Stroke scales when targeting a specific fill with "~" key in CC (17.1)

I often transform a specific fill within an object appearance by holding "~" while scaling, rotating, etc. I find, in CC the object stroke is scaled even though it is not targeted in the Appearance panel. This is now how CS5 works. If the stroke is not selected it should be ignored when scaling a given fill pattern.

Hi,
It is a memory or buffer related problem. Contact your BASIS.
Looks like there is a shortage of space. Analyse the dump in ST22 and look for its proposals.
OSS note 965351 might be applicable (if you are on 640/ unix).
regards,
NR

Similar Messages

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

Need help with automatic page when a box is filled with a letter

I use the Adobe Livecycle Designer 8.0, version 8.0.1291.1.339988.
I'm trying to make a test for cars in Livecycle, where the car is tested and then there should be a box after every kind of test such as: Brakes front, brakes back, parking brakes, lights, engine, oillevel, exhaust system, clutch and so on..
When a specific letter is written in the box a page should pop-up where the tester can write what the problem is. And then afterwards continune with the rest of the test.
In the box, there should be four choices, a G, R and A. When there's a G there shouldn't pop-up a page, because that part is fine. But when there's a R (reparation) and an A (remark), this page should pop-up with the text of what part of the car it is and a text-field where the mechanic that tests the car can write what needs reparing or what's a remark.
Can anyone help me? I really would appriciate it!
Jacob Langer

To support what King_Penguin has provided, here is a support document that describes the steps to take with a device in Recovery Mode. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Time field is filled with "0:00:00" problem

Dear,
I have three fields "Actual Hours","Actual Start","Actual End".User can fill "Actual Hours" or "Actual Start","Actual End" and calculate "Actual Hours" by "Actual Start" and "Actual End".
If the "Actual Start" field is filled with 0:00:00, if using the actual end time to minus the actual start time, the result should be 16, but the result is empty.
Quick feedback will be appreciated!
Best regards,
Hu Hongfeng
Tags edited by: Michael Appleby

Dear Jason,
Thanks for your replay!
I want to calculate 'Actual Hrs' by 'Time' and 'To' or directly fill the 'Actual Hrs' without 'Time' and 'To' ( that why i use special values)
Now when the 'Time' is filled with '0:00:00', it may judged none (you didn't fill any value).
e.g.
The 'Time' field is filled with '0:00:00' and the 'To' is filled with '8:00:00'. The correctly value of 'Actual Hrs' should be '8', but now can't calculate.
Best Regards,
Hu Hongfeng

Brushes have pixelated edge: when filled with color there's a white line at the border

Hello,
I'm trying to make geometric shapes that are black outlines filled with color. I'm drawing the shapes with the pen tool. When I fill them using the bucket tool, there's a pixellated white line separating the black outline and the color infill. How to do make the color fill directly to the black outline?
Thanks for your help,
DJ
CS4
OS 10.5.8

In addition to Chris's post wanted to advise you that stroke effects in Phothsop have rounded edges in Phothoshop. You will notice this on thin strokes (eg: 1 pxl).
Set the stroke to go on inside for squared edges, not center or outside. Adobe has been aware of this since CS, but has not been find a solution for Photoshop to handle this.

Problem with ANE - "ld: -pie can only be used when targeting iOS 4.2 or later"

I'm trying to compile a simple AIR Mobile app for iOS, incorporating an ANE to support Localytics
http://flashsimulations.com/2012/06/18/localytics-adobe-air-native-extension/
Compilation fails with the message "ld: -pie can only be used when targeting iOS 4.2 or later"
Surely 7.0 is later than 4.2! (I'm using Flex 4.6 - AIR 3.9 SDKS). Tried building with FDT and with Flash CC, and against earlier versions of the iOS SDK (6.0, 5.0).
Any suggestions?

thanks, but can you be more specific? Presumably I add something in this part:
    <iPhone>
        <InfoAdditions><![CDATA[<key>UIDeviceFamily</key>
                                              <array>
                                                  <string>1</string>
                                                  <string>2</string>
                                              </array>
                                              <key>UIStatusBarStyle</key>
                                              <string>UIStatusBarStyleBlackOpaque</string>
                                              <key>UIRequiresPersistentWiFi</key>
                                              <string>YES</string>]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>

Trunk mode vlan to a VM with 8 vNIC's - targetting one specific vNIC

Hi all
I've popped a question into the Powerhsell forum this morning, and realised it may have been more suitable in Hyper-V section due to the nature of the question. Apologies if dual posting is not the done thing.
My original question can be seen here:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/5b12e416-ffc9-4391-b3f1-91fdb192f11a/hyperv-trunk-mode-to-vm-how-to-target-a-specific-virtual-nic-using-powershell?forum=winserverpowershell
Essentially, my question is around a VM that currently has 8 x vNIC's, but needs to communicate over 9 x vlans at present. I have attempted the following command in a test environment, but I can't see how this would comms over a specific vNIC; it looks like
its a global command to the target VM:
Set-VMNetworkAdapterVlan -VMName test1 -Trunk -AllowedVlanIdList "1-5" -NativeVlanId 6
Is there a way to target a specific vNIC on a VM with the above command at all, or is there a better way to enable trunk mode to the intended VM please?
Thanks
Paul

Hi Eric
Thanks for reply.
Thanks - your reply got me thinking a little more about this, and I found another article (which was also a reply from yourself when someone asked about how you rename a network adaptor when every adaptor is called "Network Adapter"),
that lead to a working command for what I would like to achieve.
So, here is my working command now:
Get-VMNetworkAdapter -VMName test2 | Where-Object -Property MacAddress -eq "000000000098" | Set-VMNetworkAdapterVlan -Trunk -AllowedVlanIdList "2214-2217" -NativeVlanId 22
Upon running Get-VMNetworkAdapterVlan I can see how the various adaptors are now configured:
test2                    Network Adapter               Untagged
test2                    Network Adapter               Untagged
test2                    Network Adapter               Trunk    22,2214-2217
test2                    Network Adapter               Untagged
I appreciate my command may not be pretty, but it completes successfully in my lab in terms of applying the settings. Is there any obvious problems that you can see with the above?
Lastly, the reason for the vlans in this way is because the server is NetBackup Master Server, and needs comms over all the relevant vlans. I'm intending on configuring a secondary interface through the teaming GUI in Server 2012, and specifying vlan ID's
there.
Thanks
Paul

Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT

Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

Hello. I have AV player hd. When I touch and hold the Quicktime icon that is in a received mail message, a prompt comes up "Open in AVPlayerHD". I click on that and a black screen opens up with the following on it:
1--A red line at the top with a short white slider button on the right hand side. There is a time listed at each end of the red line that says 00:00
2--On the left hand side of the screen, near the middle, there are 4 icons, a colored 'x', a dialogue icon, a circular arrow and an 'i' in a circle.
3--On the right hand side there is a + and a - sign with '1.00x' in the middle of the two.
4--At the bottom of the black screen is a play icon plus forward and fast forward icons.
When I press the play icon it changes to a stop icon.
So, even though I have AV player I cannot play this Quicktime slideshow.
Any help would be appreciated. Thanks.

AIR 3.8.0.440 / iOS: build fails with "ld: -pie can only be used when targeting iOS 4.2 or later"

With AIR 3.8.0.440, iOS build with "adt -package -target ipa-ad-hoc" fails with a linker error:
ld: -pie can only be used when targeting iOS 4.2 or later
What's the correct option to suppress this error or does it need a fix for adt?
In the app.xml,
<key>MinimumOSVersion</key>
<string>5.0</string>
is already present in the iPhone InfoAdditions section.
(Building the same app with AIR 3.8.0.370 is fine)

Hi,
Can you make sure that both your old ane and new ane are not present in your extensions directory.
Also, how are you zipping/unzipping the ANE?
If you are on a Mac, try these steps on the terminal:
1) Create a new temp directory, say temp (mkdir temp)
2) cd temp
3) Copy the ane you need to make changes to into this directory.
4) unzip nameofane.ane
5) rm nameofane.ane
6) Make changes to the platform.xml file using a text editor or vim
7) cd to the temp directory again, (if you are now elsewhere)
8) zip -r nameofane.ane .
9) Copy the ane file created into your extensions directory, where you have placed the other extensions and then, package the IPA using adt.
If you are on Win,
1) Rename the .ane to .zip
2) Extract the contents of .zip
3) Make changes to platform.xml and save it.
4) Go back to the directory where you extracted the files, select all the folders/files and right click to zip them back.
5) Rename the .zip to .ane and then, package the IPA.
It should work.

[svn] 1941: Fix bug with writing out a MorphShape2 line style when it has a fill

Revision: 1941
Author: [email protected]
Date: 2008-06-04 12:13:17 -0700 (Wed, 04 Jun 2008)
Log Message:
Fix bug with writing out a MorphShape2 line style when it has a fill
connected to it. Had been calling encodeMorphFillstyles() directly
with an array of one element, but that adds a count byte (of value 1)
which should not be there. So I decomposed new method
encodeMorphFillstyle() out of encodeMorphFillstyles(). So not a big
change, but lots of indentation changes.
Other than that all changes were replacing the use of constant numbers
with static constants from FillStyle and also adding an equals()
implementation for FocalGradient.
reviewed by Pete Farland, passed flex checkin tests
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/types/FocalGradient.java

Hello,
We also have this problem ...
We are concluded, (??) When there is a note on the first or second line that starts in the block, justification and rebuilt and the problem happens! even made to change color of text on the blank page occurs ... our solution to an extra line at the beginning of the block without note or make it past the note on the previous page ...
when in a true solution?
Translation from French
Bonjour,
Nous avons aussi ce problème …
Nous somme arrivé à la conclusion, (???) quand il y a une note sur la première ou la deuxième ligne qui commence dans le bloc, justification et refaite et le problème arrive !!! même le faite de changé de couleur sur du texte les page blanche survient … notre solution mettre une ligne supplémentaire en début du bloc sans note ou faire passé le note sur la page précédente …
à quand une vrai solution?
Philippe

Has anyone experienced Labview 8.2 crashing when attempting wire a cluster filled with object and task references?

I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG ‏156 KB

There are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals.

Color shift when filling with pattern

Hello!
I use the 'define pattern' and 'fill with pattern' feature in photoshop all the time to prepare graphics for print / production in my business. However, I have noticed a small but problematic color shift going from the main image (defined pattern) to the page (filled with pattern). You can see it in the image included here. The main image is vibrant, and lighter and the page behind it is dull and darker. It will print this way too. The main image prints great, and gets approved. But the page layout doesn't match. Both documents are set to sRGB color space when I check the Edit -> Color Settings option. Any ideas how to correct this? Thanks!!

Hello, in your screenshot, the first tab in the background has no profile that's what (#) means in the title of the tab, untitled one and two have the same profile as the working space (which tab is visible?), while the one in the foreground as a different profile than the working space that's what (*) means in the title bar.
So, that tells me they do not have the same profile.
Also, is there noise or very small textures in the circles? You might want to look at them all with the same magnification.
Finally, a smart object can be of a different color space than the document that holds it.

When I want to go back a page the drop down box is filled with the current page, all earlier sites have disappered out of sight

When I have been at a site for a while and decide to go back, when I use the drop down box it has filled with the current page location. The longer I am there the more times it repeats its self.

Did you try Safe Mode?
An extension may be responsible for adding up those entries of the same page.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Stroke scales when targeting a specific fill with "~" key in CC (17.1)

Similar Messages

Maybe you are looking for