected View obviously)
-      If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
-      If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
-      If I repair Office the problem is NOT fixed
-      If I reinstall Office the problem is NOT fixed
The problem doesn't impact all machines, but any new machine I build suffers the problem. All Protected View options are set by group policy and all machines are getting the correct settings.
-       The setting “Enable Protected View for files originating from the Internet” is enabled
-       The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
-      The setting “Enable Protected View for Outlook attachments” is enabled
-      Enable Data Execution Prevention mode is enabled
Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause? There are lots of postings on this around the various Internet forums, but most
just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
Thanks.
James.

Thanks for coming back, James, and I'm glad you've found the source of your
problem.
As an aside, I had no idea HP made software like that and will take a look
at it - or would if I could. Personally, although I love their hardware, I
wouldn't touch HP software, and the fact that their web page doesn't load
(in IE8) just reinforces my feeling.
Enjoy,
Tony
www.WordArticles.com
"jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
> Will, thanks for taking the time to post some suggestions. I understand
> Protected View perfectly well and my post is because Protected View is not
> behaving as it should. I think my dot points above show this, still,
> thanks for taking the time to post. I think Tony is more on track with
> his questions around what has changed in my build, and this is the area
> I've focused on over the few days since posting.
>
> I've pulled my build apart and put it back together and found the issue.
> This was tedious to say the least, but turned out worthwhile. A program
> we used called Trim Context Desktop
> (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
> is part of our SOE. This is a records management tool, but we only use a
> small feature set, and all the Office integration options that can be
> configured during install are turned off, but it turns out that the
> application still impacts Office. If I uninstall the Trim client from our
> SOE, Office Protected View starts working as expected. We knew the full
> Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
> we didn't use the Office integration features we were OK. All our testing
> was around the application and it works fine, I just didn't connect it to
> the Office issues until systematically eliminating changes from the SOE
> build. Keep a log of your changes!!! It helped me reverse things until I
> found the problem.
>
> Uninstalling Trim also fixes and issue I had in Outlook where the
> previewers wouldn't display Office documents, reporting that the
> previewers were not installed.
>
> We will go to HP to get some support and advice around this before putting
> Trim back in to the SOE.
>
> Anyone - if you have similar problems, can I suggest you look at all your
> Office add-ins and also any applications that may potentially hook in to
> Office.
>
> Cheers all.
>
> James.
>
>
>
Enjoy,
Tony
www.WordArticles.com

The iPod could not be updated because the firmware file was corrupt.

So i kept having this problem in this thread here: http://discussions.apple.com/thread.jspa?threadID=1226490&tstart=255
I decided that maybe doing a Restore on my iPod would maybe sort it out however i got that message "The iPod could not be updated because the firmware file was corrupt." when trying to restore. I then searched apple and found out that deleting the 'iPod Software Updates' folder would sort it out, it didn't.
Now what's happening is when i try to restore it comes up saying i have to download this iPod Software 1.2.1 for iPod so it downloads and then when it's finished i'm still getting the error message saying the firmware file is corrupt.
What can i do now? any help appreciated please.

this article actually sorted this problem out for me: http://docs.info.apple.com/article.html?artnum=304996
just to let you know

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

HT201210 I am stuck with "The iPad could not be restored because the firmware file was corrupt" message.

Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?

basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Windows 7 64-bit Copying files to external usb drive - files becomes corrupted.

Hi All,
I am getting intermittent problem with regards to copying files to usb external hard drive from my laptop.
When file is copied to external drive, the file becomes corrupt from the external drive.
I have to repeat around 2 to 3 times or more to re-copy the file again until file is not corrupted.
Appreciate of any help.
Below is my system info:
Using Win 7 Ultimate 64-bit 4 gb of ram.
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name GIBBY-LAPTOP
System Manufacturer Sony Corporation
System Model VGN-SR26GN_B
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2267 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. R1130Y1, 8/28/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Gibby-Laptop\Gibby
Time Zone Malay Peninsula Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.97 GB
Available Physical Memory 2.60 GB
Total Virtual Memory 7.93 GB
Available Virtual Memory 6.05 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys

Ok, lets be brief.
This problem is annoying me for years. It is totally reproducible although random. It happens when copying to external drives (mainly USB) when they are configured for "safe removal". I have had issues copying to NTFS and FAT32 partitions. I have
had issues using 4 different computers, from 7 years old to brand new ones, using AMD or intel chipsets and totally different USB controllers, and using many different USB sticks, hard disks, etc. The only common thing in those computers is Windows 7 x64 and
the external drives optimization for "safe removal". Installing Teracopy reduces the chances of data corrpution, but does not eliminate them completely. The only real workaround (tested for 2 years) is activating the write cache in the device manager
properties of the drive. In that way, windows uses the same transfer mechanisms as for the internal drives, and everything is OK.
MICROSOFT guys, there is a BIG BUG in windows 7 x64 external drives data transfer mechanism. There is a bug in the cache handling mechanism of the safe removal function. Nobody hears, I've been years talking about this in forums. It is a very dangerous bug
because it is silent, and many non professional people is experiencing random errors in their backup data. PLEASE, INVESTIGATE THIS. YOU NEED TO FIX SUCH IMPORTANT BUG. IT IS UNBELIEVABLE THAT IT IS STILL THERE SINCE 2009!!!
Hope this helps.

"Project or Library file is corrupt" when trying to open XControl

This is not a question, this is an account of my learning experience that I hope saves you from throwing your monitor through the wall.
When trying to open an XControl, I received the following error: "Project or Library file is corrupt"
Knowing Projects/Classes/XControls are all XML files, I opened the XControl using Notepad++ to see what was going on. The file structure is somewhat intuitive, and you'll be able to recognize many components of your library.
I used a binary search approach to find the offending XML by deleting all of the virtual folders, then seeing if the XControl would open. It did, meaning the headers of the XML were fine. Then I took the original file again, and deleted half the virtual folders to see if it would open, and it did not, meaning the offending XML was in a virtual folder I had not deleted that round. I took the original file, and deleted the other half of virtual folders, and it opened. I took the original file, and deleted only one virtual folder, and it opened. Aha! that virtual folder had only 5 items, and I knew one of the items must be the culprit.
Anyway, it only took about 10 minutes to narrow it down to an item that had a duplicate entry, two lines that were exactly the same:
After I deleted the duplicate item, the XControl opened up just fine! No data loss, no corruption.
How did the item get duplicated? Beats me. Could have been the product of a crash, some of my notorious renaming shenanigans, who knows.
Lessons learned:
Version Control (Source Code Control) is a hero, as usual.
Try poking around with the XML if you get corrupt libraries - it may be an easy fix, but your mileage may vary.
Don't even think about #2 unless you have #1 "under control"
Action Item for Applications Engineer: could you point this error to the Owning Developer? I would suggest this type of an error fail more gracefully, or at least with more information. Possibly, this type of error could self-correct silently since it's so easy to diagnose? Watching the library tank due to a benign issue nearly cost me a monitor and a monitor-sized area worth of sheetrock damage. ( )
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

I cannot find the result about this topic.
So I recreate a new project file
Hope there is better solution for this problem
thank you all
QIA
http://www.vitst.com
Virry Test & Control
LabVIEW Certified Developer

Stroke issues - maybe file is corrupt?

Similar Messages

Maybe you are looking for