Strokes and reflection

Hi, I got of bit of the problem in illustrator. Using pen tool I drew lines (The ones on the right) wanted to copy them and have an a same stroke and shape on the left but problem is when I did that they've changed. What could I do so that I could copy them and rotating without losing the primary strokes?
Thank you

Estillo,
Or you may create the mirrored version(s) of the calligraphic brush(es) and apply that/those to the reflexion, and keep the strokes.
I tried to edit my first post, but too late.

Similar Messages

How can I get an ucropped image in a Custom Package when using Stroke and/or Border??

How can I get a picture in a Custom Package that has a Stroke and/or a border and get the image shown fully, and not cropped in one way or other?
When I add the stroke/border it adds them inside the cell, thereby altering the ratio of the area for the picture inside it, which crops it in some way. How can I get the image to be uncropped? The controls available seem to all be for the ration of the outside of the cell, but my image is inside the stroke/border and nothing seems to work on it directly ...
Many thanks,
Gary

Perhaps I misunderstood your requirement. I have been frustrated by LR print module and labs effectively squeezing individual shots into existing frames. So I have used LR2Mogrify to export (and then re-import) a 'new image' which manages the discrepancy between a crop and a cell of a different aspect ratio by adding padding - usually 'white' - around the image to a canvas corresponding to cell dimensions. Adding stroke borders can be accomplished in Mogrify inside or outside the image. A custom package, with multiple cell dimensions can be populated with images created in the corresponding aspect ratio(s) for the relevant cells.
I'm not aware of a way of automating the creation of cells in a page to dimensions which change with the crop as discovered - drag and drop images onto a blank page creates cells of the same standard size.

Document indesign in xml – stroke and fill the information content in a tag

I want stroke and fill the information contented in a tag. Inside this tag, could be several paragraphs with different styles in paragraph or character.

I want stroke and fill the information contented in a tag. Inside this tag, could be several paragraphs with different styles in paragraph or character.

Why doesn't Photoshop CS5 automatically scale strokes and effects?

I am looking everywhere for why Photoshop CS5 doesn't automatically scale strokes and effects. I could've sworn there was a preference in CS4 but there's nothing resembling this in CS5. Driving me crazy!
Whenever I do a Free Transform, the effects are completely out of whack and force me to waste time resetting them individually, layer by layer. I used to be able to grab any object or group of objects, do a transformation and Photoshop automatically recalculated. If anyone has a tip on how to avoid the annoyance of having to go layer by layer and forcibly adjusting that would be great.

Layer style effect setting are in absolute pixel size values so if you change the scale of a layer the style size remains the same. You can edit the layers style effects after tou do a transform on the layer and change the absolute setting. If the layer has been rastersized or flattened you can not. I have request that Adobe add support for relative settings like inches, cm, mm etc which is relative to the documents dpi resolution. This would be very helpful for recording actions.
However photoshop can scale existing layer style for you when you use Image Size there is a check box. If you need to scale a single layer and have its style scaled you need to do it in a round about way. Convert the layer to a smart object. Then instead of using transform double click on the layser smart object icon in the layers palette. Photoshop will open that layer embedded smart object in Photoshop for you to work on it.. Use Image Size to resize the layer up or down in size and check resample constrain and the scale style check box. Then use menu File>Save. Photoshop will then update the embedded smart object in the smart object layer and you can close the document Photoshop opened for you to work on the smart object.

Mac Book Pro Password - Husband had a stroke and can't remember

My husband had a stroke, and he can't remember the password on his Mac Book Pro. He'd really like to try to use his computer, and we want him to, as we hope it will help his recovery.

Very sorry to hear that. If you have 10.7 or above (or it's a newish Mac), reboot to the recovery partition - hold down cmd and R as you reboot. From the Utilities menu, choose Terminal, and type
resetpassword
and follow the prompts.
If you have 10.6 or earlier, you'll need the install DVD to accomplish the same. Insert it, reboot and immediately hold down C as it's booting up. Choose the install disk when you're prompted to. Follow the instructions here:
http://support.apple.com/kb/HT1274?viewlocale=en_US&locale=en_US
Matt

Suggestion: preview of Stroke and Fill commands

Instead of having to click OK to see the result then, if not happy, having to backtrack and try a variation any number of times, could we see the document updating as we change parameters in the dialogues of Stroke and Fill commands, please? This could be an option that the user can disable, of course.
Ps is the leading app of its kind but in some ways it seems to be clinging onto the early 1990s.

I confused myself earlier regarding the different stroke commands. Yesterday, I had been using "Edit > Stroke" and becoming frustrated with not seeing the result until after clicking OK, then having to repeat the process several times until the result looked good by trial and error. (Yes, I know that Layer Styles give a real-time preview when adjusting stroke, but in this particular case, Edit > Stroke was what I wanted to use.) Then I was working on another image and using "Stroke Path..." to apply a brush. The result wasn't quite right, so I had to backtrack, tweak the brush, apply again, and iterate the process numerous times.
I realise that a real-time preview of "Stroke Path..." would not help when the brush needs adjusted. It would be wonderful if the brush or other tool could be adjusted while the "Stroke Path..." dialogue is open, and have a real-time preview. So, my wish is best generalised to one of real-time preview of most manipulations that the user can make in most dialogues, and for all dialogues which do not absolutely need to be modal to be become non-modal. Changing brush controls while the "Stroke Path..." dialogue is open and seeing the displayed image updating in real time is just one special case of the general principle.
Our modern hardware easily supports such aids to creativity.

Default Stroke and Fill

I would like to remove the keyboard shortcut for default stroke and fill
With object selected, if I type D it changes fill to none and stroke to black. I just want to get rid of this shortcut. I can't find it listed in the keyboard shortcuts

In the Keyboard Shortcuts it's under
Tools
Apply Default Fill and Stroke Colors

E52 Date Display does not update and reflect the c...

Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?

Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!!

Can't seem to properly lock a box in place with a stroke and transparent fill (problem when trying to duplicate other elements)

Hey guys! So quick rundown: I'm an Art Director in advertising and sometimes I need to mockup banner ads. Most of them require a 1PX border all around, so I need to create a box with no fill but with a 1PX stroke and keep that as the top most layer. What ends up happening though, even if that layer is locked, if I try to duplicate another layer via "ALT + drag", it will duplicate the top most layer which is this 1PX border.
Mind you, I have Auto-Select set to Layer, and I can work around this by turning off the 1PX border, or using "CMD + J". However, sometimes I might forget to turn it back on, so would wanna find a proper fix for this issue, and "CMD + J" is just not as comfortable as "ALT + drag" with a Wacom tablet.
Any ideas on what can be done? I'm assuming PS sees even the transparent section of that box as a clickable object since it's technically covering the entire size of the canvas, but logically I would love for it to ignore the transparent fill.
Thank you!

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

IE 11 Crashs with Java 8 and Reflections

I have had a number of Dell PC's that are crashing when using Java and Reflections for the web 2014 I have tried a number of things. Removed old Java installs, reset IE, removed Java and re-installed. So far the only thing that helps is re-staging
the PC with the same updates and the same version of Java. The Java version we are using is 8.25. I am currently testing the following; remove all Java versions. Install Java version 7.17 ( this is the version Reflections installs when you do not have Java
installed). Anyone have any help?
Thanks.
Bill
MCSE MCP CCNA

Hi Bill,
Thanks for your reply.
Based on my knowledge, the issue is likely to be caused by the compatibiliy issue, so would you please use the tool autoruns to disable third-party services under IE and see if that helps:
1. Download and install autoruns
https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
2. Disable services under IE
If that didn't help, we may involve the java application vendor to check the issue together, for more information, please refer to:
https://social.technet.microsoft.com/Forums/en-US/b3474068-8b3b-469d-b279-53182bbc2429/ie-11-java-compatible-issue?forum=w8itproappcompat
Thanks for your time and please feel free to let me know if anything is unclear.
Best Regards,
Susie
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

[svn:fx-trunk] 10828: FXG stroke and fill translation fix

Revision: 10828
Author:   [email protected]
Date:     2009-10-02 10:41:48 -0700 (Fri, 02 Oct 2009)
Log Message:
FXG stroke and fill translation fix
http://bugs.adobe.com/jira/browse/SDK-23257 - Gradient translation should occur from 0,0, not the upper left bounds
The current API only passes in the shape's bounds. I have added a new targetOrigin parameter to IFill.begin, IStroke.apply and IStroke.createGraphicsStroke of type Point. It is the origin (0,0) of the shape in the target graphic's coordinate space.
Changed the logic in the gradient stroke and fills. The x and y transform properties are now positioned relative to the origin instead of to the top left corner of the bounds. If no x and y are set, then the default behavior remains the same.
Removed the centering logic in LinearGradientStroke when scaleX was set.
This API change has been approved by PARB.
QE notes: Need to add tests that exercise this logic
Doc notes: Need to document additions to the API
Bugs: SDK-23257
Reviewer: Deepa
Tests run: spark/primitives, gumbo/components
Is noteworthy for integration: Yes, modifications to the API
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23257
    http://bugs.adobe.com/jira/browse/SDK-23257
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapFill.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/IFill.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/IStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/SolidColor.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/SolidColorStroke.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/Line.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/Path.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/FilledElemen t.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/StrokedEleme nt.as

Stroke and drop shadows on thumbnails

Hi there. I'm trying to add a stroke and drop shadow to my lightbox thumbnails. While both appear perfectly in design mode, as soon as I view the site in preview or in a browser they both disappear. Do you know what the problem might be? Many thanks! David

Hi David,
I tested this with Composition Lightbox as well as with Slideshow Lightbox and stroke and shadow worked fine in both the cases. I applied the effects on the Normal State. Can you please confirm on what widget have you used and on what state have you applied the effects? Also, do you have a URL for us to take a look at?
Regards,
Aish

Clipping masks in ai CS5 deletes strokes and other crazy things

When creating a clipping mask, Illustrator CS5 deletes the stroke on the mask itself and when I add the stroke back in, it adds the same stroke to objects within the clipping mask.
In the file below, Figure 1 shows a rectangle with a black stroke and an orange circle with no stroke. Figure 2 shows the result of creating a clipping mask - the black stroke on the rectangle has been deleted. Figure 3 shows the result of adding the black stroke to the mask - it adds the stroke to the orange circle as well.
This is one of the many things about Illustrator that lead me to believe that the people at Adobe have never tried to work with their own programs. Why on earth would I want the stroke to be eliminated in the first place and why would I want it to be added to the items inside the mask when I go to replace it?
Is there something I should do differently or is this yet another oversight I'll have to work around forever?

Thank you to Larry and Scott! That's exactly right. I wasn't aware that by making a clipping mask you also make a group (and I'm not entirely sure that it logically should) but using the direct selection tool does the trick.
Thanks again,
Dave

Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

Reset Default Stroke and Fill on Path Tools

DUH! I've only done this task a million times before, and now I’m flummoxed. About the third weird thing in as many weeks . . .
Here's what is what: a file I've used before with no problems, suddenly will not let me reset the default settings of no fill and 1 pt black stroke on the path tools. I know how to do it - make sure nothing is selected and then reset the default. Easy peasy.
After I reset, it shows the default settings everywhere (tools panel, control panel, swatches panel) then after drawing the path, the object has no fill and no stroke. I've reset many times and finally understand the definition of insanity: doing the same thing over and over and getting the same result!
I've also tried creating a local defaul with a Cyan fill and a Red stroke, and everything looks good to go, until I draw the rectangle. Then it's no fill and no stroke again.
I'm almost embarrassed asking this question, but now I’d like to know if there is an answer. Is it possible the file is corrupted? If so, is there anything one can do to save the file? I tried doing a Save As and converting it to CS6 but that didn’t work. I’ve rebuilt the Preferences (again).
Thank you (she says, sheepishly)
P. Bell

Thanks, Michael.
You got me thinking about the Object Styles.
I went in and found the Basics Graphic Frame was messed up, so I Redefined the Style and now everything is working.
I needed some fresh perspective. Thanks to you and Bhatnagar for responding to my question.
P. Bell

Strokes and reflection

Similar Messages

Maybe you are looking for